For an ideal gas condition, what is the mass (g) of N2 if the pressure is 2.0 atm, the volume is 25 mL and the temperature is 290 Kelvin.

Answer:

2.81 g of H2O.

Explanation:

We'll begin by calculating mass of O2 that contains 1.25×10²³ molecules O2.

This can be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ molecules. This implies that 1 mole of O2 also contains 6.022×10²³ molecules.

1 mole of O2 = 16x2 = 32 g.

Thus 6.022×10²³ molecules is present in 32 g of O2,

Therefore, 1.25×10²³ molecules will be present in =

(1.25×10²³ × 32) / 6.022×10²³ = 6.64 g of O2.

Therefore, 1.25×10²³ molecules present in 6.64 g of O2.

Next, the balanced equation for the reaction. This is given below:

CH4(g) + 2O2(g) —> CO2(g) + 2H2O(g)

Next, we shall determine the masses of CH4 and O2 that reacted and the mass of H2O produced from the balanced equation.

This can be obtained as follow:

Molar mass of CH4 = 12 + (4x1) = 16 g/mol.

Mass of CH4 from the balanced equation = 1 x 16 = 16 g

Molar mass of O2 = 16x2 = 32 g/mol.

Mass of O2 from the balanced equation = 2 x 32 = 64 g

Molar mass of H2O = (2x1) + 16 = 18 g/mol.

Mass of H2O from the balanced equation = 2 x 18 = 36 g

From the balanced equation above,

16 g of CH4 reacted with 64 g of O2 to produce 36 g if H2O.

Next, we shall determine the limiting reactant.

This can be obtained as follow:

From the balanced equation above,

16 g of CH4 reacted with 64 g of O2.

Therefore, 1.25 g of CH4 will react with = (1.25 x 64)/16 = 5 g of O2.

From the above calculations, we can see that only 5 g out of 6.64 g of O2 is needed to react completely with 1.25 g of CH4.

Therefore, CH4 is the limiting reactant.

Finally, we shall determine the mass of H2O produced from the reaction.

In this case, the limiting reactant will be used because it will give the maximum yield of H2O.

The limiting reactant is CH4 and the mass of H2O produced from the reaction can be obtained as follow:

From the balanced equation above,

16 g of CH4 reacted to produce produce 36 g if H2O.

Therefore, 1.25 g of CH4 will react to produce = (1.25 x 36)/16 = 2.81 g of H2O.

Therefore, 2.81 g of H2O were obtained from the reaction.

The mass in grams of H₂O which can be formed when 1.25g CH₄ are combined with 1.25×10²³ molecules O₂ is 2.8 grams.

Stoichiometry of any reaction tells about the amount of species present before and after the completion of the reaction.

Given chemical reaction is:

CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

Moles of CH₄ will b calculate as:

n = W/M, where

W = given mass = 1.25g

M = molar mass = 16g/mol

n = 1.25/16 = 0.078 moles

Molecues of CH₄ in 0.078 moles = 0.078×6.022×10²³ = 0.46×10²³

Given molecules of O₂ = 1.25×10²³

Required molecules of CH₄ is less as compared to the molecules of O₂, so here CH₄ is the limiting reagent and formation of water is depends on it only.

From the stoichiometry of the reaction it is clear that:

1 mole of CH₄ = will produce 2 moles of H₂O

0.078 moles of CH₄ = will produce 2×0.078=0.156 moles of H₂O

Mass of H₂O will be calculated by using its moles as:

W = (0.156)(18) = 2.8g

Hence required mass of H₂O is 2.8g.

To know more about limiting reagent, visit the below link:

https://brainly.com/question/1163339

Answer:

Percentage lithium by mass in Lithium carbonate sample = 19.0%

Explanation:

Atomic mass of lithium = 7.0 g; atomic mass of Chlorine = 35.5 g; atomic mass of carbon = 12.0 g; atomic mass of oxygen = 16.0 g

Molar mass of lithium chloride, LiCl = 7 + 35.5 = 42.5 g

Percentage by mass of lithium in LiCl = (7/42.5) * 100% = 16.4 % aproximately 16%

Molar mass of lithium carbonate, Li₂CO₃ = 7 * 2 + 12 + 16 * 3 =74.0 g

Percentage by mass of lithium in Li₂CO₃ = (14/74) * 100% = 18.9 % approximately 19%

Mass of Lithium carbonate sample = 2 * 42.5 = 85.0 g

mass of lithium in 85.0 g Li₂CO₃ = 19% * 85.0 g = 16.15 g

Percentage by mass of lithium in 85.0 g Li₂CO₃ = (16.15/85.0) * 100 % = 19.0%

Percentage lithium by mass in Lithium carbonate sample = 19.0%

Answer:

[tex]91°C[/tex]

Explanation:

CHECK THE COMPLETE QUESTION BELOW;

Suppose that 0.95 g of water condenses on a 75.0 g block of iron that is initially at 22 °c. if the heat released during condensation is used only to warm the iron block, what is the final temperature (in °c) of the iron block? (assume a constant enthalpy of vaporization for water of 44.0 kj/mol.)

Heat capacity which is the amount of heat required to raise the temperature of an object or a substance by one degree

From the question, it was said that that 0.95 g of water condenses on the block thenwe know that Heat evolved during condensation is equal to the heat absorbed by iron block.

Then number of moles =given mass/ molecular mass

Molecular mass of water= 18 g/mol

Given mass= 0.95 g

( 0.95 g/18 g/mol)

= 0.053 moles

Then Heat evolved during condensation = moles of water x Latent heat of vaporization

Q= heat absorbed or released

H=enthalpy of vaporization for water

n= number of moles

Q=nΔH

Q = 0.053 moles x 44.0 kJ/mol

= 2.322 Kj

=2322J

We can now calculate Heat gained by Iron block

Q = mCΔT

m = mass of substance

c = specific heat capacity

=change in temperature

m = 75 g

c = 0.450 J/g/°C

If we substitute into the above formula we have

Q= 75 x 0.450 x ΔT

2322 = 75 x 0.450 x ΔT

ΔT = 68.8°C

Since we know the difference in temperature, we can calculate the final temperature

ΔT = T2 - T1

T1= Initial temperature = 22°C

T2= final temperature

ΔT= change in temperature

T2 = T1+ ΔT

= 68.8 + 22

= 90.8 °C

=91°C

Therefore, final temperature is [tex]91°C[/tex]

The final temperature of the iron block is 91∘C.

Given that;

Heat lost during condensation of the water = Heat gained by iron block

Mass of water(mw) = 0.95 g

Latent heat of vaporization =  Latent heat of condensation(L) = 44.0 kJ/mol

Mass of iron(mi) = 75.0 g

Initial temperature of iron(T1) =  22∘C

Final temperature of iron(T2) = ?

Heat capacity of iron(ci) =  0.449 J⋅g−1⋅∘C−1

So;

mwL = mici(T2 - T1)

Substituting values;

(0.95g/18g/mol) ×  44.0 × 10^3(J/mol) = 75.0(g) × 0.449 J⋅g−1⋅∘C−1 (T2 - 22∘C)

2322.2 = 33.7T2 - 741.4

2322.2 +  741.4 = 37.4T2

T2 = (2322.2 +  741.4)/ 33.7

T2 =91∘C

Missing parts;

Suppose that 0.95 g of water condenses on a 75.0 g block of iron that is initially at 22 °c. if the heat released during condensation is used only to warm the iron block, what is the final temperature (in °c) of the iron block? (assume a constant enthalpy of vaporization for water of 44.0 kj/mol.)

Learn more: https://brainly.com/question/9352088

Answer:

THE VOLUME OF THE OXYGEN GAS AFTER DEFLATION TILL A PRESSURE OF 735 TORR IS ATTAINED IS 7836.99 L

Explanation:

Using Boyle's law,

P1V1 = P2V2

P1 = 150 atm

V1 = 50 L

P2 = 735 Torr

V2 = unknown

We must first convert the pressures into the same SI unit for easy calculation

1torr = 1/760 atm

So converting 735 torr to atm; we have:

1 torr = 1/ 760 atm

735 torr = 735 * 1 / 760 atm

= 0.967 atm

In other words, P2 = 0.957 atm

So rearranging the formula by making V2 the subject of the equation, we have:

V2 = P1 V1 / P2

V2 = 150 * 50 / 0.957

V2 = 7836.99 L

The volume of the oxygen cylinder after deflation to a final pressure of 735 torr or 0.967 atm pressure is 7836.99 L.

Answer:

ΔH∘rxn of the reaction is -521.6kJ

Explanation:

Complete question: "Calculate the value of ΔH°rxn for 2F2(g)+2H2O(l)⟶4HF(g)+O2(g)"

You can find the ΔH of a reaction by the algebraic sum of similar reactions (Hess's law) as follows:

(1) H₂(g) + F₂(g) ⟶ 2HF(g) ΔH∘rxn=−546.6 kJ

(2) 2H₂(g)+O₂(g)⟶2H₂O(l) ΔH∘rxn=−571.6 kJ

Subtracting 2ₓ(1) - (2)

2ₓ(1) 2H₂(g) + 2F₂(g) ⟶ 4HF(g) ΔH∘rxn=2ₓ−546.6 kJ = -1093.2kJ

-(2) 2H₂O(l) ⟶ 2H₂(g)+O₂(g) ΔH∘rxn=- (-571.6 kJ) = 571.6kJ

2ₓ(1) - (2) 2F₂(g)+ 2H₂O(l) ⟶ 4HF(g) + O₂(g)

H₂(g) are cancelled because are the same in products and reactants

ΔH∘rxn = -1093.2kJ + 571.6kJ

ΔH∘rxn = -521.6

Answer:

C. electronegativity

Explanation:

THE ELEMENT WITH THE GREATE ELECTRONEGATIVITY IS ASSIGNED A NEGATIVE OXIDATION NUMBER EQUAL TIO ITS CHARGE

Answer:

The 3rd one

Explanation:

Answer:

AS WE KNOW THAT , when non-metallic elements gain electrons to form anions, SO sulphur is non metal and have the capacity to gain two electrons as lies in 6th group so it can gain electron and become sulphide ion(S-).

Explanation:

Answer:

Methyl radical

Explanation:

A radical is any specie that contains an odd number of electrons. We must note that the greater the number of alkyl groups which are attached to a carbon atom that bears the odd electrons, the more the degree of delocalization of the odd electrons and consequently the more stable we expect the free radical to be.

Hence the order of free radical stability is; Methyl < Primary < Secondary < Tertiary. Hence, we can easily see that the methyl radical is the least stable free radical.

Answer: Methyl radical

Explanation:

Answer:

B.3/5p

Explanation:

For this question, we have to remember "Dalton's Law of Partial Pressures". This law says that the pressure of the mixture would be equal to the sum of the partial pressure of each gas.

Additionally, we have a proportional relationship between moles and pressure. In other words, more moles indicate more pressure and vice-versa.

[tex]P_i=P_t_o_t_a_l*X_i[/tex]

Where:

[tex]P_i[/tex]=Partial pressure

[tex]P_t_o_t_a_l[/tex]=Total pressure

[tex]X_i[/tex]=mole fraction

With this in mind, we can work with the moles of each compound if we want to analyze the pressure. With the molar mass of each compound we can calculate the moles:

moles of hydrogen gas

The molar mass of hydrogen gas ([tex]H_2[/tex]) is 2 g/mol, so:

[tex]6g~H_2\frac{1~mol~H_2}{2~g~H_2}=~3~mol~H_2[/tex]

moles of oxygen gas

The molar mass of oxygen gas ([tex]O_2[/tex]) is 32 g/mol, so:

[tex]64g~H_2\frac{1~mol~H_2}{32~g~H_2}=~2~mol~O_2[/tex]

Now, total moles are:

Total moles = 2 + 3 = 5

With this value, we can write the partial pressure expression for each gas:

[tex]P_H_2=\frac{3}{5}*P_t_o_t_a_l[/tex]

[tex]P_O_2=\frac{2}{5}*P_t_o_t_a_l[/tex]

So, the answer would be 3/5P.

I hope it helps!

Answer:

Zeros located at the end of significant figures are significant.

Explanation:

Hope it will help :)

Answer:

Below

Explanation:

Let n be the quantity of matter in the Calcium Bromide

● n = m/ M

M is the atomic weight and m is the mass

M of CaBr2 is the sum of the atomic wieght of its components (2 Bromes atoms and 1 calcium atom)

M = 40.1 + 2×79.9

● 0.422 = m/ (40.1+2×79.9)

●0.422 = m/ 199.9

● m = 0.422 × 199.9

● m = 84.35 g wich is 88.4 g approximatively

88.4 g approximatively is  the mass in grams of 0.442 moles of calcium bromide, CaBr2 ,therefore option (d) is correct.

Mass is the amount of matter that a body possesses. Mass is usually measured in grams (g) or kilograms (kg) .

To calculate mass in grams of 0.442 moles of calcium bromide, CaBr2,

Let n be the quantity of matter in the Calcium Bromide

M is the atomic weight and m is the mass

M of CaBr2 is the sum of the atomic weight of its components

Mass of  Ca = 40.1 , Mass of Br = 79.9

M = 40.1 + 2×79.9

  0.422 = m/ (40.1+2×79.9)

  0.422 = m/ 199.9

  m = 0.422 × 199.9

  m = 84.35 g which is 88.4 g approximatively .

Thus ,88.4 g approximatively is  the mass in grams of 0.442 moles of calcium bromide, CaBr2 , hence option (d) is correct .

Learn more about  mass ,here:

https://brainly.com/question/6240825

#SPJ2

Answer:

1. In the compound, H3C-NH-CH2-CH3, there are no chiral centers present, chiral centers refer to the configuration in which carbon is attached with four different groups. In the molecules, as there are no chiral centers, therefore the molecule is optically inactive, that is, it will not demonstrate pair of an enantiomer is one of the essential characteristics of optically active compounds is the possession of enantiomeric pairs.  

2. On the nitrogen of aniline, the lone pair of electrons can produce hydrogen bonds, play an essential function in basicity, play an essential role in dipole moment or polarity, and wit the increase in solubility there is an increase in the formation of the hydrogen bond, eventually increasing to boiling point. However, the melting point is not affected. As the melting point is the characteristic of the packing efficacy of a molecule and does not rely upon the anilinic nitrogen's lone pairs.  

3. With the increase in the tendency to donate an electron, basicity increases. However, if the electron is taking part in resonance, the donation will not take place easily, and the compound will be the least basic. Apart from cyclohexyl amine, in all the other given compounds, the lone pair of nitrogen takes part in the process of delocalization or conjugation. Thus, cyclohexyl amine will be most basic as the lone pairs are easily available for donation.  

Answer:

d. None of the above

Explanation:

A buffer works when pH of the buffer is ± 1. Out of this range, the buffering capacity is very low.

Acetic acid, CH₃CO₂H, has a pKa of 4.74. That means its buffering capacity is between 3.74 and 5.74 of pH. Is not a good buffer to pH 7

Pyridine is a weak base with pKa of 5.52. Its buffering capacity is between 6.52 and 4.52. Is not a good buffer to pH 7

HCl is a strong acid. Just weak acids and bases can produce a buffer with its conjugate base. HCl can't produce a buffer.

Thus, right answer is:

Answer:

CH3CO2H

Explanation:

A weak acid, such as acetic acid, paired with its conjugate base (here, the acetate ion) will be an ideal system for creating an acidic buffer solution with a pH below 7.

Answer:

The volume of the container is 59.112 L

Explanation:

Given that,

Number of moles of Oxygen, n = 3

Temperature of the gas, T = 300 K

Pressure of the gas, P = 1.25 atm

We need to find the volume of the container. For a gas, we know that,

PV = nRT

V is volume

R is gas constant, R =  0.0821 atm-L/mol-K

So,

[tex]V=\dfrac{nRT}{P}\\\\V=\dfrac{3\ mol\times 0.0821\ L-atm/mol-K \times 300\ K}{1.25\ atm}\\\\V=59.112\ L[/tex]

So, the volume of the container is 59.112 L

Answer:

2.77 mol/kg

Explanation:

Molality is a sort of concentration that indicates the moles of solute in 1kg of solvent. In this case our solvent is water and, if we consider water's density as 1g/mL, we determine that the mass of solvent is 750 g.

We convert the mass to kg → 750 g . 1kg /1000g = 0.750 kg

Our solute is the NaOH → 83 g.

We convert the mass to moles → 83 g . 1mol /40g = 2.075 mol

Molality (mol/kg) = 2.075 mol / 0.75kg = 2.77 m

Answer:

+ small

Explanation:

The entropy is obtained from;

∆S= ∆H/T

Where;

∆S= entropy of the system

∆H= enthalpy if the system = +23.7 KJ

T= absolute temperature of the system = 390 K

∆S= 23.7 ×10^3/390 = 60.8 JK^-

There is a small positive change in entropy.

Answer: [tex]\Delta G^{0}[/tex] = 168.12 kJ

Explanation: Gibbs Free Energy, at any time, is defined as the enthalpy of the system minus product of temperature and entropy of the reaction, i.e.:

[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]

Enthalpy is defined as internal heat existent in the system. It is calculated as:

[tex]\Delta H^{0} = \Sigma H^{0}_{product} - \Sigma H^{0}_{reagent}[/tex]

Using Enthalpy Formation Table:

[tex]\Delta H^{0} = [3*(-299.9)+(-524.7)] - (-1277)[/tex]

[tex]\Delta H^{0} = 62,6 kJ[/tex]

Entropy is the degree of disorder in the system. It is found by:

[tex]\Delta S^{0} = \Sigma S^{0}_{products} - \Sigma S^{0}_{reagents}[/tex]

Calculating:

[tex]\Delta S^{0} = (-321.7) + 3(-10.8) - 0[/tex]

[tex]\Delta S^{0} = -354.1J[/tex]

And so, Gibbs Free energy will be:

[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]

[tex]\Delta G^{0} = 62600 - [298.(-354.1)][/tex]

[tex]\Delta G^{0} = 168121.8 J[/tex]

Rounding to the nearest kJ:

[tex]\Delta G^{0}[/tex] = 168.12 kJ

Answer:

acetic acid and phosphoric acid

Explanation:

After refluxing the reaction mixture ( synthesis of isoamyl acetate ) what is likely present in the solution is acetic acid and phosphoric acid, this due to the fact that if the reaction time between the reactants was less than the refluxing time which is 25 minutes,

there will be no reactant ( 3-methylbutanol )left in the reaction mixture

Answer:

The process will be spontaneous above 702 K.

Explanation:

Step 1: Given data

Step 2: Calculate the temperature range in which the process will be spontaneous

The reaction will be spontaneous when the standard Gibbs free energy (ΔG°) is negative. We can calculate ΔG° using the following expression.

ΔG° = ΔH° - T × ΔS°

When ΔG° < 0,

ΔH° - T × ΔS° < 0

ΔH° < T × ΔS°

T > ΔH°/ΔS°

T > (308,000 J/mol)/(439 J/mol.K)

T > 702 K

The process will be spontaneous above 702 K.

Answer:

[tex]M_{acid}=0.141M[/tex]

Explanation:

Hello,

In this case, the reaction between sulfuric acid and hydroxide is:

[tex]H_2SO_4+2NaOH\rightarrow Na_2SO_4+2H_2O[/tex]

We can notice a 1:2 molar ratio between the acid and the base respectively, therefore, at the equivalence point we have:

[tex]2*n_{acid}=n_{base}[/tex]

And in terms of volumes and concentrations:

[tex]2*M_{acid}V_{acid}=M_{base}V_{base}[/tex]

So we compute the molarity of sulfuric acid as shown below:

[tex]M_{acid}=\frac{M_{base}V_{base}}{2*V_{acid}} =\frac{0.100M*28.15mL}{2*10.0mL}\\ \\M_{acid}=0.141M[/tex]

Best regards.

Answer:

ΔHrxn = -635.14kJ/mol

Explanation:

We can make algebraic operations of reactions until obtain the desire reaction and, ΔH of the reaction must be operated in the same way to obtain the ΔH of the desire reaction (Hess's law). Using the reactions:

(1)Ca(s) + 2 H+(aq) → Ca2+(aq) + H2(g) ΔH = 1925.9 kJ/mol

(2) 2H2(g) + O2 g) → 2 H2O(l) ΔH = −571.68 kJ/mole

(3) CaO(s) + 2 H+(aq) → Ca2+(aq) + H2O(l) ΔH = 2275.2 kJ/mole

Reaction (1) - (3) produce:

Ca(s) + H2O(l) → H2(g) + CaO(s)

ΔH = 1925.9kJ/mol - 2275.2kJ/mol = -349.3kJ/mol

Now this reaction + 1/2(2):

Ca(s) + ½ O2(g) → CaO(s)

ΔH = -349.3kJ/mol + 1/2 (-571.68kJ/mol)

Explanation:

The whole process of titration involves finding the concentration of a solution (usually an acid or base) by adding (titrating) it to a solution(acid or base) with a known concentration.

The solution of unknown concentration (the analyte) is usually placed in an flask, while the solution of known concentration (titrant) is placed in a burette and slowly added to the flask.

Answer:

The temperature of the air at this given elevation will be 53.32425°C

Explanation:

We can calculate the final temperature through the combined gas law. Therefore we will need to know 1 ) The initial volume, 2 ) The initial temperature, 3 ) Initial Pressure, 4 ) Final Volume, 5 ) Final Pressure.

Initial Volume = 1.2 L ; Initial Temperature = 25°C = 298.15 K ; Initial pressure = 1.0 atm  ; Final Volume = 1.8 L ; Final pressure = 0.73 atm  

We have all the information we need. Now let us substitute into the following formula, and solve for the final temperature ( T[tex]_2[/tex] ),

P[tex]_1[/tex]V[tex]_1[/tex] / T[tex]_1[/tex] = P[tex]_2[/tex]V[tex]_2[/tex] / T[tex]_2[/tex],

T[tex]_2[/tex] = P[tex]_2[/tex]V[tex]_2[/tex]T[tex]_1[/tex] / P[tex]_1[/tex]V[tex]_1[/tex],

T[tex]_2[/tex] = 0.73 atm [tex]*[/tex] 1.8 L [tex]*[/tex] 298.15 K / 1 atm [tex]*[/tex] 1.2 L = ( 0.73 [tex]*[/tex] 1.8 [tex]*[/tex] 298.15 / 1 [tex]*[/tex] 1.2 ) K = 326.47425 K,

T[tex]_2[/tex] = 326.47425 K = 53.32425 C

Answer:

ΔG°′ = 1.737 KJ/mol

Explanation:

The reaction involves the transfer of two electrons in the form of hydride ions from reduced coenzyme Q, CoQH₂ to fumarae to form succinate and oxidized coenzyme Q, CoQ.

The overall equation of reaction is as follows:

fumarate²⁻ + CoQH₂ ↽⇀ succinate²⁻ + CoQ ;    ΔE∘′=−0.009 V

Using the equation  for standard free energy change; ΔG°′ = −nFΔE°′

where n = 2; F = 96.5 KJ.V⁻¹.mol⁻¹; ΔE°′ = 0.009 V

ΔG°′ = - 2 * 96.5 KJ.V⁻¹.mol⁻¹ * 0.009 V

ΔG°′ = 1.737 KJ/mol

Answer:

Explanation:

Given:

Mass of solute = 30 gram

Volume of water = 500 ml

Density = 1.15g/ml

Find:

(i)ppm

(ii) %w/v

(iii) %w/w

Computation:

Water in gram = 500 ml × 1.15 g/ml

Water in gram = 575 gram

In ppm

Concentration of MgSO4 = [30 / 575] × 10⁶

Concentration of MgSO4 = 0.0521 × 10⁶ ppm

in % w/v

Concentration of MgSO4 = [30 / 500] × 100

Concentration of MgSO4 = 6% w/v

in % w/w

Concentration of MgSO4 = [30 / 575] × 100

Concentration of MgSO4 = 5.21% w/w

Answer:

The median would be 6700

Explanation:

Arrange data values from lowest to highest value

The median is the data value in the middle of the set

.

Ordering a data set x1 ≤ x2 ≤ x3 ≤ ... ≤ xn from lowest to highest value, the median x˜ is the data point separating the upper half of the data values from the lower half.

If the size of the data set n is odd the median is the value at position p where

Formula for the median

p=n+12

x˜=xp

If n is even the median is the average of the values at positions p and p + 1 where

p=n2

x˜=xp+xp+12

If there are 2 data values in the middle the median is the mean of those 2 values.

Answer:

C

Explanation:

According to the mole ratio, using 2NH3 will give you 3H2. Which means in order to find the moles of H2 you would only need to divide 2 and multiply 3 to get the amount of moles of H2 produced.

Answer:

I think it's C

Explanation:

Please, tell me if I'm incorrect.

Answer:

Explanation:

lewis structure can be defined as a process of how the valence shell electrons of a molecule is being arranged, the pattern of it arrangement and the relationship between the bonding atoms and the lone pairs present in the molecule.

In order to draw the Lewis structure for Arsenate ion  [tex]\mathsf{AsO \ _4^{3-}}[/tex], first thing is to count the valence electrons in the molecule. Once we determine the valence electrons, then we distribute them around the central atom. The Arsenate ion structure is tetrahedral in nature with a bond angle of 109.5° and it is sp³ hybridized.