Answer:
55.768
Explanation:
The following information is given in this question:
Fe-54 = 5.845%
Fe-56 = 91.754%
Fe-58 = 2.119%
First, we convert from percentage abundance to decimal abundance
Fe-54 = 5.845% = 0.05845
Fe-56 = 91.754% = 0.91754
Fe-58 = 2.119% = 0.02119
To find the average atomic mass of iron (Fe), we multiply each isotopes' decimal abundance by its mass no and find the sum as follows:
Average atomic mass = (0.05845 × 54) + (0.91754 × 56) + (0.02119 × 58)
Average atomic mass = 3.1563 + 51.38224 + 1.22902
Average atomic mass = 55.768
An atom has mass number 23 and atomic number 11.
a) How many electrons are revolving around the nucleus?
b) How many electron shells are there in the atom?
A): The closest orbital to the nucleus, called the 1s orbital, can hold up to two electrons. This orbital is equivalent to the innermost electron shell of the Bohr model of the atom. It is called the 1s orbital because it is spherical around the nucleus. The 1s orbital is always filled before any other orbital.
career in chemistry list ten
Answer:
Analytical Chemist
Forensics
Toxicologist
Biochemist
Chemical Engineer
Laboratory Technician
Pharmacologist
Chemical Technician
Materials Scientist
Environmental Chemist
Which coefficient of O2 is needed to balance the equation C3H8 + O2 → 3CO2 + 4H2O?
A.
2
B.
3
C.
5
D.
6
The answer is C. 5
Hope I helped
prove thatp=dgh prove that P is equals to Dgh
Answer:
i hope it will help you
Explanation:
mark me as a brainlest answer
what is mean by vector
Answer:
A quantity having direction as well as magnitude is called vector.
what is mean by measurement
Answer:
Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. ... Extent, quality, or size as determined by measuring; dimension. A waist measurement of 32 inches.
Explanation:
The comparison o unknown quantity with known standard quantity is called measurement.
The compound KOH is ________. insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
Answer:
soluble because all compounds containing K are soluble
Explanation:
Most metal hydroxides are insoluble. However, alkali metal hydroxides (such as KOH and NaOH) are very soluble.
In the case of KOH, the K cation is attracted to the electronegative oxygen on water. The OH anion is capable of hydrogen bonding to the water. (Notice how OH⁻ is simply the deprotonated form of water.)
The compound KOH is soluble insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
What are alkalis?Alkalis are bases which are soluble in water. The basic alkalis are as follows:
KOHNaOHCa(OH)2Mg(OH)2 is insoluble in water.
In conclusion, KOH is a soluble base
Learn more about alkalis:
https://brainly.com/question/25317545
Josefina and Raul were comparing how sound moves through various mediums and how charge moves through conducting wires. They performed experiments to find out if the factors that determine the speed of sound are the same as those that determine the flow in a circuit. What did they find? Describe two things that they found. For each, explain how the speed of sound and flow of current are affected
They found that difference occurs in the speed of both sound and charges occur due to the difference in the type of medium.
Sound and charges needs specific medium for faster movement i.e. sound moves faster in solid as compared to liquid and gas whereas charges moves faster and easily in gold due to lower resistance which is followed by copper. Sound can move from solid, liquid and gases whereas charges move only in solid metal in which free electrons are present. The speed of sound and flow of current are affected due to difference in the arrangement of atoms in solid, liquid and gas.
https://brainly.com/question/24373020
What are differences between viruses and bacteria?
Answer:
viruses are computer program that replicate itself and distribute itself to another computer but bacteria is micro organism that contaminate our food and can make us sick
PLS HELP!! WILL MARK BRAINLIEST! 99 POINTS!
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
what's the atomic weight of salt ?
Answer:
58.44 g/mol
Explanation:
58.44 g/mol
What would you use to measure the height of a sample?
Question 2 options:
ruler
beaker
graduated cylinder
electronic balance
Answer:
please clear ur ques with image
it's unable to be understood
...
How does the chemistry of the ocean change in response to high levels of CO2 in the atmosphere?
What is occurring during the flat section of the graph below on the red arrow labeled boiling, between liquid and gas? gas (3.) OO liquid temperature solid time (minutes) O A. Heat is being absorbed, allowing particles of the liquid to overcome the atmospheric pressure. B. Heat is being absorbed, allowing particles of the liquid to overcome the vapor pressure. C. Heat is being released, allowing particles of liquid to overcome the pressure, and is why the temp does not increase. D. The temperature is no longer increasing even though heat is still being added because the heat is being absorbed to lower the melting point
Cuales son los tipos de yemas
What information does the specific heat capacity give about a substance?
A. How much energy is needed to raise its temperature
B. How much heat is released when it changes phases
C. How much energy is needed to overcome an activation energy
O
0
D. How much heat is stored in its chemical bonds
Specific heat capacity tells about how much energy is needed to raise its temperature.
What is specific heat capacity?
Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.
It is given by the formula ,
Q=mcΔT
Learn more about specific heat capacity,here:
https://brainly.com/question/29766819
#SPJ1
equation for the reaction btn nitric acid and metal X whose valence is 3
from the equation 2PbO + C = 2Pb + CO2, detemine which one is reactant is oxidised and which is reduced.
Answer:
Explanation:
C is oxidised because C up to C+4
PbO is reduced because PbO from Pb2+ down to Pb0
Answer:
lead (Pb) is reduced carbon is oxidized
If you started with 2 moles of Nitrogen and 3 moles of Hydrogen, then you
would not have any leftover reactants. Explain which material would be
limiting since no hydrogen or nitrogen were left over?
N2 + 3H2 -> 2NH3
Answer: 0.3 moles NH3
Explanation:
In the compound Ni2O3, nickel's oxidation number is_____
oxidation number is -2.
and oxygen's
Answer:
+3
Explanation:
The name of this compound would be nickel (III) oxide. Oxygen typically has a charge of -2. Given there are 3 oxygen atoms, that would equal a charge of -6. The nickel is the cation and must equal the charge of the anion, so must have a charge of +6. Since there are 2 nickel atoms, the charge on each must be +3.
what is electrolysis
Answer:
Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell
Isotopes are atoms that have the same mass number, but different numbers.
atomic. True or false
Answer: Im not sure but I think it is false.
Explanation:
Al wonders if adding salt to water will affect how long it takes the water to
freeze. Al thinks that salt water will freeze more quickly than fresh water.
He decides to check his hypothesis by conducting an experiment. Al takes
two ice trays and fills one with distilled water and the other with distilled
water that has two tablespoons of salt added. He makes sure he puts
exactly the same amount of water in each ice tray. Al takes the trays and
puts them side by side in the freezer. Al checks the ice trays every 10
minutes to see if the water in each tray has begun to freeze. Al finds that
after 20 minutes the water in the ice tray without the salt has started to
form ice, while the ice tray with the salt water is still completely liquid.
Ku
The hypothesis is that salt water freezes faster than fresh water.
The dependent variable is time taken for ice to appear.
The independent variable is presence or absence of salt
The constants are the amount of water in each tray, freezing conditions and length of time of exposure to freezing condition.
The control group is the tray to which salt was not added
The experimental group is the tray to which salt was added
The presence of solutes in a solution causes the freezing point depression.
A solution is made up of a solute and a solvent. In the presence of a solute, the freezing point of a pure solvent is decreased. This is because freezing point is a colligative property.
Colligative properties depend on the amount of solute present.
Hence, the pure water freezes faster (ice begin to appear earlier) than the salt water.
The hypothesis put forward in this experiment was found to be invalid by the experiment.
For more about colligative properties, see
https://brainly.com/question/10323760
with balanced chemical equations, show the different stages of fermentation
Answer:
formula for fermentation is: C6H12O6 → 2 C2H5OH + 2 CO.
If the magnet loses its superconducting properties, all of the liquid helium could suddenly turn to a gas. If an MRI machine contains 1950 L liquid He with a density of 0.125g/mL, how many liters of He gas would be formed at 25°C and 1 atm? Use the ideal gas law. Round your final answer to two significant figures. Show your work. (4 points)
Answer:
Determine the volume of helium gas
Answer:
About 1,495 Liters of Helium.
Explanation:
To calculate the volume of helium gas formed when the magnet loses its superconducting properties, we can use the ideal gas law:
PV = nRT
Where:
P = Pressure (in atm)
V = Volume (in liters)
n = Number of moles of helium gas
R = Ideal gas constant (0.0821 L.atm/(mol.K))
T = Temperature (in Kelvin)
First, we need to find the number of moles of helium gas:
Given volume of liquid helium (V_liquid) = 1950 L
Density of liquid helium (ρ) = 0.125 g/mL = 0.125 g/cm³
To convert density from g/cm³ to g/L, we multiply by 1000:
Density of liquid helium (ρ) = 0.125 g/cm³ * 1000 cm³/L = 125 g/L
Mass of liquid helium (m) = Volume * Density = 1950 L * 125 g/L = 243,750 g
Next, we need to convert the mass of liquid helium to moles using the molar mass of helium:
Molar mass of helium (M) = 4.0026 g/mol
Number of moles (n) = Mass / Molar mass = 243,750 g / 4.0026 g/mol ≈ 60,907 mol
Now, we have the number of moles of helium gas (n), and we can calculate the volume of helium gas (V_gas) at 25°C (298.15 K) and 1 atm:
P = 1 atm
T = 25°C = 298.15 K
V_gas = nRT / P
V_gas = (60,907 mol) * (0.0821 L.atm/(mol.K)) * (298.15 K) / (1 atm)
V_gas ≈ 1,495 L
Therefore, approximately 1,495 liters of helium gas would be formed at 25°C and 1 atm when the magnet loses its superconducting properties.
15. The starting diol for this molecule is
O A. ethanol.
O B. propan-1,3-dioic acid.
O C. propan-1,3-diol.
O D. ethan-1,2-diol.
Hope my answer is helpful to you ☺️
Which would increase the reaction rate?
O A. Decreasing the reactant concentrations
B. Removing heat from the system
O C. Adding a catalyst
O D. Lowering the value of k
Answer:
C
Explanation:
C. Adding a catalyst would increase the reaction rate.
What is a catalyst?A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.
A catalyst enhances the probability of successful collisions between reactant molecules, which raises the pace of the reaction by offering an additional avenue for the reaction to occur.
As there would be fewer reactant molecules accessible to react with one another, decreasing reactant concentrations would result in a slower pace of reaction.
Due to the fact that chemical reactions often require energy to take place, eliminating heat from the system would also slow down the reaction rate. A lower value for k would result in a lower rate constant, which would lower the response rate.
Learn more about catalyst at:
https://brainly.com/question/24430084
#SPJ7
Elements in the same period Question 7 options: A) form bonds with the same type of elements. B) have the same number of protons. C) have the same number of valence electrons. D) have the same principal quantum number.
D is the answer .. I have send u pic also
Please help :)
A chocolate chip cookie recipe calls for 0.050 moles of baking soda (NaHCO3). How many grams should the chef mass out?
According to the mole concept, 4.2 g of baking soda should be weighed out.
What is mole concept?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Baking soda has molar mass of 84 g /mole, thus mass is calculated using number of moles formula which is mass= molar mass×number of moles, which is mass=84×0.050=4.2 g.
Thus,4.2 g of baking soda should be weighed out by chef.
Learn more about mole concept,here:
https://brainly.com/question/12805690
#SPJ2
Which state of matter has particles that vibrate and can change place but remain touching in a random arrangement.
A. Liquid
B. None of these
C. Plasma
D. Gas
The particles in the solid are touching with very little space between them. The particles in a liquid usually are still touching but there are some spaces between them. The gas particles have big distances between them.
...
Liquids Solids and Gases:
NON OF THESE
