Answer:
Efectivamente, el mero crecimiento económico no es suficiente para terminar con la pobreza y preservar el medio ambiente, sino que dicho crecimiento debe ir acompañado de un desarrollo estructural que contemple el acceso igualitario a los distintos servicios por parte de la sociedad, así como también el establecimiento de controles sanitarios y medioambientales que preserven el bienestar de los individuos en el marco del desarrollo de las actividades económicas.
Aesha works for a moderately priced running shoe manufacturer and while their products are lower in cost, there is a high degree of consumer pressure to create the best quality running shoes possible and to constantly innovate with new designs. Which aspect of Porter’s Diamond does this demonstrate
Answer:
Demand conditions
Explanation:
Demand conditions means the size and the nature of the customer base for the products that could result in innovation and the improvement related to the product.
Since in the given situation it is mentioned that their products contains less cost but they develop the best quality shoes also they innovate the products from time to time so this represent the demand conditions
Stabilisation is an important factor of
Answer:
Stabilization is accomplished by increasing the shear strength and the overall bearing capacity of a soil. Once stabilized, a solid monolith is formed that decreases the permeability, which in turn reduces the shrink/swell potential and harmful effects of freeze/thaw cycles.17
How have people been lately good? bad? something else?
Answer:
People have been very bad lately
A warranty in which the seller warrants that he or she has valid title to the goods he or she is selling and that the transfer of title is rightful is known as a warranty ________. of good title of no interference of no security interests against infringements
Answer:
of good title.
Explanation:
A good can be defined as any physical object or material that typically satisfy and meets the demands, needs or wants of customers. Some examples of a good are mobile phones, television, microphone, microwave oven, bread, pencil, freezer, beverages, soft drinks, etc.
A warranty can be defined as a written promise or guarantee made by a manufacturer, lessor or seller about the identity or quality of goods and services or a property to a purchaser, promising him or her to repair or replace it if necessary within a specified time frame.
Hence, a warranty in which the seller of a good or service warrants that he or she has valid title to the goods he or she is selling and that the transfer of title is rightful is known as a warranty of good title.
A legal title can be defined as the actual (absolute) ownership of a property that is recognized and enforceable in a court of competent jurisdiction.
IS 100 POINTS will mark brainliest
Keep track of your income and expenses for one month. List all your assets and liabilities (debts owed) in a spreadsheet. Based on these documents, develop a monthly budget and a net worth statement.
When units produced exceed units sold, net income will generally be ______ costing. Multiple choice question. the same under both absorption costing and variable higher under variable costing than under absorption higher under absorption costing than under variable
Answer:
higher under absorption costing than under variable costing.
Explanation:
Costing is the measurement of the cost of production of goods and services by assessing the fixed costs and variable costs associated with each step of production.
Manufacturing costs can be defined as the overall costs associated with the acquisition of resources such as materials and the cost of converting these raw materials into finished goods. Manufacturing costs include direct labor costs, direct materials cost and manufacturing overhead costs.
In Business management, when the total units of goods produced by a business firm (manufacturer) exceed the total units of goods sold, net income will generally be higher under absorption costing than under variable costing.
A door-to-door salesperson knocks on Mary's door and convinces her to purchase the Wonder Vacuum for $500. Soon after the salesperson leaves, Mary begins to have second thoughts about the transaction. Which statement about the situation is correct
Keepsake Collectibles focuses its marketing efforts on high-income buyers of unique collectible items. The firm realizes that the number of buyers in this segment of the collectible market is small. However, they are confident that this approach will be profitable since these buyers will pay premium prices for their unique products and superior customer service. Keepsake's approach is an example of:
Answer:
niche marketing.
Explanation:
From the question we are informed about Keepsake Collectibles which focuses its marketing efforts on high-income buyers of unique collectible items. The firm realizes that the number of buyers in this segment of the collectible market is small. However, they are confident that this approach will be profitable since these buyers will pay premium prices for their unique products and superior customer service. Keepsake's approach is an example of niche marketing.
The niche market can be regarded as subset of market whereby specific product is the target or been focused.
The market niche gives the description about product features and focus on satisfying particular market needs, it also focus on satisfying price range as well as production quality and also the demographics required for target. It can be regarded as small market segment
Bryan works as a salesman for Jumbo Corp. Last year his sales target was $3 million. This year in an aggressive bid for growth, the company increased the sales quota for all its sales people to $5 million, although the market for Jumbo Corps products had slowed. In order to meet his target, Bryan bribed an official of a potential customer. The roots of his unethical behavior can be traced to ___ cultural differences in countries. varying ethical standards in different nations. unrealistic performance goals. strong personal ethics among employees.
Answer:
unrealistic performance goals.
Explanation:
Unethical action is defined as one that is carried out by an individual that is seen as wrong or outside of expected behaviour in a particular environment.
In the given scenario Bryan bribed an official of a potential customer.
However his action is as a result of the company increasing the sales quota from $3 million for all its sales people to $5 million.
This is despite the market for Jumbo Corps products having slowed.
The target was unrealistic driving Bryan to take the action he did
Manufacturing cycle time is best defined as the: length of the work shift, expressed in minutes per day. time it takes a unit to move from one workstation to the next. time between the start of one unit and the start of the next unit. sum of all the task times to make one unit of a product. time from raw materials receipt to finished product exit.
Answer:
time from raw materials receipt to finished product exit.
Explanation:
Manufacturing cycle time is best defined as the "time from raw materials receipt to finished product exit."
To explain better, manufacturing cycle time is the overall time of process that covers the total duration it takes the final production of commodities to be made. That is beginning from the inception stage which is usually raw materials through its conversion stage and eventually into finished goods.
why personnel management is important to an office?Explain in details.
Answer: See explanation
Explanation:
Personnel management can be defined as the the effective management of the employees in an organisation. The importance of personnel management to an office include:
• Personnel management helps in bringing the gap that exist between the performance of the employees and the objectives of the organisation.
• An efficient personnel management is important as it gives a company and edge over its rivals.
• A good and effective personnel management helps in the creation and the maintenance of a working environment that's harmonious.
What is price index number?
Answer:
Price index number can be defined as a measure of how the price of goods and services change over a specific period of time.
Explanation:
Price can be defined as the amount of money that is required to be paid by a buyer (customer) to a seller (producer) in order to acquire goods and services. Thus, it refers to the amount of money a customer or consumer buying goods and services are willing to pay for the goods and services being offered.
Generally, the price a consumer (buyer) would pay for goods and services are primarily being set by the seller or service provider.
In sales and marketing, pricing of products is considered to be an essential element of a business firm's marketing mix because place, promotion and product largely depends on it.
Price index number can be defined as a measure of how the price of goods and services change over a specific period of time.
Hence, it's a statistical value (number) that is typically used for expressing the price change of goods and services as a percentage of prices in a base year.
On a related note, the consumer price index (CPI) is a measure used to analyze and examine the weighted average or aggregate of prices of a basket of goods and services paid for by consumers such as medical, food, and transportation.
In measuring GDP as the sum of all incomes earned in production, we should include: purchases of used goods. purchases of used goods. American purchases of foreign output. American purchases of foreign output. wages and salaries. wages and salaries.
Answer:
wages and salaries.
Explanation:
GDP is an acronym for Gross Domestic Products (GDP) and it can be defined as a measure of the total market value of all finished goods and services made within a country during a specific period.
Simply stated, Gross Domestic Products (GDP) is a measure of the production levels of any nation.
Basically, the four (4) major expenditure categories of GDP are;
I. Consumption (C).
II. Investment (I).
III. Government purchases (G).
IV. Net exports (N).
Additionally, it is a measure of the total income of all individuals in an economy and the total expenses incurred on the economy's output of goods and services in a particular country.
In measuring GDP as the sum of all incomes earned in production, we should include wages and salaries of the people working in a particular country.
Small businesses that are just getting off the ground often have problems with the difference between cash coming into the business and cash going out of the business. For example, if the company allows far too lenient credit sales terms, customers do not pay on time, which could cause cash to come in too slowly. That's why the __________ is a key financial statement of any business.
Answer: cash flow
Explanation:
Cash flow refers to the net amount of cash and cash equivalents which is being transferred into and out of a business.
The cash flow is an important financial statement of any business. It's vital for all businesses to keep a watch on their cash flows. This is vital in knowing if the business is making a profit or loss.
Swisher, Incorporated reports the following annual cost data for its single product: This product is normally sold for $48 per unit. If Swisher increases its production to 50,000 units, while sales remain at the current 30,000 unit level, by how much would the company's income increase or decrease under absorption costing
Answer:
$60,000 increase.
Explanation:
Calculation to determine by how much would the company's gross margin increase or decrease under absorption costing
First step is to calculate FOH per unit at 30,000 unit level
FOH per unit=$150,000/30,000 units
FOH per unit = $5 FOH per unit
Second step is to calculate FOH per unit at 50,000 unit level
FOH per unit=$150,000/50,000 units
FOH per unit= $3 FOH per unit
Now let determine by how much would the company's gross margin increase or decrease under
Gross margin=($5 - $3)*30,000
Gross margin = $2 x 30,000
Gross margin = $60,000 increase
Therefore by how much would the company's gross margin INCREASE under absorption costing is $60,000
Plankton Company uses LIFO for all of its inventories. During its second quarter of 20X1, Plankton experienced a LIFO liquidation. Plankton fully expects to replace the liquidated inventory in the early part of the third quarter. How should Plankton report the inventory temporarily liquidated on its income statement for the second quarter
Answer: Cost of goods sold for the second quarter should include the expected replacement cost of the goods temporarily liquidated
Explanation:
LIFO and FIFO are the methods that are used for inventory management. In order for Plankton to report the inventory temporarily liquidated on its income statement for the second quarter, the cost of goods that is sold for the second quarter should consist of the expected replacement cost of the goods temporarily liquidated.
Only one situation exists in which I would be ready to invest in penny stocks: if the money is extra and represents a very small percentage of my entire portfolio, and I am willing to lose it completely. This is because penny stocks are shares in young firms that are still in the early stages of development. The rate of return on these stocks can be enormous, but they can also go bankrupt, causing you to lose all of your money just as quickly. As a result, they're extremely hazardous investments.
Answer:
Investment of excess funds is a good option to multiply the money. One can invest their savings which are not currently in use. The risk appetite of a person is assessed before it decides to invest money.
Explanation:
A person should never invest its full money. It should keep some money for emergency needs. Also it is needed to consider risk appetite of a person and his willingness to take risk in order to construct his portfolio. Returns are dependent on risk levels. More riskier investments will give more returns. Stocks are considered as riskier investments because a company may go bankrupt and you can loose all your money or on the other case there can be flourishing returns waiting for you.
Exercise A. Answer the following questions. 1. What are the basic points to be considered while running the occupation? Give a short description for each of them.
Answer:
basic pints to be conccedred wile running is u should drink water more and f##k more
Explanation:
Labor and management at Leo Trucking cannot seem to agree upon a contract for the truck drivers. As each side contends that they are bargaining fairly, no agreement seems to be possible. The drivers are threatening to go on strike, and management knows that such a strike would prove to be costly. None of the parties involved in the dispute wants to reach a win-win agreement. They are each highly focused on their demands, which they would like to achieve, otherwise known as their ________ points. target tolerance focal distribution resistance
Answer:
resistance points
Explanation:
In simple words, The resistance level can be understood as the lowest point where a mediated settlement will be accepted. For a vendor, this implies the smallest number (minimum) or end result they are willing to take, whereas for a purchaser, it implies the highest number (upper limit) or bottom boundary they are willing to spend.
Thus, from the above we can conclude that the correct answer is resistance point.
Working capital is ______. Multiple select question. treated as a cash inflow when released at the end of a project. not discounted when computing the net present value of an investment treated as a cash outflow when required at the beginning of a project. not treated as a cash flow in an investment project.
Answer:
treated as a cash inflow when released at the end of a project.
Explanation:
A statement of cash flows is also known as cash flow statement and it is a financial statement which is used to illustrate how changes in income and various account of the balance sheet affect cash and cash equivalents.
The statement of cash flows is also used by financial experts or accountants to breakdown the cash-flow analysis into;
1. Cash-flow from operating activities
2. Cash-flow from investing activities.
3. Cash-flow from financing activities.
Basically, a cash inflow can be defined as an amount of money that flows into a business.
In Financial accounting, working capital is calculated by subtracting the value of current liabilities from current assets.
Working capital often increases when a new project is taking up, is treated as a cash inflow when released at the end of a project and it's typically treated as a cash-outflow if it's required at the start (beginning) of a project.
A company has budgeted direct materials purchases of $290000 in July and $460000 in August. Past experience indicates that the company pays for 70% of its purchases in the month of purchase and the remaining 30% in the next month. During August, the following items were budgeted: Wages Expense $80000 Purchase of office equipment 65000 Selling and Administrative Expenses 42000 Depreciation Expense 29000 The budgeted cash disbursements for August are
Answer:
$596,000
Explanation:
Calculation to determine what The budgeted cash disbursements for August are:
Wages Expense $80,000
Add Purchase of office equipment $65,000
Add Selling and Administrative Expenses $42,000
Add August budgeted direct materials $322,000
($460,000*.70)
Add July budgeted direct materials $87,000
($290,000*.30)
Budgeted cash disbursements $596,000
($80,000+$65,000+$42,000+$322,000+$87,000)
Therefore The budgeted cash disbursements for August are $596,000
At a price of $2,000 per unit, the demand for Rancho 60 mountain bikes from Peyton Bike's Inc. is 300 units, which is the number of bikes the company manufactures every year. This is Peyton Bike's maximum output. If the marketing managers at Peyton Bike's Inc. decide to sell each bike at a price lower than $2,000 per unit, _____.
The statement "bikes shortage should be developed" is correct.
The following information should be considered:
In the case when the firm wants to sell the product at a lower price so there should be a product shortage.The demand and supply should not achieve at equilibrium.There is no inelastic demand that should be developed.The no of bikes generated should not be increased.Therefore we can conclude that The statement "bikes shortage should be developed" is correct.
Learn more about the product shortage here: brainly.com/question/12596577
government revenue will increase if taxes are leved on --------- -perfectly elastic demand -unitary elastic demand -perfectly inelastic demand -fairly elastic demand
Answer:
If the price for an inelastic good is lowered, the demand for that good does not increase, resulting in less overall revenue due to the lower price and no change in demand
Answer:
to hard ooooooo help me bro
Explain the importance of leisure activities.
Answer:
leisure activities improve the productivity of people
Explanation:
if you feel stressed and then go to a water park, you will get less stressed right?
if a transaction says started a business with cash 80000 Rands in bank is it a contra entry?
Answer:
yes
Explanation:
because, Contra entries are those entries in which same account can be debited and credited in contrary situation. For example we debit Bank account when depositing cash.At the same time we credit bank account when withdrawing money from bank.
Identify the true statements about materials requirements planning. (Check all that apply.) Multiple select question. It is considered a push system. It is used widely, especially in manufacturing. It is similar to kanban scheduling. It uses a time-phased schedule that is based on lead time. It solely considers the number of actual orders for the planning of material requirements.
Material requirements planning is simply used for the management of manufacturing processes.
The main aim of the materials requirement planning is that it helps in keeping production activities on track. Also, there's better inventory control and an improvement in scheduling.
Based on the options given, the true statements about materials requirements planning include:
• It is used widely, especially in manufacturing.
• It is considered a push system.
• It uses a time-phased schedule that is based on lead time.
Read related link on:
https://brainly.com/question/12678676
A client has a third-degree burn on the leg. The wound is being treated by the open method. After about 4 days, a hard crust has formed around the leg and is impairing the circulation to the leg. What procedure would be done to relieve pressure on the affected area?
A. escharotomy
B. debridement
C. allograft
D. silvadene application
your answer is third hope it's helpful to you
Allograft procedure would be done to relieve pressure on the affected area.
What is Allograft?Allograft refers to the transplant of an organ or tissue from one person of the same species to another with a different genotype. For instance, an allograft is a transplant from one individual to another who is not an identical twin. Many human transplants, including those involving cadaveric, live related, and living unrelated donors, use allografts. also referred to as a homograft or an allogeneic graft.
Allografts can be used in a variety of conditions with varied degrees of severity. For instance, bone allograft transplants can be utilized for more cosmetic purposes in dentistry or plastic surgery, as well as to repair limbs in orthopedics.
Allograft transplants can be employed both during the operation and directly for the treatment of patients. A type of bone putty created from donated bone or tissue material is called a demineralized bone matrix. Musculoskeletal allograft transplants are the most popular kind of allograft transplants.
This relates to one of the primary justifications for the use of allograft transplants: synthetic materials can have characteristics that differ from those of biologically human tissue and may not be appropriate for the intended application. In addition, tissue from an allograft transplant usually fuses with the recipient's own tissue over time, becoming an indistinguishable component of the recipient's body. If one's own tissue cannot be used in sufficient quantities, allograft transplants may be employed.
Tissues can be prepared for allograft transplantation using a variety of techniques. To get rid of as many cellular components as feasible, the tissue is treated with antibiotics, and detergents during aseptic processing.
It is also possible to chemically sterilize allograft tissue using the sterilization process. Gamma irradiation, a type of electromagnetic radiation that purges the tissue of microorganisms, is frequently combined with this. However, viruses might not be eliminated by gamma radiation.
Hence, correct option is C.
To learn more about allograft, click here
https://brainly.com/question/453869?
#SPJ2
Find out the municipal taxes you are subjected to. Calculate your average annual tax payments to your municipality.
(I'm not sure what this question for my online financial class is asking, can someone help?)
Answer:
I conducted an online research on the state of Virginia. The state of Virginia has 95 counties, 39 independent cities, and 190 incorporated towns. Only elected governing bodies can impose local taxes in this state of Virginia. A bulk of the local tax money comes from property taxes.
The following is the list of municipal taxes a consumer in all counties and cities of the state of Virginia is subjected to:
Items Tax Percentage Districts
Retail sales tax 0.7%
Occupancy tax 2.1% only for the Northern Virginia Planning District
Fee on grantors of real estate $0.15 to $100 of the value of property sold only for the Northern Virginia Planning District
Wholesale distributors of motor fuel 2.1% Hampton Roads Planning District
Restaurant meal 1%
Communication taxes 1.05%
Motor vehicle rental tax 4%
Explanation:
I conducted an online research on the state of Virginia. The state of Virginia has 95 counties, 39 independent cities, and 190 incorporated towns. Only elected governing bodies can impose local taxes in this state of Virginia. A bulk of the local tax money comes from property taxes.
The following is the list of municipal taxes a consumer in all counties and cities of the state of Virginia is subjected to:
Items Tax Percentage Districts
Retail sales tax 0.7%
Occupancy tax 2.1% only for the Northern Virginia Planning District
Fee on grantors of real estate $0.15 to $100 of the value of property sold only for the Northern Virginia Planning District
Wholesale distributors of motor fuel 2.1% Hampton Roads Planning District
Restaurant meal 1%
Communication taxes 1.05%
Motor vehicle rental tax 4%
10. Publishing representatives who call on college professors to inform them of their company's new publications have a great deal of freedom in their jobs. They have only a general sales pitch, which they tailor as needed. Based on this information, we can say that the job of these publishing representatives ________.
Answer:
Scores low on degree of formalization
Explanation:
Degree of formalization of a process is the level to which the process is free of the personal input of the individual executing the process.
It implies that in high degree of formalization process execution is set and the same steps are followed by all participants.
In the given instance Publishing representatives have a great deal of freedom in their jobs.
They tailor their sales pitch as they see fit.
This shows a low degree of formalization in the sales process
what is Photosynthesis?
Freé points -,-
Answer:
photosynthesis is a process by which green plants prepare their own food with the help of sun light and chlorophyll.
Answer:
the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.
