Electricity is distributed from electrical substations to neighborhoods at 13000 V. This is a 60 Hz oscillating (AC) voltage. Neighborhood transformers, seen on utility poles, step this voltage down to the 120 V that is delivered to your house.

Required:
a. How many turns does the primary coil on the transformer have if the secondary coil has 130 turns?
b. No energy is lost in an ideal transformer, so the output power Pout from the secondary coil equals the input power Pin to the primary coil. Suppose a neighborhood transformer delivers 280 A at 120 V. What is the current in the 1.3×10^4 V line from the substation?

Answers

Answer 1

Answer:

a)  N₁ = 14083 turns,  b)   I₁ = 2.58 A

Explanation:

The relationship that describes the relationship between the primary and secondary of the transformer is

         [tex]\frac{V_2}{N_2} = \frac{V_1}{N_1}[/tex]

a) They indicate that the secondary has N2 = 130 turns, the turns of the primary are

         N₁ = [tex]N_2 \frac{V_1}{V_2}[/tex]

         N₁ = [tex]130 \ \frac{13000}{120}[/tex]

         N₁ = 14083 turns

b) since there are no losses, the power of the neighboring transformer is

          P = V I

          P = 120 280

          P = 33600 W

this is the same power of the substation

          P = V₁  I₁

          I₁ = P / V₁

          I₁ = 33600/13000

          I₁ = 2.58 A


Related Questions

You're carrying a 3.0-m-long, 24 kg pole to a construction site when you decide to stop for a rest. You place one end of the pole on a fence post and hold the other end of the pole 35 cm from its tip. How much force must you exert to keep the pole motionless in a horizontal position?

Answers

Answer:

[tex]F=133N[/tex]

Explanation:

From the question we are told that:

Length [tex]l=3.0m[/tex]

Mass [tex]m=24kg[/tex]

Distance from Tip [tex]d=35cm[/tex]

Generally, the equation for Torque Balance is mathematically given by

[tex]mg(l/2)=F(l-d)[/tex]

[tex]2*9.81(3/2)=F(3-35*10^-2)[/tex]

Therefore

[tex]F=133N[/tex]

Mass A, 2.0 kg, is moving with an initial velocity of 15 m/s in the x-direction, and it collides with mass M, 4.0 kg, initially moving at 7.0 m/s in the x-direction. After the collision, the two objects stick together and move as one. What is the change in kinetic energy of the system as a result of the collision, in joules

Answers

Answer:

the change in the kinetic energy of the system is -42.47 J

Explanation:

Given;

mass A, Ma = 2 kg

initial velocity of mass A, Ua = 15 m/s

Mass M, Mm = 4 kg

initial velocity of mass M, Um = 7 m/s

Let the common velocity of the two masses after collision = V

Apply the principle of conservation of linear momentum, to determine the final velocity of the two masses;

[tex]M_aU_a + M_mU_m = V(M_a + M_m)\\\\(2\times 15 )+ (4\times 7) = V(2+4)\\\\58 = 6V\\\\V = \frac{58}{6} = 9.67 \ m/s[/tex]

The initial kinetic of the two masses;

[tex]K.E_i = \frac{1}{2} M_aU_a^2 \ + \ \frac{1}{2} M_mU_m^2\\\\K.E_i = (0.5 \times 2\times 15^2) \ + \ (0.5 \times 4\times 7^2)\\\\K.E_i = 323 \ J[/tex]

The final kinetic energy of the two masses;

[tex]K.E_f = \frac{1}{2} M_aV^2 \ + \ \frac{1}{2} M_mV^2\\\\K.E_f = \frac{1}{2} V^2(M_a + M_m)\\\\K.E_f = \frac{1}{2} \times 9.67^2(2+ 4)\\\\K.E_f = 280.53 \ J[/tex]

The change in kinetic energy is calculated as;

[tex]\Delta K.E = K.E_f \ - \ K.E_i\\\\\Delta K.E = 280.53 \ J \ - \ 323 \ J\\\\\Delta K.E = -42.47 \ J[/tex]

Therefore, the change in the kinetic energy of the system is -42.47 J

If a bus travels 50 km in 10 hours, how fast was the
bus travelling?

Answers

Answer:

5 kilometers per hour

Explanation:

Speed = distance / time

Distance: 50km

Time: 10 hours

Speed = 50/10 = 5kph

Answer:

5kmph

Explanation:

if the bus traveled 50 km in 10 hours, we have to divide 50 by 10 to see how fast it traveled per hour.

50/10 = 5

therefore, the bus was traveling 5 km per hour

hope this helps :)

 A car accelerates from 0 m/s to 25 m/s in 5 seconds. What is the average acceleration of the car.​

Answers

Answer:

5 m/s I hope it will help you

Explanation:

mark me as a brainlist answer

Imagine a spaceship traveling at a constant speed through outer space. The length of the ship, as measured by a passenger aboard the ship, is 28.2 m. An observer on Earth, however, sees the ship as contracted by 16.1 cm along the direction of motion. What is the speed of the spaceship with respect to the Earth

Answers

[tex]3.20×10^7\:\text{m/s}[/tex]

Explanation:

Let

[tex]L = 28.2\:\text{m}[/tex]

[tex]L' = 28.2\:\text{m} - 0.161\:\text{m} = 28.039\:\text{m}[/tex]

The Lorentz length contraction formula is given by

[tex]L' = L\sqrt {1 - \left(\dfrac{v^2}{c^2}\right)}[/tex]

where L is the length measured by the moving observer and L' is the length measured by the stationary Earth-based observer. We can rewrite the above equation as

[tex]\sqrt {1 - \left(\dfrac{v^2}{c^2}\right)} = \dfrac{L'}{L}[/tex]

Taking the square of the equation, we get

[tex]1 - \left(\dfrac{v^2}{c^2}\right) = \left(\dfrac{L'}{L}\right)^2[/tex]

or

[tex]1 - \left(\dfrac{L'}{L}\right)^2 = \left(\dfrac{v}{c}\right)^2[/tex]

Solving for v, we get

[tex]v = c\sqrt{1 - \left(\dfrac{L'}{L}\right)^2}[/tex]

[tex]\:\:\:\:=(3×10^8\:\text{m/s})\sqrt{1 - \left(\dfrac{28.039\:\text{m}}{28.2\:\text{m}}\right)^2}[/tex]

[tex]\:\:\:\:=3.20×10^7\:\text{m/s} = 0.107c[/tex]

1 Poin Question 4 A 85-kg man stands in an elevator that has a downward acceleration of 2 m/s2. The force exerted by him on the floor is about: (Assume g = 9.8 m/s2) А ON B 663 N C) 833 N D) 1003 N​

Answers

Answer:

D) 1003 N​

Explanation:

Given the following data;

Mass of man = 85 kg

Acceleration of elevator = 2 m/s²

Acceleration due to gravity, g = 9.8 m/s²

To find the force exerted by the man on the floor;

Force = mg + ma

Phân biệt các đặc điểm khác nhau giữa chất rắn, chất lỏng

Answers

Answer:

şen çal kapimi turkish drama

Two identical loudspeakers 2.30 m apart are emitting sound waves into a room where the speed of sound is 340 m/s. Abby is standing 4.50 m in front of one of the speakers, perpendicular to the line joining the speakers, and hears a maximum in the intensity of the sound.

Required:
What is the lowest possible frequency of sound for which this is possible?

Answers

Answer:

Abby is standing (4.5^2 + 2.3^2)^1/2   from the far speaker

D2 = 5.05 m from the far speaker

The difference in distances from the speakers is

5.05 - 4.5 = .55 m     (Let y be wavelength, lambda)

n y = 4.5

(n + 1) y = 5.05 for the speakers to be in phase at smallest wavelength

y = .55 m          subtracting equations

f = v / y = 340 / .55 = 618 / sec     should be the smallest frequency

A metal blade of length L = 300 cm spins at a constant rate of 17 rad/s about an axis that is perpendicular to the blade and through its center. A uniform magnetic field B = 4.0 mT is perpendicular to the plane of rotation. What is the magnitude of the potential difference (in V) between the center of the blade and either of its ends?

Answers

We are being given that:

The length of a metal blade = 300 cmThe angular velocity at which the metal blade is rotating about its axis is ω = 17 rad/sThe magnetic field (B) = 4.0 mT

A pictorial view showing the diagrammatic representation of the information given in the question is being attached in the image below.

From the attached image below, the potential difference across the conducting element of the length (dx) moving with the velocity (v) appears to be perpendicular to the magnetic field (B).

The magnitude of the potential difference induced between the center of the blade in relation to either of its ends can be determined by using the derived formula from Faraday's law of induction which can be expressed as:

[tex]\mathsf{E = B\times l\times v}[/tex]

where;

B = magnetic fieldl = lengthv = relative speed

From the diagram, Let consider the length of the conducting element (dx) at a distance of length (x) from the center O.

Then, the velocity (v) = ωx

The potential difference across it can now be expressed as:

[tex]\mathsf{dE = B*(dx)*(\omega x)}[/tex]

For us to determine the potential difference, we need to carry out the integral form from center point O to L/2.

[tex]\mathsf{E = \int ^{L/2}_{0}* B (\omega x ) *(dx)}[/tex]

[tex]\mathsf{E = B (\omega ) \times \Big[ \dfrac{x^2}{2}\Big]^{L/2}_{0}}[/tex]

[tex]\mathsf{E = B (\omega ) * \Big[ \dfrac{L^2}{8}\Big]}[/tex]

Recall that,

magnetic field (B) = 4 mT = 4 × 10⁻³  TLength L = 300 cm = 3mangular velocity (ω) = 17 rad/s

[tex]\mathsf{E = (4\times 10^{-3}) * (17) \Big[ \dfrac{(1.5)^2}{8}\Big]}[/tex]

[tex]\mathsf{E = 19.13 mV}[/tex]

Thus, we can now conclude that the magnitude of the potential difference as a result of the rotation caused by the metal blade from the center to either of its ends is 19.13 mV.

Learn more about Faraday's law of induction here:

https://brainly.com/question/13369951?referrer=searchResults

Air is compressed polytropically from 150 kPa, 5 meter cube to 800 kPa. The polytropic exponent for the process is 1.28. Determine the work per unit mass of air required for the process in kilojoules
a) 1184
b) -1184
c) 678
d) -678

Answers

Answer:

wegkwe fhkrbhefdb

Explanation:B

As a skydiver accelerates downward, what force increases? A. Gravity B. Thrust C. Air resistance D. Centripetal

Answers

Answer:

(A) Gravity is you're answer.

Explanation:

When an object or human is falling at an increased rate, The force of gravity is taking place.

A very long, straight solenoid with a diameter of 3.00 cm is wound with 40 turns of wire per centimeter, and the windings carry a current of 0.235 A. A second coil having N turns and a larger diameter is slipped over the solenoid so that the two are coaxial. The current in the solenoid is ramped down to zero over a period of 0.40 s.

Required:
a. What average emf is induced in the second coil if it has a diameter of 3.5 cm and N = 7?
b. What is the induced emf if the diameter is 7.0 cm and N = 10?

Answers

Answer:

a) ε = 14.7 μv

b) ε = 21 μv

Explanation:

Given the data in the question;

Diameter of solenoid; d = 3 cm

radius will be half of diameter,  so, r = 3 cm / 2 = 1.5 cm = 1.5 × 10⁻² m

Number of turns; N = 40 turns per cm = 4000 per turns per meter

Current; [tex]I[/tex] = 0.235 A

change in time Δt = 0.40 sec

Now,

We determine the magnetic field inside the solenoid;

B = μ₀ × N × [tex]I[/tex]  

we substitute

B = ( 4π × 10⁻⁷ Tm/A ) × 4000 × 0.235  

B = 1.1881 × 10⁻³ T

Now, Initial flux through the coil is;

∅₁ = NBA = NBπr²  

and the final flux  

∅₂ = 0        

so, the εmf induced ε = -Δ∅/Δt = -( ∅₂ - ∅₁ ) / Δt

= -( 0 - NBπr² ) / Δt  

= NBπr² / Δt    

a)

for N = 7

ε = [ 7 × ( 1.1881 × 10⁻³ ) × π( 1.5 × 10⁻² )² ] / 0.40

ε = 14.7 × 10⁻⁶ v

ε = 14.7 μv      

b)

for N = 10

ε = [ 10 × ( 1.1881 × 10⁻³ ) × π( 1.5 × 10⁻² )² ] / 0.40

ε = 21 × 10⁻⁶ v

ε = 21 μv  

 

A solenoid has a length , a radius , and turns. The solenoid has a net resistance . A circular loop with radius is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance . At a time , the solenoid is connected to a battery that supplies a potential . At a time , what current flows through the outer loop

Answers

This question is incomplete, the complete question is;

A solenoid has a length 11.34 cm , a radius 1.85 cm , and 1627 turns. The solenoid has a net resistance of 144.9 Ω . A circular loop with radius of 3.77 cm is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance of 1651.6 Ω. At a time of 0 s , the solenoid is connected to a battery that supplies a potential 34.95 V. At a time 2.58 μs , what current flows through the outer loop?

Answer:

the current flows through the outer loop is 1.3 × 10⁻⁵ A

Explanation:

Given the data in the question;

Length [tex]l[/tex] = 11.34 cm = 0.1134 m

radius a = 1.85 cm = 0.0185 m

turns N = 1627

Net resistance [tex]R_{sol[/tex] = 144.9 Ω

radius b = 3.77 cm = 0.0377 m

[tex]R_o[/tex] = 1651.6 Ω

ε = 34.95 V

t = 2.58 μs = 2.58 × 10⁻⁶ s

Now, Inductance; L = μ₀N²πa² / [tex]l[/tex]

so

L = [ ( 4π × 10⁻⁷ ) × ( 1627 )² × π( 0.0185 )² ] / 0.1134

L = 0.003576665 / 0.1134

L = 0.03154

Now,

ε = d∅/dt = [tex]\frac{d}{dt}[/tex]( BA ) =  [tex]\frac{d}{dt}[/tex][ (μ₀In)πa² ]

so

ε = μ₀n [tex]\frac{dI}{dt}[/tex]( πa² )

ε = [ μ₀Nπa² / [tex]l[/tex] ] [tex]\frac{dI}{dt}[/tex]

ε = [ μ₀Nπa² / [tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

I = ε/[tex]R_o[/tex] = [ μ₀Nπa² / [tex]R_o[/tex][tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

so we substitute in our values;

I = [ (( 4π × 10⁻⁷ ) × 1627 × π(0.0185)²) / (1651.6 ×0.1134) ] [ ( 34.95 / 0.03154)e^( -2.58 × 10⁻⁶ / 144.9 ) ]

I = [ 2.198319 × 10⁻⁶ / 187.29144 ] [ 1108.116677 × e^( -1.7805 × 10⁻⁸ )

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.116677 × 0.99999998 ]

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.11665 ]

I = 1.3 × 10⁻⁵ A

Therefore, the current flows through the outer loop is 1.3 × 10⁻⁵ A

Answer:

1.28 *10^-5 A

Explanation:

Same work as above answer. Needs to be more precise

Two resistances, R1 and R2, are connected in series across a 12-V battery. The current increases by 0.500 A when R2 is removed, leaving R1 connected across the battery. However, the current increases by just 0.250 A when R1 is removed, leaving R2 connected across the battery.
(a) Find R1.
Ω
(b) Find R2.
Ω

Answers

Answer:

a)   R₁ = 14.1 Ω,   b)  R₂ =  19.9 Ω

Explanation:

For this exercise we must use ohm's law remembering that in a series circuit the equivalent resistance is the sum of the resistances

all resistors connected

           V = i (R₁ + R₂)

with R₁ connected

           V = (i + 0.5) R₁

with R₂ connected

           V = (i + 0.25) R₂

We have a system of three equations with three unknowns for which we can solve it

We substitute the last two equations in the first

           V = i ( [tex]\frac{V}{ i+0.5} + \frac{V}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{1}{i+0.5} + \frac{1}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{i+0.5+i+0.25}{(i+0.5) \ ( i+0.25) }[/tex] ) =  [tex]\frac{i^2 + 0.75i}{i^2 + 0.75 i + 0.125}[/tex]

           i² + 0.75 i + 0.125 = 2i² + 0.75 i

           i² - 0.125 = 0

           i = √0.125

           i = 0.35355 A

with the second equation we look for R1

          R₁ = [tex]\frac{V}{i+0.5}[/tex]

          R₁ = 12 /( 0.35355 +0.5)

          R₁ = 14.1 Ω

with the third equation we look for R2

          R₂ = [tex]\frac{V}{i+0.25}[/tex]

          R₂ =[tex]\frac{12}{0.35355+0.25}[/tex]

          R₂ =  19.9 Ω

Explain why liquid particles at a high pressure would need more
energy to change to a gas than liquid particles at a low pressure.

Answers

Answer:

Liquids evaporate faster as they heat up and more particles have enough energy to break away. The particles need energy to overcome the attractions between them. ... At this point the liquid is boiling and turning to gas. The particles in the gas are the same as they were in the liquid they just have more energy.

An energy efficient light bulb uses 15 W of power for an equivalent light output of a 60 W incandescent light bulb. How much energy is saved each month by using the energy efficient light bulb instead of the incandescent light bulb for 4 hours a day? Assume that there are 30 days in one month
A. 7.2 kW⋅hr
B. 21.6 kW⋅hr
C. 1.8 kW⋅hr
D. 5.4 kW⋅hr
E. 1.35 kW⋅hr

Answers

Answer: (d)

Explanation:

Given

15 W is equivalent to 60 W light that is, it save 45 W

So, for 4 hours it is, [tex]4\times 45=180\ W.hr[/tex]

For 30 days, it becomes

[tex]\Rightarrow 180\times 30=5400\ W.hr\\\Rightarrow 5.4\ kWh[/tex]

Thus, [tex]5.4\ kWh[/tex] is saved in 30 days

option (d) is correct.

1.An elevator is ascending with constant speed of 10 m/s. A boy in the elevator throws a ball upward at 20 m/ a from a height of 2 m above the elevator floor when the elevator floor when the elevator is 28 m above the ground.
a. What's the maximum height?
b. How long does it take for the ball to return to the elevator floor?​

Answers

(a) The maximum height reached by the ball from the ground level is 75.87m

(b) The time taken for the ball to return to the elevator floor is 2.21 s

The given parameters include:

constant velocity of the elevator, u₁ = 10 m/sinitial velocity of the ball, u₂ = 20 m/sheight of the boy above the elevator floor, h₁ = 2 mheight of the elevator above the ground, h₂ = 28 m

To calculate:

(a) the maximum height of the projectile

total initial velocity of the projectile = 10 m/s + 20 m/s  = 30 m/s (since the elevator is ascending at a constant speed)

at maximum height the final velocity of the projectile (ball), v = 0

Apply the following kinematic equation to determine the maximum height of the projectile.

[tex]v^2 = u^2 + 2(-g)h_3\\\\where;\\\\g \ is \ the \ acceleration \ due \ to\ gravity = 9.81 \ m/s^2\\\\h_3 \ is \ maximum \ height \ reached \ by \ the \ ball \ from \ the \ point \ of \ projection\\\\0 = u^2 -2gh_3\\\\2gh_3 = u^2 \\\\h_3 = \frac{u^2}{2g} \\\\h_3 = \frac{(30)^2}{2\times 9.81} \\\\h_3 = 45.87 \ m[/tex]

The maximum height reached by the ball from the ground level (h) = height of the elevator from the ground level + height of he boy above the elevator + maximum height reached by elevator from the point of projection

h = h₁ + h₂ + h₃

h = 28 m + 2 m  +  45.87 m

h = 75.87 m

(b) The time taken for the ball to return to the elevator floor

Final height of the ball above the elevator floor = 2 m + 45.87 m = 47.87 m

Apply the following kinematic equation to determine the time to return to the elevator floor.

[tex]h = vt + \frac{1}{2} gt^2\\\\where;\\\\v \ is \ the \ initial \ velocity \ of \ the \ ball \ at \ the \ maximum \ height = 0\\\\h = \frac{1}{2} gt^2\\\\gt^2 = 2h\\\\t^2 = \frac{2h}{g} \\\\t = \sqrt{\frac{2h}{g}} \\\\t = \sqrt{\frac{2\times 47.87}{9.81}} \\\\t = 2.21 \ s[/tex]

To learn more about projectile calculations please visit: https://brainly.com/question/14083704

Unit of speed is a derived unit. Give reasons​

Answers

Answer:

as it 8s based upon to fundamental units distance and Time

5. A body falls freely from rest. It covers as much distance in the last second of its
motion as covered in the first three seconds. The body has fallen for a time of:
B) 5s
C) 7s
D) 9s
A) 35

Answers

Answer:

B 5s

Explanation:

Because of the Displacement in the nth second of the free fall is 

Snth=21g(t12−t22)

Given that (tn−tn−1)=1

Displacement in 3 seconds of the free fall 

S=21gt2

S=21×10×32

S=45m

Given that: Snth=45

On solving that we get:

t1=5sec

In the Bohr model of the hydrogen atom, an electron in the 3rd excited state moves at a speed of 2.43 105 m/s in a circular path of radius 4.76 10-10 m. What is the effective current associated with this orbiting electron

Answers

Answer:

Current =,charge / time

Charge = e = 1.6E-19 coulombs

t = T time for 1 revolution  (period)

v = S / T = distance traveled in 1 revolution / time for 1 revolution

T = S / v = 2 pi * 4.76E-10 / 2.43E5 = 1.23E-14

I = Q / T = 1.6E-19 / 1.23E-14 = 1.30E-5

Both of these questions are the same but their answers in the answer key are different. Why?

Answers

the person making the assignment must’ve made a mistake.

the 2kg block slids down a firctionless curved ramp starting from rest at heiht of 3m what is the speed of the block at the bottemvof the ramp​

Answers

A

Explanation:

1qdeeeeeeeeeeehhhhhhhhhwilffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff.

An ideal double slit interference experiment is performed with light of wavelength 640 nm. A bright spot is observed at the center of the resulting pattern as expected. For the 2n dark spot away from the center, it is known that light passing through the more distant slit travels the closer slit.
a) 480 nm
b) 600 nm
c) 720 nm
d) 840 nm
e) 960 nm

Answers

Answer:

960 nm

Explanation:

Given that:

wavelength = 640 nm

For the second (2nd) dark spot;  the order of interference m = 1

Thus, the path length difference is expressed by the formula:

[tex]d sin \theta = (m + \dfrac{1}{2}) \lambda[/tex]

[tex]d sin \theta = (1 + \dfrac{1}{2}) 640[/tex]

[tex]d sin \theta = ( \dfrac{3}{2}) 640[/tex]

dsinθ = 960 nm

đổi đơn vị
42 ft2/hr to cm2/s

Answers

Answer:

X = 10.8387 cm²/s

Explanation:

In this exercise, you're required to convert a value from one unit to another.

Converting 42 ft²/hr to cm²/s;

Conversion:

1 ft² = 929.03 cm²

42 ft² = X cm²

Cross-multiplying, we have;

X = 42 * 929.03

X = 39019.26 cm²

Next, we would divide by time in seconds.

1 hour = 3600 seconds

X = 39019.26/3600

X = 10.8387 cm²/s

which energy does a car travelling 30 m/ph as it slows have:

a). chemical energy
b). thermal energy
c). kinetic energy

please helpp

Answers

Answer:

c) kinetic energy

Explanation:

Answer: C)  kinetic energy

Explanation:

The speed of a horse is 134 meters per second how long does it takes to travel a distance of 19,311?

Answers

Answer:

just need some focus

Explanation:

tan 13. The speed of a horse is 134 meters per second how long does it take to travel a distance of 19,311m? M+ tud V 134 14. You are walking down the block and see your neighbor's pitbull 30 meters away, out of the fence, starring at you. Suddenly, he starts running towards you at 20m/s. How long will it be before you're the pitbull's lunch?  V 15. A pendulum has a frequency of 2 Hz what is it's period. T = 1/2 16. You have just finished a 1600 mile trip, and it took you 16 hours. What was your average speed V = Ad At 17. You are flying from New York, NY to SanFrancisco California, a distance of 2582 miles, it takes 6.33hrs to complete the flight what was your average speed? give answer in m/s. V = Ad = At 3 of 6

What is cubical expansivity of liquid while freezing

Answers

Answer:

"the ratio of increase in the volume of a solid per degree rise of temperature to its initial volume" -web

Explanation:

tbh up above ✅

Answer:

cubic meter

Explanation:

Increase in volume of a body on heating is referred to as volumetric expansion or cubical expansion

What is utilization of energy

Answers

Explanation:

Energy utilization focuses on technologies that can lead to new and potentially more efficient ways of using electricity in residential, commercial and industrial settings—as well as in the transportation sector

8. A mass of 10 Kg is accelerating at 3 m/s2. What is the applied net force?

Answers

Answer:

Explanation:

F = ma

F = (10)(3)

F = 30 N

Answer:

[tex]\boxed {\boxed {\sf 30 \ Newtons}}[/tex]

Explanation:

We are asked to find the applied net force. According to Newton's Second of Law, force is the product of mass and acceleration.

[tex]F= m \times a[/tex]

The object has a mass of 10 kilograms and it is accelerating at 3 meters per second squared.

m= 10 kg a= 3 m/s²

Substitute the known values into the formula.

[tex]F= 10 \ kg \times 3 \ m/s ^2[/tex]

Multiply.

[tex]F= 30 \ kg \times m/s^2[/tex]

1 kilogram meter per second squared is equal to 1 Newton, so our answer of 30 kg × m/s² is equal to 30 N.

[tex]F= 30 \ N[/tex]

The applied net force is 30 Newtons.

Serena wants to play a trick on her friend Marion. She adds salt, sugar, and vinegar into her glass of water when Marion is out of the room. Why does she know that Marion will drink the water?

Answers

Maybe because they’re friends and the stuff she put in there will become clear again, leaving the water clear and the friend without any suspicions?
Other Questions
someone please help asap In The First Some by Don Aker Who has respect for themselves? Iookat thequestionfor one minute before you listen.1,what areas does the speaker say the talk will focus on? 2,what's the difference between the spoken language and reading? find the missing side lengths Evaluate Sigma 5 n=1 3(-2)^n-1Answer choices-93-333393 How were the views of France and the United Kingdom similar at the end of World War I?They each planned to adopt President Wilsons Fourteen Points.They believed that Germany needed to rebuild its economy.They were opposed to taking part in secret agreements.They wanted Germany to be punished for the destruction caused during the war. Lmk if you understand thanks The president of the math club is conducting a survey to see where the 12th grade class wants to go to their field trip. Instead of asking the whole class, she surveys only the 12th grade members of the math club. She records the choices and plans to present the results to the school principal. what kind of sampling did she use? What is the slope of the line? An _____________________________ is an answer that falls outside of the domain of the function. Two cars that are 600km apart are moving towards each other. Their speeds differ by 6km per hour and the cars are 123km apart after 4.5 hours. Find the speed of each car Which of the following are characteristics of the Baroque Period?A emotion and religious fervorB psychological exploration and virtuously C movement spender and ornate stylingD all of the above A word's connotation is ---O its part of speechO its dictionary definitionO the emotions or associations that are evoked by the wordits context in a sentence , , , , : In each following find x. Leave answer in simplified radical form. Choose the correct answer.Websites that are not well known may have a?great source of informationlibrarian that can help youO hidden agendaO database to help you find great information Which sentence most clearly makes an ethos appeal?A. Evidence shows that four day work weeks improve productivityB. Clearly, you can't have farmland without first finding good soil.C. More cash is better than less cash; that's just common sense,OOD. As a doctor, I have seen many similar cases, this is nothing new.SUM has been in and out of drug rehabilitation programs several times over the last few years. Recently, she gave birth to a baby girl. The doctor noticed that the infant showed symptoms of tremors, irritability, abnormal crying, disturbed sleep, and impaired motor control. The doctor diagnosed these withdrawal symptoms as the effects of a drug to which Jazlyn was addicted. Identify the drug. 1/4 + 4/10 what is the answer plz give correct what factors shape the poets identities?