Answer: $68,000
Explanation:
If the inventory that remains is the $46,000 then that means that the cars costing $33,000 and $24,000 have been sold.
With specific identification, the actual prices of the stock are used so the cost of goods sold is:
= 24,000 + 33,000
= $57,000
The gross profit is therefore:
= Sales - Cost of goods sold
= 125,000 - 57,000
= $68,000
Forsyth Company manufactures one product, it does not maintain any beginning or ending inventories, and its uses a standard cost system. During the year, the company produced and sold 10,000 units at a price of $155 per unit. Its standard cost per unit produced is $125 and its selling and administrative expenses totaled $245,000. Forsyth does not have any variable manufacturing overhead costs and it recorded the following variances during the year:
Materials price variance $6,800 F
Materials quantity variance $10,500 U
Labor rate variance $3,800 U
Labor efficiency variance $4,700 F
Fixed overhead budget variance $2,800 F
Fixed overhead volume variance $12,300 F
Required:
a. When Forsyth closes its standard cost variances, the cost of goods sold will increase (decrease) by how much?
b. Prepare an income statement for the year.
Answer:
a. Cost of goods sold will decrease by $12,300.
b. Net income = $67,300
Explanation:
a. When Forsyth closes its standard cost variances, the cost of goods sold will increase (decrease) by how much?
This can be determined by calculating the net variance as follows:
Forsyth Company
Calculation of Net Variance
Details Amount ($)
Materials price variance (F) 6,800
Materials quantity variance (U) (10,500)
Labor rate variance (U) (3,800)
Labor efficiency variance (F) 4,700
Fixed overhead budget variance (F) 2,800
Fixed overhead volume variance (F) 12,300
Net variance 12,300
Since the net variance of $12,300 is positive which is favorable, this implies that the cost of goods sold will decrease by $12,300.
b. Prepare an income statement for the year.
The income statement for the year can be prepared as follows:
Forsyth Company
Income Statement for the Year
Details $ $
Sales (10,000 * $155) 1,550,000
Cost of goods sold (COGS):
Standard COGS (10,000 * $125) (1,250,000)
Net variance 12,300
Net Cost of goods sold (1,237,700)
Gross margin 312,300
Selling and administrative expenses (245,000)
Net income 67,300
Han Products manufactures 29,000 units of part S-6 each year for use on its production line. At this level of activity, the cost per unit for part S-6 is:
Direct materials $3.70
Direct labor 12.00
Variable manufacturing overhead 2.30
Fixed manufacturing overhead 9.00
Total cost per part $27.00
An outside supplier has offered to sell 29,000 units of part S-6 each year to Han Products for $23 per part. If Han Products accepts this offer, the facilities now being used to manufacture part S-6 could be rented to another company at an annual rental of $79,000. However, Han Products has determined that two-thirds of the fixed manufacturing overhead being applied to part S-6 would continue even if part S-6 were purchased from the outside supplier.
Required:
What is the financial advantage (disadvantage) of accepting the outside supplier’s offer?
Answer:
Financial advantage of accepting supplier's offer = $21,000
Explanation:
Relevant costs saved by outsourcing production:
Direct materials $3.70
Direct labor $12.00
Variable manufacturing overhead $2.30
Fixed manufacturing overhead $9.00 * 1/3 = $3
Total cost per part $21.00
Total savings per year = $21 * 29,000 = $609,000
Additional rental income = $79,000
Total = $688,000
Cost of purchasing 29,000 parts = $23 * 29,000 = $667,000
Financial advantage of accepting supplier's offer = $21,000
bRamapo Company produces two products, Blinks and Dinks. They are manufactured in two departments, Fabrication and Assembly. Data for the products and departments are listed below. Product Number of Units Direct Labor Hours Per Unit Machine Hours Per Unit Blinks 1,048 4 7 Dinks 2,236 5 6 All of the machine hours take place in the Fabrication department, which has an estimated overhead of $82,200. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $102,000. Ramapo Company uses a single plantwide overhead rate to apply all factory overhead costs based on direct labor hours. The factory overhead allocated per unit of Dinks is
Answer:
Ramapo Company
The factory overhead allocated per unit of Dinks is:
= $56.94.
Explanation:
a) Data and Calculations:
Product Number of Units Direct Labor Machine
Hours Per Unit Hours Per Unit
Blinks 1,048 4 7
Dinks 2,236 5 6
Fabrication Assembly
Estimated overhead $82,200 $102,000
Machine hours:
Blinks 7,336
Dinks 13,416
Total machines hours 20,752
Direct Labor hours:
Blinks 4,192
Dinks 11,180
Total machines hours 15,372
Total factory overhead Blinks Dinks
Fabrication department $29,058 $53,142
Assembly department 27,816 74,184
Total allocated overhead $56,874 $127,326
Units produced 1,048 2,236
Factory overhead per unit $54.27 $56.94 ($127,326/2,236)
The following information is from Princeton Company's comparative balance sheets.
At December 31 Current year Priro year
Common stock, $10 par value $124,000 118,000
Paid—in capital in excess of par 585,000 351,000
Retained earnings 331,500 305,500
The company's net income for the current year ended December 31 was $57,000.
Required:
Write down the T-accounts to calculate the cash received from the sale of its common stock during the current year.
Answer:
cash received = $ 240,000
Explanation:
On calculating the common stock $10 par
Beg. balance - $ 118,000
$6,000 - Issuance of common stock
Thus the ending balance = $124,000
On calculating the paid in capital in excess of par
Beg. balance - $ 351,000
$ 234,000 - Issuance of common stock
Thus the end balance - $ 585,000
Therefore,
The cash received - $ 240,000
Suppose that a small family farm sold its output for $100,000 in a given year. The family spent $25,000 on fuel; $40,000 on seed, fertilizer, and pesticides; and $25,000 on equipment, including maintenance. The family members could have earned $20,000 working at other occupations. What is the family's accounting cost? What is the family's economic cost? Could the family's economic cost ever exceed its accounting cost? Why or why not?
Answer:
Accounting Cost
Accounting costs refers to the explicit costs which ar the actual costs related to the business venture. In this case that would be:
= Fuel costs + Seed costs + Equipment
= 25,000 + 40,000 + 25,000
= $90,000
Economic cost
This includes the accounting costs and then adds the implicit costs which are the opportunity costs of choosing the current business venture. In this case it is the $20,000 they could have been making working at other occupations.
= Accounting cost + Salary foregone
= 90,000 + 20,000
= $110,000
Economic costs will always be higher than Accounting costs because they include both the accounting costs and opportunity costs.
Stacy Cool wants to invest her money to earn at least 14%. A friend who is interested in investments has suggested her to buy a bond issued by the Buckeye Bravo Company that will mature in seven years. It has a face value of $1,000, pays an annual coupon of $110, and currently sells for $950. Should she buy this bond
Answer:
no
the yield to maturity is 12% which is less than 14%
Explanation:
To determine if Stacy should buy the bond, determine the yield to maturity of the bond
yield to maturity can be determined using a financial calculator
Cash flow in year 0 = -950
Cash flow in year 1 - 6 = 110
Cash flow in year 7 = 110 + 1000
YTM = 12.1%
The YTM is less than the minimum return she wants. So, she should not buy the bond
To determine YTM using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. After inputting all the cash flows, press the IRR button and then press the compute button.
To determine YTM using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. After inputting all the cash flows, press the IRR button and then press the compute button.
An organization's job structure consists of relative pay for different functions and different levels of responsibility.
a. True
b. False
Answer:
a). True
Explanation:
The given statement asserts a true claim that the job structure of an organization comprises of corresponding pay scales for the different employees performing different activities and functions according to the levels of authority or leadership they have been provided. The job structure is the aspect that establishes the hierarchy or of various ranks and positions in which the company is organized to aptly manage the running of the business and its associated activities successfully and efficiently. Thus, the statement is true.
The following information is available for Lock-Tite Company, which produces special-order security products and uses a job order costing system. April 30 May 31 Inventories Raw materials $ 33,000 $ 32,000 Work in process 9,400 20,800 Finished goods 50,000 34,600 Activities and information for May Raw materials purchases (paid with cash) 171,000 Factory payroll (paid with cash) 250,000 Factory overhead Indirect materials 12,000 Indirect labor 57,500 Other overhead costs 110,000 Sales (received in cash) 1,700,000 Predetermined overhead rate based on direct labor cost 55 % Exercise 19-7 Cost flows in a job order costing system LO P1, P2, P3, P4 Compute the following amounts for the month of May using T-accounts. Cost of direct materials used. Cost of direct labor used. Cost of goods manufactured. Cost of goods sold\.\* Gross profit. Overapplied or underapplied overhead. *Do not consider any underapplied or overapplied overhead.
Answer:
Lock-Tite Company
Cost of direct materials used = $160,000
Cost of direct labor used = $192,500 ($250,000 - $57,500)
Cost of goods manufactured = $446,975
Cost of goods sold = $462,375
* Gross profit = $1,237,625
Overapplied or underapplied overhead = $73,625
*Do not consider any underapplied or overapplied overhead.
Explanation:
a) Data and Calculations:
Inventories April 30 May 31
Raw materials $ 33,000 $ 32,000
Work in process 9,400 20,800
Finished goods 50,000 34,600
Activities and information for May:
Raw materials purchases (paid with cash) 171,000
Factory payroll (paid with cash) 250,000
Factory overhead:
Indirect materials 12,000
Indirect labor 57,500
Other overhead costs 110,000
Sales (received in cash) 1,700,000
Predetermined overhead rate based on direct labor cost 55 %
T-accounts:
Raw materials
Date Account Titles Debit Credit
April 30 Inventory balance $ 33,000
May Cash 171,000
May Factory overhead $12,000
May Work in process 160,000
May 31 Inventory balance $ 32,000
Work in process
Date Account Titles Debit Credit
April 30 Inventory balance $ 9,400
May Raw materials 160,000
Factory payroll 192,500
Factory overhead 105,875
Finished goods $446,975
May 31 Inventory balance $ 20,800
Finished goods
Date Account Titles Debit Credit
April 30 Inventory balance $ 50,000
May Work in process 446,975
May Cost of goods sold $462,375
May 31 Inventory balance $ 34,600
Factory overhead
Date Account Titles Debit Credit
May Raw materials 12,000
Payroll 57,500
Other expenses 110,000
May Work in process $105,875
May Underapplied overhead 73,625
Sales revenue = $1,700,000
Cost of goods sold (462,375)
Gross profit $1,237,625
Define ethics and law and show how they are different and similar.
Answer: The law sets minimum standards of behavior while ethics set maximum standards. Laws are created and enforced by governments based on society's ethics to mediate our relationships with each other and to protect their citizens.
On Jan. 1, 2018, your cousin, Laura, purchased one $1,000, 5-year semiannual bond with a coupon rate of 8%. The yield of the bond was 8% at the time. How much did Laura pay for the bond?
Answer:
the amount pay for the bond is $1,000
Explanation:
The computation of the amount pay for the bond is shown below:
Given that
Future value be $1,000
NPER is 5 × 2 = 10
RATE = 8% ÷ 2 = 4%
PMT = $1,000 × 8% ÷ 2 = $40
The formula is given below:
=-PV(RATE,NPER,PMT,FV,TYPE)
After applying the above formula, the present value is $1,000
Hence, the amount pay for the bond is $1,000
Investors with 30 per cent of the voting stock of a corporation, interested in a seat on the board of directors, had better have __________ voting privileges. a. straight b. cumulative c. proxy d. limited
Answer:
B)cumulative
Explanation:
On January 1, 20X1 when the effective interest rate was 14%, a company issued bonds with a maturity value of $1,000,000. The stated rate of interest is 12%, the bonds pay interest semi-annually and sold for $893,640. The amount of bond discount amortized on July 1, 20X1 is approximately:__________.
Answer: $2,555
Explanation:
Bond discount amortization = Interest cost - Coupon payment
Coupon payment = Stated interest * Par value
= 12% * 1,000,000 * 6/12 months
= $60,000
Interest cost = Issue price * effective interest
= 893,640 * 14% * 6/12
= $62,554.80
Amortized amount:
= 62,554.80 - 60,000
= $2,554.80
= $2,555
What are targets for a business to achieve?
A. Objectives
B. Smart goals
C. Social enterprises
D. Profits
Dunbar sold 640 units of inventory during the month. Ending inventory assuming weighted-average cost would be: (Round weighted-average unit cost to 4 decimal places and final answer to the nearest dollar amount.)
Answer:
$428.13
Explanation:
Note The missing word have been attached as picture below
Weighted average cost per unit = [(450*$2.18) + (370*$2.62)] / (450 + 370)
Weighted average cost per unit = ($981 + $969.4) / 820
Weighted average cost per unit = $1950.4 / 820
Weighted average cost per unit = 2.378536585365854
Weighted average cost per unit = $2.3785
Ending inventory unit = 450 + 370 - 640
Ending inventory unit = 180
Value of ending inventory = $2.3785 * 180 units
Value of ending inventory = $428.13
Money markets trade securities that: _______________
I. mature in one year or less.
II. have little chance of loss of principal.
III. must be guaranteed by the federal government.
a. I and III only
b. I only
c. I and II only
d. I, II, and III
Madison Corporation sells three products (M, N, and O) in the following mix: 3:1:2. Unit price and cost data are: M N OUnit sales price$12 $10 $11Unit variable costs 9 8 9Total fixed costs are $585,000. The selling price per composite unit for the current sales mix (rounded to the nearest cent) is:
Answer:
Selling price per composite unit= $11.3
Explanation:
Giving the following information:
Madison Corporation sells three products (M, N, and O) in the following mix: 3:1:2.
Unit price and cost data are: M N OUnit sales price$12 $10 $11
First, we need to calculate the sales proportion for each product:
M= 3/6= 0.5
N= 1/6= 0.17
O= 2/6= 0.33
Now, the selling price per composite unit:
Selling price per composite unit= (0.5*12) + (0.17*10) + (0.33*11)
Selling price per composite unit= $11.3
What is the present value of an annuity that pays $58 per year for 13 years and an additional $1,000 with the final payment
Answer:
$882.03
Explanation:
Interest rate used is 7.23%
Present value is the sum of discounted cash flows
Present value can be calculated using a financial calculator
Cash flow in year 1 to 12 = 58
cash flow in year 13 = 1058
I = 7.23
To find the PV using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Tucker Company's Work in Process account decreased by $1,000, while its Finished Goods Inventory account increased by $500. Assuming total manufacturing costs were $5,000, what was the company's cost of goods sold amount?
Answer:
$5500.
Explanation:
The computation of the cost of goods sold is shown below:
Let us assume beginning WIP be $2000
So,
ending WIP is
= ($2000 - $1000)
= $1000
And,
Let us assume the beginning finished goods be $1000
So, the ending finished goods is
= ($1000 + $500)
= $1500
Now as we know that
Cost of goods manufactured = Total manufacturing cost + Beginning WIP - Ending WIP
= $5000 + $2000 - $1000
= $6000
Now
cost of goods sold=Cost of goods manufactured+Beginning finished goods-Ending finished goods
= $6000 + $1000 - $1500
=$5500.
Well Water Inc. wants to produce and sell a new flavored water. In order to penetrate the market, the product will have to sell at $2.00 per 12 oz. bottle. The following data has been collected:
Annual sales......................................................50,000 bottles
Projected selling and administrative costs.....$8,000
Desired profit.....................................................$80,000
The target cost per bottle is:__________
Answer:
The answer is "0.4".
Explanation:
[tex]\\\to \text{Total Cost of Goods Sold = Sales revenue - Desired profit}[/tex]
[tex]= (2\times 50,000) - 80,000\\\\= 1,00,000 - 80,000\\\\= 20,000[/tex]
Calculating the target cost per bottle:
[tex]= \frac{\text{Total cost of goods sold}}{ \text{units sold}}\\\\= \frac{20,000}{50,000}\\\\= \frac{2}{5}\\\\= 0.4[/tex]
Question 4
Which of the following is an example of an asset?
A. Repairs and Maintenance
B. Accounts Receivable
C. Accounts Payable
D. GST Collected
Answer:
Accounts Receivable
Explanation:
A is an expense, C and D are liabilities
A sporting equipment store expects to purchase $8,200 of ski boots in October. The store had $2,800 of ski boots in merchandise inventory at the beginning of October, and expects to have $1,800 of ski boots in merchandise inventory at the end of October to cover part of anticipated November sales. What is the budgeted cost of goods sold for October?
a) $7,000.
b) $9,000.
c) $8,000.
d) $12,000.
e) $11,000.
Answer:
$9,200
Explanation:
Calculation to determine the budgeted cost of goods sold for October
Using this formula
Budgeted cost of goods sold for October =Cost of ski boots + Inventory at the beginning - Inventory at the end
Let plug in the formula
Budgeted cost of goods sold for October = $2800 + $8200 - $1800
Budgeted cost of goods sold for October= $9200
Therefore the budgeted cost of goods sold for October is $9,200
Broker Pat received an offer for a listing along with a $5,000 check from the buyer as an earnest money deposit. When the owner accepts the offer, Pat should handle the check in any of the following ways, except to:____.
a. deposit the check into Pat's brokerage account.
b. give the check to the owner of the property.
c. give the check to the escrow agent.
d. deposit the check in Pat's trust fund account.
Answer:
b. Give the check to the owner of the property.
Explanation:
Pat is a broker who has received an offer for a listing along with check. He can give the check to an escrow agent or deposit the check into pat's brokerage account. he cannot give check directly to the owner of the property.
An electronics company makes communications devices for military contracts. The company just completed two contracts. The navy contract was for 2,540 devices and took 27 workers two weeks (40 hours per week) to complete. The army contract was for 5,940 devices that were produced by 37 workers in three weeks (40 hours per week). a. Calculate the productivity for navy and army contracts in units produced per labor hour.
Answer:
Explanation:
For Navy contract, the total number of man hours put into production will be:
= 27 × 40 × 2
= 2160 man hours
Then, the units produced per labor hour will be:
= 2540 devices / 2160
= 1.176 units per labor hour.
For Army contracts, the total number of man hours put into production will be:
= 37 × 40 × 3
= 4440 man hours
Then, the units produced per labor hour will be:
= 5940/4440
= 1.338 units per labor hour.
g If there is a breach of contract, the objective of the remedy in the breach contract case will be to: Question 21 options: place the parties back into the position that they would have been in had there been no contract punish the party that committed breach of contract provide both parties relief place the non breaching party into the position that they would have been had the contract not been breached
Answer: place the non breaching party into the position that they would have been had the contract not been breached
Explanation:
A contract is meant to satisfy the reasons for which the contract was gone into for both parties. If one party breaches the contract, the party that did not breach should still have their reason for entering the contract satisfied because they did what they were supposed to do according to the contract.
This is why the purpose of a breach of contract remedy is to ensure that this non-breaching party does indeed get what was supposed to come to them by the contract.
Andrews Corporation has income from operations of $240,000. In addition, it received interest income of $24,000 and received dividend income of $29,500 from another corporation. Finally, it paid $11,800 of interest income to its bondholders and paid $45,000 of dividends to its common stockholders. The firm's federal tax rate is 21%. What is the firm's federal income tax
Answer: $54,820.50
Explanation:
Federal income tax = Taxable income * tax rate
Taxable income = Income from operations + Interest income received + Dividend income received - Interest income paid
= 240,000 + 24,000 + (30% * 29,500) - 11,800
= $261,050
Federal income tax = 261,050 * 21%
= $54,820.50
Note: Only 30% of Dividends received are taxable
Fruit Computer Company makes a fruit themed computer. Variable costs are $220 per unit, and fixed costs are $32,000 per month. Fruit Computer Company sells 500 units per month at a sales price of $300. The company believes that it can increase the price if the computer quality is upgraded. If so, the variable cost will increase to $240 per unit, and the fixed costs will rise by 50%. The CEO wishes to increase the company's operating income by 25%. Which sales price level would give the desired results
Answer:
Fruit Computer Company
The sales price level that would give the desired results is:
= $356 per unit
Explanation:
a) Data and Calculations:
Variable costs per unit = $220
Fixed costs per month = $32,000
Monthly sales units = 500 units
Selling price per unit = $300
Before Change After Change
Sales revenue $150,000 $178,000 ($168,000 + $10,000)
Variable costs 110,000 120,000
Fixed costs 32,000 48,000
Total costs $142,000 $168,000
Operating income $8,000 $10,000 ($8,000 * 1.25)
The sales price level that would give the desired results is $356 ($178,000/500). This represents an increase of 18.7% ($56/$300 * 100).
Which of the following food borne illness has a preventative vaccine
A. E.coli
B.norovirus
C. Hep. A
D. Shigella
Answer:
C. Hep. A
Explanation:
From the available options, Hep. A is preventable with a vaccine. The vaccine was created in 1995. It is administered to individuals in two seperate doses and usually done with a time span of 6 months between dose. Having both doses administered helps prevent the individuals from the Hep. A virus long term. Like most vaccines, this one has a 95% effectiveness for preventing the virus from affecting the individual's body.
During its first year of operations, the McCormick Company incurred the following manufacturing costs: Direct materials, $4 per unit, Direct labor, $2 per unit, Variable overhead, $3 per unit, and Fixed overhead, $160,000. The company produced 20,000 units, and sold 15,000 units, leaving 5,000 units in inventory at year-end. What is the value of ending inventory under absorption costing
Answer: $85,000
Explanation:
Find out the cost of per unit of inventory under absorption costing:
= Direct materials + Direct labor + Variable overhead + Fixed overhead per unit
= 4 + 2 + 3 + 160,000 / 20,000 units
= 4 + 2 + 3 + 8
= $17 per unit
If 5,000 units are left, the value of those units are:
= 5,000 * 17
= $85,000
Meyer Company reported the following for its recent year of operation:
From Income Statement:
Depreciation Expense $1,000
Loss on the Sale of Equipment (3,000)
From the comparative balance sheet:
Beginning balance, equipment $12,500
Ending balance, equipment 8,000
Beginning balance, accumulated depreciation 2,000
Ending balance, accumulated depreciation 2,600
No new equipment was purchased during the year. What was the selling price of the equipment?
Answer:
$900
Explanation:
Calculation to determine the selling price of the equipment
First step
Cost of equipment sold = Beginning balance - Ending balance
Cost of equipment sold=$12,500-$8,000
Cost of equipment sold=$4,500
Second step
Ending balance= Beginning balance + Depreciation expense - Accumulated depreciation on equipment sold
Ending balance=$2,000+$1,000-$600
Ending balance=$2,400
Third step
Book value = Cost of equipment sold - Accumulated depreciation on equipment sold
Book value=$4,500-$600
Book value=$3,900
Now let determine the selling price of the equipment
Selling price=$3,000-$3,900
Selling price=$900
Therefore the selling price of the equipment.is $900
Kiwi Plc sold an antique painting which had been purchased inJanuary 1996 for £21,000. It was sold for £4,200 in January 2021. The proceeds were received net of auction fees of £650. What is Kiwi Plc's allowable loss?
Answer:
$17,450
Explanation:
The antique painting that was bought in January 1996 was sold for $21,000
It was sold for 4,200 in January 2021
It received a net auction fee of 650
Therefore the allowable loss can be calculated as follows
= 21,000-4200+650
= 17,450
Hence the allowable loss is $17,450
