Answer:
In redox reactions, electrons are transferred from one species to another. If the reaction is spontaneous, energy is released, which can then be used to do useful work. To harness this energy, the reaction must be split into two separate half reactions: the oxidation and reduction reactions. The reactions are put into two different containers and a wire is used to drive the electrons from one side to the other. In doing so, a Voltaic/ Galvanic Cell is created.
Explanation:
When a redox reaction takes place, electrons are transferred from one species to the other. If the reaction is spontaneous, energy is released, which can be used to do work. Consider the reaction of a solid copper (Cu(s)) in a silver nitrate solution (AgNO3(s)).
he AgNO3(s) dissociates in water to produce Ag+(aq) ions and NO−3(aq) ions. The NO3-(aq) ions can be ignored since they are spectator ions and do not participate in the reaction. In this reaction, a copper electrode is placed into a solution containing silver ions. The Ag+(aq) will readily oxidize Cu(s) resulting in Cu2+(aq), while reducing itself to Ag(s).
This reaction releases energy. When the copper electrode solid is placed directly into a silver nitrate solution, however, the energy is lost as heat and cannot be used to do work. In order to harness this energy and use it do useful work, we must split the reaction into two separate half reactions; The oxidation and reduction reactions. A wire connects the two reactions and allows electrons to flow from one side to the other. In doing so, we have created a Voltaic/ Galvanic Cell.
2. Based on the following balanced equation:
2 NH3 + 202 N2O + 3 H2O
a. How many moles of O2 are required to react completely with 3.00 moles of NH3?
1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00
b. How many moles of H20 are produced after complete reaction of 3.00 moles of NH3?
1.00
1.50 2.00 2.50 3.00
3.50 4.00 4.50 5.00
c. How many moles of N O are produced after complete reaction of 3.00 moles of NH3?
1.00 1.50 2.00 2.50 3.00
3.50
4.00 4.50 500
To do this, just take the given miles and multiply it with the ratio of molecules in the chemical equation to get your answer.
Which of the following statements is incorrect for the reaction of 1,3- butadiene with a substituted alkene CH2=CHX when X is a nitro group?
Answer:
hugsvsbsbbsnjsjsnsbsbbzbd
Which of the following examples shows an increase of energy in the particles of matter? (Select THREE that are true)
liquid to solid
liquid to gas
gas to liquid
OOO
solid to liquid
solid to gas
A complete reaction indicated by the chemical equation below produces 79.0 g of sulfur. Estimate the number of hydrogen atoms found in the amount of water that forms as a second product in this reaction.
2 H2S(g) + SO2(g) → 3 S(s) + 2 H2O(l)
a. 1.98 × 10^24 atoms
b. 4.80 × 10^23 atoms
c. 6.40 × 10^25 atoms
d. 1.02 × 10^26 atoms
e. 3.00 × 10^24 atoms
Answer: A, 1.98x10^24 atoms of H
Explanation: 39.0 g of sulfur = (79.0g/32.1 g/mole) = 2.46 moles S
The balanced equation promises we'll get 2 moles H2O for every 3 moles ofS, a molar ratio of (2 moles H2O)/(3 moles S)
(2.46 moles S)*[(2 moles H2O)/(3 moles S)] = 1.64 moles H2O
(1.64 moles H2O)*(6.02x10^23 molecules H2)/mole H2O)*(2 H atoms/H2O molecule) = 1.97x10^24 atoms of H
what is joules? plz help
Please help thank you (15 points)
Answer:
Jupiter.
Explanation:
Jupiter has the fastest axial rotation time (day) in the list of answers, based on the fact that its day is only 10 hours long.
what is x if x - 2 =0
Answer:
x-2 = 0
x = 2
hope this was help full
What is the correct clases for this drugs
Promethazine
heelp me please
Answer:
MedlinePlus Drugs Information
Explanation:
Promethazine is in a class of medication called phenothiazines
which function of lysosomes is carried out by vacuoles in plant cells
Answer:
Lysosomes are predominantly found in eukaryotic animal cells and are responsible for breaking down cellular debris
Explanation:
Element X forms the ion X22- What is the formula of the covalent compound X forms with chlorine?
A XCI
B XCl2
C XCl3
D XCl4
Answer:
the answer is mostly option a)XCl
Explanation:
If I have a bottle of compound X at a pressure of 45 atm and temperature of 100 °C, what will happen if I raise the temperature to 400 °C?*
Answer:
55/350
Explanation:
because the answer is in the middle of 50and 400
2. An Isotope of technetium, mixed with sulphur and colloidally dispersed in water, is frequentyused in diagnosing various medical conditions because it is readily taken up by various tissues Prior to excretion. Explain why this important
mixture is not a true solution.
Answer:
This is not a true solution because the colloidal dispersion is not completely homogeneous, and it does not have uniform properties throughout.
Explanation:
hope i helped
Which of these statements best describes how mining of minerals helps solve societal problems?
A) By reducing pollution in air.
B) By removing contaminants from the soil.
C) By improving the condition of groundwater.
D) By providing jobs to the unemployed people
Answer:
d cause it is
Explanation:
Choose the best possible answer for Q.No. A, B, and C.
The following is an acid-base reaction between sulfuric acid and aluminum hydroxide. Use the provided molar masses to answer the questions below:
molar
mass
3 H2SO4
+
2 Al(OH)3
⟶
Al2(SO4)3
+
6 H2O
g/mol
98.08
78.00
342.15
18.02
Note: You need to upload the documents for A, B, and C to show your work.
A. How many moles of sulfuric acid would be required to form 65.21g of Water?
moles of H2SO4 = ________
[ Select ]
B. How many grams of Aluminum Sulfate could be formed if 197.0g aluminum hydroxide reacts with sulfuric acid?
mass of Al2(SO4)3 = ________
[ Select ]
C. To determine the concentration of a sulfuric acid sample, a titration is performed with the above reaction. What is the concentration of the sulfuric acid if a 15.00mL sample reached its titration endpoint with 29.26mL of 0.2855M Al(OH)3?
Molarity of H2SO4 = ________
[ Select ]
Answer:
c i think
Explanation:
The Coca- cola is diluted and reacted with molybdate/metavanadate reagent before the %T is measured.
a. True
b. False
Answer:
true
Explanation:
I believe that is the correct answer (if right brainiest plz)
When salt dissolves completely into water, which term is used to describe the water?
Answer:
A salt that is dissolved in water is called a solute
Once you have dissolved the salt - you have a solution
The water is called the solvent
Explanation:
We have that When salt dissolves completely into water the water is called a Solvent
it is important to not that once the salt compound comes into water it breaks down the molecule apart the Na on one hand and the Cl on the other hand
Once the NaCl is dissolved in to the H_2O it is known as a solute of salt
And when When salt dissolves completely into water the water is called a Solvent
Therefore
When salt dissolves completely into water the water is called a Solvent
For more information on this visit
https://brainly.com/question/1689737?referrer=searchResults
Identify whether the solubility of Ag_2CrO_4 will increase or decrease by adding the following agents.
a. Na2CrO4
b. HCl
c. NH3
When 0.60 mol NH 3 is decomposed in a 1 Liter flask at 850 K, the equilibrium concentration of NH3 is measured as 0.12 M. Given that ammonia decomposes according to the reaction
2 NH3(g) ⇌ N2(g) + 3 H2(g),
what is Kc for the reaction?
a. 0.16
b. 12.00
c. 1.44
d. 6.22
e. 0.75
Answer:
in a 1 Liter flask at 850 K, the equilibrium concentration of NH3 is measured as 0.12 M. Given that ammonia decomposes according to the reaction
2 NH3(g) ⇌ N2(g) + 3 H2(g),
what is Kc for the reaction?
a. 0.16
b. 12.00
c. 1.44
d. 6.22
e. 0.75
The response is 12.00 (b). Using the equation Kc = [N2][H2]3/[NH3]2, we can find the equilibrium constant Kc for the reaction 2 NH3(g) N2(g) + 3 H2(g).
What is the equilibrium concentration ?In this instance, the capacity of the flask is 1 litre, and the equilibrium concentration of NH3 is 0.12 M. Therefore, using the reaction's stoichiometry, it is possible to determine the equilibrium concentrations of N2 and H2.
Since 2 moles of NH3 break down into 1 mole of N2 and 3 moles of H2, the equilibrium concentrations of N2 and H2 are 0.06 M and 0.18 M, respectively. As a result, the equilibrium constant Kc = [N2][H2]3/[NH3]2 = (0.06)(0.18)3/0.122 = 12.00 may be computed.
Therefore, b. 12.00 is the right response. You should be aware that the equilibrium constant Kc is a value that is temperature-dependent and is only applicable at the specified temperature. As a result, Kc will have a varied value depending on the temperature. The temperature in this instance is 850 K, and the Kc value is 12.00.
Learn more about equilibrium at:
https://brainly.com/question/30694482
#SPJ2
Which of the following does the atomic number of an atom represent? (1 point)
o the number of neutrons in the atom
O the number of particles outside the nucleus of the atom
O the number of protons in the atom
o the number of particles in the nucleus of the atom
Explanation:
the atomic number is the number of protons in the atom
Where did you put H an He? What are your reasoning for placement?
Answer:
On the placement of hydrogen and helium in the periodic system
H1=1
He2=2
How many square centimeters are in an area of 5.90 inch^2 ?
Answer:
38.0644 cm^2
Explanation:
5.90 ×6.451 cm^2If an inverse relationship exist between x and y, and k = 200, which of the following would be points on the graph?
-(200,0.1)
-(100, 0.2)
-(400, 0.5)
-(800, 0.4)
Answer:
The answer is (400, 0.5)
Which list only includes terms that describe oxygen gas, O2?
A. element, molecule, pure substance
B. atom, compound, molecule
C. atom, element, molecule
D. compound, molecule, pure substance
Answer:
d
Explanation:
it just makes alot of sense and you got this
Oxygen is a gas that belongs to the chalcogen family and is a reactive non-metal. It is an element, molecule, or pure substance. Thus, option A is correct.
What is a pure substance?A pure substance is defined as a substance that cannot be physically separated into its constituent particles. They are known to have a definite and constant chemical composition. It can be a molecule, element, or compound.
An element is atomic species that cannot be broken into simple sub-particles by chemical processes. On the other hand, if an atomic element bonds to the same or different atom it forms a molecule.
Oxygen gas is an element composed of two atoms of oxygen and is a molecule as the two atoms are linked chemically. It is also a pure substance as it contains the same element.
Therefore, option A. oxygen gas is a pure substance, an element, and a molecule.
Learn more about pure substance, here:
https://brainly.com/question/24462192
#SPJ2
If you wanted to increase the speed of
vaporization, you could
A. put the substance in the freezer.
B. place a lid on the substance.
C. heat the substance to the boiling point.
D. cool the substance to the freezing point.
>
Copyright © 2003 - 2021 Acellus Corporation. All Rights Reserved.
Answer:
C. heat the substance to the boiling point.
Answer:
heat the substance
Explanation:
A sealed reaction vessel initially contains 1.113×10-2 moles of water vapor and 1.490×10-2 moles of CO(g).
H20(g) +CO(g) <==> H2(g) + CO2(g)
After the above reaction has come to equilibrium, the vessel contains 8.326×10-3 moles of CO2(g).
What is the value of the equilibrium constant Kc of the reaction at the temperature of the vessel?
Answer:
Kc =[tex]\frac{[8.326x10-3]^{1} }{[1.113x10-2]^{1}[1.490x10-2]^{1} }[/tex]
Kc = 50.2059
Explanation:
1. Balance the equation
2. Use the Kc formula
Remember that pure substances, like H2 are not included on the Kc formula
The value of the equilibrium constant Kc of the reaction at the temperature of the vessel is 0.05.
Calculation,
The balanced chemical equation is given as,
[tex]2H_{2}O[/tex] + [tex]2CO[/tex] → [tex]2H_{2}[/tex] + [tex]2CO_{2}[/tex]
At t=0 1.113×[tex]10^{-2}[/tex] 1.490×[tex]10^{-2}[/tex] 0
At [tex]t=t_{eq}[/tex] 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] 1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] 8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]H_{2}O[/tex] at equilibrium = 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]CO[/tex] at equilibrium = 1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]CO_{2}[/tex] at equilibrium = 8.326×[tex]10^{-3}[/tex]
What is equilibrium constant?Equilibrium constant is calculated bt ratio of product of concentration of reactant by product.
K = [tex][H_{2}O]^{2}[/tex]×[tex][CO]^{2}[/tex]/[tex][CO_{2}]^{2}[/tex]
K =( 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] )∧2× (1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex])∧2/(8.326×[tex]10^{-3}[/tex])∧2
K = 0.049 ≈ 0.05
To learn more about equilibrium constant,
https://brainly.com/question/11420477
#SPJ2
what is the chemical formula of ( methane ) ??
[tex]\huge{ \color{violet}{ \boxed{ \color{hotpink}{Answer}}}}[/tex]
what is the chemical formula of ( methane ) ??
» CH4[tex] \: [/tex]
--⚘ Mishi ChaeYoon ⚘--Answer:
[tex]CH_4[/tex]
Explanation:
Methane is a chemical compound with the formula CH4. ( One atom of carbon and four atoms of hydrogen).
------------------------
OAmalOHopeO
------------------------
HELP PLEASE WILL MARK BRAINLIEST!!!!!!!
Answer:
Precise
Explanation:
hope it helps!!!!!!!!
How many elements have properties of both metals and non-metals?
Answer:
The elements boron, silicon, germanium, arsenic, antimony, and tellurium separate the metals from the nonmetals in the periodic table. These elements, called metalloids or sometimes semimetals, exhibit properties characteristic of both metals and nonmetals.
Elements: Oxygen
explain dehydrogenation
Answer:
Dehydrogenation is the process by which hydrogen is removed from an organic compound to form a new chemical (e.g., to convert saturated into unsaturated compounds).
What is the final temperature of water given an initial temperature of 28 ˚C, a mass of 7 g, and heat (q) of 184 J (Specific Heat of water = 4.184 )?
Answer:34.28 Degree celcius
Explanation:The heat given is equal to the change in temperature multiplied by the mass and the specific heat capacity
This gives the equation:Q=mc∆T
Where Q=184,m=7, specific heat capacity=4.184,∆T=X-28,
But ∆T=Final temperature (T'')-Initial temperature (T')
Therefore the equation becomes
184=7×4.184(X-28)
Solving the remaining linear equation gives you X as 34.28°C