Answer:
Yes
Explanation:
Yes, but almost insignificantly. The regular boiling point of water is 100 degrees celcius, adding a small handfull of salt will increase the boiling point to roughly 100.04 degrees celcius. Therefore, it is almost insignificant but still does affect it. This is mainly because salt changes the way the molecules react thus making it harder for them to change state from liquid to gas. This ultimately causes the water to get hotter before boiling actually occurs.
Why increasing the temperature of a gas would increase the volume of its container in gas law?
When the amount of gas in a container is increased, the volume increases. Lussac's law states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.
Please help .. I’m really stuck
Answer:
See explanation
Explanation:
pOH = -log[OH^-]
pOH =-log[1×10^-4 molL-1]
pOH = 4
pH +pOH =14
pH = 14 -4
pH =11
b) pOH = -log[OH^-]
pOH =-log[4.9×10^-2molL-1]
pOH = 1.31
pH +pOH =14
pH = 14 -1.31
pH =12.69
c)
pH= -log[H^+]
[H^+] = Antilog [-pH]
[H^+] = Antilog [-3]
[H^+] = 1 × 10^-3 molL-1
d) pOH = -log[OH^-]
[OH^-] = Antilog[-pOH]
[OH^-] = Antilog[-10.4]
[OH^-] = 3.98 ×10^-11
[OH^-] [H^+] = 1 × 10^-14
[H^+] = 1 × 10^-14/3.98 ×10^-11
[H^+] =2.5 ×10^-4 MolL^-1
e) A solution of pH 9 is basic because the pH scale is calibrated in such as way that 0-6.9 is acidic, 7 is neutral and 8 - 14 is basic.
f)
[H^+] = number of moles/volume
[H^+] = 0.35 moles/8L
[H^+] = 0.044 MolL^-1
pH = - log [H^+]
pH = -log [0.044 MolL^-1]
pH= 1.36
help bc i need it lol
Answer:
2 XE + 1 AB. --> 1 AE2 + 2 XB
Above equation is now balanced
The skin has and needs natural oils. Why is it advisable
to wear gloves while working with strong alkalis ?
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Explanation:
it from internet
This woman comes to the clinic with high blood pressure,
hyperglycemia(high blood sugar), weakening of the bones and severe
depression of the immune system. Can you diagnose her condition?
Aluminum reacts with oxygen to form aluminum oxide. Select the correct unbalanced skeleton equation for this reaction. A. Al(s) + 0(g) - AIO(s) B. Al203(s) - Al(s) + 02(8) C. Al(s) - 02(8) + Al203(s) D. Al(s) + 02(8) - Al203(s)
Answer:
D. Al(s) + O₂(g) → Al₂O₃(s)
Explanation:
Aluminum is a solid metal, so it is written as Al(s).
Oxygen is a diatomic gas, so we write this compound as O₂(g).
Aluminum oxide has the formula Al₂O₃ because in oxides the oxidation number of oxygen atom is -2 and for aluminum, the oxidation number is 3. Thus, we write this compound as Al₂O₃(s).
Now, we have to found the chemical equation in which the reactants (left side) are Al(s) and O₂(g) while the product (right side) is Al₂O₃(s). From the options, we can see that the correct is (D):
Al(s) + O₂(g) → Al₂O₃(s)
Is soup pure or impure?
Answer:
I think it's impure . Hope this helps you
Answer:
I think is pure but not 100% pure.
If I threw a block of sodium into a lake, and the H2 created took up 34 L of space at STP (standard temperature and pressure: 1 atm and 0C), how many grams of Na did I begin with?
Answer:
70g Na
Explanation:
The sodium reacts with water as follows:
2Na + 2H2O → 2NaOH + H2
Where 2 moles of Na produce 1 mole of H2.
To solve this question we must find the moles of H2. With the balanced equation we can find the moles of Na and its mass as follows:
Moles H2:
PV = nRT; n = PV/RT
Where P is pressure = 1atm,
V is volume = 34L,
R is gas constant = 0.082atmL/molK
T is absolute temperature = 273.15K = 0°C
Replacing:
n = 1atm*34L/0.082atmL/molK*273.15K
n = 1.52 moles H2
Moles Na:
1.52 moles H2 * (2mol Na / 1mol H2) = 3.04 moles Na
Mass Na-Molar mass: 22.99g/mol-
3.04 moles Na * (22.99g / mol) =
70g NaWhat has the most direct cause to the increase in the number and ferocity (strength) of storms hitting the Caribbean and the United States in recent years?
Answer:
High amount of humidity
Explanation:
This is especially common in the Caribbean, where hot temperatures very moisture and warm air provide near-ideal circumstances for hurricane formation, as assessed by the Saffir-Simpson classification and the Power Distribution Index.
"Hurricanes may originate everywhere in the Atlantic basin, from the subtropical central Atlantic to the Gulf coast. However, in order to make this all the way to the West Coast of the United States, the storms must pass over a lengthy length of sea water which is far too small to support hurricanes.
The storm strength is influenced by a lot of factors. Due to world warms and increase in the amount of humidity.
What is causing the increase in storm strength?
Studies has shown due too the warming of the world, hurricanes and other tropical cyclones are said to be more stronger.
This is due to the fact that warmer water gives more of the energy that boast storms. A rise in stronger hurricanes is due to warming never ending.
Learn more about storm strength from
https://brainly.com/question/25775340
Number of molecules in 16 grams of h2co3
For this one u can work out the amount of moles in h2co3 by using moles=mass/mr(of h2co3 is 52)
so 16/62=0.258moles then u use the equation
number of particle = moles × 6.02×10^23
=0.258×6.02 ×10^23
=1.55×10^23 molecules.
hope this helps
An unknown substance weighing 42.0 g was heated from 36.0°C to 65.0°C. In this process, the
substance absorbed 5895 J of energy. What is the specific heat of the substance?
A. 5895 J/(g*C)
B. 4.18 J/(g*C)
C. 4.84 J/( g*C)
D. O.06 J/(g*C)
Answer:
A. 5895 J/g*C)
Explanation:
An unknown substance weighing 42.0 g was heated from 36.0°C to 65.0°C. In this process, the substance absorbed 5895 J of energy.
When naming a molecule, how do you indicate that the carbons on either side
of the double bond are pointing in opposite directions?
Answer:
use the prefix trans-
When naming a molecule, we indicate that the carbons on either side of the double bond are pointing in opposite directions by adding a prefix (-trans) in the name of the molecule.
What is IUPAC nomenclature?IUPAC nomenclature of organic compounds refers to the systematic approach taken for the nomenclature of organic compounds as per the recommendation of the International Union of Pure and Applied Chemistry.
If alkenes have two different substituents at each end of the C=C then they can exist as stereoisomers (as geometric isomers).
This is because there is restricted rotation of the double bond due to the pi bond which means they don't readily interconvert.
cis- if the two alkyl groups, R-, are on the same side of the C=Ctrans- if the two alkyl groups, R-, are on opposite sides of the C=C.Therefore, When naming a molecule, we indicate that the carbons on either side of the double bond are pointing in opposite directions by adding a prefix (-trans) in the name of the molecule.
Learn more about IUPAC Nomenclature, here:
https://brainly.com/question/14379357
#SPJ2
Please help! I don't know how to do and want to understand
Explain why the buffering action of these chemical reactions is limited by the present day rate of change for atmospheric CO2 concentration
Answer:
Due to increase in carbondioxide gas.
Explanation:
The buffering action of these chemical reactions is limited by the present day rate of change for atmospheric carbondioxide concentration because the the rate of atmospheric carbondioxide rises as compared to ancient atmospheric carbondioxide gas. Due to increase of human activities, the concentration of carbondioxide gas increases in the atmosphere which limits the buffering action of these chemical reactions so we can say that carbondioxide gas is responsible for its limited action.
Which electron in an atom (Z=17) is the most shielded from
nuclear charge?
A. an electron in the 2s
B. an electron in the 3p
C. an electron in the 3d
D. an electron in the 1s
Answer:
option no. C is correct
an electron in the 3d
What makes up a compound
Answer:
Elements make up a compound.
Pure hydrogen (H₂) is a hazardous substance. Thus, safer and more cost effective techniques have been developed to store it as a solid for shipping purposes. One such method is the reaction below, which occurs at 200 °C.
Answer: hello your question has some missing details attached below is the missing details
answer : 25.5% ( B )
Explanation:
Determine percentage yield
molar mass = 35 g/mol
mass of Li₃N(s) = 70 g
product LiH(s) = 8.0 g ( actual yield )
theoretical yield ( LiH ) = 4 * 7.95 = 31.8 g
percentage yield = actual yield * 100 / theoretical yield
= 8 * 100/31.8
= 25.5%
Indica en qué modelos se fueron descubriendo las partículas atómicas y las unidades en la que se expresan su masa y su carga eléctrica
Answer:
En total son 8 modelos, en la explicación los nombraremos por orden de antigüedad.
Explanation:
Modelo atómico de Demócrito (450 a.C.)
Modelo atómico de Dalton (1803 d.C.)
Modelo atómico de Lewis (1902 d.C.)
Modelo atómico de Thomson (1904 d.C.)
Modelo atómico de Rutherford (1911 d.C.)
Modelo atómico de Bohr (1913 d.C.)
Modelo atómico de Sommerfeld (1916 d.C.)
Modelo atómico de Schrödinger (1926 d.C.)
Will give brainliest
Process name of water vapor to ice
Answer:
Deposition
this is the process of a substance changing its state from gas to solid. Solid to gas is known as sublimation
The molar mass of copper(II) chloride (CuCl2) is 134.45 g/mol. How many formula units of CuCl2 are present in 17.6 g of CuCl2?
Answer:
7
Explanation:
took test
In lab, you calculate the density of an iron rod to be 7.30 g/cm3. The accepted value
for the density of iron is 7.80 g/cm3. What is your percent error?
Answer:
6.41 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual density = 7.80 g/cm³
error = 7.30 - 7.80 = 0.5
We have
[tex]p(\%) = \frac{0.5}{7.8} \times 100 \\ = 6.410256...[/tex]
We have the final answer as
6.41 %Hope this helps you
The radius of the large cylinder of a hydrolic press
20cm and that of the small cylinderis 5 cm. If a force of 100N is applied on the small piston Calculate the force on the large piston. if the piston of the small cylinder move through a distance of 0.4m through what distance can the large piston be raised
Answer: 1) 400N
2)1.6
Explanation:
1) 5cm = 100N of force
so
20cm=400n
2) 0.4 X 4 = 1.6
What makes plants the beginning of the food chain?
please answer my question aswell as my last one!
Answer: A
Explanation:
i just took the quiz and it was right!
In the titration of a solution of Sodium hydroxide, an acid titrant was prepared by diluting 125.0 mL of 10.00 mol/L Nitric acid into enough distilled water to make 500.0 mL of solution. 30.0 mL of the base was measured, and in the titration, 16.74 mL of the acid titrant was needed to neutralize. Determine the concentration of the Sodium hydroxide.
Answer:
1.395M NaOH
Explanation:
Sodium hydroxide, NaOH, reacts with nitric acid, HNO3, as follows:
NaOH + HNO3 → NaNO3 + H2O
Where 1mol of NaOH reacts with 1mol of HNO3
To solve this question we must find the concentration of the titrant. With the concentration and the needed acid we can find the moles of HNO3 added = moles NaOH in the solution. With the moles of NaOH and its volume we can find its concentration as follows:
HNO3 concentration:
10.00mol/L HNO3 * (125.0mL/500.0mL) = 2.500M HNO3
Moles HNO3 = Moles NaOH:
16.74mL = 0.01674L*(2.500mol/L) = 0.04185 moles HNO3 = Moles NaOH
Concentration NaOH:
0.04185 moles / 0.0300L =
1.395M NaOH
In its aqueous solution, 32% of a substance dissociates to release hydroxide ions. Which of the following is true for the substance? (3 points)
It is a weak acid
It is a weak base.
It is a strong acid
It is a strong base.
*please only answer is you have the real answer bc I really need to bring up my grade*
Answer:
It is a weak base.
Explanation:
A base is a substance that releases hydroxide ion (OH-) when in an aqueous solution, according to Svante Arrhenius definition of a base. However, a base is said to be either strong or weak depending on it is able to dissociate.
A weak base is a base that does not completely dissociate into hydroxide ions in an aqueous solution while a strong base dissociates completely. According to this question, 32% of a basic substance ( because it can dissociate into OH-) dissociates to release hydroxide ions. This means that since it does not totally dissociate i.e. 100%, it is a WEAK BASE.
Answer:
It is a weak base.
Explanation:
Guy above me is right and I took the test :)
An inverse relationship can be represented by what?
Answer:
1/....
Explanation:
If we say acceleration 'a' is inversely proportional to mass 'm', then
a=1/m.
Please answer. Brainliest!
The equation is balanced.
Explanation:The number of P atoms in the reactant side is 4 and the number of P atoms in the product side is also 4.
The number of O atoms in the reactant side is 16 and the number of O atoms in the product side is also 16.
The number of H atoms in the reactant side is 12 and the number of H atoms in the product side is also 12.
These results are in accordance with the law of conservation of mass.
#ILoveChemistry
what do u mean by change in state of matter?define it.
Answer:
The mode of changing from one state of matter into another state and back to the former or original state is called change in state of matter .
hope it is helpful to you
Answer:
change in one state from another and back in its own original is known as change in state of matter
125 cm3 of a solution contains 0.25 moles of the solute. What is the concentration of the solution?
Answer:
Explanation:
125 cm3 -> 0.125 L
M = no. mole / volume (L)
M = 0.25 / 0.125 = 2 M
Which of these takes place when a chemical change occurs? option 1: Bonds connecting atoms in products and reactants form. option 2: Bonds connecting atoms in products and reactants break. option 3: Bonds connecting atoms in reactants break, and bonds connecting atoms in products form. option 4: Bonds connecting atoms in reactants form, and bonds connecting atoms in products break.
Answer: Out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explanation:
A change that leads to the change in chemical composition of a substance is called a chemical change.
For example, [tex]2NH_{3} \rightarrow N_{2} + 3H_{2}[/tex]
Here, bond between the reactant atoms nitrogen and hydrogen is broken down.
On the other hand, bond connecting the products that is [tex]N_{2}[/tex] and [tex]H_{2}[/tex] is formed.
Thus,, we can conclude that out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
