The most likely composition of the associated magma is A. felsic to intermediate.
What is magma?Magma is molten rock that is found beneath the Earth's surface. It is composed of several different minerals and materials and is formed when the hot rock found within the Earth's mantle rises and melts. Magma is a liquid mass of molten rock that is made up of intense heat and pressure. Magma is found in the lower parts of the Earth's crust, and it can sometimes reach the surface of the Earth, resulting in volcanic eruptions. The temperature of magma can range from 700°C to 1300°C.
Mount St. Helens experienced a Plinian eruption in 1980, which is typical of magmas with a felsic to intermediate composition. The presence of a lava dome is a sign that the magma is still relatively hot and therefore still has some gas, which is also consistent with a felsic to intermediate composition. Mafic, ultramafic, and other magma compositions do not typically produce Plinian eruptions.
To learn more about magma
https://brainly.com/question/23661578
#SPJ1
In traveling to the Moon, astronauts aboard the Apollo spacecraft put themselves into a slow rotation to distribute the Sun's energy evenly. At the start of their trip, they accelerated from no rotation to 1 revolution per minute during a 12-min time interval. We can approximate the spacecraft as a cylinder with a mass of 50 metric tons and a diameter of 8.5 m. Calculate the angular acceleration, the torque needed to produce such an acceleration, and the magnitude of the linear acceleration of a point on the skin of the ship 5 min after it started accelerating.
the angular acceleration is α = 0.1047 rad/s².
the torque is τ = 22.837kNm.
The angular acceleration α is given by the equation: α = (2πf)/T, where f is the final angular velocity (in revolutions per minute, rpm) and T is the time interval in which the acceleration occurs. In this case, the final angular velocity is 1 rpm, and the time interval is 12 minutes, so the angular acceleration is
α = (2π(1rpm))/12min
= 0.1047 rad/s².
The torque required to produce such an acceleration can be found using the equation τ = Iα, where I is the moment of inertia and α is the angular acceleration. Since the spacecraft is approximated as a cylinder, the moment of inertia is given by the equation I = (1/2)mr², where m is the mass and r is the radius. Therefore,
I = (1/2)(50mt)((8.5m)/2)²
= 218.75m⁴,
and the torque is
τ = (218.75m⁴)(0.1047rad/s²)
= 22.837kNm.
The magnitude of the linear acceleration a of a point on the skin of the ship 5 minutes after it started accelerating is given by the equation a = αr, where α is the angular acceleration and r is the radius of the ship. Therefore,
a = (0.1047rad/s²)(8.5m)
= 0.89 m/s².
TO KNOW ABOUT angular acceleration :
https://brainly.com/question/408236
#SPJ11
in 2000, a population of a city is 1,000,000 people. If it has a doubling time of 25 years, when will its population reach 2,000,000
If the city's population has a doubling time of 25 years, it means that it will take 25 years for the population to double. To calculate the annual growth rate, we can use the rule of 70, which states that to find the number of years it takes for a quantity to double, we can divide 70 by the annual growth rate.
So, to find the annual growth rate, we can use the formula: Annual growth rate = 70 / doubling time Annual growth rate [tex]= 70 / 25 = 2.8%[/tex] Now, to find when the population of the city will reach 2,000,000, we can use the formula for exponential growth:[tex]Nt = N0 x (1 + r)^t[/tex] where Nt is the future population, N0 is the initial population, r is the annual growth rate, and t is the time period.We know that [tex]N0 = 1,000,000, Nt = 2,000,000, and r = 2.8%[/tex].[tex]2,000,000 = 1,000,000 x (1 + 0.028)^t[/tex] Taking the natural logarithm of both sides, we get: [tex]ln(2) = t x ln(1.028)[/tex] Solving for t, we get: [tex]t = ln(2) / ln(1.028) = 25.7[/tex] years the city's population will reach 2,000,000 in approximately 26 years, or in the year 2026.
To learn more about annual click the link below:
brainly.com/question/28541432
#SPJ1
Which man-made feature has allowed for the shipment of goods and resources more effectively from the Middle East to Europe?
Panama Canal
Mediterranean Sea
Suez Canal
Nile River
Suez Canal is the man-made feature has allowed for the shipment of goods and resources more effectively from the Middle East to Europe therefore the correct option is c.
The Suez Canal is an artificial ocean- position raceway connecting the Mediterranean Sea to the Red Sea. It's one of the world’s most strategically important aqueducts, furnishing a pivotal trade route between Europe, Asia, and Africa. Construction of the conduit began in 1859 under the supervision of French mastermind
Ferdinand de Lesseps. It took 10 times to complete, with the sanctioned opening taking place in November 1869.
Hence the correct option is c.
To know more about Suez Canal visit:
https://brainly.com/question/29760169
#SPJ4
the spacecraft that visited pluto and sent back our first images: show answer incorrect answer please select the best choice from the available options. was called new horizons got a gravity boost from jupiter to get it to pluto faster used plutonium to keep it warm is returning to earth in the 22nd century more than one of these
The spacecraft that visited Pluto and sent back our first images was called New Horizons. It was launched in 2006 and completed its mission in 2015. It was the first mission to explore the dwarf planet, and it provided humanity with a wealth of knowledge about it.
New Horizons received a gravity boost from Jupiter to get it to Pluto faster and used plutonium to keep it warm. The craft also sent back amazing pictures of Pluto and its moons, and the data it collected is helping scientists learn more about the dwarf planet.
The spacecraft is now heading back to Earth, and it is expected to reach its destination in the 22nd century. The data from New Horizons is providing us with a better understanding of the mysterious outer reaches of our solar system.
Know more about spacecraft here
https://brainly.com/question/13478702#
#SPJ11
Simple-exponential smoothing forecasting models are useful for data which have All of the options are correct. pronounced seasonality. a downward time trend. neither an upward or downward time trend. an upward time trend.
Simple-exponential smoothing forecasting models are useful for data which have C. neither an upward or downward time trend.
When should simple exponential smoothing forecasting be used ?Simple-exponential smoothing forecasting models are a type of time series forecasting technique that uses weighted averages of past observations to predict future values.
These models are best suited for data that does not exhibit a clear trend, either upward or downward. When data have a pronounced seasonality or trend, more advanced time series models may be necessary to make accurate forecasts.
Find out more on exponential smoothing forecasting at https://brainly.com/question/15281054
#SPJ1
what causes the east polar winds to be generated, which drive surface currents such as the east green land current
The east polar winds are generated by a combination of factors such as the rotation of the Earth, differences in temperature and pressure, and the Coriolis effect. These winds drive surface currents such as the East Greenland Current.
What causes the East Polar winds to be generated, which drive surface currents such as the East Greenland Current?The East Greenland Current is a cold ocean current that flows from the Arctic Ocean's polar region to the Atlantic Ocean's southern region. The East Greenland Current is driven by the East Polar winds, which are generated by a combination of factors such as the rotation of the Earth, differences in temperature and pressure, and the Coriolis effect.
The rotation of the Earth causes winds to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere, thanks to the Coriolis effect. The difference in temperature and pressure between the polar region and the lower latitudes produces a pressure gradient that causes air to flow from high to low pressure regions.
These pressure gradients, combined with the Coriolis effect, result in strong and steady East Polar winds. The East Polar winds, in turn, generate the East Greenland Current.
Learn more about Greenland at
https://brainly.com/question/2187881
#SPJ11
Which is NOT true of the Anthropocene
A. Describes a period in Earths's history when forces of human activity have begun to exceed those of wild nature
B. It is the term in Anthropology referring to the first humans to walk on land
C. Is evidenced by the effects of plowing, tilling, littering, and disturbing soils across the surface of the Earth
D. Is expected to extend long into the future
Option B. It is the term in Anthropology referring to the first humans to walk on land is NOT true of the Anthropocene.
What is Anthropocene?
The term Anthropocene is used to refer to the current geological epoch, characterized by the significant impact of human activity on the Earth's ecosystems and geology. It is thought that human activity has been so extensive and profound that it is changing the planet's natural systems permanently.
The word "Anthropocene" is derived from the Greek word for "human" and "new."
Option A: Describes a period in Earths's history when forces of human activity have begun to exceed those of wild nature is true of the Anthropocene.
Option B: It is the term in Anthropology referring to the first humans to walk on land is NOT true of the Anthropocene.
Option C: Is evidenced by the effects of plowing, tilling, littering, and disturbing soils across the surface of the Earth is true of the Anthropocene.
Option D: Is expected to extend long into the future is true of the Anthropocene.
To know more about Anthropocene refer here :https://brainly.com/question/16550690#
#SPJ11
Identify from the following list possible environments or conditions that can lead to the formation of clay or silt deposits- chemical weathering of soils- windblown material generated by glaciers- floodplains of river systems- bottoms of lakes- wave action along a beach
Clay or silt deposits can be formed in different environments or conditions. These include floodplains of river systems, bottoms of lakes, wave action along a beach, chemical weathering of soils, and windblown material generated by glaciers.
The floodplains of river systems are environments where clay or silt deposits can form. River floods can carry a significant amount of silt and clay materials, and when the water slows down, these materials can settle and form deposits. This process can occur repeatedly over time, resulting in the accumulation of thick clay or silt layers.
Silt and clay deposits can also form in the bottoms of lakes. The deposition of silt and clay materials in lakes is usually influenced by the volume and velocity of water entering the lake and the nature of the lake basin. When silt and clay materials settle to the bottom of the lake, they can form thick layers over time.
The wave action along a beach can lead to the formation of clay and silt deposits. Wave action can move sediments along the shore and carry them offshore. When the waves slow down, the sediments can settle and form deposits.
Clay and silt deposits can also form due to the chemical weathering of soils. When minerals in the soil are exposed to water and oxygen, they can undergo chemical reactions that transform them into clay and silt materials.
The movement of glaciers can create windblown materials that can form clay or silt deposits. When glaciers move, they can grind rocks into fine-grained sediments. These sediments can be transported by wind and deposited in different environments to form clay and silt deposits.
Learn more about silt deposits at https://brainly.com/question/8395011
#SPJ11
Examine the flutes/flute casts on the sample (i.e., rotate and zoom in on the 3-D sample). Based on your observations of the flute geometries and knowing how these flute casts form, label the sample with the correct flow direction and top/bottom interpretation. (A) Upstream / Bed Top Upstream / Bed Bottom Downstream / Bed Top Downstream / Bed Bottom
The preserved remains of water running over and eroding sediments are known as flute casts, also known as sole marks.
What does softer sediment do?Softer sediment must cover the exposed surface and fill in the structures that the water has eroded in order to be preserved. A small dip is swept by the water, with a sharp angle on the upstream side and a lower angle on the downstream side.
Turbidity currents are the most prevalent geologic phenomenon that cause flute castings (underwater sediment slides).
Based on the observation of the flute geometries, the correct flow direction and top/bottom interpretation is done below.
By examining the flutes/flute casts geometries on the sample, the current direction is marked on the sample below. (see image)
Read more about flute geometries here:
https://brainly.com/question/27883896
#SPJ1
which of the following plots most accurately shows the temperature distribution in the solar system at the time of planet formation?graphs: A. steadily increasing line. B. steadily decreasing line. C. straight line. D. increasing
The steadily decreasing line most accurately shows the temperature distribution in the solar system at the time of planet formation. The correct option is B.
The temperature distribution in the solar system at the time of planet formation is best represented by the steadily decreasing line.
The steadily decreasing line accurately shows the temperature distribution in the solar system at the time of planet formation, where the temperature was steadily decreasing.
The temperature in the solar system, at the time of planet formation, was steadily decreasing due to the absence of the sun.
The Sun, which is the primary source of heat in the solar system, had not yet formed, and the temperature was cold.
The temperatures in the solar system were very low, and dust and gas were slowly cooling. It was at this time that the dust and gas began to collapse into clumps, which later led to the formation of planets.
The steadily decreasing line represents the temperature distribution of the solar system at the time of planet formation.
TO KNOW ABOUT planet formation:
https://brainly.com/question/29413773
#SPJ11
which new york state location has surface bedrock that has been subjected to very intense regional metamorphism
The location in New York State that has surface bedrock that has been subjected to very intense regional metamorphism is the Adirondack Mountains.
The Adirondack Mountains are located in the northeastern part of the state and cover an area of approximately 6.1 million acres. The Adirondack Mountains have a complex geology with many different types of metamorphic rocks, such as gneiss, schist, and marble.
The region has been subjected to intense regional metamorphism due to the effects of both folding and faulting. This has resulted in the rocks being folded, faulted, and sheared, which has increased their strength and altered their mineral composition.
The Adirondack Mountains are a prime example of how regional metamorphism can change the shape and composition of rocks over time. The intense regional metamorphism in the Adirondack Mountains has also created a unique landscape, with its high mountains, deep valleys, and many different types of rock formations.
This landscape makes it an excellent spot for outdoor recreation and is home to many parks and protected areas.
To know more metamorphism here
https://brainly.com/question/1366827
#SPJ11
identify the conditions that are likely to help preserve animal remains, making it more likely for them to become fossils.
Answer:
The following conditions are likely to help preserve animal remains, making it more likely for them to become fossils:
Rapid burial: When an animal dies, it is important that its body is quickly buried by sediment or other materials, which can protect it from scavengers, decay, and weathering.
Low oxygen environments: In low oxygen environments, such as swamps, bogs, or deep ocean sediments, decomposition slows down, which can help preserve the animal's remains.
Hard parts: Animals with hard parts, such as bones, teeth, or shells, are more likely to be preserved as fossils than those with soft tissue because hard parts are more resistant to decay and can survive burial and fossilization processes.
Lack of disturbance: If an animal's remains are not disturbed or moved after burial, they are more likely to remain intact and undergo fossilization.
Mineral-rich water: When mineral-rich water percolates through buried remains, it can replace the organic material with minerals, preserving the structure of the original organism and creating a fossil.
It is important to note that the likelihood of an animal becoming a fossil depends on a combination of factors, and even under ideal conditions, fossilization is still a rare event.
Explanation:
according to the multiple nuclei model, an airport is likely to attract nearbyhotels and warehousesretail and wholesale shopsresidences and highwaysuniversities and colleges
According to the multiple nuclei model, an airport is likely to attract nearby residences and highways.
Multiple Nuclei Model, created by C.D. Harris and E.L. Ullman, is a geographic theory that acknowledges the presence of numerous nodes in a city, each having its own unique features.
Each node serves as the nucleus of the city's growth and development. Multiple nuclei model According to the multiple nuclei model, an airport is likely to attract nearby residences and highways, as it is a significant component of the city's economic development.
Since the airport is critical for business growth and creates job opportunities, people prefer to settle near the airport. This leads to the construction of new residential areas and highways near the airport, which facilitates travel to and from the airport.
For such more question on nuclei model:
https://brainly.com/question/30870804
#SPJ11
Maine, Nevada, and North Dakota do not have large populations. What are some reasons for such small populations
Answer:
Explanation:
I have been to Maine several times. There are two issues about living there.They have hard winters, most of the time. Do not live there if you cannot deal with a long, hard winter. Its good if you can stay inside and write, like Stephen King.
another thing is job diversity because they rely on Lumber, fishing and other natural resources
Fill in the table with the terms that best describe these landforms plains and Plateaus
Plateaus and Plains are the two landforms, Low-lying, level terrain is known as a plain. A plateau is a level area that is significantly elevated above the surrounding terrain.
Many different landforms can be produced by endogenic and exogenic forces. A landform is an element of the Earth's solid surface that occurs naturally. Mountains, plateaus, and plains are a few examples.
PlateausAn elevated area with mostly level land on top is referred to as a plateau. It has a sizable top area and a steep incline on its sides. They are also referred to as tablelands or high plains. About 18% of the earth's land surface is made up of plateaus.
PlainsThe most significant landforms on the surface of the earth are plains. The definition of a plain is simply a low-lying, comparatively flat land surface with a very gentle slope and little local relief. The plains cover roughly 55% of the earth's land area. Most of the plain have been formed by deposition of sediments brought down by rivers. Besides rivers, some plains have also been formed by the action of the wind, moving ice and other tectonic activities.
Learn more about Plateaus at:
brainly.com/question/14745523
#SPJ4
Volcanic activity created the _____ that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland. fishing port.
Volcanic activity created the fishing port that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland. This statement is factual and relevant to the given question.
Volcanic activity refers to the processes and phenomena involved in the eruption of magma, ash, gas, and other volcanic materials from the earth's surface. The volcanic activity is often accompanied by a range of environmental impacts such as air pollution, climate change, landslides, and the formation of new landforms, among others.
In the case of the village of Vestmannaeyjar on the island of Heimaey, near Iceland, volcanic activity played a significant role in creating the fishing port that is important to the economy of the village. The eruption of Eldfell in 1973, which lasted for about five months, resulted in the formation of a new landmass and created a natural harbor that became the new fishing port of the village.
The fishing industry is the backbone of the economy of Vestmannaeyjar, with its major focus being on the harvesting of fish such as cod, haddock, and mackerel. Therefore, the volcanic activity that created the fishing port played a significant role in shaping the economy and social life of the village.
To know more about volcanic activities refer here :https://brainly.com/question/10564401#
#SPJ11
a set of physical conditions of the lower atmosphere, ... wind speed, cloud cover, and other factors, in a given area over a period of hours or days.
Answer:
b
Explanation:
What kind of land uses you might see along a river bank?
I have a test tomorrow, please help.
Along a river bank, several land uses, including residential, commercial, recreational, industrial, agricultural, and conservation, can be seen.
What is located beside a riverbank?Fish, aquatic life and plants, macroinvertebrates (such as mussels and insect larvae), and microorganisms like bacteria or algae are some of the biological elements that make up a river ecosystem.
What is the name of the area around a river?Dictionary of Entry Words. An region of land near to a river or stream that is typically flat is called a floodplain (or floodplain). It extends from the river's banks to the valley's outer reaches. A floodplain is divided into two sections. The first is the floodway, which is the river's main channel.
To know more about river bank visit:-
https://brainly.com/question/28091584
#SPJ1
21) Which of the following is evidence for supermassive black holes in active galaxies? A) the discovery of powerful jets coming from a compact core.
According to the given question, the evidence for supermassive black holes in active galaxies is the discovery of powerful jets coming from a compact core. This means option A is the correct answer.
What is a supermassive black hole?A supermassive black hole (SMBH) is a type of black hole with a mass ranging from millions to billions of times that of the Sun. These enormous black holes are found at the centers of most galaxies, including our own Milky Way.
They can be observed indirectly by their gravitational influence on surrounding stars, gas, and dust.Theoretical models suggest that active galactic nuclei (AGNs) are powered by supermassive black holes, which release energy by accretion.
These supermassive black holes' gravitational fields are so strong that they can absorb entire stars and gas clouds, creating powerful jets that emit X-rays, gamma rays, and radio waves.In active galaxies.
Your question is incomplete but most probably your full question was:
Which of the following is evidence for supermassive black holes in active galaxies? A) the discovery of powerful jets coming from a compact core
B) rapid changes in the luminosity of the galaxy nucleus
C) quasars emit approximately equal power at all wavelengths from infrared to gamma rays
D) very high speed orbital motions around galactic nuclei
E) all of the above
Learn more about SMBH at
https://brainly.com/question/29995196
#SPJ11
a pyroclastic flow blank . multiple select question. is rarely responsible for volcano-related deaths can move at speeds that exceed 100 m/sec is a mixture of magma, volcanic ash and gas, and air forms when airborne pyroclasts of various sizes begin to rain down upon the ground can reach temperatures of 350o c
A pyroclastic flow is a volcanic ash and gas. the correct answer is: B
A pyroclastic flow can move at speeds that exceed 100 m/sec, is a mixture of magma, volcanic ash and gas, and air, forms when airborne pyroclasts of various sizes begin to rain down upon the ground, and can reach temperatures of 350°C.
However, it is not true that it is rarely responsible for volcano-related deaths.
This statement is incorrect.
What is a pyroclastic flow?A pyroclastic flow is a volcanic event that produces a dense, dangerous cloud of ash, lava blocks, and gas that flows swiftly down the slope of a volcano.
Pyroclastic flows are most commonly associated with volcanic eruptions and can cause a lot of damage and death.
As previously stated, a pyroclastic flow is a mixture of magma, volcanic ash and gas, and air, and it can reach temperatures of 350°C.
The statements which are true regarding the pyroclastic flow are:
It can move at speeds that exceed 100 m/secIt is a mixture of magma, volcanic ash and gas, and air forms when airborne pyroclasts of various sizes begin to rain down upon the ground and can reach temperatures of 350°C. Therefore, the correct answer is B.
It can move at speeds that exceed 100 m/sec, is a mixture of magma, volcanic ash and gas, and air, forms when airborne pyroclasts of various sizes begin to rain down upon the ground, and can reach temperatures of 350°C.
TO KNOW ABOUT pyroclastic flow :
https://brainly.com/question/31460982#
#SPJ11
which of the following statements about the first stars that were born in the universe is expected to be true?
The first stars that were born in the universe were likely much more massive than stars born today.
These massive stars are thought to have contained more than 100 times the mass of our Sun, and it is likely that some were as massive as 500 times the mass of our Sun.
This mass is so great that it produces much higher temperatures and pressures than stars today, leading to different types of fusion reactions that are not seen in stars today.
These massive stars also had much shorter lifespans, lasting only a few million years, compared to stars like our Sun, which last billions of years.
The first stars also had very different compositions than stars today, being composed of only the lightest elements, hydrogen and helium, with no metals present.
This is due to the fact that heavier elements had not yet been produced in the early universe.
Due to their extreme masses and short lifespans, these first stars had much more powerful and energetic deaths, producing vast amounts of heavy elements through fusion and nucleosynthesis, which were then expelled into the universe.
This resulted in the universe becoming more enriched with metals, allowing for the formation of smaller, more stable stars with longer lifespans.
To know more about Stars here
https://brainly.com/question/7379319
#SPJ11
examine the images of the grand canyon below. notice that most of the canyon consists of layers of sedimentary rocks, but if you were to hike down into the inner gorge you would encounter the vishnu schist, a metamorphic rock. which of the following processes were involved as the vishnu schist metamorphosed? photograph a shows the grand canyon the inner gorge of the grand canyon, a steep gorge in the deepest part of the canyon with a river at its bottom. photograph b shows the vishnu schist, a dark colored rock outcrop jutting out from one side of the inner gorge. view available hint(s)for part a examine the images of the grand canyon below. notice that most of the canyon consists of layers of sedimentary rocks, but if you were to hike down into the inner gorge you would encounter the vishnu schist, a metamorphic rock. which of the following processes were involved as the vishnu schist metamorphosed? photograph a shows the grand canyon the inner gorge of the grand canyon, a steep gorge in the deepest part of the canyon with a river at its bottom. photograph b shows the vishnu schist, a dark colored rock outcrop jutting out from one side of the inner gorge. eruption and cooling of a lava flow. intense pressure due to regional metamorphism. deposition, burial, compaction, and cementation of sediment. cooling of magma.
The following processes were involved as the vishnu schist metamorphosed photograph b shows the vishnu schist, a dark colored rock outcrop jutting out from one side of the inner gorge eruption and cooling of a lava flow.
The Vishnu Schist found in the inner gorge of the Grand Canyon was formed through intense pressure due to regional metamorphism. This is different from the sedimentary rocks found in the rest of the canyon, which are formed through deposition, burial, compaction, and cementation of sediment. Eruption and cooling of a lava flow and cooling of magma are not processes that were involved in the metamorphosis of the Vishnu Schist.
Learn more about the Vishnu Schist: brainly.com/question/17153286
#SPJ11
what geologic event is responsible for creating the gold that made prospectors rush to california in the late 1840s?
The gold rush that brought prospectors to California in the late 1840s was due to a geologic event known as the California Gold Rush. This event was caused by gold deposits that were discovered in the Sierra Nevada Mountains.
These deposits were created millions of years ago when the Sierra Nevada Mountains were formed by the movement of tectonic plates. As these plates moved, they created cracks and crevices in the earth's crust. Over time, the gold deposits were pushed upwards and became exposed to the surface.
As news of these gold deposits spread, prospectors rushed to California in the hopes of striking it rich. The California Gold Rush changed the course of history, bringing an influx of people to the region and transforming the state into the bustling economy it is today.
Know more about geologic here
https://brainly.com/question/5634603#
#SPJ11
what volcanic eruption was the loudest in modern history?
Answer:
Explanation:
The loudest volcanic eruption in modern history was the 1883 eruption of the Krakatoa volcano, which is located between the islands of Java and Sumatra in Indonesia. The explosion was so powerful that it was heard over 3,000 miles away, and it produced a sound that is estimated to have reached 172 decibels at a distance of 100 miles from the source. The eruption caused widespread damage and loss of life, with tsunamis and other effects felt across the region.
sort each statement below into the appropriate bin based on whether it is something that scientists knew about pluto or its moon charon before the new horizons flyby, is something learned as a result of the new horizons flyby, or is something that seems possible from the new horizons mission but for which we'll need additional data to establish it with certainty.
Pluto and Charon are tidally locked: This is something that scientists knew about Pluto and its moon Charon before the New Horizons flyby. Tidal locking occurs when an object's orbital period is the same as its rotational period, meaning that the same side of the object is always facing the other.
In this case, the same sides of Pluto and Charon are always facing each other as they orbit one another. The likelihood of this happening was predicted before the mission based on the distance between Pluto and Charon and the gravitational forces between them, and the New Horizons flyby confirmed this to be the case.
Charon has a tenuous atmosphere: This is something that was learned as a result of the New Horizons flyby. Before the mission, scientists suspected that Charon may have an atmosphere, but data from New Horizons showed that the atmosphere is much more substantial than expected.
The flyby revealed that the atmosphere is composed mostly of nitrogen and methane, and is about 100,000 times thinner than Earth's atmosphere. Additional data is needed to establish the atmosphere's exact composition and other details.
Know more about Charon here
https://brainly.com/question/29931155#
#SPJ11
Continental Crust is generally _____ than Oceanic Crust.a. olderb. denserc. thinnerd. richer in iron and magnesiume. all of the above
could some layer of sediment lie beneath a layer of bedrock?
Answer:
Explanation:
No, it is highly unlikely for a layer of sediment to lie beneath a layer of bedrock. Bedrock is formed by the solidification of rock material over a long period of time, usually through the process of cooling and crystallization of magma or the compaction and cementation of sedimentary particles. It is the solid and relatively stable foundation of the Earth's crust and is typically composed of hard, dense rocks such as granite, basalt, or sandstone.
In contrast, sediment is unconsolidated material such as sand, silt, and clay that has been deposited by water, wind, or glaciers. Sediment layers are generally found on top of bedrock and can accumulate over time, but they cannot form beneath it.
However, there are some rare cases where sediment may be found beneath the bedrock. For example, if a layer of sediment is deposited on top of a bedrock layer and then covered by another layer of bedrock through the process of tectonic uplift or erosion, it is possible for the sediment layer to be preserved beneath the new bedrock layer. This is a rare occurrence and requires very specific geological conditions to happen.
After graduating, you and two of your classmates decide to embark on a sailing voyage. Being novices at long-distance sailing, you and your friends decide to tackle something that appears relatively simple. You decide that a round-trip across the Atlantic, starting in North America, would NOT be a bad idea. You decide to leave from North Carolina, where the old boat you bought is located, and travel across to England, then south from there all the way down to Morocco, then back across the Atlantic. You also decide to prepare by digging up your old ISP 203a notes and a map of ocean currents to help you out....1. How do you plan your route there and back, so that the prevailing ocean currents provide the most help? Which currents are these? Draw them and label them on the map on the last page of this handout.2. You know that currents are driven by winds. What are the two major winds that drive the currents you will use in part 1?Getting across to England is a breeze – you can’t believe how easy the trip was, and how quickly it all went by. Now you are ready to head back. You know the trip home will take longer...You are back at sea, just entering the warmer climates to the south, when disaster strikes. Off the CanaryIslands (on your map), your boat capsizes in a storm. Before she sinks, you have just enough time to grab the emergency kit and jump into the inflatable lifeboat. Whew! But...now what??? The current is flowing westward; try as you might, you can’t make the boat go east as you have no sail. So, you’re off across the Atlantic again, although not exactly as you’d planned. This WILL be educational!
The currents you will use are the Gulf Stream, the North Atlantic Drift, the Canary Current, and the North Equatorial Current. The two major winds that drive the currents you will use are west wind and east wind.
To plan your route there and back, you should take advantage of the prevailing ocean currents. The Gulf Stream is a warm and swift ocean current that moves from the Gulf of Mexico, up along the east coast of North America and across the Atlantic towards Europe.
The North Atlantic Drift is an ocean current that moves in the opposite direction of the Gulf Stream and is a weaker current. The Canary Current is a cool and weak ocean current that flows southwards from the west coast of Europe to northwest Africa. Finally, the North Equatorial Current is a warm ocean current that moves westwards across the Atlantic.
The two major winds that drive the currents you will use are the prevailing westerlies, which move from west to east, and the northeast trades, which move from northeast to southwest.
In your situation, the current is flowing westward and you can't make the boat go east as you have no sail. To get back to North Carolina, you should use the Gulf Stream to your advantage and move south-eastward along the edge of the Gulf Stream towards the North Atlantic Drift. From there, you can use the North Atlantic Drift to get across the Atlantic and back to North Carolina.
Learn more about The Gulf Stream: brainly.com/question/21478079
#SPJ11
on the 21st of december which hemisphere has no sunrise between 66.5 degrees of latitude and the pole?
It would take place in the Northern hemisphere.
where is the kamchatka peninsula, home to 29 active volcanoes?
Answer:
Explanation:
The Kamchatka Peninsula is located in the far eastern part of Russia, in the Russian Far East. It is situated between the Sea of Okhotsk to the west and the Pacific Ocean to the east. The Kamchatka Peninsula is known for its stunning natural beauty, abundant wildlife, and numerous active volcanoes, with a total of 29 active volcanoes located on the peninsula.
