HELP ME ASAP PLEASE!!!!!!!!!

Answer:

Step-by-step explanation:

Since they are traveling in the same direction, the distance between them increases at a rate of the difference of their speeds.

The relative speed of train A with respect to train B is:

105 kmph - 87 kmph = 18 kmph

In three hours, the distance between them will be:

Distance = Speed x Time

Distance = 18 kmph x 3 hours

Distance = 54 km

Therefore, the two trains will be 54 kilometers apart after three hours.

Answer:

888.4 mL.

Step-by-step explanation:

To solve this problem, we can use the following formula:

Amount of drug (in mg) = concentration (in mg/mL) × volume (in mL)

We are given the concentration of the drug as 5.315 mg per 3.743 mL. To find the volume of the drug needed to give 4.719 g, we need to rearrange the formula to solve for volume:

Volume (in mL) = amount of drug (in mg) ÷ concentration (in mg/mL)

First, we need to convert 4.719 g to mg by multiplying by 1000:

4.719 g × 1000 mg/g = 4719 mg

Now we can substitute the given concentration and the calculated amount of drug into the formula and solve for volume:

Volume (in mL) = 4719 mg ÷ 5.315 mg/mL

Volume (in mL) ≈ 888.5 mL

Therefore, approximately 888.5 mL of the drug are needed to give 4.719 g. Rounded to 1 decimal, the answer is 888.4 mL.

FALSE. Every random sample of the same size from a given population will not produce exactly the same confidence interval for μ.

The confidence interval is a statistical measure used to estimate the range of values within which a population parameter is likely to fall. The confidence interval is calculated based on the sample mean and standard deviation, as well as the level of confidence desired.

Suppose we take a random sample of size n from a population, and calculate the confidence interval for the population mean using this sample. The sample mean and the sample standard deviation will be used to estimate the true population mean and the population standard deviation, respectively. However, as the sample is random, each sample—despite being drawn from the same population—will have different values for the sample mean and standard deviation. Thus, different samples will produce different confidence intervals for the population mean.

Moreover, the size of the sample also affects the width of the confidence interval; larger samples tend to produce more precise estimates of the population mean, while smaller samples yield larger confidence intervals. Therefore, random samples of different sizes from a given population will also produce different confidence intervals.

In summary, the confidence interval is a statistical measure that provides a range of likely values for the population parameter, such as the population mean. While it can be calculated using any random sample from a population, different samples of the same size or different sizes will generally produce different confidence intervals.

To know more about confidence interval click here:

brainly.com/question/24131141

#SPJ4

Answer:

So the lengths of the legs are approximately 8.6 cm and 15.6 cm.

Step-by-step explanation:

Let's call the smaller leg "x" and the larger leg "x + 7". According to the Pythagorean theorem, we know that:

x^2 + (x + 7)^2 = 17^2

Expanding the square on the left side and simplifying, we get:

2x^2 + 14x - 210 = 0

Dividing both sides by 2, we get:

x^2 + 7x - 105 = 0

Now we can solve for x using the quadratic formula:

x = (-7 ± sqrt(7^2 - 4(1)(-105))) / 2(1)

x = (-7 ± sqrt(649)) / 2

x ≈ -15.6 or x ≈ 8.6

Since we're dealing with lengths of sides in a triangle, we can't have a negative value for x. So we discard the negative solution and conclude that the smaller leg is approximately 8.6 cm.

To find the larger leg, we add 7 to x:

x + 7 ≈ 15.6 cm

The measure of the arc intercepted by the angle and the vertical angles make up the angle subtended at the center. As a result, XYZ has a value of 35°.

Two lines intersect at a location, creating an angle.

An "angle" is the term used to describe the width of the "opening" between these two rays. The character is used to represent it.

Angles are frequently expressed in degrees and radians, a unit of circularity or rotation.

In geometry, an angle is created by joining two rays at their ends. These rays are referred to as the angle's sides or arms.

An angle has two primary components: the arms and the vertex. T

he two rays' shared vertex serves as their common terminal.

Hence, The measure of the arc intercepted by the angle and the vertical angles make up the angle subtended at the center. As a result, XYZ has a value of 35°.

Learn more on angles here click here:

brainly.com/question/2046046

#SPJ1

Answer:

Step-by-step explanation:

To prove that z^2 + 1/2z is a real number, we need to show that the imaginary part of z^2 + 1/2z is equal to zero.

We know that z = (a+bi)/(a-bi)

Multiplying the numerator and denominator by the complex conjugate of the denominator, we get

z = (a+bi)(a+bi)/(a-bi)(a+bi)

z = (a^2 + 2abi - b^2)/(a^2 + b^2)

Expanding z^2, we get:

z^2 = [(a^2 + 2abi - b^2)/(a^2 + b^2)]^2

z^2 = (a^4 + 2a^2b^2 + b^4 - 2a^2b^2 + 4a^2bi - 4b^2i)/(a^4 + 2a^2b^2 + b^4)

Simplifying, we get:

z^2 = (a^4 - b^4 + 2a^2bi)/(a^4 + 2a^2b^2 + b^4)

Now, let's compute z^2 + 1/2z:

z^2 + 1/2z = (a^4 - b^4 + 2a^2bi)/(a^4 + 2a^2b^2 + b^4) + 1/2[(a+bi)/(a-bi)]

To simplify this expression, we need to find a common denominator:

z^2 + 1/2z = (2a^5 - 2a^3b^2 + 3a^4b - 3ab^4 - 2b^5 + 3a^3bi + 3ab^3i)/(2(a^4 + 2a^2b^2 + b^4))

We can see that the imaginary part of z^2 + 1/2z is (3a^3b - 3ab^3)/(2(a^4 + 2a^2b^2 + b^4))

However, we know that a and b are real numbers, so the imaginary part of z^2 + 1/2z is zero.

Therefore, z^2 + 1/2z is a real number.

Solving for CI in terms of the given lengths, we get: [tex]Cl=\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex]

Substituting this expression for CI and the given value for CG into the expression for BI, we get:  [tex]BI=CG-\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex].

A triangle is a three-sided polygon, which is a closed two-dimensional shape with straight sides. In a triangle, the three sides connect three vertices, or corners, and the angles formed by these sides are called the interior angles of the triangle. The sum of the interior angles of a triangle is always 180 degrees. Triangles can be classified by their side lengths and angle measurements. For example, an equilateral triangle has three sides of equal length, and all of its angles are 60 degrees; an isosceles triangle has two sides of equal length, and its base angles are also equal; a scalene triangle has three sides of different lengths, and all of its angles are also different. Triangles are a fundamental shape in mathematics and geometry, and they have numerous applications in fields such as architecture, engineering, physics, and more.

Given by the question.

Based on the given information, we can start by drawing a diagram of triangle ABC and the segments AH, BJ, CI, CJ, and BI as described.

Since CG = BG, we can draw the perpendicular bisector of side AC passing through point G, which will intersect side AB at its midpoint M.

Now, we can see that triangle CGB is isosceles with CG = BG, so the perpendicular bisector of side CB also passes through point G. This means that G is the circumcenter of triangle ABC, and therefore, the distance from G to any vertex of the triangle is equal to the radius of the circumcircle.

Next, we can use the fact that AJ and BJ are congruent to draw the altitude from point J to side AB, which we will call JN. Similarly, we can draw the altitude from point I to side BC, which we will call IM.

Since AJ and BJ are congruent, the altitude JN will also be the perpendicular bisector of side AB, so it will pass through point M. Similarly, the altitude IM will pass through point G, which is the circumcenter of triangle ABC.

Now, we can use the Pythagorean theorem to find the lengths of JN and IM in terms of the given lengths:

[tex]JN^{2}= AJ^{2} -AN^{2} \\ = ( AH+HN)^{2} - AN^{2} \\=AH^{2} +2AH*HN+HN^{2}-AN^{2} \\[/tex]

[tex]IM^{2}= CI^{2} -CM^{2} \\=( CG-GM)^{2} -CM^{2} \\CG^{2}-2CG*GM+GM^{2} -CM^{2}[/tex]

Since CG = BG and GM = BM (since M is the midpoint of AB), we can simplify the expression for IM^2 as follows:

[tex]IM^{2}[/tex] = [tex]BG^{2}[/tex] - 2BG * BM + [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]

= [tex]BG^{2}[/tex] - [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]

Now, we can use the fact that BJ and CI intersect at point K to find the length of KJ:

KJ = BJ - BJ * (CK/CI)

= BJ * (1 - CK/CI)

= BJ * (1 - BM/CM)

To find BM/CM, we can use the fact that triangle BCI is isosceles with BI = CI, so the altitude IM is also a median of the triangle. This means that CM = 2/3 * BI. Similarly, we can find BJ in terms of JN using the fact that triangle ABJ is isosceles with AJ = BJ:

BJ = 2 * JN

Substituting these expressions into the equation for KJ, we get:

KJ = 2 * JN * (1 - 2/3 * BI/CM)

Now, we just need to find BI/CM in terms of the given lengths. Using the fact that triangle BCI is isosceles with BI = CI, we can find BI in terms of CG:

BI = CG - CI

Substituting this expression into the equation for [tex]IM^{2}[/tex]and simplifying, we get:

[tex]IM^{2}[/tex] =[tex]BG^{2}[/tex] - CG * CI

To learn more about Pythagorean theorem:

https://brainly.com/question/28361847

#SPJ1

Step-by-step explanation:

try this option (see the attachment), answers are marked with red colour.

Preparation of a Corrected set of Financial Statements :

Income Statements :

PARTY WAGON .INC

INCOME STATEMENT

FOR THE YEAR ENDED DECEMBER 31

CURRENT YEAR

Party Revenue Earned

156,000

Total Revenue

156,000

Expenses :

Insurance Expenses

2,160

Office Rent Expense

14,400

Supplies Expense

1,440

Salary Expense

90,000

Repair and Maintainence expense

2,400

Travel Expense

7,200

Miscellaneous Expense

4,320

Interest Expense

5,280

Depreciation - Van

9,600

Depreciation -Music and Equipment

8,400

Total Expenses

145,200

Income Before Income Tax

10,800

Less : Income Tax Expense

2,400

Net Income

8,400

Jack included balance sheet accounts in the income statement, therefore the corrected income statement consisting of revenue and expenses accounts is provided above.

Statement of Retained Earnings :

Retained Earnings (As per adjusted trial balance)  18,000

Add : Net Income  8,400

Less : Dividends  (1,200)

Retained Earnings Dec 31, Current Year  25,200

Learn more about financial statement on;

https://brainly.com/question/26240841

#SPJ1

The values or variables listed in the function declaration are called formal parameters to the function.

They are used to store the data that is passed into the function when it is called. The formal parameters are local variables, meaning that the values stored in them are only available within the function.

The arguments are the values passed to the function when it is called. These values are then assigned to the formal parameters and are used within the function to perform the desired task.

Formal arguments are produced at function entry and removed at function exit, behaving similarly to other local variables inside the function.

To learn more about formal parameters link is here

brainly.com/question/15008938

#SPJ4

Answer:

52

Step-by-step explanation:

10.40 TIMES 3

According to the given information, Mary's total annual premium is $574 (rounded to the nearest dollar).

In mathematics, multiplication is an arithmetic operation that combines two or more numbers to produce a product. It is represented by the symbol "×" or "*", or by placing the numbers next to each other with no symbol between them.

Mary is 21 years old, so according to the rating factor table, her rating factor is 1.22 for a female.

For liability insurance, Mary has chosen the 50/100/25 coverage, which means $50,000 for bodily injury per person, $100,000 for bodily injury per accident, and $25,000 for property damage per accident. The premium for this coverage is $385.

For collision and comprehensive insurance, Mary has chosen a $500 deductible, so her premiums are $102 for collision and $87 for comprehensive.

To find the total annual premium, we add up the premiums for liability insurance and collision/comprehensive insurance:

Total premium = Liability premium + Collision premium + Comprehensive premium

Total premium = $385 + $102 + $87

Total premium = $574

Therefore, according to the given information, Mary's total annual premium is $574 (rounded to the nearest dollar).

To know more about multiplication visit :

https://brainly.com/question/1135170

#SPJ1

The appropriate 0.5 adjusted formula for normal approximation is option (d) p(x > 8.5)

The appropriate 0.5 adjusted formula for normal approximation to approximate binomial probabilities when n is large is

P(Z > (x + 0.5 - np) / sqrt(np(1-p)))

where Z is the standard normal variable, x is the number of successes, n is the number of trials, and p is the probability of success in each trial.

To approximate binomial probability p(x > 8) when n is large, we need to use the continuity correction and find the appropriate 0.5 adjusted formula for normal approximation. Here, x = 8, n is large, and p is unknown. We first need to find the value of p.

Assuming a binomial distribution, the mean is np and the variance is np(1-p). Since n is large, we can use the following approximation

np = mean = 8, and

np(1-p) = variance = npq

8q = npq

q = 0.875

p = 1 - q = 0.125

Now, using the continuity correction, we adjust the inequality to p(x > 8) = p(x > 8.5 - 0.5)

P(Z > (8.5 - 0.5 - 8∙0.125) / sqrt(8∙0.125∙0.875))

= P(Z > 0.5 / 0.666)

= P(Z > 0.75)

Therefore, the correct option is (d) p(x > 8.5)

Learn more about binomial probability here

brainly.com/question/29350029

#SPJ4

The given question is incomplete, the complete question is:

To approximate binomial probability p(x > 8) when n is large, identify the appropriate 0.5 adjusted formula for normal approximation. a) p(x > 7.5) b)  p(x >= 9) c) p(x > 9) d) p(x > 8.5)

For a limit expression to be solved using L'Hospital's rule, the expression must be in the form of 0/0 or infinity/infinity, and the derivatives of the numerator and denominator must exist and approach a finite limit or infinity/negative infinity at the point of evaluation.

L'Hospital's rule applies to limit expressions of the form 0/0 or infinity/infinity. Specifically, if we have a limit expression of form f(x)/g(x), where f(x) and g(x) both approach 0 or infinity as x approaches a certain value, then L'Hospital's rule may be applied to find the limit of the expression.

It is important to note that L'Hospital's rule can only be applied if the limit of the derivative of f(x) divided by the derivative of g(x) exists and is finite, or if the limit of the derivative of f(x) divided by the derivative of g(x) approaches infinity or negative infinity.

Therefore, for a limit expression to be solved using L'Hospital's rule, the expression must be in the form of 0/0 or infinity/infinity, and the derivatives of the numerator and denominator must exist and approach a finite limit or infinity/negative infinity at the point of evaluation.

Find out more about L'Hospital's rule

at brainly.com/question/30300388

#SPJ4

Answer:

RP = 25

Step-by-step explanation:

since the triangles are similar then the ratios of corresponding sides are in proportion, that is

[tex]\frac{RP}{EC}[/tex] = [tex]\frac{PQ}{CD}[/tex] ( substitute values )

[tex]\frac{RP}{15}[/tex] = [tex]\frac{15}{9}[/tex] ( cross- multiply )

9 RP = 15 × 15 = 225 ( divide both sides by 9 )

RP = 25

[tex]80[/tex] billion dollars' worth of net exports were made by China and Germany. The first claim is accurate.

Export is the process of supplying goods and services to some other nation. Contrarily, importing is the act of acquiring goods from outside and transferring them into one's own nation.

The domestic product (GDP) is a measure of all the products and services generated in the United States; thus, changes in exports change significantly in the demand for goods and services made in the United States abroad.

The total of China's and Germany's net exports would be:

[tex]50[/tex] billion + [tex]30[/tex] billion [tex]= 80[/tex] billion

As a result, Germany & China's consolidated net exports amounted to [tex]80[/tex] billion u.s. dollars, reflecting answer option (a).

To know more about exports visit:

https://brainly.com/question/20375046

#SPJ1

Roberto needs 4 square yards of fabric to make his costume.

A fraction that has the numerator higher than or equal to the denominator is said to be inappropriate. For instance, the fraction 7/3 is incorrect since 7 is bigger than 3. Mixed numbers, which combine a whole number and a correct fraction, can be created from improper fractions.

Given that, piece of fabric that is 2 2/3 yards long and 1 1/2 yard wide.

Convert the length from a mixed number to an improper fraction:

2 2/3 = (2 x 3 + 2)/3 = 8/3

1 1/2 = 3/2

The area of the rectangle is:

Area = Length x Width

Substituting the values we have:

Area = (8/3) x (3/2) = 4

Hence, Roberto needs 4 square yards of fabric to make his costume.

Learn more about improper fraction here:

https://brainly.com/question/29292275

#SPJ1

The amount of water that was in the cooler before it started leaking was 6 gallons.

Integration is a mathematical process that involves finding the integral of a function. It is the reverse operation of differentiation, which involves finding the derivative of a function. The integral of a function is a measure of the area under the curve of the function, between two given limits of integration.

The graph shows the rate at which water leaks from the cooler as a function of time, which means that the y-axis represents the rate of leakage in gallons per minute (gal/min), and the x-axis represents the time in minutes.

Since we know that the cooler emptied in 2 minutes, we can integrate the leakage rate over the time interval [0, 2] to find the total amount of water that leaked out:

Total amount of water leaked = ∫[0,2] leakage rate(t) dt

The leakage rate is given by the graph, which consists of a straight line connecting two points: (0,6) and (2,0). We can express this line as a linear equation in slope-intercept form:

leakage rate(t) = mt + b

where m is the slope of the line and b is the y-intercept. To find the slope, we can use the formula:

m = (y2 - y1) / (x2 - x1)

where (x1, y1) = (0,6) and (x2, y2) = (2,0). Plugging in the values, we get:

m = (0 - 6) / (2 - 0) = -3

So the equation of the line is:

leakage rate(t) = -3t + 6

Now we can integrate this equation over the time interval [0, 2] to get the total amount of water leaked:

Total amount of water leaked = ∫[0,2] (-3t + 6) dt

= [-3t²/2 + 6t] from 0 to 2

= (-3(2)²/2 + 6(2)) - (-3(0)²/2 + 6(0))

= (6 - 0) - (0 - 0)

= 6 gallons

Therefore, the amount of water that was in the cooler before it started leaking was 6 gallons.

To know more about amount visit:

https://brainly.com/question/14806644

#SPJ1

The complete question is :

The average rate of change between the points (17, 5) and (19, -1) is -3.

If we have a given function y = f(x) with two known points (a, f(a)) and (b, f(b)), then the average rate of change in that interval [a, b] is:

R = ( f(b) - f(a))/(b - a)

Here we have the two points (17, 5) and (19, -1)

So we have:

a = 17 and f(a) = 5

b = 19 and f(b) = -1

Replacing that in the formula for the average rate of change we will get:

R = (-1 - 5)/(19 - 17)

R = -6/2

R = -3

The average rate of change is -3

Learn more about average rate of change:

https://brainly.com/question/872850

#SPJ1

Answer: 314 square meters

Step-by-step explanation:

The formula for the area of a circle is given by A = πr^2, where r is the radius of the circle. Since the diameter of the circular patch is given as 20 meters, the radius would be half of that or 10 meters.

So, using the formula, we can calculate the area of the circular patch as follows:

A = πr^2

A = π(10)^2

A = 3.14(100)

A = 314 square meters

Therefore, the area of the circular patch is 314 square meters.

Answer:

Anna had 23 sweets in her bag at the start of the day.

Step-by-step explanation:

Let's use working backwards to find out how many sweets were in the bag at the start of the day.

At the end of lesson 4, Anna had 1 sweet left in her bag. So, before she gave a sweet to her teacher in lesson 4, she had 2 sweets left in her bag.

In lesson 3, she gave out half of the sweets left in her bag and then gave one to the teacher. So, before she gave a sweet to her teacher in lesson 3, she had 2 x 2 + 1 = 5 sweets in her bag.

In lesson 2, she gave out half of the sweets left in her bag and then gave one to the teacher. So, before she gave a sweet to her teacher in lesson 2, she had 5 x 2 + 1 = 11 sweets in her bag.

In lesson 1, she gave out half of the sweets in her bag and then gave one to the teacher. So, before she gave a sweet to her teacher in lesson 1, she had 11 x 2 + 1 = 23 sweets in her bag.

Therefore, Anna had 23 sweets in her bag at the start of the day.

The equation is saying that -12 is equal to -3 multiplied by y. To solve for y, divide both sides by -3. This would give an answer of 4.

An equation is a mathematical statement that expresses the equality or inequality of two values or expressions. It consists of two expressions connected by an equals sign, inequality sign or other relational operator. Equations can involve numbers, variables, and operations such as addition, subtraction, multiplication, division and exponentiation. An equation can be used to solve problems related to mathematics, science, engineering, finance, and many other disciplines. Equations can also be used to model and describe real-world phenomena.

t = 30

a = 12.5

p = -5.5

x = 2/3

y = 4.

To learn more about equation

https://brainly.com/question/2228446

#SPJ1

a. t = 30/2; To solve this equation, divide both sides by 2/5. The resulting equation is t = 30/2.

An equation is a mathematical statement that expresses the equality of two expressions by using an equals sign (=). It states that the two expressions on either side of the equals sign are equal in value. An equation is an example of a mathematical problem, which can be used to solve real-world problems.

b. a = 4.5; To solve this equation, add 8 to both sides. The resulting equation is a = 4.5.
c. p = -7/2; To solve this equation, add 3 to both sides. The resulting equation is p = -7/2.
d. x = 2; To solve this equation, divide both sides by 3. The resulting equation is x = 2.
e. y = 4; To solve this equation, divide both sides by -3. The resulting equation is y = 4.

To learn more about equation
https://brainly.com/question/2228446
#SPJ1

The equation of the tangent line to the curve sin( x y) = 8x- 8y on the factor( π, π) is y = (7/9) x-( 2π/ 9).

To discover the equation of the tangent line to the curve sin( x y) = 8x- 8y on the point( π, π), we want to apply implicit differentiation to discover the pitch of the tangent line at that point.

We begin through differencing both sides of the equation with reference to xcos( x y)( 1 dy/ dx) = eight- 8dy/ dx

After, we can simplify the expression by isolating the terms beholding dy/ dx on one aspect

cos( x y) cos( x y) dy/ dx = 8- 8dy/ dx

8 cos( x y)) dy/ dx = 8- cos( x y)

dy/ dx = ( 8- cos( x y))( 8 cos( x y))

Now we're suitable to discover the pitch of the tangent line at the factor( π, π) by plugging in x = π and y = π into the expression we simply derived

dy/ dx = ( 8- cos( 2π))( 8 cos( 2π))

dy/ dx = ( 8- 1)/( 8 1)

dy/ dx = 7/ nine

Thus, the pitch of the tangent line to the curve sin( x y) = 8x- 8y at the factor( π, π) is7/9.

To find the equation of the tangent line, we can use the point- slope form of the equation

y- y1 = m( x- x1)

In which m is the pitch we simply set up, and( x1, y1) is the point( π, π). Plugging in the values, we get

y- π = ( 7/ nine)( x- π)

Simplifying, we get

y = ( 7/ nine) x-( 2π/ nine)

Thus, the equation of the tangent line to the curve sin( x y) = 8x- 8y on the factor( π, π) is y = (7/9) x-( 2π/ 9).

Learn more about  implicit differentiation:-

https://brainly.com/question/30073882

#SPJ4

Answer: A matrix A of dimension n x n is called invertible if and only if there exists another matrix B of the same dimension, such that AB = BA = I, where I is the identity matrix of the same order.

Step-by-step explanation:

hope it helped! <3

Therefore, the only statement that is true is: "The new area is 6 times the original area."

Area is a measure of the size or extent of a two-dimensional surface or region, such as the surface of a square, rectangle, circle, triangle, or any other shape. It is expressed in square units, such as square meters, square feet, or square centimeters.

Here,

If the side lengths of a square are tripled, the new side length will be 2 mm x 3 = 6 mm.

The original area of the square is:

Area = side length x side length = 2 mm x 2 mm = 4 mm²

The new area of the square with tripled side lengths will be:

New area = new side length x new side length = 6 mm x 6 mm = 36 mm²

Therefore, the new area of the square will be 36 mm².

To determine which of the following statements about its area will be true, we need to see which statements are true for the new area of 36 mm²:

A. The new area is 6 times the original area. This statement is true because 36 mm² is 6 times larger than 4 mm².

B. The new area is 3 times the original area. This statement is false because 36 mm² is 9 times larger than 4 mm², not 3 times larger.

C. The new area is equal to the original area. This statement is false because the new area of 36 mm² is much larger than the original area of 4 mm².

To know more about area,

https://brainly.com/question/22469440

#SPJ1

Complete question:

look at this square: 2 mm 2 mm if the side lengths are tripled, then which of the following statements about its area will be true?

The ratio of the new area to the old area will be 2:1

The ratio of the new area to the old area will be 6:1.

The ratio of the new area to the old area will be 1:2.

The ratio of the new area to the old area will be 4:1.

Answer:

Assuming that (gof)(5) means (g(f(5))):

(gof)(5) = g(f(5)) = g(3x + 7) = 5x + 2

Therefore, (gof)(5) = 5(3x + 7) + 2 = 15x + 17.