Answer:
False
Explanation:
The reaction rate increases if the temperature also increases, as does the concentration of ractives or the presence of catalysts.
The reaction rate talks about how reagents are converted into products as a function of time, this process can take less or more depending on the factors to which the reaction is exposed.
The increasing temperature generates an increase in the kinetic energy of the particles, promoting their proximity and their reaction between them to be able to give the final product, so a faster reaction occurs, which is why it has promoted when the particles collide.
Why will the conjugate base of a weak acid affect pH? Select the correct answer below: it will react with hydroxide
Answer:
It will react with water
Explanation:
I know this is an older question, but I just wanted to provide the correct answer.
Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.
The conjugate base of a weak acid affect pH because it will react with hydronium ion.
A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.
Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;
CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)
We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.
Learn more: https://brainly.com/question/8592296
Missing parts;
Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above
A solution of LiCl in water has XLiCl = 0.0800. What is the molality? A solution of LiCl in water has XLiCl = 0.0800. What is the molality? 4.44 m LiCl 8.70 m LiCl 4.83 m LiCl 4.01 m LiCl
Answer:
mol LiCl = 4.83 m
Explanation:
GIven:
Solution of LiCl in water XLiCl = 0.0800
Mol of water in kg = 55.55 mole
Find:
Molality
Computation:
mole fraction = mol LiCl / (mol water + mol LiCl)
0.0800 = mol LiCl / (55.55 mol + mol LiCl)
0.0800 mol LiCl + 4.444 mol = mol LiCl
mol LiCl - 0.0800 mol LiCl = 4.444 mol
0.92 mol LiCl = 4.444 mol
mol LiCl = 4.83 m
The direction of the functional group is called?
Explanation:
they are called hydrocarbyls
pls mark me brainliest
Answer:
The first carbon atom that attaches to the functional group is referred to as the alpha carbon.
105/22 • (1.251 - 0.620)=
Answer:
105/22*(1.251-0.620)
105/22*0.631
4.772*0.631
3.011132
Hope it helps
Answer:
3.0
Explanation:
First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).
The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.
A sample of ammonia gas was allowed to come to equilibrium at 400 K. 2NH3(g) <----> N2(g) 3H2(g) At equilibrium, it was found that the concentration of H2 was 0.0484 M, the concentration of N2 was 0.0161 M, and the concentration of NH3 was 0.295 M. What was the initial concentration of ammonia
Answer:
0.327 M
Explanation:
Step 1: Write the balanced equation
2 NH₃(g) ⇄ N₂(g) + 3H₂(g)
Step 2: Make an ICE chart
2 NH₃(g) ⇄ N₂(g) + 3 H₂(g)
I x 0 0
C -2y +y +3y
E x-2y y 3y
Step 3: Find the value of y
The concentration of N₂ at equilibrium is 0.0161 M. Then,
y = 0.0161
Step 4: Find the value of x
The concentration of NH₃ at equilibrium is 0.295 M. Then,
x-2y = 0.295
x-2(0.0161) = 0.295
x = 0.327
Click on ALL of the following that use sound waves to communicate with their surroundings and find their way! bats cars dolphins whales birds submarines buses school
I add a 50. g piece of Al (c = 0.88 J/g-deg) that is at 225°C to 100. mL of water at 20°C. What is the final temperature of the water in °C? The density of water is approximately 1g/mL.
Answer:
THE FINAL TEMPERATURE OF WATER IS -4.117 °C
Explanation:
Mass of the aluminium = 50 g
c = 0.88 J/g C
Initial temperature of aluminium = 225 °C
Volume of water = 100 ml
Density of water = 1 g/ml
Mass of water = density * volume of water
Mass of water = 1 * 100 = 100 g of water
Initial temperature of water = 20 C
It is worthy to note that the heat of a system is constant and conserved as no heat is lost or gained by a closed system,
So therefore,
heat lost by aluminium = heat gained by water
H = mass * specific heat capacity * temeprature change
So:
m c ( T2- T1) = m c (T2-T1)
50 * 0.88 * ( T2 - 225) = 100 * 4.18 *( T2 - 20)
44 ( T2 - 225 ) = 418 ( T2 - 20)
44 T2 - 9900 = 418 T2 - 8360
-9900 + 8360 = 418 T2 - 44 T2
-1540 = 374 T2
T2 = - 4.117
So therefore the final temperature of water is -4.117 °C
The solubility of lead(II) iodide is 0.064 g/100 mL at 20ºC. What is the solubility product for lead(II) iodide?
Answer:
[tex]Ksp=1.07x10^{-8}[/tex]
Explanation:
Hello,
In this case, the dissociation reaction is:
[tex]PbI_2(s)\rightleftharpoons Pb^{2+}(aq)+2I^-(aq)[/tex]
For which the equilibrium expression is:
[tex]Ksp=[Pb^{2+}][I^-]^2[/tex]
Thus, since the saturated solution is 0.064g/100 mL at 20 °C we need to compute the molar solubility by using its molar mass (461.2 g/mol)
[tex]Molar solubility=\frac{0.064g}{100mL}*\frac{1000mL}{1L}*\frac{1mol}{461.2g}=1.39x10^{-3}M[/tex]
In such a way, since the mole ratio between lead (II) iodide to lead (II) and iodide ions is 1:1 and 1:2 respectively, the concentration of each ion turns out:
[tex][Pb^{2+}]=1.39x10^{-3}M[/tex]
[tex][I^-]=1.39x10^{-3}M*2=2.78x10^{-3}M[/tex]
Thereby, the solubility product results:
[tex]Ksp=(1.39x10^{-3}M)(2.78x10^{-3}M)^2\\\\Ksp=1.07x10^{-8}[/tex]
Regards.
Solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].
The dissociation reaction for lead (II) iodide
[tex]\bold {Pb I^2 (s) \leftrightharpoons Pb^2^+ + 2I^- }[/tex]
Solubility product constant at equilibrium.
[tex]\bold {Ksp = [Pb^2^++[I^-]^2}[/tex]
The molar solubility of the substance can be calculated by using the molar mass,
[tex]\bold {s = \dfrac {0.064}{100 mL} \times 461.2 g/mol = 1.39x10^-^3}[/tex]
Molar ratio between between PbI to lead and iodide ions is 1:1 and 1:2 respectively.
Thus Ksp will be,
[tex]\bold {Ksp =(1.39x10^-^3)(2.78x10^-^3 )^2}\\\\\bold {Ksp = 1.07x 10^-^8}[/tex]
Therefore, solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].
To know more about solubility product constant,
https://brainly.com/question/1419865
Calculate the molar solubility of CaF2 at 25°C in a solution that is 0.010 M in Ca(NO3)2. The Ksp for CaF2 is 3.9 x 10-11.
Answer:
[tex]Molar \ solubility=3.12x10^{-5}M[/tex]
Explanation:
Hello,
In this case, for the dissociation of calcium fluoride:
[tex]CaF_2(s)\rightleftharpoons Ca^{2+}+2F^-[/tex]
The equilibrium expression is:
[tex]Ksp=[Ca^{2+}][F^-]^2[/tex]
In such a way, via the ICE procedure, including an initial concentration of calcium of 0.01 M (due to the calcium nitrate solution), the reaction extent [tex]x[/tex] is computed as follows:
[tex]3.9x10^{-11}=(0.01+x)(2*x)^2\\\\x=0.0000312M[/tex]
Thus, the molar solubility equals the reaction extent [tex]x[/tex], therefore:
[tex]Molar \ solubility=3.12x10^{-5}M[/tex]
Regards.
The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].
The dissociation of calcium fluoride has been given by:
[tex]\rm CaF_2\;\rightarrow\;Ca^2^+\;+\;2\;F^-[/tex]
The solubility constant, ksp has been given as:
[tex]ksp=\rm[Mg^2^+]\;[F^-]^2[/tex]
From the dissociation of Calcium nitrate, the concentration of Ca ion in the solution has been 0.01 M.
The dissociation of Calcium fluoride x M has been resulted in x M Ca and 2x M F ions.
The concentration of Ca in the solution has been resulted as x + 0.01 M.
The solubility product can be given as:
[tex]3.9\;\times\;10^-^1^1=[x+0.01]\;[2x]^2\\3.9\;\times\;10^-^1^1=[x+0.01]\;4x^2\\x=3.12\;\times\;10^-^5[/tex]
The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].
For more information about molar solubility, refer to the link:
https://brainly.com/question/7141822
Candle wax melts low temperature, it is not conductive to electricity, it is insoluble in water and partially soluble in solvents nonpolar, like gasoline. Than type of links are present in the candle wax?
A. Electrostatics.
B. Apolar.
C. lónicos.
D. Hydrogen bridges.
electrostatic and ionic are definitely not the answer because they have high melting point
hydrogen bonds are too weak and not permanent.
so the answer is apolar as it is soluble in polar solvents (water)
Answer:
B. Nonpolar
Explanation:
The low melting point tells you the compound is not ionic, metallic, or a network solid.
It is almost certainly a molecular solid.
It does not conduct electricity, so it is not metallic (which we have already ruled out).
It is insoluble in polar solvents (water) and soluble in nonpolar solvents (gasoline).
Since like dissolves like, the molecule is nonpolar.
The type of links must be nonpolar.
What is the pOH of a solution at 25.0∘C with [H3O+]=4.8×10−6 M?
Answer:
8.68
Explanation:
pOH = 8.68
all you need is contained in the sheet
Answer:
Approximately [tex]8.68[/tex].
Explanation:
The [tex]\rm pOH[/tex] of a solution can be found from the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] with the following equation:
[tex]\displaystyle \rm pOH = -\log_{10} \rm \left[OH^{-}\right][/tex].
On the other hand, the ion-product constant of water, [tex]K_{\text{w}}[/tex], relates the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] of a solution to its hydronium ion concentration [tex]\rm \left[{H_3O}^{+}\right][/tex]:
[tex]K_\text{w} = \rm \left[{H_3O}^{+}\right] \cdot \rm \left[OH^{-}\right][/tex].
At [tex]25 \; ^\circ \rm C[/tex], [tex]K_{\text{w}} \approx 1.0 \times 10^{-14}[/tex]. For this particular [tex]25 \; ^\circ \rm C[/tex] solution, [tex]\rm \left[{H_3O}^{+}\right] = 4.8 \times 10^{-6}\; \rm mol \cdot L^{-1}[/tex].Hence the [tex]\rm \left[OH^{-}\right][/tex] of this solution:
[tex]\begin{aligned}\left[\mathrm{OH}^{-}\right] &= \frac{K_\text{w}}{\rm \left[{H_3O}^{+}\right]} \\ &= \frac{1.0 \times 10^{-14}}{4.8 \times 10^{-6}}\; \rm mol\cdot L^{-1} \approx 2.08333 \times 10^{-9}\; \rm mol\cdot L^{-1}\end{aligned}[/tex].
Therefore, the [tex]\rm pOH[/tex] of this solution would be:
[tex]\begin{aligned}\rm pOH &= -\log_{10} \rm \left[OH^{-}\right] \\ &\approx -\log_{10} \left(4.8 \times 10^{-6}\right) \approx 8.68\end{aligned}[/tex].
Note that by convention, the number of decimal places in [tex]\rm pOH[/tex] should be the same as the number of significant figures in [tex]\rm \left[OH^{-}\right][/tex].
For example, because the [tex]\rm \left[{H_3O}^{+}\right][/tex] from the question has two significant figures, the [tex]\rm \left[OH^{-}\right][/tex] here also has two significant figures. As a result, the [tex]\rm pOH[/tex] in the result should have two decimal places.
Advantages of using a resource person in handling the first aid lesson
The advantage of a resource person would be that it will provide a hands-on activity that will allow the students to experience spacing between organs and on the body of the person.
It will also allow them to identify challenges when doing this and will engage them more in the activity and lesson.
Answer:A resource person add knowledge to the course
Explanation:
Which of the following types of electromagnetic radiation have higher frequencies than visible light and which have shorter frequencies than visible light? Sort them accordingly. ltems (6 items) (Drag and drop into the appropriate area below)
a. Gamma rays
b. Infrared radiation
c. Ultraviolet liht
d. X-rays
e. Microwaves
f. Radio waves
Answer:
Higher frequency than visible light - Ultraviolet light, X-rays, and Gamma rays
Lower frequency than visible light - Infrared radiation, microwaves, and Radio waves
Explanation:
The frequencies of electromagnetic radiations vary according to their wavelengths. The relationship between the frequency and wavelength of the waves is expressed such that:
λ = c/f, where λ = wavelength, c = speed of light, and f = frequency.
Thus, there is an inverse relationship between the wavelength and the frequency of electromagnetic waves.
The order of the electromagnetic waves based on their frequency from the lowest to the highest is radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma-rays
Hence, electromagnetic waves with higher frequencies than visible light include ultraviolet light, X-rays, and Gamma rays while those with lower frequencies include Infrared radiation, microwaves, and Radio waves.
Answer:
need points
Explanation:
Identify a homogeneous catalyst. Identify a homogeneous catalyst. Pd in H2 gas N2 and H2 catalyzed by Fe SO2 over vanadium (V) oxide Pt with methane H2SO4 with concentrated HCl
Answer:
H2SO4 with concentrated HCl
A soft drink contains 63 g of sugar in 378 g of H2O. What is the concentration of sugar in the soft drink in mass percent
Answer:
[tex]\% m/m= 14.3\%[/tex]
Explanation:
Hello,
In this case, the by mass percent is computed as shown below:
[tex]\% m/m=\frac{m_{solute}}{m_{solute}+m_{solvent}} *100\%[/tex]
Whereas the solute is the sugar and the solvent the water, therefore, the concentration results:
[tex]\% m/m=\frac{63g}{63g+378g} *100\%\\\\\% m/m= 14.3\%[/tex]
Best regards.
i) Briefly discuss the strengths and weaknesses of the four spectroscopy techniques listed below. Include in your answer the specific structural information you get from each method.
IR
UV-VIS
NMR
Mass Spec
delete please .....................................
g The electronic structure of which ONE of the following species cannot be adequately described by a single Lewis formula? (In other words, the electronic structure of which one can only be described by drawing two or more resonance structures?) A) C2H4 B) SO3 2– C) SO3 D) C3H8 E) HCN
Answer:
C) SO3
Explanation:
Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.
SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.
Hence, the correct answer is C) SO3
Consider the following reaction at 298.15 K: Co(s)+Fe2+(aq,1.47 M)⟶Co2+(aq,0.33 M)+Fe(s) If the standard reduction potential for cobalt(II) is −0.28 V and the standard reduction potential for iron(II) is −0.447 V, what is the cell potential in volts for this cell? Report your answer with two significant figures.
Answer:
The correct answer is 0.186 V
Explanation:
The two hemirreactions are:
Reduction: Fe²⁺ + 2 e- → Fe(s)
Oxidation : Co(s) → Co²⁺ + 2 e-
Thus, we calculate the standard cell potential (Eº) from the difference between the reduction potentials of cobalt and iron, respectively, as follows:
Eº = Eº(Fe²⁺/Fe(s)) - Eº(Co²⁺/Co(s)) = -0.28 V - (-0.447 V) = 0.167 V
Then, we use the Nernst equation to calculate the cell potential (E) at 298.15 K:
E= Eº - (0.0592 V/n) x log Q
Where:
n: number of electrons that are transferred in the reaction. In this case, n= 2.
Q: ratio between the concentrations of products over reactants, calculated as follows:
[tex]Q = \frac{ [Co^{2+} ]}{[Fe^{2+} ]} = \frac{0.33 M}{1.47 M} = 0.2244[/tex]
Finally, we introduce Eº= 0.167 V, n= 2, Q=0.2244, to obtain E:
E= 0.167 V - (0.0592 V/2) x log (0.2244) = 0.186 V
What is advertising used for? Check all that apply. influencing consumer tastes tracking product popularity increasing product awareness promoting company branding gathering data about potential consumers
Answer:
influencing consumer tastes
increasing product awareness
promoting company branding
Explanation:
Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:
Creative advertisements, influence customers or consumers to buy the product.Advertisings involve information regarding the product and so increases product awareness.Advertising on social media platforms, TVs, radio and newspapers, promotes company branding.Hence, the correct options are:
influencing consumer tastesincreasing product awarenesspromoting company branding
Answer:
1,3,4
Explanation:
I took the test
Given that π = n M R T, rearrange the equation to solve for V
Answer:
V= n/M
Explanation:
From;
π = nRT/V = MRT
Where;
n= number of moles
R= gas constant
T= absolute temperature
M= molar mass
V= volume of the solution
π= osmotic pressure
Thus;
nRT/V = MRT
nRT = VMRT
V= nRT/MRT
V= n/M
If an individual proton has mass 1.007825 amu, and an individual neutron has mass 1.008665 amu, what's the calculated mass of a neptunium-236 nucleus? options: A) 237.92482 amu B) 236.99873 amu C) 237.96682 amu D) 237.04817 amu
Answer:
C) 237.96682 amu
Explanation:
The symbol for neptunium-236 is given as;
²³⁶₉₃Np
This element has 93 protons and (236 - 93 = 143) neutrons.
Mass Number =Total mass of Protons + Total mass of neutrons
Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu
Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu
Mass = 144.239095 + 93.727725 = 237.96682 amu
Correct option is option C.
From the graph of Density vs. Concentration, created in Graph 1, what was the relationship between the concentration of the sugar solution and the density of the sugar solution?
The graph is not given in the question, so, the required graph is attached below:
Answer:
According to the graph, the relationship between the density of the sugar solution and the concentration of the sugar solution is directly proportional to each other as they both are increasing exponentially.
The graph shows that, the density of sugar solution will increase with the increase in concentration of sugar in the solution.
If 11.2 g of naphthalene, C10H8, is dissolved in 107.8 g of chloroform, CHCl3, what is the molality of the solution
Answer:
CHC12
Explanation:
i am not really sure i am onna do a quick research 4 u tho
suppose you make lemonade with one can lemonade concentrate mixed with four cans of water. What is the fraction of the final product that is water
Answer:
0.8 part of the product is water
Explanation:
Volume (or parts) of water = 4
Volume (or parts) of lemonade = 1
Total volume = 4 + 1 = 5
Fraction of water = Volume of water / Total volume = 4 / 5 = 0.8
We discussed the different types of intermolecular forces in this lesson, which can affect the boiling point of a substance.
1. Which of these has the highest boiling point?
A) Ar
B) Kr
C) Xe
D) Ne
2. Which substance has the highest boiling point?
A) CH4
B) He
C) HF
D) Cl2
Answer:
1, C, Xe 2, B,He
Explanation:
1, cause as u go down a group the boiling point increases.
2, boiling point of single element is greater than a compound
According to periodic trends in periodic table boiling point increases down the group and hence Xe has highest boiling point and more amount of heat is required to boil an element hence He has highest boiling point.
What is periodic table?
Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.
It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.
Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.
Learn more about periodic table,here:
https://brainly.com/question/11155928
#SPJ2
What is the value of the equilibrium constant, K, for a reaction for which ∆G° is equal to –5.20 kJ at 50°C?
Answer:
6.93
Explanation:
Step 1: Given data
Standard Gibbs free energy (∆G°): -5.20 kJTemperature (T): 50°CEquilibrium constant (K): ?Step 2: Convert the temperature to the Kelvin scale
We will use the following expression.
K = °C + 273.15
K = 50°C + 273.15
K = 323 K
Step 3: Calculate K
We will use the following expression.
∆G° = -R × T × ln K
-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K
K = 6.93
How many molecules are there in 3.5 moles of carbon dioxide? A. 63.21 x 10^23 B. 21.07 x 10^23 C. 42.14 x 10^23 D. 6.02 x 10^23
Answer:
B. 21.07 x 10²³ molecules
Explanation:
Avogadro's Number: 6.022 x 10²³
Step 1: Set up equation
[tex]3.5 mols CO_2(\frac{6.022(10^{23}) moleculesCO_2}{1 mol CO_2})[/tex]
Step 2: Multiply and cancel out units
3.5(6.022 x 10²³) = 21.07 x 10²³ molecules CO₂
Step 3: Convert to proper scientific notation
≈ 2.11 x 10²³ molecules CO₂
Chlorine monoxide and dichlorine dioxide are involved in the catalytic destruction of stratospheric ozone. They are related by the equation:
2ClO(g) ⇌ Cl2O2(g) for which Kc is 4.96×10^11 at 273 K.
For an equilibrium mixture in which [Cl2O2] is 6.00 x 10^-6M, what is [ClO]?
Answer:
[ClO] = 3.48×10¯⁹ M.
Explanation:
The following data were obtained from the question:
Equilibrium constant (Kc) = 4.96×10¹¹
Concentration of Cl2O2, [Cl2O2] = 6x10¯⁶ M.
Concentration of ClO, [ClO] =.?
The equation for the reaction is given below:
2ClO(g) ⇌ Cl2O2(g)
The equilibrium constant for a reaction is simply defined as the ratio of the concentration of product raised to their coefficient to the concentration of the reactant raised to their coefficient.
The equilibrium constant, Kc for the reaction is given by:
Kc = [Cl2O2] / [ClO]²
Thus, we can calculate the concentration of ClO, [ClO] as follow:
Kc = [Cl2O2] / [ClO]²
4.96×10¹¹ = 6x10¯⁶ / [ClO]²
Cross multiply
4.96×10¹¹ × [ClO]² = 6x10¯⁶
Divide both side by 4.96×10¹¹
[ClO]² = 6x10¯⁶ / 4.96×10¹¹
[ClO]² = 1.21×10¯¹⁷
Take the square root of both side
[ClO] = √ (1.21×10¯¹⁷)
[ClO] = 3.48×10¯⁹ M
Therefore, the concentration of ClO, [ClO] is 3.48×10¯⁹ M.
How many grams of sodium chloride are required to make 2.00 L of a solution with a concentration of 0.100 M?
Answer:
Mass = 11.688g
Explanation:
Volume = 2.00L
Molar concentration = 0.100M
Mass = ?
These quantities are relatted by the following equation;
Conc = Number of moles / volume
Number of moles = Conc * Volume = 2 * 0.100 = 0.2 mol
Number of moles = Mass / Molar mass
Mass = Number of moles * Molar mass
Mass = 0.2mol * 58.44g/mol
Mass = 11.688g
Increasing which factor will cause the gravitational force between two objects to decrease?
weights of the objects
distance between the objects
acceleration of the objects
masses of the objects
Answer:
B
Explanation:
Increasing distance between the objects factor will cause the gravitational force between two objects to decrease. Therefore, option B is correct.
What causes gravitational force to decrease?The gravitational force grows in proportion to the size of the masses . The gravitational force weakens rapidly as the distance between masses grows. Unless at least one of the objects has a lot of mass, detecting gravitational force is extremely difficult.
Gravity is affected by object size and distance between objects. Mass is a unit of measurement for the amount of matter in an object.
The force of gravity is proportional to the masses of the two objects and inversely proportional to the square of the distance between them. This means that the force of gravity increases with mass but decreases as the distance between objects increases.
Thus, option B is correct.
To learn more about the gravitational force, follow the link;
https://brainly.com/question/12528243
#SPJ6
