Answer:
Explanation:
One possible safety restraint or device for a motorcycle 4-wheeler or go-kart could be a roll cage. A roll cage is a structure that surrounds the driver and is designed to protect them in the event of a rollover or collision.
The roll cage would be made of strong, lightweight material such as steel or aluminum tubing. It would be attached to the frame of the 4-wheeler or go-kart and would extend upward to surround the driver's head and shoulders. The roll cage would also have additional bracing to provide additional support and protection in the event of a collision.
In the event of a rollover or collision, the roll cage would help to distribute the forces of the impact evenly around the driver, protecting them from the full force of the collision. The additional bracing would also help to prevent the roll cage from collapsing or deforming, providing additional protection for the driver.
In addition to the roll cage, the driver could also wear a safety harness or seat belt to help keep them securely attached to the vehicle and prevent them from being thrown out in the event of a collision. This would provide additional protection against the forces of a collision.
Two forces of 5N and 12N act at a point The two force first act in opposite directions
a, Make a sketch showing the direction of the forces.
b, calculate the resultant of the forces and mark its direction on your sketch.
The resultant of the force that acts in opposite directions is 7 N.
What is the resultant force?We know that the resultant force is the force that has the same effect in magnitude and direction as two or more forces that is acting together. We have to note that the force that is actinmg on an object is a vector quantity. The implication of this is that the magnitude and the direction of the forces that are acting on the body is very important.
By the use of the law of vectors we can be able to write in the case of the question that we have here, we can see that the forces are acting in the opposite directions. The implication of this is that we would have to subtract the forces so as obtain the resultant force.
We have to note that when we have opposite forces, one is said to be positive and the other negative and the resultant force can be found by subtraction. As such the resultant force can be obtained from;
Let the +B force be 12 N
Let the -B force be 5N
12 N - 5 N = 7 N
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
an increase in sound level from 30 db to 50 db requires an increase in sound intensity by a factor of:
Loudness increases by 10 dB for every dB increase in sound intensity. A 40-decibel light rainstorm is 100 times louder than a whisper, whereas a 30-decibel "silent" room is 10 times louder than a 20-decibel whisper. Loud noises can be harmful.
50 dB is how much louder than 20 dB?A 10 dB rise results in a two-fold increase in volume. The loudness will therefore rise by nearly 8 times with a 30 dB increase (from 20 dB to 50 dB).
Decibels are measured on a logarithmic scale using a power of ten, which might be perplexing. For those of you without advanced math degrees, this simply implies that the sound intensity doubles for every 10 decibel rise.
learn more about Decibels refer
https://brainly.com/question/28375244
#SPJ4
9. a soap bubble is 100 nm thick and illuminated by white light incident perpendicular to its surface. what wavelength and color of visible light is most constructively reflected, assuming the same index of refraction as water?
When a soap bubble 100 nm thick and illuminated by white light incident perpendicular to its surface, then wavelength, λ is calculated = 5.32 *10^-7 m.
What is index of refraction?The ratio of the speed of light in a vacuum, c, to the speed of light in a medium, c' is called as index of refraction. One of the consequence of this difference in speed is that when light goes from one medium to another at an angle, then the propagation vector in the new medium has a different angle with respect to normal.
Given, t= 100nm= 100 * 10 ^-9 n= 1.33
ΔФ1 = λ/4
ΔФ2 = 2√2 t λ n/2 λ
=2 t n
=2 * 100 * 10 ^-9 * 1.33
= 2.66 *10^-7
2.66 *10^-7= λ/2
λ= 5.32 *10^-7 m.
To know more about index of refraction, refer
https://brainly.com/question/12469161
#SPJ4
John walks to the pizza place for lunch. He walks 2 km north, then 1 km east. To get home, he walks 2 km west and 1 km south. What distance did he travel? What is his displacement?
Answer:
The total distance covered is 3 km and the displacement is 2.24 km.
Explanation:
For the total distance covered by Anthony, we just add all of the distances.
1 km (going east) + 1 km (going east again) + 1 km (going south) = 3 km
Hence, the his total distance covered when he went to the pizza place is 3 km.
Solving for the displacement is a different matter. We cannot just add all of the distances. From analysis of the problem, Anthony traveled and formed a right triangle. He traveled 1 km east twice, making it 2 km east in total, then he traveled 1 km south.
When dealing with a right triangle with 2 sides given (for this problem the two sides are the 2 km east and the 1 km south), we use the Pythagorean Theorem.
Solution:
c² = a² + b² (Pythagorean Theorem)
c will be the longest side of the right triangle
a and b will be the other sides of the right triangle
c = √ (a² + b²)
c = √ (2² km + 1² km)
c = √5 km
c = 2.2361 km ≈ 2.24 km
Therefore, the displacement of Anthony is 2.24 km.
Read more about right triangle here:
brainly.ph/question/2449553
Know more about Pythagorean Theorem here:
brainly.ph/question/77971
example 10.11 discusses the conversion of spring potential energy to kinetic energy. how much energy is initially stored in the spring?
A spring-loaded to gun is used to launch a 10 plastic ball. The spring, which has a spring constant of 10 N/m, is compressed by 10 cm as the ball is pushed into the barrel. When the trigger is pulled, the spring is released and shoot the ball back out horizontally.
Answer:
Below
Explanation:
ESE = 1/2 k d^2
= 1/2 * 10 N/m * .1 m = .5 J
building a dam to produce hydro-electric power and create water storage is one way to take advantage of a common renewable resource. this produces much less pollution than a coal burning plant. water being let out of the dam also produces a lot of kinetic (movement) energy. however, building dams are not a perfect solution. what is the most likely problem related to dams?
Using the water that is both held in dams and flowing in rivers, hydropower, also known as hydroenergy, is a renewable energy source.
What kind of electricity does a dam generate when it transforms the force of the water into electrical energy?In order to generate electricity, hydroelectric power uses the force of moving water, making it a renewable energy source. Long before you switch on a light at home or at work, the hydroelectric process has already begun.
How do dams generate electricity, or more specifically, how do they transform the energy of moving water into AC power?Water must flow in order to generate power. Kinetic energy is energy that moves. The energy transforms into mechanical (machine) energy as flowing water turns blades in a turbine.
To know more about hydropower visit :-
https://brainly.com/question/22258411
#SPJ4
A piece of stone is projected vertically upwards with a speed of 25ms^-1. Determine it's speed at it's point reached
Assuming a piece of stone is projected vertically upwards with a speed of 25ms^-1, its speed at its highest point reached is equal to zero (0) m/s.
What is projectile motion?In Science, projectile motion can be defined as a form of motion which is experienced by a physical object (body) that is projected near the surface of planet Earth, while moving along a parabolic path, and under the influence of a gravitational force (gravity) only.
Generally speaking, when this stone is thrown straight up or projected vertically upwards at a certain speed, it begins to slow down as a result of the effect of downward gravitational acceleration.
Consequently, the stone reaches a maximum height (highest point) where it cannot go higher anymore and then starts to fall down (descend) due to gravity.
In this context, we can reasonably infer and logically deduce that the speed of any physical object would be equal to zero (0) meter per seconds when it reaches a maximum height (highest point).
Read more on projectile motion here: brainly.com/question/10055273
#SPJ1
Complete Question:
A piece of stone is projected vertically upwards with a speed of 25 ms^-1. Determine its speed at its highest point reached. (g = 10 ms-2).
The speed of light in a certain glass is 1.91×10^8 meter per second. What is the refractive index of the glass?
Answer: 1.57
Explanation:
absolute refractive index = [tex]\frac{speed of light in air}{speed of light in a medium}[/tex]
[tex]= > \frac{3 * 10^{8} }{1.91* 10^{8} } \\= > 1.57[/tex]
1. a 1.4 x 103 kg car is westbound at a velocity of 37.0 km/h when it collides with a 2.0 x 103 kg truck northbound at a velocity of 35 km/h. if these two vehicles lock together upon collision, what is the initial velocity of the vehicles after collision? (7.2 m/s 37o w of n) 2. a 6.2 kg object heading north at 3.0 m/s collides with an 8.0 kg object heading west at 3.5 m/s. if these two masses stick together upon collision, what is their velocity after collision? (2.4 m/s 56o w of n) 3. a 4.0 x 104 n truck moving west at a velocity of 8.0 m/s collides with a 3.0x104 n truck heading south at a velocity of 5.0 m/s. if these two vehicles lock together upon impact, what is their velocity?(5.0 m/s 25o s of w)
The velocity of vehicles after the collision is 15.82m/sec if car mass is 1.4 × 10³kg and truck mass is 2×10³kg
We know that we need to conserve the momentum of watermelon in a certain direction. Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.
We know that momentum =mass × velocity
So,initial momentum of car is =1.4 × 10³kg × 37km/hr
Similarly,,initial momentum of truck=2×10³kg × 35km/hr
Now,it is given that both vehicles lock together,so total mass of both vehicles is =1.4 × 10³kg + 2×10³kg=3.4 ×10³kg
Assume final velocity of both vehicle is v
So,following the law of conservation,we get
=>1.4 × 10³kg × 37 + 2×10³kg × 35 = 3.4 ×10³ ×v
=>51.8 ×10³ + 2×10³=3.4×10³ ×v
=>53.8 ×10³ kg-m/sec = 3.4×10³ ×v
=>v = 53.8/3.4
=>v=15.82m/sec
Hence,final velocity of both vehicle after collision is 15.82m/sec.
To know more about velocity,visit here:
https://brainly.com/question/18084516
#SPJ4
what should the rotation curve for this galaxy look like for radii larger than 5 kpc, do you think? after 5kpc...
The rotation curve for this galaxy look like for raddi larger than 5kpc is angular velocity.
What is angular velocity?Angular velocity is the speed at which the angle between 2 bodies changed whenever an object rotated or revolvers around an axis. This displacements is depicted in the images by the angle firmed by a line on one body andar a line on the other.
Angular velocity can be defined as the Speed at which an item rotates or revolvers around an axis. The Greeks letter Omega (occasionally ) stands for angular velocity. The SI unit for angular velocity is radians per second because it is the expressed as an angle per unit of times.
Orbital speed increase with radius beacuse it is directly proportional to radius
Since V=wr
So on increasing with radius orbital speed also increases.
So here w is angular velocity.
To know more about angular velocity click-
https://brainly.com/question/20432894
#SPJ4
7. What is the weight of a ball with a mass of 0.77 kg? (hint: how fast is gravity?)
Answer:
While on the earth, any object with a mass of 0.77 kg weighs 7.546 newtons (1.698 pounds).
On the moon, the same 0.77-kg object would weigh 1.232 newtons (0.277 pound)
Explanation:
what is the formula to find the volume of a sphere
what is the change in internal energy of a system that takes in 4.23 106 j of heat, and does 4.50 105 j of work while dissipating 9.07 106 j of heat?
The change in internal energy of a system is - 5290×10⁴J.
What do you mean by internal energy?Innate strength A system's or a body's (with clearly defined boundaries) U is made up of the sum of the kinetic and potential energies resulting from molecular motion as well as the electric and vibrational motion of the atoms within molecules.
Heat transfer into the system Q₁ = 4.23×10⁶J
Heat transfer out of the system Q₂ = 9.07× 10⁶J
Work done W = 4.50×10⁵J
The heat transfer into the system less the heat transfer out of the system is now known as the net heat transfer.
Q = Q₁ - Q₂
Q = 4.23×10⁶ - 9.07× 10⁶
Q = -4.84× 10⁶J
The first law of thermodynamics provides the following formula for the change in internal energy:
ΔU = Q - W
ΔU = -4.84× 10⁶ - 4.50×10⁵
ΔU = - 5290×10⁴J.
A negative sign indicates a decrease in internal energy.
To know more about internal energy visit:
https://brainly.com/question/17000082
#SPJ4
two planets are identical, except planet x has an atmosphere of mostly nitrogen and planet y has an atmosphere of mostly carbon dioxide. what can you determine about the planets
Two planets are identical, except planet x has an atmosphere of mostly nitrogen and planet y has an atmosphere of mostly carbon dioxide therefore what we can determine about the planets is that x is Earth while y is Venus.
What is Atmosphere?This is referred to as the envelope of gases surrounding the earth or another planet and it makes life possible by providing different organisms with air to breathe
In the atmosphere of the planet Venus there is a high concentration of carbon dioxide as it is made up of it is made of 96.5% of CO₂ and a 3% of nitrogen.
On the other hand in the atmosphere of the planet Earth, there is a high concentration of nitrogen which is about 78% and is therefore the reason why they were chosen as the correct choices.
Read more about Atmosphere here https://brainly.com/question/24925283
#SPJ1
9) During a game of bowling, which of the following describe the ball's motion?(SELECT ALL ANSWERS THAT APPLY)
A) The ball is accelerated while it is pushed by the student's hand due to an
unbalanced force.
B) The ball slows down as it rolls because friction exerts an unbalanced force.
C) The ball is accelerated while it is held in the student's hand due to balanced
Forces.
D) The ball does not change its motion as it rolls because of the balanced force
provided by friction.
E) The ball does not change its motion while it is held in the student's hand due to
balanced forces.
Answer:
The answer seems to be,
A) The ball is accelerated while it is pushed by the student's hand due to an
A) The ball is accelerated while it is pushed by the student's hand due to anunbalanced force.
(The answer might be wrong. )
a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. How much work was done by the dog ?
The work done by the dog is 0.81J.
What is work done?Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.
It is said that no work is done if the object does not move.
The work done on an object is the amount of energy transferred to an object through work.
According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:
Force = mass × acceleration
Force = 0.75kg × 9.8m/s²
Force = 7.35N
Work done = 7.35N × 0.11m = 0.81J
Therefore, 0.81J is the work done by the dog.
Learn more about work done at: https://brainly.com/question/2750803
#SPJ1
one cannot peer all the way back and directly observe the big bang because the universe's density was so low. true false
True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.
One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.
To know more about redshift
https://brainly.com/question/13494718
#SPJ4
The diagram below represents a wave.
What is the speed of the wave if its wavelength is 3.0 m?
The speed of the wave is determined as 18 m/s.
option D is the correct answer.
What is the speed of the wave?
The speed of the wave is the rate of change of wave's displacement with time.
The speed of the wave is calculated by applying the formula relating speed, wavelength and frequency of the wave as shown below.
v = fλ
where;
v is the speed of the wavef is the frequency of the waveλ is the wavelength of the waveThe frequency of the wave is calculated as follows;
f = 1 / T
where;
T is the period of the waveThe period of a wave is the time taken for the wave to complete one cycle.
In the picture given, 3 cycles of the wave = 0.5 s
1 cycle of the wave = ?
= 0.5 s / 3
= 0.16667 s
f = 1 / T
f = 1 / 0.16667
f = 6 Hz
The speed of the wave is calculated as follows;
v = fλ
v = 6 Hz x 3 m
v = 18 m/s
Learn more about speed of wave here: https://brainly.com/question/2142871
#SPJ1
a small ferryboat is 4.70 m wide and 6.50 m long. when a loaded truck pulls onto it, the boat sinks an additional 3.70 cm into the river. what is the weight of the truck?
According to the given statement 11303.5 kg is the weight of the truck.
What does physics' Archimedes principle entail?The buoyant force, which applies to a person at rest in a fluid, is proportional to the weight of the displaced water and pushes higher. The amount of fluid displaced when the body is fully immersed is equal to the body's volume.
Briefing:The Archimedean principle, which asserts that the hydrostatic push is equal to the weight of the desalinated liquid, is used to solve this task.
B = ρ g V
It is in balance with the push when the truck is at full weight, according to Newton's law of equilibrium.
Σ F = 0
B-W = 0
B = W
body weight
W = M g
the volume is
V = l to h
(l to h) = M g
M = l a h
we calculate
M = F = 1000 . 10. (4.70 x 6.50 x 0.037) = 11303.5 N
M = 11303.5 kg
To know more about Archimedean visit:
https://brainly.com/question/1603482
#SPJ4
what force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2500 kg car (a big car) resting on the slave cylinder? the master cylinder has a 1.93 cm diameter, while the slave's is 24.9 cm. 1900 n 150 n 15 n 4.1e 06 n 74 n
The force that must be exerted on the master cylinder of the hydraulic lift to support the weight of car is 147.2 N .
The Pascal's Law states that the relation between the pressure , force and area is given as :
Pressure = Force/Area ;
given that the diameter of the master cylinder is = 1.93 cm ;
so radius of master cylinder = 1.93/2 = 0.965 cm = 0.00965 m ;
the diameter of slave cylinder is = 24.9 cm ;
the radius of the slave cylinder = 24.9/2 = 12.45 m = 0.1245 m ;
Area of slave cylinder (A₁)= π(0.1245)² = 0.0486 m²
Area of the master cylinder (A₂) = π(0.00965)² = 0.000292 m² ;
given mass of the car = 2500 Kg ,
the force exerted will be : F = m*a
F₁ = 2500*9.8 = 24500 N ;
F₁/A₁ = F₂/A₂
So , 24500/0.0486 = F₂/0.000292
F₂ = (24500/0.0486)×0.000292
F₂ = 147.2 N
Therefore , the force exerted on the master cylinder is 147.2 N .
Learn more about Force here
https://brainly.com/question/14114564
#SPJ4
a hockey puck is hit on a frozen lake and starts moving with a speed of 13.20 m/s. exactly 5.6 s later, its speed is 6.60 m/s. what is the puck's average acceleration?
-1.17 is the average acceleration when a hockey puck is hit on a frozen lake and starts moving with a speed of 13.20 m/s. Perfectly,5.6 s later, its speed is 6.60 m/s.
What is an average acceleration?The rate of change in velocity, or the change in velocity per unit time, is known as average acceleration. The square of the distance over time is used to measure acceleration. Hence, the unit of acceleration is known to be as m/[tex]s^{2}[/tex]. Average is read as a symbol with a bar over it, so a-bar represents average acceleration.Solution:Given:
Initial sped =13.20m/sFinal speed=6.60m/stime taken=5.6sNow, to find the average acceleration we use the following formula;
Acceleration, [tex]a_{avg}[/tex] =[tex]\frac{v^{final}-v^{initial} }{time}[/tex]
⇒[tex]a_{avg}[/tex]=6.60-13.20/5.6 = -1.17m/[tex]s^{2}[/tex]
Hence, -1.17 is the average acceleration when a hockey puck is hit on a frozen lake and starts moving with a speed of 13.20 m/s. Perfectly, 5.6 s later, its speed is 6.60 m/s.
To know more about acceleration visit
https://brainly.com/question/9095533
#SPJ4
What will happen to the pitch when a car with a blowing horn is approaching, according to the doppler effect?
Answer: The sound will increase in pitch.
Explanation:
According to the Doppler Effect, sounds will increase in pitch as they are nearing the listener, and then decrease in pitch as the sound moves further away. This is because when sound waves travel a shorter distance, the waves are more compact (higher frequency), producing a higher pitch. The further a listener is from the sound, the lower the pitch because the sound waves are more spread apart (lower frequency).
100 POINTS AND BRAINLIEST IF YOU CAN ANSWER
On a position vs. time graph for an object, a horizontal line segment indicates that the object is
A. at its starting location.
B. not moving and is at rest.
C. located at ground level.
D. moving at a constant rate.
Answer:
The answer is D. moving at a constant rate.
Explanation:
I've had this question before.
In the position-time graph, the horizontal line segment indicates that the object is not moving and is at rest. Therefore, option (B) is correct.
What is the Position Time Graph?The position vs time graph on which the instantaneous position of a particle is plotted on the y-axis and the time is plotted on the x-axis is called the Position-Time graph.
In the position vs time graph always take an independent variable on the x-axis and dependent variables must be plotted on the y-axis. Through mathematical function, the dependent variable will be dependent on the independent variable.
In the case of the Kinematic equation of uniform acceleration, the position can be defined as a dependent variable and time will be the fundamental independent variable.
The case of the horizontal line in the position vs. time graph indicates that the position of the object is not changing with time so it is at rest.
Learn more about position vs. time graph, here:
https://brainly.com/question/11290682
#SPJ2
an object in shm oscillates with a period of 4.0 s and an amplitude of 16 cm. part a how long does the object take to move from x
The object takes to move is 0.409s.
Calculaiton:
time period T = 4 s
Angular speed ω = 2π/T= 1.57 rad/s
SHM equation
x = A sin ωt
6 = 10 sin(1.57t)
sin(1.57t) = 0.6
1.57 t = 0.6435
t= 0.409s.
The amplitude of a periodic variable is a measure of its change over one period. The amplitude of an aperiodic signal is its magnitude relative to a reference value. Amplitude has various definitions, all of which are functions of the magnitude of the difference between extreme values of a variable. It refers to the maximum displacement from equilibrium exhibited by a body in periodic motion.
Learn more about The amplitude here:- https://brainly.com/question/3613222
#SPJ4
calculate the height of the coulomb barrier for the head-on collision of two deuterons. take the effective radius of a deuteron to be 2.1 fm.
The nuclear force between two charged particles is attractive, but Coulomb repulsion prevents two charged particles from getting close enough to interact. (K= 170 keV.)
How to fix it?We consider the value of the initial kinetic energy K that each deuteron must possess in order for them to come to rest when their surfaces meet to be the height of the Coulomb barrier.
if r is a deuteron's radius, then by the law of conservation of energy, we get,
2K=1/4πϵo. e²/2r
putting values, we get
K= 1/4πϵo. e²/4r=9x10^9x1.6x10^-19/4x2.1x10^-15=2.75x10^-14 J = 170 keV.
How can the height of a potential barrier be determined?J is the potential energy. Divide it by the electron charge, or 1.6 x 1019C, to convert it to eV. Consequently, the 360keV potential barrier height for a head-on collision of two deuterons. In this work,
What is the calculation for height?5 feet, 6 inches, or 66 inches, is the height of a human. 2.54 centimeters make up one inch (cm). Therefore, to convert your height from inches to centimeters, just multiply it by 2.54. The metric equivalent of a person who is 5 feet, 6 inches tall in this instance is 167.64 cm (66 x 2.54).
Learn more about coulomb here:
https://brainly.com/question/15167088
#SPJ4
it’s actually 7th grade science no physics pls answer it’s a lot of points
What do the historical communication technologies in these photos have in common?
(pictures are shown below)
All the tools of communication such as the drum, telegraph et cetra were used for emergency communication.
What is communication?We know that communication has to do with the art of sending and receiving information between two people who may or may not be at the same place. We know that the dissemination of information is a very important aspect of life and we have always tried to invent means of communication especially at times when we have an emergency situation that needs a kind of an immediate remedy.
We can see that all the kinds of communication gadgets that have been show here are all from a period that is far behind the kind of civilization that we have to day and the kind of thge communication gadgets that are quite available to the people that are around today.
However, all the tools shown could be used to send information in times of emergency.
Learn more about communication:https://brainly.com/question/14288895
#SPJ1
I NEED HELP ASAP PLSS
Answer:
C.) The United States would become less dependent on energies that emit greenhouse gases.
Explanation:
If nuclear energy increased, it would occupy a larger piece of the pie chart. The prompt states that the usage of non-fossil fuel-based forms of energy would remain constant. This condition means that nuclear energy would decrease the percentage of fossil fuel-based energy used. Energy production through the use of fossil fuels necessarily produces greenhouse gases such as CO2. An increase in nuclear energy would mean a corresponding decrease in dependence on greenhouse gas-producing fossil fuels.
5. if the star sirius emits 23 times more energy than the sun, why does the sun appear brighter in the sky? include the terms luminosity and apparent brightness in your response.
The star Sirius is indeed brighter but our Sun appears to be brighter because it is closer to us.
The intrinsic luminosity of Sirius is exactly 25.4 times more than the sun but if we compare the distances of these stars, Sirius is 8.6 light years away from us and the Sun is just 8 light minutes away from us. This marks the obvious reason why our Sun appears more bright.
Even mathematically, it can be justified as the apparent brightness of any luminous object depends on the inverse square of the distance of that luminous object. Therefore the sun's light energy dominates our sky and we can't see any traces of Sirius from the earth.
Learn more about the star Sirius on
https://brainly.com/question/15851246?referrer=searchResults
#SPJ4
a car accelerates uniformly from rest to 25 m/s over a distance of 30 meters. what is the acceleration of the car?
Answer:
a=25/24 m/s^2
Explanation:
I’m going to assume you mean the final velocity is 25m/s.
v^2=u^2+2as
625=0+2a300
a=25/24 m/s^2 or 1.0416^_ (period 1) ^m
if the sound wave lasts 4 seconds, how much distance did it travel? (please help me)
Answer:
A wave is a disturbance that moves along a medium from one end to the other. If one watches an ocean wave moving along the medium (the ocean water), one can observe that the crest of the wave is moving from one location to another over a given interval of time. The crest is observed to cover distance. The speed of an object refers to how fast an object is moving and is usually expressed as the distance traveled per time of travel. In the case of a wave, the speed is the distance traveled by a given point on the wave (such as a crest) in a given interval of time. In equation form,If the crest of an ocean wave moves a distance of 20 meters in 10 seconds, then the speed of the ocean wave is 2.0 m/s. On the other hand, if the crest of an ocean wave moves a distance of 25 meters in 10 seconds (the same amount of time), then the speed of this ocean wave is 2.5 m/s. The faster wave travels a greater distance in the same amount of time.
Explanation:
Answer:170
Explanation: 0.50
can also be written as
1
2
.
0.50
seconds is half of a second.
if the wave travels
340
m
every second, it will travel half of that distance in
0.50
seconds.
340
⋅
1
2
=
340
2
=
170
in half of a second, the wave will have travelled
170
metres away from its source.