Answer:
Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.
Six members of a synchronized swim team wear earplugs to protect themselves against water pressure at depths, but they can still hear the music and perform the combinations in the water perfectly. One day, they were asked to leave the pool so the dive team could practice a few dives, and they tried to practice on a mat, but seemed to have a lot more difficulty. Why might this be
Answer:
The sound travels differently in different medium according the density of the medium.
Explanation:
The sound travels faster in dense medium and can be heard by the vibration of the bone present in the ear. The ear plugs reduce the sound intensity in both medium water and on land (air).
In air the sound is not heard properly due to the earplugs that stops the as the vibration are not able to produce as sound is not able to reach to middle ear, but Navy researchers have discovered that sound under water is heard by the bone present behind the ear, vibrations mastoid.
It takes Serina 1.72 hours to drive to school. Her route is 47 km long. What is Serina's average speed on her drive to school? Your Answer :
Explanation:
Average speed = distance / time
v_avg = 47 km / 1.72 hr
v_avg = 27.3 km/hr
On a frictionless air track, a 0.30 kg glider moving at 0.40m/s to the right collides with a stationary 0.80kg glider moving at 0.15 m/s to the left. The collision is cushioned by a bumper made of perfectly elastic spring steel. a. What is the velocity of each glider after the collision? b. What is the minimum amount of total kinetic energy during the collision? c. Where is the missing energy?
Answer:
Explanation:
It is the case of perfectly elastic collision . So we shall apply formula of velocity after collision as follows .
Let m₁ and m₂ be the mass colliding with velocity u₁ and u₂ and their velocity become v₁ and v₂ after collision .
[tex]v_1=\frac{(m_1-m_2)u_1 }{m_1+m_2)} +\frac{2 m_2u_2}{(m_1+m_2)}[/tex]
Putting the values
[tex]v_1=\frac{ (.30-.80).40 }{( .30+.80)} +\frac{2\times .80\times(-.15) }{(.30+.80 )}[/tex]
= - 0.4 m /s
So direction of .30 kg mass will be reversed .
[tex]v_2=\frac{ ( m_2-m_1) u_2 }{( m_1+m_2)} +\frac{2 m_1u_1}{(m_1+m_2)}[/tex]
putting the values
[tex]v_2=\frac{ ( .80-.30)(-.15) }{( .30+.80)} +\frac{2 \times.30\times.40}{(.30+.80)}[/tex]
= .15 m /s
The direction of .80 kg will become from left to right ie its direction will be reversed .
b ) Minimum amount of kinetic energy will be at the position when they move with common velocity
common velocity
v = .3 x .4 - .8 x .15 / (.3 + .8)
= 0
c )
Missing energy is stored as elastic potential energy in the spring .
Matter must have two physical properties 1. Have mass, and 2
∆ Must move
∆ Use energy
∆ Take up space
∆ Be measure
able
Answer:
Take up space
Explanation:
Actually we know this by the definition of matter which states that "matter is any substance that has mass and takes up space by having volume."
hope it helped you:)
Help!!! Line B touches the circle at a single point. Line A extends through the center of the circle.
I. What is line b in reference to the circle?
2. How large is the angle between lines A and B?
Answer:
If I understand correctly. Line B is parallel to the circle. Also, the angle is less than 90.
The size of the circle determines. The diameter should not be fixed either.'Circle' is characterized as "a two-dimensional geometric figure comprising of the set of all those points in a plane that are at equal distance from the center."
1). Line B would be considered as the 'tangent' in association with the given circle.
2). The angle lying among the lines A and B would be of 90° i.e. right angle.
Given that,
A circle with line A drawn through its center
Line B moves while touching the edge of the circle and intersects line A outside the circle.
Since 'Tangent' is described as a 'straight-line touching the curve at one point without crossing it,' thus, line B would be considered as the tangent of the circle as it touches the circle's curve once. The angle that is formed at the intersection of the line A and B at the curve of the circle would be a right angle because they are perpendicular to one another. Thus, the perpendicular lines A and B form an angle of 90°.Learn more about 'circle' here:
brainly.com/question/11833983
What two factors determine how much potential energy an object has?
Answer:
The mass of the object and its height in the gravitational field of the Earth.
Explanation:
If we are talking about gravitational potential energy which is defined as:
[tex]U=m\,*\,g\,*\,h[/tex]
being "m" the object's mass, "g" the acceleration due to gravity, and "h" the height at which the object is located relative to the conventionally picked level for zero of potential energy.
As long as the value of "g" is constant, the only two variables that determine the gravitational potential energy are the mass (m) of the object and its relative height (h).
Answer:
The objects weight and height above Earth's surface
Explanation:
K12 :)
Dennis throws a volleyball up in the air. It reaches its maximum height 1.1\, \text s1.1s1, point, 1, start text, s, end text later. We can ignore air resistance. What was the volleyball's velocity at the moment it was tossed into the air?
Answer:
If max height = 1.1 meters, then initial velocity is 3.28 m/s
If max height is 1.1 feet, then the initial velocity is 5.93 ft/s
Explanation:
Recall the formulas for vertical motion under the acceleration of gravity;
for the vertical velocity of the object we have
[tex]v=v_0-g \,t[/tex]
for the object's vertical displacement we have
[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2[/tex]
If the maximum height reached by the object is given in meters, we use the value for g in [tex]m/s^2[/tex] which is: [tex]9.8\,\,m/s^2[/tex]
If the maximum height of the object is given in feet, we use the value for g in [tex]ft/s^2[/tex] which is : [tex]32\,\,ft/s^2[/tex]
Now, when the ball reaches its maximum height, the ball's velocity is zero, so that allows us to solve for the time (t) the process of reaching the max height takes:
[tex]v=v_0-g \,t\\0=v_0-g \,t\\g\,\,t=v_0\\t=\frac{v_0}{g}[/tex]
and now we use this to express the maximum height in the second equation we typed:
[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2\\max\,height=v_0\,(\frac{v_0}{g}) - \frac{g}{2} \,(\frac{v_0}{g})^2\\max\,height= \frac{v_0^2}{2\,g}[/tex]
Then if the max height is 1.1 meters, we use the following formula to solve for [tex]v_0[/tex]:
[tex]1.1= \frac{v_0^2}{2\,9.8}\\(9.8)\,(1.1)=v_0^2\\v_0=10.78\\v_0=\sqrt{10.78} \\v_0=3.28\,\,m/s[/tex]
If the max height is 1.1 feet, we use the following formula to solve for [tex]v_0[/tex]:
[tex]1.1= \frac{v_0^2}{2\,32}\\(32)\,(1.1)=v_0^2\\v_0=35.2\\v_0=\sqrt{35.2} \\v_0=5.93\,\,ft/s[/tex]
Answer:
11
Explanation:
for khan academy, this is the answer
Which term describes the ability to process many things simultaneously?
O Effortful processing
O Parallel processing
O Mood congruent memory
O Flashbulb memory
O Working memory
Answer:
Parallel processing
Explanation:
It is a parallel processing because it involves the brain processing many part of problem simultaneously.
The brain natural mode of information involves performing many task .
It is also ability of the brain to simultaneously process incoming stimuli or signals of different quality. It is a part of brain's vision and divide what is seen into four major parts which are color, motion, shape, and depth.
Answer: B) Parallel processing
please help ASAP.
these are examination questions ..
no nonsense answers .
i will mark as brainliest if you got it correct .
Answer:
1st question c part
2nd question c part
A construction worker uses an electrical device to attract fallen nails and sharp objects
from a construction site. What is causing the attraction of the metal objects?
O An electrical wave oscillating perpendicular to the electrical device.
O An electrical charge radiating perpendicular to the wire
O Amagnetic wave radiating perpendicular to an electrical device
O A magnetic wave and electrical current moving in opposite directions
Answer:
is the last one, a magnetic wave and electrical current moving in opposite directions
Explanation:
opposite directions always attract in magnetic waves and fields
the unit of energy is a derived unit
Explanation:
Hi, there!!
Energy is defined as the capacity or ability to do work. It's SI unit is Joule.
here,
Joule = (kg×m×m)/(s×s)
= kg×m^2/s^2.
Therefore, the derived unit is kg.m^2 by s^2.
Hope it helps...
A bicycle has a momentum of 36 kg • m/s and a velocity of 4 m/s. What is the mass of the bicycle? 9 kg 32 kg 40 kg 144 kg
Answer:
9 kg
Explanation:
Momentum is mass times velocity.
p = mv
36 kgm/s = m (4 m/s)
m = 9 kg
The mass of the bicycle is 9 kg.
Momentum of the bicycle
The momentum of the bicycle is the product of mass and velocity of the bicycle.
P = mv
where;
P is momentumm is mass v is velocitym = P/v
m = 36/4
m = 9 kg
Thus, the mass of the bicycle is 9 kg.
Learn more about momentum here: https://brainly.com/question/7538238
A 1.00-kg glider attached to a spring with a force constant 25.0 N/m oscillates on a frictionless, horizontal air track. At t = 0, the glider is released from rest at x = -2.80 cm (that is, the spring is compressed by 2.80 cm). (a) Find the period of the glider's motion. How does the period depend on the mass and the spring constant? Does it depend on the amplitude of oscillation? s (b) Find the maximum values of its speed and acceleration. speed m/s acceleration m/s2 (c) Find the position, velocity, and acceleration as functions of time. (Where position is in m, velocity is in m/s, acceleration is in m/s2, and t is in s. Use the following as necessary: t.) x(t) = v(t) = a(t) =
Answer:
a) T = 1.26 s , b) v_max = 0.14 m / s , a_max = 0.7 m / s²
c) x = 0.028 cos (5 t) , v = - 0.14 sin 5t, a = - 0.7 cos 5t
Explanation:
This is a simple harmonic motion exercise that is described by the equation
x = A cos (wt +Ф)
with
w = √ (k / m)
let's apply this expression to our case
a) Angular velocity is related to frequency
w = 2π f
frequency and period are related
f = 1 / T
we substitute
2π / T = √ (k / m)
T = 2π √(m / k)
let's calculate
T = 2π √(1/25)
T = 1.26 s
In the expression for the period, the amplitude does not appear, therefore there is no dependence, as long as Hooke's law is fulfilled, which is correct for small amplitudes.
b) in the initial equation we have the position as a function of time, let's use the definition of speed and acceleration
v = dx / dt
v = - A w sin (wt + Ф)
the speed is maximum when the sine is -1
v_max = A w
w = √ (k / m)
w = √ 25/1
w = 5 rad / s
the amplitude of the movement is equal to the maximum compression of the spring
A = 2.8 cm = 0.028 m
we substitute
v_max = 0.028 5
v_max = 0.14 m / s
acceleration
a = dv / dt
a = - A w² cos (wt + Ф)
the acceleration is maximum when the cosine is -1
a_max = A w²
let's calculate
a_max = 0.028 5²
a_max = 0.7 m / s²
c) let's start by finding the phase constant
v = -A w cos (wt + Ф)
at t = 0 they indicate that the system has v = 0
0 = -A w sin (0 + Ф)
Ф = sin⁻¹ 0
Ф = 0
we write the equation
x = 0.028 cos (5 t)
v = - A w sin (wt + Ф)
v = - 0.028 5 sin (5t + 0)
v = - 0.14 sin 5t
acceleration
a = - A w² cos (wt + Ф)
a = - 0.028 5 2 cos (5 t + 0)
a = - 0.7 cos 5t
if a direction is somewhere between North and East it is measured in _____?
Answer:
degrees
Explanation:
If a direction is somewhere between north and east, it is measured in degrees.
This measurement will be possible thanks to the existence of geographical coordinates that are some 'imaginary lines' that help us find our location on the earth's surface. These lines are called latitude and longitude, both of which are measured in degrees.
It is like a sea battle game where you have to combine the rows and columns in order to identify where the targets are located. Geographic coordinates work the same way, you must combine the rows and columns of the planisphere to identify the locations of the planet. So the lines would be the latitudes and the columns the longitudes.
I need help pls now plleeeeeeeeaaassseeeee
Answer:
[tex]r = \frac{v}{i} = v = ri \\ i = \frac{v}{r} [/tex]
whats suface tension
Answer: "Surface tension is a film of a liquid caused by the attraction of the particles in the surface layer by the bulk of the liquid, which tends to minimize surface area."
Hope this helps!
Answer:
Explanation:
Surface tension is the property of a liquid surface. It is an effect where the surface of the liquid is strong.
example - small insects can walk on water as they do not have enough weight to penetrate it.
This image might help you
Hope it helps
plz mark as brainliest!!!!!!!
An average family of four uses roughly 1200 Liters of water per day (1L. - 1000 cm3). A lake that covers 50 km² with a uniform depth and
supplies water to a local town with a population of 40,000 people would lose depth every year due to water consumption form
the locals, Ignore evaporation, rain, creeks and rivers.
Answer:
#_total = 4.38 10⁹ liter
Explanation:
For this exercise we can use a direct proportion rule (rule of three). If 4 people use 1200 liters how much water 1 person consumes
#_water = 1 person (1200 liter / 4 person)
#water = 300 liters
Now we look for the consumption of this person in a year, if 1 person consumes 300 liters 1 day, how many liters they consume in a year (365 days)
#_water_person_total = 365 days (300 liters / 1 day)
#_water_person_total = 109500 liters
This is the water consumption of 1 person in a year, the total of 40000 people how much they consume
#_total = 40000 person (109500 liter / 1 person)
#_total = 4.38 10⁹ liter
Match the following:
Tailored software
. Utility software
Operating system
Software
Packaged software
Set of programs
Library management system
Scan viruses
Microsoft Office
used to coordinate the hardw
the computer
Answer:
1) Tailored software Library management system
2) Utility software Scan viruses
3) Operating system Used to coordinate the hardware of the computer
4) Packaged software set of programs Microsoft office
Explanation:
1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation
2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks
3) Operating system software
The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer
4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.
Which waves move fast Longitudinal waves or Transverse waves and why???
Answer:
Transverse wave
Explanation:
Its because in transverse wave the particle displacement is perpendicular to the direction of wave propagation..hope it helps you...
You are hiking in a canyon and you notice an echo. You decide to let out a yell and notice it took 2 seconds before you heard the echo of your yell. How far away is the canyon wall that reflected your yell
Answer:
d = 343 m
Explanation:
Given that,
You notice that an echo took 2 seconds before you heard the echo of your yell.
We need to find that how far away is the canyon wall that reflected your yell. It means we need to find the distance.
The distance covered by an object is given by :
d = v × t
v is speed of sound in air, v = 343 m/s
The sound took 1 s to reach the wall and 1 s back to you.
It means that,
d = 343 × 1
d = 343 m
So, canyon will reflect your yell at a distance of 343 m
Ken received a 66 on his first math exam, which counted for 20% of his final grade; he now believes that he won't be able to pass the class. His conclusion best illustrates a pessimistic outlook. the fight-or-flight response. problem-focused coping. relative deprivation.
Answer:
His conclusion best illustrates a pessimistic outlook.
Explanation:
As seen in the question above, Ken got 20% of his final grade in the first test he did for this class, that is, there will be other tests that can provide him to reach the grade needed to pass the class. However, even if there are possibilities, he believes that he will not pass the class, he does not have a positive and optimistic view of his future in this class and is sure that he will fail. This negative view of the future is an example of a pessimistic outlook.
Jaiden is writing a report about the structure of the atom in her report,she says that the atom has three main parts and two subatomic particles. Do you agree with her?why or why not
Answer:
I do not agree with the answer.
Because in reality, the atom has 2 main parts and 3 subatomic particles.
Explanation:
The parts of an atom are:
- The crust: It is the outer part of the atom and is the place where the electrons are.
- The nucleus: It is the central part of the atom and is the place that contains the protons and neutrons.
The subatomic particles of the atom are:
- Electrons: They are negatively charged particles that go in the atom's crust and are divided into specific sections.
- Protons: They are particles with a positive electric charge, the number of protons in the nucleus of an atom is what determines the atomic number of an element.
- Neutrons: They are atoms with no electric charge.
Question is on the picture. Answers: A. 0.1 J/g*C B. 0.2 J/g*C C. 0.4 J/g*C D. 4 J/g*C
Answer:
B. 0.2 J/g/°C
Explanation:
The solid phase is the first segment (from 0°C to 50°C).
q = mCΔT
200 J = (20 g) C (50°C)
C = 0.2 J/g/°C
fill in the blanks
1.)Seed drill is used for ____ of the seeds.
2.)ploughing helps the_____of roots of the growing plants.
3.)Tilling of the soil is also called a ________.
4.)Manure and fertilizers are use ti maintain the______of the soil.
5.)A most common weedicide is________.
6.)After harvesting,grains are separated from the chaffand hay by _______ or by using ______.
7.)The economial methods of irrigation are_____and____.
8.)The wild plants which grow along with the main crop are called_________.
9.) Shifting of tiny plants from a nursery to the main field is called______.
10.) Excess water and wet soil do not permit proper_____of the seeds or roots of the plants.
Answer:
1.) Sowing
2.) Respiration
3.) Soil preparation or cultivation or ploughing
4.) Fertility
5.) 2, 4 -D
6.) winnowing threshers
7.) Surface irrigation and sprinkler irrigation
8.) Weeds
9.) Transplantation
10.) Aeration
Explanation:
1.) Seed drill sows crop seed
2.) Ploughing assist in the respiration and penetration of the roots of a growing plants
3.) Tilling the soil is breaking of the soil lumps and turning of the soil
4.) Manure and fertilizers supply nutrient to the soil for the uptake by plant in food production
5.) 2, 4 -D are a range of weedicide containing 2,4-D as the active ingredient
6.) Winnowing is the separation of grain from straw
Threshers remove seeds from husks and stalks
7.) Surface irrigation -gravity enables the flow of the water
and sprinkler irrigation- Use of preset tools for irrigation
8.) Weeds are the unwanted, in situ, growing plants close to the crops
9.) Transplantation is the method of relocating plants
10.) Excess water limits access of the roots and seeds to atmospheric oxygen
calculate the power of an engine which can supply 60kg of energy per minute
Answer:
1 Watt
Explanation:
Power (P) = w / Δt
w = work done
Δt = change in time
Power (P) = 60kg / 60 seconds
Power (P) = 1 Watt
Shortly after receiving a traffic ticket for speeding, Fred made numerous comments about the road signs being inadequate and is GPS telling him a different speed limit. This would be an example of:
Answer:
External locus of control
Explanation:
External locus of control is an attitude people possess that makes them attribute their failures or successes to factors other than themselves. The opposite of this type of attitude is the Internal locus of control where the individuals take responsibility for the outcomes of their actions whether good or bad. One good thing about the external locus of control is that when the individuals with this characteristic record successes, they attribute it to others and this presents them as people with team spirit. However, when they record failures, they do not want to take the blame, but rather attribute it to others.
Fred exhibits an external locus of control because he attributed his speeding to other factors like the road signs and GPS instead of fully admitting that it was his fault.
The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, ℓ, what combination of g and ℓ must the period be proportional to? (Acceleration has SI units of m • s-2.)
Answer: √(L/g)
Explanation:
Here we only work with the units:
The unit of the period is units of time, so we have:
[T] = [s]
Now, the units of the length of the pendulum are units of distance:
[L] = [m]
And the units of the acceleration are:
[g] = [m/s^2]
Now, we want to work with those two in such way that the end result is only in seconds.
First, we can see that in g we have seconds square, so we know that we should use a square root.
Then we can divide L by g in order to remove the distance unit, and to have the time unit in the numerator
[L/g] = [m*s^2/m] = [s^2]
Now we apply the square root:
[√(L/g)] = [√s^2] = [s]
Then the combination is: √(L/g)
T = k*√(L/g)
where k is the constant of proportionality.
Which of the following best describes a consumer?
0. a business owner who sells clothes
0. someone who studies economics
O. a farmer who sells his crops
O. a person who buys goods and services
Answer:
a business who buys goods and services
Which of the following illustrates an increase in potential energy? Group of answer choices a wind-up toy winding down a person climbs a set of stairs an apple dropping from a tree a firecracker explodes
Answer:
A person climbs a set of stairs
Explanation:
Potential energy is said to be possessed by an object due to its position. As the height from the ground level increase, the potential energy increases. It is calculated by the below formula as :
P = mgh
Out of the given options, the option that illustrates an increase in potential energy is option (b) i.e. a person climbs a set of stairs. As he steps one stair, its position from ground increases. It means its potential energy increases.
You are the driver of the car in the photos above. You Are traveling at 30 mph when suddenly the car goes from its position in the first photo to the position in the second photo. What is happening
Answer:
the car uses teleportation, to zip to one side of the photo, to the other
Explanation:
