Describe the error in finding the distance between A(6, 2) and B(1,−4)

The solution to the system of equations is (x, y) = (1, -1) where the given equations are 11x+9y=-20 and x=-5y-6.

The substitution method is a technique used in algebra to solve systems of equations by replacing one variable with an expression containing another variable. The goal is to eliminate one of the variables so that we can solve for the other one.

We are given the following system of two equations with two variables:

11x + 9y = -20 (equation 1)

x = -5y - 6 (equation 2)

To solve the system using the substitution method, we need to solve one of the equations for one of the variables, and then substitute the expression for that variable into the other equation. Let's solve equation 2 for x:

x = -5y - 6

Now we can substitute this expression for x into equation 1, and solve for y:

11x + 9y = -20

11(-5y - 6) + 9y = -20 (substituting x = -5y - 6)

-55y - 66 + 9y = -20

-46y = 46

y = -1

Now that we have found y = -1, we can substitute this value back into equation 2 and solve for x:

x = -5y - 6

x = -5(-1) - 6

x = 1

Therefore, the solution to the system of equations is (x, y) = (1, -1).

To know more about substitution method visit:

https://brainly.com/question/14619835

#SPJ1

The order from the greatest number of triangles to the smallest is: Condition A, Condition B, Condition C.

According to the Triangle Inequality Theorem, any two triangle sides' sums must be bigger than the length of the third side.

The triangle inequality theorem can be used to determine the order of the greatest to smallest triangle.

Condition A: Under this condition, we have two sides with lengths 5 and 6, and their angle is 50°. Using these requirements, we may create two separate triangles since 5 + 6 = 11, which is more than the third side.

Condition B: This condition results in a right triangle with a third angle that is 90° and two sharp angles that measure 40° and 50°. According to the Pythagorean theorem, the triangle's two legs must be 30 and 40 inches long, respectively, meaning that the hypotenuse must be 50 inches long. We can only create one triangle as a result.

Condition C: This condition provides us with three sides that are 4, 5, and 9 lengths long. Any two sides must have a length total larger than the third side in order for a triangle to be formed. The three sides provided, however, do not satisfy this since 4 + 5 = 9. Hence, under these circumstances, a triangle cannot be formed.

Learn more about triangle inequality theorem here:

https://brainly.com/question/1163433

#SPJ1

The estimated annual income can be calculated using the equation above. If the data point is used to calculate the slope and y-intercept of the regression line, then the annual income can be estimated using the equation y = m(14) + b.

If the education level is 14 years,

To create a simple linear regression model using education level as the independent variable, you will need to input data for education level and annual income.

This data can be used to estimate the annual income for any given education level. The equation for this linear regression model is y = mx + b, where y represents the annual income, m is the slope of the line, x is the education level, and b is the y-intercept.

for such more questions on  annual income

https://brainly.com/question/28185992

#SPJ11

The Z-score of the interval within standard deviations of the mean for a normal distribution contains 87% of the probability is 1.11 (rounded to two decimal places).

To find the z-score such that the interval within standard deviations of the mean for a normal distribution contains 87% of the probability, we need to use the standard normal distribution table (Z-table) or a calculator that has the inverse normal function.

The standard normal distribution is a normal distribution with a mean of zero and a standard deviation of 1. It is denoted by the letter Z. Z-scores measure the number of standard deviations a data point is from the mean of the data set. A positive Z-score indicates a data point is above the mean, while a negative Z-score indicates a data point is below the mean.

To find the Z-score such that the interval within standard deviations of the mean for a normal distribution contains 87% of the probability, we first need to find the probability that is outside the interval. Since the interval is within standard deviations of the mean, we can use the empirical rule or the 68-95-99.7 rule to find the probability that is outside the interval.

The 68-95-99.7 rule states that 68% of the probability lies within 1 standard deviation of the mean 95% of the probability lies within 2 standard deviations of the mean 99.7% of the probability lies within 3 standard deviations of the mean. Since we are interested in the interval within standard deviations of the mean that contains 87% of the probability, we can assume that the interval is 1 standard deviation away from the mean.

Using the 68-95-99.7 rule, we can find the probability that is outside the interval:

100% - 68% = 32%

Since the probability that is outside the interval is 32%, we want to find the Z-score that corresponds to the probability of 16% on either side of the mean. We use the Z-table or a calculator that has the inverse normal function to find the Z-score that corresponds to a probability of 0.16.

From the Z-table, the Z-score that corresponds to a probability of 0.16 is 1.11 (rounded to two decimal places).

You can learn more about probability at: brainly.com/question/11234923

#SPJ11

Answer: 3/5

hope this helped you. Please brainliest! :D

Step-by-step explanation: If I am wrong tell me :D

Therefore, the smallest positive integer with at least 8 odd factors and at least 16 even factors is N = 1800.

In mathematics, combination is a way to count the number of possible selections of k objects from a set of n distinct objects, without regard to the order in which they are selected.

The number of combinations of k objects from a set of n objects is denoted by [tex]nCk[/tex] or [tex]C(n,k),[/tex] and is given by the formula:

[tex]nCk = n! / (k! *(n-k)!)[/tex]

where n! denotes the factorial of n, i.e., the product of all positive integers up to n.

by the question.

Now, let's consider the parity (evenness or oddness) of the factors of N. A factor of N is odd if and only if it has an odd number of factors of each odd prime factor of N. Similarly, a factor of N is even if and only if it has an even number of factors of each odd prime factor of N. Therefore, the condition that N has at least 8 odd factors and at least 16 even factors can be expressed as:

[tex](a_{1} +1) * (a_{2} +1) * ... * (an+1) = 8 * 2^{16}[/tex]

Let's consider the factor 2 separately. Since N has at least 16 even factors, it must have at least 16 factors of 2. Therefore, we have a_i >= 4 for at least one prime factor p_i=2. Let's assume without loss of generality that p[tex]1=2[/tex] and [tex]a1 > =4.[/tex]

Now, let's consider the remaining prime factors of N. Since N has at least 8 odd factors, it must have at least 8 factors that are not divisible by 2. Therefore, the product (a2+1) * ... * (an+1) must be at least 8. Let's assume without loss of generality that n>=2 (i.e., N has at least three distinct prime factors).

Since a_i >= 4 for i=1, we have:

[tex]N > = 2^4 * p2 * p3 > = 2^4 * 3 * 5 = 240[/tex]

Let's now try to find the smallest such N. To minimize N, we want to make the product (a2+1) * ... * (an+1) as small as possible. Since 8 = 2 * 2 * 2, we can try to distribute the factors 2, 2, 2 among the factors (a2+1), (a3+1), (a4+1) in such a way that their product is minimized. The only possibility is:

[tex](a2+1) = 2^2, (a3+1) = 2^1, (a4+1) = 2^1[/tex]

This gives us:

[tex]N = 2^4 * 3^2 * 5^2 = 1800[/tex]

To learn more about distribute:

https://brainly.com/question/29062095

#SPJ

The value of μV is 40 cm³.

Given,The area of bottom of cylindrical container = 10 cm²The height of container = h = Mean height = 4 cm Standard deviation of height = σ = 0.2 cm We are supposed to find the mean volume of fluid in the container.In order to calculate the mean volume, first we need to calculate the volume of fluid in the container.Volume of a cylindrical container = πr²h Where, r is the radius of the base of the container.So, we need to calculate the value of r.The area of the bottom of the container is given as 10 cm².

We know that the area of the base of a cylinder is given as:Area of base of cylinder = πr² We are given that area of the base is 10 cm². So,10 = πr²r² = 10/πr = √(10/π) We can find the volume of fluid using the values we have.Volume of fluid = πr²h = π(√(10/π))² x 4 = 40 cm³We know that mean volume, μV is given as:μV = πr²μh So, we need to calculate the value of μh. We know that standard deviation σh is given as:σh = 0.2 cm So,μh = h = 4 cm So,μV = πr²μh = π(√(10/π))² x 4 = 40 cm³

Learn more about Area

brainly.com/question/27683633

#SPJ11

In this particular question, we are being asked to find the number of normal subgroups of order 7 in a group of order 14. Before we begin, let's try to understand the different types of subgroups.Subgroups can be of two types: Proper Subgroups and Improper SubgroupsProper Subgroups are defined as subgroups which have more than one element and not equal to the entire group. Improper Subgroups are the subgroups which contain every element of the group.To determine the number of normal subgroups of order 7 in a group of order 14,

we need to use the following formula: `n_p = n/H`, where `n` represents the total number of subgroups of the group, `p` is the order of the subgroup we are looking for, and `H` is the normalizer of the subgroup in question.Using this formula, we can find that the order of the group is 14, and since 7 is a prime number, any subgroup of order 7 will be cyclic. Now, let's look at the different subgroups of the group of order 14:As 7 is a prime number and 7 divides 14, there will be one unique subgroup of order 7, and it will be cyclic.Since the group of order 14 is not a cyclic group, there are no other subgroups of order 7 besides the cyclic subgroup. Thus, the number of normal subgroups of order 7 in a group of order 14 is 1.

for such more questions on  prime number

https://brainly.com/question/881160

#SPJ11

The equation m = 12 + 2Y1 gives the slope of the line through the points P1=(-1.5, Y1) and P2=(-2, -6)

To find a point's coordinates in a coordinate system, you perform the opposite. Starting at the point, move vertically up or down until you reach the x-axis. Your x-coordinate is shown there. Afterwards, you'll be able to get a better understanding of how to use it.

It is assumed that the formula you supplied would be used to determine the slope (m) of the line connecting the two specified points, P1 and P2.

We may use the following formula to find the slope (m) of the line passing through the coordinates P1=(X1, Y1) and P2=(X2, Y2):m = (Y2 - Y1) / (X2 - X1) (X2 - X1)

Using the values provided:

P1 = (-1.5, Y1) (-1.5, Y1)

P2 = (-2, -6) (-2, -6)

These values can be used as substitutes in the formula:

m = (-6 - Y1) / (-2 - (-1.5))

Making the denominator simpler:

m = (-6 - Y1) / (-2 + 1.5)

m = (-6 - Y1) / (-0.5)

m = 12 + 2Y1

To know more about equation visit:-

https://brainly.com/question/29657988

#SPJ1

Question:

Formula: m=;

X₂-X1

P₁ = (X₁, Y₁) P₂ = (X2, Y₂)

1) P₁=(-1.5) and P₂=(-2,-6)

How to solve this exercise of linear equations of two points.

False, the probability that A or B will occur is P(A or B) = P(A) + P(B) - P(A and B).

Probability refers to the measure of the likelihood or chance of a particular event occurring. It is expressed as a number between 0 and 1, where 0 indicates an impossible event, and 1 indicates a certain event.

This formula is known as the Addition Rule for Probability and states that to calculate the probability of either event A or event B occurring (or both), we add the probability of A happening to the probability of B happening, but then we need to subtract the probability of both A and B happening at the same time to avoid double counting.

To know more about event, visit:

https://brainly.com/question/12961938

#SPJ1

Increasing lexicographic order: (0, 0), (0, 1/2), (1/4, 0), (1/4, 1/2)).Thus, the increasing lexicographic order of the critical points of the function f(x,y) = xy(1 - 4x - 2y) are (0, 0), (0, 1/2), (1/4, 0), and (1/4, 1/2).

lexicographic order: (0, 0), (0, 1/2), (1/4, 0), (1/4, 1/2)).Thus, the increasing lexicographic order of the critical points of the function f(x,y) = xy(1 - 4x - 2y) are (0, 0), (0, 1/2), (1/4, 0), and (1/4, 1/2).

Suppose that f(x,y) = xy(1 - 4x - 2y). f(x,y) has 4 critical points.

Let's discuss what are critical points and how we can determine them,A critical point is a point on the graph where the derivative changes its sign.

In other words, the derivative either changes from negative to positive or from positive to negative. A critical point is also known as a stationary point or a turning point

To determine the critical points, we need to find the derivative of the given function and set it equal to zero.The given function is[tex]f(x,y) = xy(1 - 4x - 2y).[/tex]

Let's find the partial derivative of f with respect to [tex]x:f_x(x,y) = y(1 - 4x - 2y) - 4xy = (1-2y)(1-4x)y.[/tex] (1)

Now, find the partial derivative of f with respect to y:f_y(x,y) = x(1 - 4x - 2y) - 2xy = (1-2x)(1-2y)x. (2)

To find the critical points, we need to set both partial derivatives (1) and (2) equal to zero.

(1-2y)(1-4x) = 0 and (1-2x)(1-2y) = 0.

Solving both equations separately, we have the following critical points:(1/4, 1/2), (1/4, 0), (0, 1/2), and (0, 0).

for such more questions on lexicographic order

https://brainly.com/question/22852607

#SPJ11

The dilated figure has the following coordinates: A' (-15, 0), B' (-5, 10), C' (10, 10), D' (15, -5), and E' (5, -10).

In this sense, coordinates are the points where a grid system intersects. Latitude and longitude are the traditional ways to express GPS coordinates. Degrees of separation north and south from the equator, which is 0 degrees, are measured by lines of latitude coordinates.

Just multiply the coordinates of each point by 5 to construct a figure about the origin using a scale factor of 5.

A (-3, 0)

B (-1, 2)

C (2, 2)

D (3, -1)

E (1, -2)

The coordinates of each point are multiplied by 5 to enlarge the image by a scale factor of 5:

A' = (-3 * 5, 0 * 5) = (-15, 0)

B' = (-1 * 5, 2 * 5) = (-5, 10)

C' = (2 * 5, 2 * 5) = (10, 10)

D' = (3 * 5, -1 * 5) = (15, -5)

E' = (1 * 5, -2 * 5) = (5, -10)

The coordinates of the dilated figure are:

A' (-15, 0)

B' (-5, 10)

C' (10, 10)

D' (15, -5)

E' (5, -10)

To know more about coordinates visit:-

https://brainly.com/question/16634867

#SPJ1

From the given information provided, the solution to the given trigonometric inequality is (π/4, 5π/4).

To solve the inequality sin(x) > cos(x) over the interval 0 ≤ x ≤ 2π radians, we can use the following steps:

Rewrite the inequality in terms of tangent:

Divide both sides by cos(x) to get:

tan(x) > 1

Find the solutions of the equation tan(x) = 1:

tan(x) = 1 when x = π/4 or x = 5π/4.

Check the sign of tangent in the intervals between the solutions:

We need to check the sign of tan(x) for x values in the following intervals:

(0, π/4), (π/4, 5π/4), and (5π/4, 2π).

In the interval (0, π/4), tan(x) is positive and less than 1.

In the interval (π/4, 5π/4), tan(x) is positive and greater than 1.

In the interval (5π/4, 2π), tan(x) is negative and less than -1.

Determine the solution set:

Since we are looking for x values that satisfy tan(x) > 1, the only interval that contains such values is (π/4, 5π/4). Therefore, the solution to the inequality sin(x) > cos(x) over the interval 0 ≤ x ≤ 2π radians is:

π/4 < x < 5π/4

In interval notation, we can write:

(π/4, 5π/4)

Learn more about inequality here: brainly.com/question/24372553

#SPJ4

In response to the stated question, we may state that The scatter plot indicates a clustering pattern in the data, and as elevation increases, temperature drops.

"Scatter plots are graphs that show the association of two variables in a data collection. It is a two-dimensional plane or a Cartesian system that represents data points. The X-axis represents the independent variable or characteristic, while the Y-axis represents the dependent variable. These plots are sometimes referred to as scatter graphs or scatter diagrams."

"A scatter plot is also known as a scatter chart, scattergram, or XY graph. The scatter diagram plots numerical data pairings, one variable on each axis, to demonstrate their connection."

Because the graph is a scatter plot, the data displays a clustering pattern.

We may deduce from the figure that as height increases, temperature falls.

As a result, C and E are the proper choices.

To know more about scatter plot visit:

https://brainly.com/question/13984412

#SPJ1

The correct question is -

The scatter plot shows the relationship between elevation and temperature on a certain mountain peak in North America. Which statements are correct?

A. The data shows one potential outlier

B. The data shows a linear association

C. The data shows a clustering pattern

D. The data shows a negative association

E. As elevation increases, temperature decreases

Answer:

w = 28 miles

Step-by-step explanation:

The perimeter is the sum of the lengths of the sides.

The sum of the lengths of the sides is w + 28 + 28.

The perimeter is 84.

w + 28 + 28 must equal 84.

w + 28 + 28 = 84

Now we solve for w.

Add 28 and 28.

w + 56 = 84

Subtract 56 from both sides.

w = 28

Answer: w = 28 miles

Answer:

Below

Step-by-step explanation:

Mass of bouncies + box = 17342     subtract mass of box from both sides

   mass of bouncies  =  17342 - 429 = 16913 g

Unit mass per bouncy = 505 g / 45 bouncy  

Number of Bouncies =  16913 gm / ( 505 g / 45 bouncy )  = 1507.1 bouncies

  With the given info, I am afraid it IS 1507 bouncies in the box

      maybe since the question asks for APPROXIMATE number, the answer is     1510 bouncies    ( rounded answer) ....or 1500

If x is a positive integer , 4x^1/2 is equivalent to product of 2 and square root of x, wherein it would surely be a positive value greater than 2.

Positive integers are the numbers on the number line which are greater then zero and extend on the right hand side of the number line till infinity. These numbers are also whole numbers in itself such as 1, 2, 3...,∞. When 4x^1/2 is calculated, it is assumed that 4x is raised to power half, which will provide the answer as 2√x.

It is because square root of 4 will be 2 and that of x will be √x. Square roots are the numbers obtained by multiplying a specific number by the number itself. For example: 3×3 = 9 or square root of 9 is 3.

If some positive integer is fixed in the equation, the desired outcome would be obtained as follows:

If x=4, (4×4)^1/2 = 4

Learn more about positive integers at:

brainly.com/question/1367050

#SPJ4

a. In the sample:i. The average value of birth weight for all mothers is 7.17 pounds.

ii. For mothers who smoke is 6.82 pounds.

iii. For mothers who do not smoke is 7.28 pounds.b. i. The difference in average birth weight for smoking and nonsmoking mothers can be estimated using the sample data. The difference is given by the formula:

Difference = X1 – X2, where X1 is the average birth weight of mothers who smoke and X2 is the average birth weight of mothers who do not smoke.Using the sample data, the estimated difference in average birth weight for smoking and nonsmoking mothers is: 7.28 – 6.82 = 0.46 pounds.ii. The standard error for the estimated difference can be calculated using the formula:SE(Difference) = sqrt[(SE1)^2 + (SE2)^2]where SE1 and SE2 are the standard errors of the two sample means.Using the sample data, the standard error for the estimated difference is:SE(Difference) = sqrt[(0.23)^2 + (0.12)^2] = 0.26 pounds.iii. The 95% confidence interval for the difference in average birth weight for smoking and nonsmoking mothers can be calculated using the formula:CI(Difference) = Difference ± (t-value) × (SE(Difference))where (t-value) is the value from the t-distribution table for a 95% confidence level with n1 + n2 – 2 degrees of freedom (where n1 and n2 are the sample sizes for smoking and nonsmoking mothers).Using the sample data, the 95% confidence interval for the difference in average birth weight is:CI(Difference) = 0.46 ± (2.048) × (0.26) = (0.04, 0.88) pounds.

for such more questions on  standard error

https://brainly.com/question/14467769

#SPJ11

The height that the T-short lands on the bleachers is x = 0.65.

The quadratic equation may be solved by adding and subtracting the same number within the parenthesis to get a perfect square trinomial, which is how the quadratic formula is obtained. A version of the equation that can be solved using the square root function is the result of this method.

Given that it can be used to solve any quadratic equation regardless of the values of the variables a, b, and c, the quadratic formula is an effective tool for solving quadratic equations.

The equation of the path of T-shirt is y = -18x² + 4x and that of the height of bleachers is 3y=2x−14 or y = 2/3x - 14/3

To find the height of the T-shirt landing we find the intersection of the two equations as follows:

-18x² + 4x = (2x - 14)/3

-54x² + 12x = 2x - 14

54x² - 10x - 14 = 0

27x² - 5x - 7 = 0

Using the quadratic formula:

x = (-b ± √(b² - 4ac)) / 2a

Substitute the values;

x = (-(-5) ± √((-5)² - 4(27)(-7))) / 2(27)

x = (5 ± √(925)) / 54

x = (5 ± 5√37) / 54

x = (5 + 5√37) / 54 = 0.65 and

x = (5 - 5√37) / 54 = -0.47

Hence, the height that the T-short lands on the bleachers is x = 0.65.

Learn more about quadratic formula here:

https://brainly.com/question/2615966

#SPJ1

The power of the test to detect an average increase in height of 1 inch could be increased by d. giving the drug to 25 randomly selected students instead of 50.

The power of a test is the probability of correctly rejecting the null hypothesis when it is false. In this case, the null hypothesis is that the drug does not cause people to grow taller, and the alternative hypothesis is that the drug causes an average increase in height of 1 inch.

To increase the power of the test, we want to increase the probability of correctly rejecting the null hypothesis when it is false. One way to do this is to increase the sample size, which will reduce the standard error of the mean and increase the t-statistic, making it more likely to reject the null hypothesis.

However, in this case, we can increase the power of the test by giving the drug to a smaller sample size of 25 instead of 50. This is because the effect size of the drug is not known, and giving the drug to a larger sample size will increase the variance of the data, making it harder to detect a significant difference. By reducing the sample size, we can increase the power of the test while still maintaining a reasonable sample size.

To know more about the "null hypothesis": https://brainly.com/question/15980493

#SPJ11

The correct answer is graph with the x axis labeled number of side dishes and the y axis labeled cost in dollars and a line going from the point 0 comma 6 and 75 hundredths through the point 3 comma 9.

Axis refers to the number of dimensions in a graph, chart, or plot. It is an imaginary line that is used to measure and plot values in a graph. In a line graph, the x-axis is the horizontal line and the y-axis is the vertical line.

The first graph shows a relationship between the number of side dishes and the total cost of the special that does not match the data given in the table.

The second graph does not reflect the data given in the table, as the total cost of the special increases from $5.25 to $9.00 when the number of side dishes increases from 0 to 5.

The third graph also does not reflect the data given in the table, as the total cost of the special increases from $6.75 to $8.25 when the number of side dishes increases from 0 to 4.

The fourth graph also does not reflect the data given in the table, as the total cost of the special increases from $5.75 to $7.25 when the number of side dishes increases from 0 to 1.

Therefore, the correct answer is mentioned above. This graph accurately reflects the relationship between the number of side dishes and the total cost of the special.

For more questions related to graph

https://brainly.com/question/26865

#SPJ1

The correct answer is "graph with the x axis labeled number of side dishes and the y axis labeled cost in dollars and a line going from the point 0,6 and 75 hundredths through the point 3,9".

Axis refers to the number of dimensions in a graph, chart, or plot. It is an imaginary line that is used to measure and plot values in a graph.

This graph correctly illustrates the relationship between the number of side dishes and the total cost of the special as shown in the table.

The line starts at 0 side dishes and $6.75

and ends at 4 side dishes and $8.25, both of which are in the table.

The graph accurately reflects this by having a line that starts at 2 side dishes and $6.75 and ends at 5 side dishes and $9.00.

This shows that as the number of side dishes increases, the cost also increases.

For more questions related to graph

https://brainly.com/question/26865

#SPJ1

The second segment on the left, which is equal to the price per bag of lemons (X) times the quantity of bags of lemons, represents the cost of the lemons (7).

A way for resolving proportionality issues is the unitary method. Finding the value of one unit and then using that value to determine the value of another unit in relation to the first is what this process entails. If we already know that three pens cost $6, for instance, we can use the unitary technique to get the price of five pens as follows: 1 pen costs $6, 3 pens cost $2. Five pens cost $10, or $5 multiplied by $2.

given

The arrow on the right in the diagram above, which is equal to $29.12, represents the total cost of the cookies and lemons.

The first segment on the left, which is $2.66, represents the price of the cookies.

The second segment on the left, which is equal to the price per bag of lemons (X) times the quantity of bags of lemons, represents the cost of the lemons (7).

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1

Answer:

Step-by-step explanation:

Kind of like rema from the song calm down calm down!!

you an find it on youtub

The minimum sample size required to get a 99% confidence interval that will specify the mean to within ±3 minutes is 597 (Rounded up to the nearest integer).

A) The 95% confidence interval for a sample of 123 hip surgeries of a certain type with an average surgery time of 136.9 minutes and a standard deviation of 24.1 minutes is (130.82, 142.98).Explanation:Given,Sample size, n = 123Average surgery time, μ = 136.9 minutesStandard deviation, σ = 24.1 minutesWe know that for a sample of size n, the 95% confidence interval is given by,  (Formula1)Where, z is the z-score, α/2 = 0.05/2 = 0.025  is the level of significance and n - 1 = 122 degrees of freedom.Now, substituting the given values in (Formula1), we get the 95% confidence interval as(130.82, 142.98)Thus, the 95% confidence interval for a sample of 123 hip surgeries of a certain type with an average surgery time of 136.9 minutes and a standard deviation of 24.1 minutes is (130.82, 142.98).B) The 99.5% confidence interval for a sample of 123 hip surgeries of a certain type with an average surgery time of 136.9 minutes and a standard deviation of 24.1 minutes is (127.93, 145.87).Explanation:We know that for a sample of size n, the 99.5% confidence interval is given by, (Formula2)Where, z is the z-score, α/2 = 0.005/2 = 0.0025 is the level of significance and n - 1 = 122 degrees of freedom.Now, substituting the given values in (Formula2), we get the 99.5% confidence interval as (127.93, 145.87).Thus, the 99.5% confidence interval for a sample of 123 hip surgeries of a certain type with an average surgery time of 136.9 minutes and a standard deviation of 24.1 minutes is (127.93, 145.87).C) The surgeon's claim that the mean surgery time is between 133.71 and 140.09 minutes is equivalent to the confidence interval (133.71, 140.09). The surgeon's claim falls inside the 95% confidence interval, (130.82, 142.98), therefore we can say that the surgeon's claim can be made with 95% confidence.D) The formula to find the minimum sample size for a 95% confidence interval that will specify the mean to within ±3 minutes is given by (Formula3)Where, n is the sample size and σ is the standard deviation.Now, substituting the given values in (Formula3), we get the minimum sample size as 424.15.The minimum sample size required to get a 95% confidence interval that will specify the mean to within ±3 minutes is 425 (Rounded up to the nearest integer).F) The formula to find the minimum sample size for a 99% confidence interval that will specify the mean to within ±3 minutes is given by (Formula4)Where, n is the sample size and σ is the standard deviation.Now, substituting the given values in (Formula4), we get the minimum sample size as 596.73.The minimum sample size required to get a 99% confidence interval that will specify the mean to within ±3 minutes is 597 (Rounded up to the nearest integer).

Learn more about Minimum

brainly.com/question/21426575

#SPJ11

You answer would be mate it would be x=66

By using addition calculation, we determine that Angela will end up making 42 cards in total.

Angela made 23 cards for her friends, but she wants to make even more to share with others. To determine how many cards she will make in total, we need to add the number of cards she has already made with the number of cards she plans to make.

So, we add 23 (the number of cards she has made) and 19 (the number of cards she plans to make) so in total, she will make:

23 + 19 = 42

Therefore, Angela will make 42 cards in all.

By using simple arithmetic calculation of basic addition, we find that  Angela will make 42 cards in all.

To know more about addition:

https://brainly.com/question/19829044

#SPJ4

By using unitary method, we found that the cost of 5m cloth is Rs. 1050.

According to the unitary method, the cost of 1 meter of cloth is equal to the total cost of 7 meters of cloth divided by 7. That is,

Cost of 1m cloth = Total cost of 7m cloth/7

We know that the total cost of 7m cloth is Rs. 1470. Therefore,

Cost of 1m cloth = 1470/7

Cost of 1m cloth = Rs. 210

This means that the cost of 1 meter of cloth is Rs. 210. Now, we need to find the cost of 5m cloth. To do that, we can use the unitary method again.

Cost of 5m cloth = Cost of 1m cloth x 5

Cost of 5m cloth = Rs. 210 x 5

Cost of 5m cloth = Rs. 1050

Therefore, the cost of 5m cloth is Rs. 1050.

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

Answer:

The second figure.

Step-by-step explanation:

The first figure's perimeter is:

70 in + 42 in + 56 in = 168 inches.

And the second figure's perimeter is:

42 in + 33 in + 33 in + 64 in = 172 inches.

Therefore, Figure 1 < Figure 2.

The probability that a truck drives between 99 and 128 miles in a day is 0.7734 rounded to four decimal places.

Standard deviation is a statistical measurement that depicts the average deviation of each value in a dataset from the mean value. It tells you how much your data deviates from the mean value. It represents the typical variation between the mean value and the individual data points.

The formula for the probability that a truck drives between 99 and 128 miles in a day is:

[tex]Z = (X - \mu) /\sigma[/tex]

where, X is the number of miles driven per day; μ is the mean of the number of miles driven per day; σ is the standard deviation of the number of miles driven per day. The value of Z for 99 miles driven per day is:

[tex]Z = (99 - 120) / 11 = -1.91[/tex]

The value of Z for 128 miles driven per day is:

[tex]Z = (128 - 120) / 11 = 0.73[/tex]

Using a standard normal distribution table or calculator, the probability of a truck driving between 99 and 128 miles per day is:

[tex]P(-1.91 < Z < 0.73) = 0.7734[/tex]

Therefore, the probability that a truck drives between 99 and 128 miles in a day is 0.7734 rounded to four decimal places.

Learn more about Standard deviation here:

https://brainly.com/question/475676

#SPJ11

A particular concentration of a chemical found in polluted water has been found to be lethal to 20% of the fish that are exposed to the concentration for 24 hours. Twenty fish are placed in a tank containing this concentration of chemical in water. Therefore

a) Probability that exactly 14 fish survive, Let x be the number of fish that survive. Using Binomial distribution, we have:[tex]P(X = x) = C(n,x) * p^x * (1-p)^{(n-x)}[/tex] where n is the total number of fish, p is the probability of survival and C(n,x) is the binomial coefficient. We have n = 20, p = 0.8 (since 20% die) and x = 14. [tex]C(20,14) * (0.8)^14 * (0.2)^6 = 38760 * 0.000016777216 * 0.0264241152 = 0.263[/tex] Therefore, the probability that exactly 14 fish survive is 0.263

b) Probability that at least 10 fish survive To find this probability, we can find the probability that 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 fish die, and subtract this probability from 1. Using the same formula as in (a), we have: [tex]P(X <= 9) = \sum  C(n,x) * p^x * (1-p)^{(n-x)}[/tex] where n = 20, p = 0.8 and x varies from 0 to 9. Using a calculator or software, we find:P(X <= 9) = 0.0169Therefore,P(X >= 10) = 1 - P(X <= 9) = 1 - 0.0169 = 0.983 Therefore, the probability that at least 10 fish survive is 0.983.

See more about binomial distribution at: https://brainly.com/question/29163389

#SPJ11