Describe how methane is
formed in terms of chemical bonding

Answers

Answer 1
The methane molecule is held together by the four strong C–H carbon–hydrogen covalent bonds by sharing electrons. Note that the inner shell of carbon's electrons are not shown above, only the outer shell of carbon's electrons are involved in the covalent bonding.

Related Questions

what is filtration? ㅜㅜ ㅜㅜ

Answers

Answer:

filtration is the process of using a filter to remove solids from liquids or gasses.

Example:

an example of this is tea.

Can compound take part in chemical reaction?

Answers

Answer:

YES!

Explanation:

In Rutherford experiment some alpha particles fired at a gold foil bounced backward as a result of ... A.reflection from the surfaces of gold atoms B.electrostatic repulsion by gold nuclei C.electrostatic repulsion by electronsD.all of the aboveE.none of the above

Answers

Answer:

B.electrostatic repulsion by gold nuclei

Explanation:

According to Rutherford's experiment, a thin gold foil was bombarded with alpha particles. Some of the particles passed through the foil undeviated, some were scattered through large angles while some bounced backwards.

It follows that the particles that bounced backwards must have encountered a massive particle of like charge.

The atom is composed of a nucleus which contains positively charged particles. Some of the alpha particles which are positively charged particles bounced back when they encountered the positively charged particles in the nucleus.

Answer: The correct option is B (electrostatic repulsion by gold nuclei).

Explanation:

In the Rutherford's experiment, he used positively charged particles called alpha particles to bombard an atom in order to find out what is inside the atom. Together with two other scientists, Geiger and Marsden, they used a narrow beam of alpha particles emitted from a radioactive source to bombard a thin gold foil. The scattering of the particles from the gold foil was detected by a movable zinc sulphide screen which could be rotated to various positions around the foil.

Each time an alpha particle hit the screen, a visible flash of light or scintillation was produced. This was observed by a microscope attached to the screen. It was then observed that some of the particles followed a straight path through the gold foil while a few where scattered in a backward direction. This was as a result of electrostatic repulsion by gold nuclei which occurs due to the greater part of the mass of the atom was concentrated in a minute nucleus with positive charge.

difference between Nitrogen 1 oxide and Oxygen​

Answers

Answer:

one atom of oxygen is not equal to oxygen

Question 3 of 10
How are prefixes used to name compounds?
O A. Prefixes are used to indicate the number of atoms in both
covalent and ionic compounds.
O B. Prefixes are used to tell how many of each kind of atom are in
covalent compounds.
O C. Prefixes are used to tell how many of each kind of atom are in
ionic compounds.
O D. A prefix is used only for the name of the second element in
covalent compounds.

Answers

the answer is highly possible to be C

Prefixes are used to indicate the number of atoms in both

covalent and ionic compounds.

Covalent or molecular compounds form when elements share electrons in a covalent bond to form molecules. Molecular compounds are electrically neutral.

Ionic compounds are (usually) formed when a metal reacts with a nonmetal (or a polyatomic ion). Covalent compounds are formed when two nonmetals react with each other. Since hydrogen is a nonmetal, binary compounds containing hydrogen are also usually covalent compounds.

Metal  +  Nonmetal —>  ionic compound (usually)Metal  +  Polyatomic ion —>  ionic compound (usually)Nonmetal  +  Nonmetal  —>  covalent compound (usually)Hydrogen  +  Nonmetal  —>  covalent compound (usually)

Learn more about covalent and ionic compounds.

https://brainly.com/question/20464674

#SPJ2

What is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water?

Answers

The answer is 29.7% view on how to solve

The mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water is 29.7%.

What is mass percent ?

Mass percent is a means to describe a component in a specific combination or to convey a concentration. The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution.

To determine the mass percent of an element in a compound, we divide the mass of the element in one mole of the compound by the compound's molar mass and multiply the result by 100.

Given:

Number of moles = 0.64 moles

Moles of sodium fluoride = Given mass/molar mass

0.64 moles = Mass / 42

Mass = 26.88gram

Mass % = Mass of solute/ mass of solution × 100

= 26.88/90.48 × 100

= 29.7 %

Thus, 29.7 % is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water

To learn more about the mass percent, follow the link;

https://brainly.com/question/5394922

#SPJ6

h2o how many molecules​

Answers

Answer:

1 mole H2O has 6.02 × 10^23 molecules

Explanation:

If 56 grams of carbon monoxide burns in oxygen to produce 88 grams of carbon dioxide, the mass of oxygen involved in the reaction is
grams.

Answers

The answer is 32 grams!

hope I helped

Sugar is made up of clear, colorless crystals that dissolve easily in water, but the crystals and their solution do not conduct electricity. Which statement describes sugar? It is made up of atoms that are held together by metallic bonds. It is made up of atoms that are held together by covalent bonds. It is made up of atoms that are held together by weak ionic bonds. It is made up of atoms that are held together by strong ionic bonds.

Answers

Answer:

it is made up of atoms that are held together by covalent bond

Atom A and Atom B have the same number of protons and neutrons, but they do not have the same number of electrons. ASAP

Answers

Answer:

They will be considered ions of the same element.

Explanation:

Ions form from elements when they gain or loss an electron, causing the number of protons (positively charged) to be unequal to the number of electrons (negatively charged), resulting in a net charge.

If there are more electrons than protons (from an element gaining 1 or more electrons), the ion is negatively charged and is called an anion.

If there are more protons than electrons (via the loss of electrons), the ion is positively charged and is called a cation.

Which of the following molecules does not have a permanent dipole?
A CF4
B CHF3
C CH2F2
D CH3F
Explain please ❤️

Answers

Answer:

I think no b

Explanation:

because in chemistry I have nothing listen

CHF3

Which is the electron configuration for lithium?
1s2
2s3
1s22s1
1s12s2

Answers

Answer:

1s2, 2s1

Explanation:

Lithium is the first element in the 2nd row of elements meaning its 1s orbital is completely filled and 1 electron is in the 2s orbital.

Answer:

the answer is C

Explanation:

What is the purpose of a catalyst in the production of hydrogen?
Select the correct answer.
- to increase the rate at which water molecules decompose
- to decrease the amount of oxygen produced
- to decrease the temperature of the reaction
- to increase the activation energy of the reaction

Answers

The purpose of a catalyst in the production of hydrogen is to increase the rate at which water molecules decompose.

What is a catalyst-A catalyst is a substance that increases the rate of a chemical reaction without itself being consumed or produced during the reaction. As a result, catalysts assist in speeding up chemical reactions while also decreasing the amount of energy needed for the reaction to occur. In hydrogen production, catalysts are used to speed up the decomposition of water into hydrogen and oxygen. The use of catalysts lowers the activation energy required for the reaction to occur, resulting in a faster reaction rate and lower operating temperatures.What is the process of hydrogen production?Hydrogen production has various methods, and one of the most commonly used methods is water electrolysis. In this method, water molecules are split into hydrogen and oxygen using an electric current passed through an electrode. Water is broken down into hydrogen and oxygen during the process, with the assistance of a catalyst. During this process, a catalyst like platinum or nickel is employed to speed up the chemical reaction of water decomposition.

When an electric current is applied to the catalyst, water molecules are broken apart, releasing hydrogen and oxygen atoms.Catalysts lower the activation energy of the reaction, allowing it to occur faster than it would otherwise. In hydrogen production, catalysts are crucial since they enable the reaction to occur at a lower temperature, reducing energy consumption and minimizing operating costs. As a result, the use of catalysts is essential to the production of hydrogen.

for such more questions on  catalyst

https://brainly.com/question/21598276

#SPJ8


[tex]\huge\mathfrak\red{QuEsTioN:-}[/tex]
How many neutrons are present in 4.4 gram of Co2​

Answers

Explanation:

hope it will help you Mark me as a brilliant

[tex]\large{\textrm{{{\color{navy}{Answer....}}}}}[/tex]

\large{\textrm{{{\color{navy}{Answer....}}}}}

__________________________

[tex]\Huge \mid \underline {\mathcal {{{\color{orange}{Answer...}}}}} \mid[/tex]

\Huge \mid \underline {\mathcal {{{\color{orange}{Answer...}}}}} \mid

__________________________

[tex]\boxed{\sf Note:-}[/tex]

\boxed{\sf Note:-}

____________________________

[tex]\begin{gathered} {\underline{\boxed{ \sf {\red{Answer}}}}}\end{gathered}[/tex]

\begin{gathered} {\underline{\boxed{ \sf {\red{Answer}}}}}\end{gathered}

___________________

[tex]\huge\red{\boxed{\orange{\mathcal{\overbrace{\underbrace{\fcolorbox{red}{pink}{\underline{\red{❥Answer࿐}}}}}}}}}[/tex]

\huge\red{\boxed{\orange{\mathcal{\overbrace{\underbrace{\fcolorbox{red}{pink}{\underline{\red{❥Answer࿐}}}}}}}}}

_____________________________

[tex]{\boxed{ \Huge{ \blue{ \mathcal{ \underline{ Answer}}}}}}[/tex]

{\boxed{ \Huge{ \blue{ \mathcal{ \underline{ Answer}}}}}}

_______________________

[tex]\large\bf\purple{ \longrightarrow} \rm \:[/tex]

\large\bf\purple{ \longrightarrow} \rm \:

__________________

[tex]\Huge\bf\overbrace{\underline{ \underbrace{\blue \dag \orange{Answer \blue \dag}}}}[/tex]

\Huge\bf\overbrace{\underline{ \underbrace{\blue \dag \orange{Answer}}}} \blue\dag

_____________________

[tex]\Huge\bf\underline{\underline{\red{Answer}}}[/tex]

\Huge\bf\underline{\underline{\red{Answer}}}

____________________

[tex]\Huge\bf { \underline{\mathbb {\green{ Answer }}}} [/tex]

\Huge\bf \underbrace{ \underline{\mathbb {\blue \dag\green{ Answer }}}} \underline\blue\dag

A sample of gas has a volume of 20 cm³.The pressure is changed to 90 kPa at constant temperature,while the volume increases to 75 cm³.What was the original pressure of the gas?​

Answers

Answer:

337.5kPa ~ 338kPa

Explanation:

Using the ideal gas law PV=nRT we have the following definitions from the problem:

V(initial) = 20cm³

P(initial) = ?kPa

V(final) = 75cm³

P(final) = 90kPa

Since we know that the number of moles of the sample did not change, nor did the temperature, nor does the ideal gas constant (R) we can rewrite this equation to state:

P(initial)V(initial) = nRT =P(final)V(final) ~  P(initial)V(initial) = P(final)V(final)

Rearranging this equation as we are solving for the initial pressure we find that:

P(initial) = (P(final)V(final))/V(initial)

P(initial) = ((90kPa)(75cm³))/20cm³

P(initial) = 337.5kPa ~ 338kPA

please help I will mark your answer as brainliest!!!!
Give the structural formula of CH3CH(CH3)CH3​

Answers

In the structure, we essentially have a Carbon with 3 methyl groups and a hydrogen attached to it

If an object is travelling 25.0 meters/second, how far will it travel in 45 minutes?

Answers

Speed=25m/sTime=45min=(45×60)s=2700s

[tex]\\ \rm\longmapsto Distance=Speed(Time)[/tex]

[tex]\\ \rm\longmapsto Distance=25(2700)[/tex]

[tex]\\ \rm\longmapsto Distance=67500m[/tex]

The object travelling at 25 m/s, will travel a distance of 67500 m in 45 mins.

We'll begin by converting 45 mins to seconds. This can be obtained as follow:

1 min = 60 s

Therefore,

45 mins = 45 × 60

45 mins = 2700 s

Finally, we shall determine the distance travelled by the object in 2700 s (i.e 45 mins). This can be obtained as follow:

Time = 2700

Speed = 25 m/s

Distance =?

Distance = speed × time

Distance = 25 × 2700

Distance = 67500 m

Therefore, the object will cover a distance of 67500 m in 2700 s (i.e 45 mins)

Learn more: https://brainly.com/question/14988345

Answer the following questions based on the above graph(Electron affinity vs Atomic no.)
i)Why on moving from Li to Be, the value of electron gain enthalpy drops.
ii)Cl has a higher peak than fluorine. Explain.
iii)Why Fluorine has the highest value among its period members.

Answers

i) Be has a fully filled 2s level.

ii) This is because chlorine is larger than fluorine.

iii) Fluorine needs only one electron to attain the octet configuration.

Electron affinity is the ability of an electron to accept  gaseous electrons to yield gaseous ions with a negative charge.  

Electron affinity depends on the size of an atom. Larger atoms have a higher electron affinity because they are better able to accept electrons.

The drop between Li and Be is because the 2s orbital in Be is already fully filled while Li has incompletely filled 2s level. electrons do not easily go into the higher energy 2p level.

The higher peak of chlorine is because chlorine is larger than fluorine hence the electron affinity of fluorine is less than that of chlorine. The smaller the ion the lesser the electron affinity.

Fluorine has the highest electron affinity in period 2 because it needs only one electron to attain the octet structure.

https://brainly.com/question/11755303

1.Which of the following forms only Ionic Bond?
1)Ca 2)C 3)Si 4)P

2.How many atoms of Na are present in 92 a.m.u of it?
a)4 b)5 c)6 d)7​

Answers

The Answer is A)4 atoms of NA are present in 92 a.m.u

describe two ways in which gases are similar to liquids in properties​

Answers

Answer:

they have weak intermolecular forces

3.
Melting point of four solids A, B, C and D are 299 K, 111K, 150K, 340K.their inter
particle forces of attraction are in the order:
(a) A (b) B (c) C (d) B

Answers

Answer:

You have provided wrong option.

Their interparticle forces of attraction are in the order D>A>C>B

So, option (d) D should be there.

g) silver nitrate + magnesium chloride → silver chloride + magnesium nitrate

Answers

Answer:

AgNo3+Mgcl2--->Agcl2+Mg(No3)2

I hope this helps

Which among the following mixtures will show tyndal effect?
i) copper sulphate solution
ii) sand in water.
iii) milk.
iv) starch solution ​

Answers

Answer:

milk and starch solution are the colloids, hence these will show the tyndall effect

Answer:

milk and starch solution

Explanation:

Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.

Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.

Convert 50 m to mm
using the method of dimensional analysis

Answers

Answer:

Explanation:

meters has to go on the bottom of the bracket used for conversion

50m [ 1000 mm / 1 m]= 50000 mm The meters cancel

What is the pressure in atm exerted by 1.8 g of H2 gas exert in a 4.3 L balloon at 27ºC? R = 0.821(L*atm) / (mol*K)

Answers

kakamc cjdismxsjxj xjcodmd xksowmd x

The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm

What is Ideal gas law ?

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

Let's convert grams to moles (via molar mass).

Molar Mass (H₂) :  2 (1.008 g/mol)

Molar Mass (H₂) :  2.016 g/mol

1.8 grams H₂               1 mole

----------------------  x  ----------------------  =  0.893 moles H₂

                                2.016 grams

The Ideal Gas Law equation looks like this:

PV = nRT

In this equation,

P = pressure (atm) V = volume (L) n = moles R = Ideal Gas Constant (0.0821 L*atm/mol*K)T = temperature (K)

After converting Celsius to Kelvin, you can put the given values into the equation and simplify to find the pressure.

P = ? atm                                R = 0.0821 L*atm/mol*K

V = 4.3 L                               T = 27 °C + 273.15 = 300.15 K

n = 0.893 moles

PV = nRT

P (4.3 L) = (0.893 moles) (0.0821 L*atm/mol*K)( 300.15 K)

P (4.3 L) =  22.0021

P = 5.12 atm

Therefore, The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm

Learn more about Ideal gas here ;

https://brainly.com/question/8711877

#SPJ2

c. The element in group 2 and period 3 is -

Answers

Answer:

Magnesium

Explanation:

Hope this helps!

How the amount of acid rain caused by the burning of fossil fuels can be reduced ?

Answers

Answer:

The amount of acid rain caused by the burning of fossil fuels can be reduced by creating nitrogen oxides in the process of burning coal and other fossil fuels, some power plants are changing the way they burn coal. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power.

In a chemical equation, the symbol that means "dissolved in water" is _____. (s) (l) (aq) (g)

Answers

in a chemical equation, the symbol that means “dissolved in water” is (aq).

Cho các dung dịch: Glucozơ, glixerol, fomanđehit, etanol. Có thể dùng thuốc thử nào sau đây để phân biệt được cả 4 dung dịch trên?

A. Cu(OH)2; B. Dung dịch AgNO3 trong NH3;

C. Na kim loại; D. Nước brom.



Xem thêm tại: https://loigiaihay.com/bai-2-trang-25-sgk-hoa-hoc-12-c55a8069.html#ixzz71KH6guhm

Answers

Answer:

chắc là câu B í

Explanation:

During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of Iodine did not show Tyndall effect . Explain reason. iii) How can you relate particle size to Tyndall effect?

Answers

The question requires a good knowledge of the meaning of Tyndall effect or scattering of light by false solutions in chemistry

The student observed a beam of visible light through mixture A because A exhibits Tyndall effect

Tincture of Iodine does not show Tyndall effect because its solution consists of particles less than 1 nanometer in solution.

A solution may be classified as a true solution or a false solution. A true solution consists of particles which are less than 1 nanometer in solution. A true solution does not scatter visible light.

A false solution, on the other hand consists of particles larger than 1 nanometer and does scatter visible light.

Starch in water is an example of a false solution or colloid hence it exhibits Tyndall effect. The scattering of visible light by a solution is known as Tyndall effect.

Tincture of iodine and sodium chloride in water are all true solutions hence they do not scatter visible light.

https://brainly.com/question/23487849

Other Questions
A binomial probability experiment is conducted with the given parameters. Compute the probability of x successes in the n independent trials of the experiment.n=12, p=0.35, x=2 Most linear graphs are direct variation, unless they go through the origin.TrueFalse Which classification describes the following system of equations?(12x+5y-32= 36x-2y + 4z = 39x-10y + 5z = 27 is what a drug does to your body. O a) Irrigation b) Pharmacodynamics c) Excretion d) Pharmacokinetics A block of mass 2 kg starts from rest at the top of a friction quarter of a circle of radius R. The block then slides over frictionless curved surface in the shape of a eventually comes to rest 8 m from the beginning s a horizontal rough surface where e of the horizontal surface. The coefficient kinetic friction between the rough surface and the block is 0.4 . determine the acceleration of the block over the rough surface length 8m I understand that i could not rely upon her to get a job done.change to paasive Propose THREE ways in which one can develop strong work ethics when entering the job market Describe the process of germination and plant growth you observed in the lab activity for a monocot plant. Below is the structure of what should be the peptide Thr-Glu-Arg-Met. However, one of these residues has been drawn incorrectly. Identify this residueThrGluArgMet why are green plants known as producer?pls tell answer in short :) almost done vampire diaries. what other shows do you recommend me to watch? what is meaning of H2O and compound During the current fiscal year, the Gateway City government recorded a $15,000 transfer from the General Fund to an internal service fund, a $25,000 transfer from the General Fund to an enterprise fund, a $10,000 transfer from an enterprise fund to an internal service fund, and a $5,000 transfer from an enterprise fund to the General Fund. In the Business-type Activities column of the government-wide financial statements, Gateway City should report: Multiple Choice How can you use what you know about 5(2) to find 5(-2)?Please help why do atom absorb photon since it makes it unstable?? What is the answer to 5/8 - 1/4^2 Shaun is planting trees along his driveway, and he has 66 redwoods and 66 pine trees to plant in one row. What is the probability that he randomly plants the trees so that all 66 redwoods are next to each other and all 66 pine trees are next to each other Find the value of b. Round the nearest tenth. A director wants to do an interpretation of Romeo and Juliet set in the future. Which of the following is NOT something that would help create this interpretation? A. Replace props like swords to more modern weapons B. Change the set to something with more technology C. Replace the classical costumes with more modern clothing D. Change the lighting to be brighter A student majoring in accounting is trying to decide on the number of firms to which he should apply. Given his work experience and grades, he can expect to receive a job offer from 70% of the firms to which he applies. The student decides to apply to only four firms. (a) What is the probability that he receives no job offer?(b) How many job offers he expects to get?(c) What is the probability that more than half of the firms he applied do not make him any offer?(d) What assumptions do you need to make to find the probabilities? To increase the chance of securing more job offers, the student decides to apply to as many companies as possible, he sent out 60 applications to all different accounting firms. (e) What is the probability of him securing more than 3 offers?