Answer:
english pls so i can answer
A 10 M concentrated stock solution of NaCl was used to prepare 5 liters of diluted 1 M solution. Which of the following statements is true about the process used to achieve this required dilution?
The volume of stock solution used was less than 0.4 liters.
The volume of stock solution used was more than 5 liters.
The volume of the solvent used was less than 0.4 liters.
The volume of the solvent used was less than 5 liters.
Answer: D.) The volume of stock solution used was more than 5 liters
Explanation:
Answer:
b
Explanation:
i got it
Draw the curved arrows showing a proton transfer reaction, and draw the products of that proton transfer. Do not include the Li counterion, and lone pairs are not required in the products.
Answer:
Draw the curved arrows showing a proton transfer reaction, and draw the products of that proton transfer. Do not include the Li counterion, and lone pairs are not required in the products and the question is hsown below:
Explanation:
The proton from water is abstracted by butyl carbanion and hydroxide ion is formed from water.
The reaction is shown below in the attachment.
1. You find a separatory funnel set up in a fume hood. There are clearly two visible layers. Describe a method you could use to determine which layer is the aqueous layer.
Answer:
You find a separatory funnel set up in a fume hood. There are clearly two visible layers. Describe a method you could use to determine which layer is the aqueous layer.
Explanation:
In the separating funnel, the liquid with less density exists at the top layer and the liquid with greater density will exist at the bottom layer.
To identify the aqueous layer, add a bit of water to the separating funnel.
Then, observe where the water will go and mix.
If it mixes with the bottom layer, then the bottom layer is the aqueous layer.
If water mixes with the top layer, then top layer is the aqueous layer.
A method we could use to determine which layer is the aqueous layer is by adding 2-4 drops of water in the separatory funnel.
Explanation:
A separatory funnel is a glass apparatus used in labs to separate two immiscible liquids from each other.The two liquids will be present distinctly in form of two different layers one on the other.The liquid at the bottom is with higher density in comparison to the liquid layer at the top which is with lower density.It is mainly used to separate the layer of organic compounds from the aqueous layer.One way to determine the aqueous layer in the separatory funnel is to add 2-4 drops of water to the separatory funnel and observe in which layer the water drops get invisible that is mixed up.The layer in which water drop mixes will experience a small increase in its volume and that will be the aqueous layer.Water drops will not mix with the organic layer can be easily observed with eyes.So, from this, we can conclude that a method we could use to determine which layer is the aqueous layer is by adding 2-4 drops of water in the separatory funnel.
Learn more about separatory funnel here;
brainly.com/question/5536204?referrer=searchResults
brainly.com/question/5999552?referrer=searchResults
Tryptophan, an essential amino acid, is important in the synthesis of the neurotransmitter serotonin in the body.
a. True
b. False
Answer:
B porque si :) y eso Jsksjs
Answer:A
Because it's an amino acid and all amino acids are key to any part of your body.
I NEED THIS NOW AND NO LINKS OR ILL REPORT
Which material creates the most waste and pollutants when creating one
ton of bottles? *
aluminum
glass
plastic
Answer:
plastic
........................
What is the concentration of a solution that is made by diluting 50.0 mL of a 0.40 M NaCl solution to a final volume of 1000.0 mL?
Answer:
The correct answer is 0.020 M.
Explanation:
To solve this problem, we can use the equation M1V1 = M2V2, where M represents the molarity of the solution and V represents the volume of solution. Since we are given that the original solution is 50 mL and 0.40 M, these values are V1 and M1, respectively. The solution after dilution has a volume of 1000 mL, so this value is V2. We are solving for the molarity after dilution, which represents M2.
If we plug in the values specified above, we get the following:
M1V1 = M2V2
(0.40 M)(50.0 mL) = (M2)(1000.0 mL)
Solving for M2, we get:
M2 = 0.020 M
Notice that our answer has 2 significant figures because 0.40 has 2 significant figures, the least of any values given in the problem.
Therefore, the answer is 0.020 M.
Hope this helps!
Scientist A produces 83.67 g KMnO4 while Scientist B produces 81.35 g KMnO4.
What is the percent yield for Scientist A?
What is the percent yield for Scientist B?
You must show all work to receive full credit.
The equation for the production of potassium permanganate is as follows:
2 MnO2 + 2 KOH + O2 → 2 KMnO4 + H2
Answer:
[tex]Y_A=92.1\%\\\\Y_B=89.6\%[/tex]
Explanation:
Hello there!
In this case, according to the given chemical equation for the reaction for the production of potassium permanganate, we can see a 2:2 mole ratio of this product to the starting manganese (II) oxide, which means, we can calculate the theoretical yield of the former via stoichiometry:
[tex]m_{KMnO_4}=50.0gMnO_2*\frac{1molMnO_2}{86.94gMnO_2}*\frac{2molKMnO_4}{2molMnO_2} *\frac{158.034gKMnO_4}{1molKMnO_4} \\\\m_{KMnO_4}=90.9gKMnO_4[/tex]
Now, we are able to compute the percent yields, by using the actual yield each scientist got:
[tex]Y_A=\frac{83.67g}{90.9g} *100\%=92.1\%\\\\Y_B=\frac{81.35g}{90.9g} *100\%=89.6\%[/tex]
Regards!
Write the empirical formula for at least four ionic compounds that could be formed from the following ions:
a). PO3−4
b). NH+4
c). Fe3+
d). ClO−3
Answer:
a. Na₃PO₄
b. NH₄Cl
c. FeCl₃
d. KClO₃
Explanation:
a. Sodium tetraoxophosphate(V) Na₃PO₄
3Na⁺ + PO₄³⁻ → Na₃PO₄
b. Ammonium Chloride NH₄Cl
NH₄⁺ + Cl⁻ → NH₄Cl
c. Iron(III)chloride
Fe³⁺ + Cl⁻ → FeCl₃
d. Potassium trioxochlorate(V) KClO₃
K⁺ + ClO₃⁻ → KClO₃
A student is examining a chemical reaction the student notes that the reaction requires 7.14 kcal mol energy per biomlecule synthesized the reaction itself produces 21.42 kcal mol energy the sutdent argues this is enough energy to make 3 biomecules. What error has the student made in the analysis?
a. The studentiras not remembered the Second Law of Thermodynamics.
b. The students has not remembered the First Law of Thermodynamics.
c. The student has made a simple calculation error
d. The student has made a conversion error
Chrysanthenone is an unsaturated ketone. If Chrysanthenone has M+ = 150 and contains 2 double bond(s) and 2 ring(s); what is its molecular formula? Enter the formula in the form CH first, then all other atoms in alphabetical order; do not use subscripts. The formula is case-sensitive.
Answer:
the Molecular formula will be; C10H14O
Explanation:
Given the data in the question;
Chrysanthenone is an unsaturated ketone,
it has M+ = 150 and contains 2 double bond(s) and 2 ring(s).
molecular formula = ?
we know that ketone contain 1 oxygen and mass of oxygen is 16
so mass of the C and H remaining will be;
⇒ 150 - 16 = 134
Now we determine the number of C atoms;
⇒ 134 / 13 = 10
hydrocarbon with 10 hydrogen atom have CnH2n+2 means
⇒ ( 10 × 2 ) +2 = 22 hydrogens
But then we have 3 unsaturation meaning 6 hydrogens less and also we have ring meaning 2 more hydrogens
⇒ 22 - 6 - 2 = 14
Hence the Molecular formula will be; C10H14O
Calculate the number of milliliters of 0.587 M NaOH required to precipitate all of the Fe3 ions in 197 mL of 0.654 M FeCl3 solution as Fe(OH)3. The equation for the reaction is: FeCl3(aq) 3NaOH(aq) Fe(OH)3(s) 3NaCl(aq)
Answer: The number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].
Explanation:
The reaction equation is as follows.
[tex]FeCl_{3}(aq) + 3NaOH(aq) \rightarrow Fe(OH)_{3}(s) + 3NaCl(aq)[/tex]
Therefore, moles of [tex]Fe(OH)_{3}[/tex] are calculated as follows.
Moles = Molarity of [tex]Fe(OH)_{3}[/tex] [tex]\times[/tex] Volume (in L)
= 0.654 M [tex]\times[/tex] 0.197 L
= 0.128 mol
Now, according to the given balanced equation 1 mole of [tex]FeCl_{3}(aq)[/tex] reacts with 3 moles of NaOH(aq). Hence, moles of [tex]Fe(OH)_{3}[/tex] reacted are calculated as follows.
3 [tex]\times[/tex] 0.128 mol = 0.384 moles of NaOH
As moles of NaOH present are as follows.
Moles of NaOH = Molarity of NaOH [tex]\times[/tex] Volume (in L)
0.384 mol = 0.587 M [tex]\times[/tex] Volume (in L)
Volume (in L) = 0.654 L (1 L = 1000 mL) = 654 mL
Thus, we can conclude that the number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].
cấu hình electron của nguyên tử Ca
Explanation:
Do đó cấu hình electron của canxi là: 1s2 2s2 2p6 3s2 3p6 4s2.
classify the following compounds as chiral, achiral (but not meso), or meso. 1st structure: _________ 2nd structure: _________ 3rd structure: _________
Answer:
1st structure - Meso
2nd structure - Chiral
3rd structure - achiral
Explanation:
In the 1st structure there is nitrogen atom bonded with 4 different groups. It is Meso compound. In the second structure a carbon atom is attached with hydroxide molecule OH and has four different environment. It is Chiral compound. In the third structure no atom have different atom or group surrounding it. Therefore it is Achiral compound.
Question:
What is the molar concentration of 1.29 mol of KCL dissolved in 350 mL of solution?
Answer:
M = 3.69 M.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the molar concentration of the 1.29 moles of KCl in 350 mL of solution by recalling the mathematical definition of molarity as the division of the moles by the volume in liters, in this case 0.350 L; thus, we proceed as follows:
[tex]M=\frac{1.29mol}{0.350L}\\\\M=3.69M[/tex]
Which gives molar units, M, or just mol/L.
Regards!
A student obtains a beaker containing a solution that is determined to have a hydrogen ion
concentration (H+) of 6.7x10-14. Based on this information, please answer the following
questions:
a) What is the pH of the solution?
b) is the solution acidic, neutral or basic?
Answer:
pH = 13.1
Basic
Explanation:
Step 1: Given data
Hydrogen ion concentration ([H⁺]): 6.7 × 10⁻¹⁴ M
Step 2: Calculate the pH of the solution
We will use the definition of pH.
pH = -log [H⁺]
pH = -log 6.7 × 10⁻¹⁴ = 13.1
When pH < 7, the solution is acid.When pH = 7, the solution is neutral.When pH > 7, the solution is basic.Since pH > 7, the solution is basic.
1. Rank the following solutions from least polar to most polar. Rank on a scale of 1-4: 1 being the least polar and 4 being the most polar. _______ 50% ISOPROPANOL / H2O _______ 25% ISOPROPANOL / H2O _______ PURE WATER _______ ISOPROPANOL / H2O
Answer:
50% ISOPROPANOL / H2O - 1
25% ISOPROPANOL / H2O - 2
Pure water - 4
ISOPROPANOL / H2O - 3
Explanation:
More Isopropanol concentration is least polar. When the isopropanol is mixed with water its polarity increases. Pure water is most polar. The polarity of a substance is dependent on its ability to bent and mold in the shape as required.
when ice melts,its volume
Answer:
There isn't enough information to answer you're question.
Explanation:
Have a great day!!!
It is important for scientists to know how much energy is given off or absorbed in a chemical reaction. Which options below would indicate an exothermic reaction?
delta H = –
delta H = +
Energy is considered a reactant in the reaction: A + B + energy ---> C + D
Energy is considered a product in the reaction: A + B ---> C + D + energy
Energy is released in the reaction.
Energy is absorbed in the reaction.
For exothermic reactions, ΔH is always negative, energy is considered a product, and energy is released in the reaction.
An exothermic reaction is one in which energy, usually in the form of heat, is released to the environment from the reaction. In other words, the final temperature of an exothermic reaction would always be more than the initial temperature.
This also means that heat energy is a product of exothermic reactions and this heat is released to the environment from the reaction.
More on exothermic reactions can be found here: https://brainly.com/question/10373907?referrer=searchResults
Answer:
a, d, and e is correct on edge of the nuity
Explanation:
have a good day
The sloth is able to camouflage by moving really slowly and
A. changing colors
B. hanging upside down
D. having fur that is a similar color to tree barks with algae growing on it
Answer:
D. having fur that is a similar color to tree barks with algae growing on it
Explanation:
Choice A doesnt make sense because sloths do not change colors, and hanging upside down would not protect you from prey or blend in. D matches the description of a sloth.
Answer:
Having fur that is a similar color to tree barks with algae growing on it.
Explanation:
You have 4 litres of a 3.0 mol/L solution of NaCl in a
chemical store room.
How many moles of NaCl are present? *
0.75 mol
1.33 mol
12 mol
M = 3.0 mol/L
V = 4 L
Required:n
Solution:M = n / V
n = MV
n = (3.0 mol/L)(4 L)
n = 12 mol
Therefore, the number of moles of NaCl present is 12 mol.
#ILoveChemistry
#ILoveYouShaina
Answer 12 mol
Explanation: [tex]C_{M} = \frac{n}{V} ==> n = C_{M} *V=4*3=12 mol[/tex]
g Select the statement that best answers the following question What effect does the cation of an ionic compound have on the appearance of the solution? The cation affects the intensity of the color more than the color of the solution. The cation affects the color of the solution more than the intensity of the color. The cation does not affect the color or color intensity of the solution. The cation only affects the intensity of the color in a solution.
Answer:
The cation affects the intensity of the color more than the color of the solution.
Explanation:
According to Beer Lambert law, the intensity of the colour of the solution depends on the concentration of the specie responsible for the colour in the solution.
Let us recall that transition metal compounds are coloured in solution due to electronic transitions.
Therefore, the cation affects the intensity of the color more than the color of the solution.
Determine whether the compounds below could be used to prepare an buffer solution. Items (6 items) (Drag and drop into the appropriate area below) acetic acid Ka-1.8x10-5 ammonia Kb= 1.8x10 carbonic acid Ka-4.3x107 chlorous acid: calcium Ka-1.1x10-2 sulfuric acid hydroxide Categories CANNOT be used Drag and drop here Drag and drop here
Answer:
Acetic acid, carbonic acid and chlorous acid with calcium hydroxide
Ammonia with sulfuric acid
Explanation:
A buffer is an aqueous mixture of a weak acid and its conjugate base or vice versa.
Weak acids reacts with strong bases to produce the conjugate base. In the right amount, you can produce a buffer. In the same way, you can produce a buffer from the mixture of weak bases with strong acids.
In the problem, you have weak acids (acetic acid, carbonic acid, chlorous acid), one weak base (ammonia), one strong base (calcium hydroxide) and one strong acid (Sulfuric acid).
Thus, the mixtures that can produce a buffer are:
Acetic acid, carbonic acid and chlorous acid with calcium hydroxide
And:
Ammonia with sulfuric acid
Element compound2. Select all the compounds from the following elements
HE
Fe2O3
O2
P4
C2H4O2
Answer: [tex]Fe_2O_3[/tex] and [tex]C_2H_4O_2[/tex] are the compounds.
Explanation:
A chemical compound is defined as a chemical substance that is formed by the combination of two or more atoms of different elements which cannot be separated by any physical means but when chemically treated, they decompose into their parent elements.
For example, water is made up of hydrogen and oxygen. This compound is a liquid and its individual components are gases. When water is decomposed, it forms hydrogen and oxygen gas.
For the given options:
He(Helium) is an element formed by the combination of only type of atoms.
[tex]O_2[/tex] and [tex]P_4[/tex] are molecules of same element.
[tex]Fe_2O_3[/tex] is a compound fomed by the combination of iron and oxygen atoms.
[tex]C_2H_4O_2[/tex] is a compound fomed by the combination of carbon, hydrogen, and oxygen atoms.
Hence, [tex]Fe_2O_3[/tex] and [tex]C_2H_4O_2[/tex] are the compounds.
What is the mass of 1 mole of baking soda (sodium hydrogen carbonate) which has a formula of NaHCO ?
Answer:
1 Mole = 84.007 g/mol
Explanation:
Sodium bicarbonate (IUPAC name: sodium hydrogen carbonate), commonly known as baking soda or bicarbonate of soda, is a chemical compound with the formula NaHCO3
calculate the mass in 4.05*10^22 molecules of calcium phosphate
Answer:
m = 20.9 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by recalling both the Avogadro's number for the calculation of the moles in the given molecules of calcium phosphate and the molar mass of this compound in order to secondly calculate the mass as shown on the following setup:
[tex]m=4.05x10^{22}molecules*\frac{1mol}{6.022x10^{23}}*\frac{310.18g}{1mol}\\\\m=20.9g[/tex]
Regards!
Which statement best describes the formula equation Cl2(g) + 2KBr(aq) Right arrow. 2KCl(aq)+ Br2(l)?
Carbon iodide reacts with potassium bromide to form potassium carbon iodide and bromine.
Bromine gas reacts with a solution of potassium chloride to form potassium bromide and chlorine gas.
Potassium bromine gas reacts with liquid chlorine to form potassium chloride in solution and bromine gas.
Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.
Answer:
Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.
Explanation:
The balanced equation of the chemical reaction is given below:
Cl2(g) + 2KBr(aq) → 2KCl(aq)+ Br2(l)
According to the above equation, it can be said that chlorine in its gaseous form (Cl2) reacts with pottasium bromide (reactants) to form pottasium chloride (KCl) and bromine, which is a liquid at room temperature.
Answer:
D: Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.
A mixture of 3 moles of N2, 5 moles of CO2, and 10moles of Cl2 exert a total pressure of 1120 mmHg. What is the partial pressure of CO2?
Answer:
A mixture of 3 moles of N2, 5 moles of CO2, and 10moles of Cl2 exert a total pressure of 1120 mmHg. What is the partial pressure of CO2?
Explanation:
According to Dalton's law of partial pressures:
The partial pressure of a gas can be determined by using the formula:
[tex]the partial pressure of a gas = mole fraction of the gas * total pressure[/tex]
Partial pressure of CO2:
[tex]partial pressure of CO2= total pressure * mole fraction of CO2\\\\Mole fraction of CO2=\frac{number of moles of CO2}{total number of moles of all the gases} \\mole fraction of CO2=\frac{5mol}{3mol+5mol+10mol} = 5/18\\Partial pressure of CO2=\frac{5}{18} * 1120mmHg\\ =311.1mmHg[/tex]
Hence, the partial pressure of CO2 is 311.1mmHg.
When heated, magnesium combines readily with excess oxygen in the air to produce magnesium oxide, as shown in the following unbalanced equation.
Mg (s) + O2 (g) → MgO (s) + heat
What two types of reactions could this chemical equation be classified as?
Answer: The given chemical reaction can be classified as synthesis and exothermic.
Explanation:
A synthesis reaction is defined as the reaction where two small chemical species combine in their elemental state to form a single large chemical species.
Exothermic reactions are defined as the reactions in which heat is released by the reaction. The heat is written on the product side of the reaction.
For the given chemical reaction:
[tex]Mg(s)+O_2(g)\rightarrow MgO(s)+\text{heat}[/tex]
The above chemical reaction is a type of synthesis and exothermic as two substances in their elemental state are combining. Also, heat is getting released in the reaction.
Hence, the given chemical reaction can be classified as synthesis and exothermic.
How did mount Shasta
originate? (Science)
It was formed 15,000 to 20,000 years ago from andesite flows and was later intruded by a hornblende dacite dome. Since the end of the last ice age, Shastina cone was built by mostly pyroxene andesite lava flows.
Explanation:
Part C
Read about an improved version of an atmospheric water generator e, and write a
one-paragraph description of this technology.
Answer:
Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.
Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point thereby producing potable drinking water.
Explanation:
Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.
Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point thereby producing potable drinking water.
Answer:
A device that collects water from humid ambient air is known as an atmospheric water generator. Condensation is the process of extracting water vapor from the air by chilling it below its dew point, exposing it to desiccants, or pressurizing it. An AWG, unlike a dehumidifier, is meant to make the water drinkable. Because there is nearly always a little amount of water in the air that may be collected, AWGs are useful in situations where clean drinking water is difficult or impossible to get. Cooling and desiccants are the two most common ways used.
Explanation:
