Answer:
You typically create a database during Oracle Database software installation. However, you can also create a database after installation.
Reasons to create a database after installation are as follows:
You used Oracle Universal Installer (OUI) to install software only, and did not create a database. You want to create another database (and database instance) on the same host computer as an existing Oracle database. In this case, this chapter assumes that the new database uses the same Oracle home as the existing database. You can also create the database in a new Oracle home by running OUI again. You want to make a copy of (clone) a database.
How would you type the word floor
Answer:
f l o o r
Explanation:
You work in an office that uses Linux and Windows servers. The network uses the IP protocol. You are sitting at a Windows workstation. An application you are using is unable to connect to a Windows server named FileSrv2. Which command can you use to determine whether your computer can still contact the server?
Answer:
PING
Explanation:
To check if there's still connectivity between the computer and server, I would use the ping command.
The ping command is primarily a TCP/IP command. What this command does is to troubleshoot shoot. It troubleshoots connection and reachability. This command also does the work of testing the name of the computer and also its IP address.
How can an Outlook user search for contacts? Check all that apply.
the Search bar located above the list of contacts
the Search People bar on the Find command group
the Search People located on the People navigation icon
CTL + E to activate the search contacts box
advanced Find under the Search tab
the options menu in the backstage view
Answer: the Search bar located above the list of contacts.
the Search People bar on the Find command group.
the Search People located on the People navigation icon.
CTL + E to activate the search contacts box.
advanced Find under the Search tab.
Explanation:
An Outlook user can search for contacts through the following ways:
• the Search bar located above the list of contacts.
• the Search People bar on the Find command group.
• the Search People located on the People navigation icon.
• CTL + E to activate the search contacts box.
• advanced Find under the Search tab.
Therefore, the correct options are A, B, C, D and E.
The subroutines/function calls you need to call to pass an application message down to the transport layer is called the
Answer:
"TCP/IP library" is the appropriate answer.
Explanation:
A communications protocol that always connects to yet another system or device and guarantees transmissions were also correctly converted to digital signals or received, is termed as TCP/IP.Technology can also do a variety of things on its own and. However, when you speak among each other devices' maximum throttle emerges.Write a recursive function that returns 1 if an array of size n is in sorted order and 0 otherwise. Note: If array a stores 3, 6, 7, 7, 12, then isSorted(a, 5) should return 1 . If array b stores 3, 4, 9, 8, then isSorted(b, 4) should return 0.int isSorted(int *array, int n){
Answer:
Here the code is given as follows,
Explanation:
Code:-
#include <stdio.h>
int isSorted(int *array, int n) {
if (n <= 1) {
return 1;
} else {
return isSorted(array, n-1) && array[n-2] <= array[n-1];
}
}
int main() {
int arr1[] = {3, 6, 7, 7, 12}, size1 = 5;
int arr2[] = {3, 4, 9, 8}, size2 = 4;
printf("%d\n", isSorted(arr1, size1));
printf("%d\n", isSorted(arr2, size2));
return 0;
}
Output:-
Use NAND operator to write; P or Q, and P -Q make an everyday implication sentence using only NAND
Answer:
Hence the answer is given as follows,
Explanation:
By using the NAND operator:-
P or Q and P -Q make an everyday implication sentence using the only NAND is given as,
Carl is planning for a large advertising campaign his company will unveil. He is concerned that his current e-commerce server farm hosted in a public cloud will be overwhelmed and suffer performance problems. He is researching options to dynamically add capacity to the web server farm to handle the anticipated additional workload. You are brought in to consult with him on his options. What can you recommend as possible solutions
Answer:
Cloud Bursting
Explanation:
One of the best possible solutions for this scenario would be Cloud Bursting. This is a solution of using Cloud Server services to handle the server farm workload. The difference is that Cloud Bursting allows the company to use the Cloud services only when their own personal web server farms hit peak demand and can no longer handle the incoming demand. The excess demand is outsourced to the Cloud Server and lets them handle it dynamically without the company having to add any additional hardware to their server farm.
Which line could be added to the lesson plan to strengthen the teacher’s point?
Different languages and communication styles might hinder your ability to benefit from global learning.
The digital divide will likely prevent you from having a major impact in the global communications environment.
Language and cultural differences will likely make it too frustrating to have an effective learning experience.
Learning in a global community enables you to expand your horizons and learn new languages.
Answer:
ムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダ
Answer:
Learning in a global community enables you to expand your horizons and learn new languages.
Explanation:
Im not sure what the teacher's point is, but the other options seem to hinder students from wanting to learn in a global community. If her goal is to convince students to learn globally then option D is your answer :)
Write the name of test for the given scenario. Justify your answer.
The input values are entered according to the output values. If the results are ok then software is also fine but if results does not matched the input values then means any bugs are found which results the software is not ok. The whole software is checked against one input.
A-Assume you are being hired as a Scrum project Manager. Write down the list of responsibilities you are going to perform.
B-What are the qualifications required to conduct a glass box testing.
C-Write the main reasons of project failure and success according to the 1994 Standish group survey study.
D- Discuss your semester project.
Answer:
Cevap b okey xx
Explanation:
Sinyorrr
I need the SQL statements for these questions:
1. For each reservation, list the reservation ID, trip ID, customer number, and customer last name. Order the results by customer last name.
2. For each reservation for customer Ryan Goff, list the reservation ID, trip ID, and number of persons.
3. List the trip name of each trip that has Miles Abrams as a guide.
4. List the trip name of each trip that has the type Biking and that has Rita Boyers as a guide.
5. For each reservation that has a trip date of July 23, 2016, list the customer’s last name, the trip name, and the start location.
6. List the reservation ID, trip ID, and trip date for reservations for a trip in Maine (ME). Use the IN operator in your query.
7. Repeat Exercise 6, but this time use the EXISTS operator in your query.
8. Find the guide last name and guide first name of all guides who can lead a paddling trip. (Note: The query results should include duplicate values.)
Here are the tables:
CUSTOMER FIRST NAME POSTAL CODE CUSTOMER NUM LAST NAME ADDRESS Northfold Liam 9 Old Mill Rd Londonderry 10 NH 03053 103 Kasuma Sujata 132 Main St. #1 East Hartford CT 06108 MA 01854 Goff 164A South Bend Rd. Lowell Ryan 105 McLean Kyle 345 Lower Ave. Wolcott NY 14590 106 Morontoia Joseph 156 Scholar St Johnston 02919 107 Marchand Quinn 76 Cross Rd Bath NH 03740 108 32 Sheep stop St Edinboro PA Rulf Usch 16412 109 Caron Jean Luc 10 Greenfield St Rome ME 04963 110 Martha York Bers 65 Granite St NY 14592 112 Jones Laura 373 Highland Ave. Somerville MA 02143 115 Nu Adam 1282 Ocean Walk Ocean City Vaccari 08226 116 Murakami Iris 7 Cherry Blossom St. Weymouth MA 02188 119 Londonderry vT Chau 18 Ark Ledge Ln Clement 05148 120 Gernowski Sadie 24 stump Rd. Athens ME 04912 121 Cambridge VT Bretton-Borak Siam 10 Old Main St 122 Hefferson orlagh 132 South St. Apt 27 Manchester NH 03101 123 25 Stag Rd Fairfield Barnett Larry 06824 124 Busa Karen 12 Foster St. South Windsor CT 06074 125 51 Fredrick St Albion Peterson Becca NY 14411 126 Brown Brianne 154 Central St Vernon CT 06066 PHONE Click to Add 603-555-7563 413-555-3212 860-555-0703 781-555-8423 585-555-5321 401-555-4848 603-555-0456 814-555-5521 207-555-9643 585-555-0111 857-555-6258 609-555-5231 617-555-6665 802-555-3096 207-555-4507 802-555-3443 603-555-3476 860-555-9876 857-555-5532. 585-555-0900 860-555-3234
Answer:
Explanation:
/* From the information provided, For now will consider the name of table as TRIPGUIDES*/
/*In all the answers below, the syntax is based on Oracle SQL. In case of usage of other database queries, answer may vary to some extent*/
1.
Select R.Reservation_ID, R.Trip_ID , C.Customer_Num,C.Last_Name from Reservation R, Customer C where C.Customer_Num=R.Customer_Num ORDER BY C.Last_Name
/*idea is to select the join the two tables by comparing customer_id field in two tables as it is the only field which is common and then print the desired result later ordering by last name to get the results in sorted order*/
2.
Select R.Reservation_ID, R.Trip_ID , R.NUM_PERSONS from Reservation R, Customer C where C.Customer_Num=R.Customer_Num and C.LAST_NAME='Goff' and C.FIRST_NAME='Ryan'
/*Here, the explaination will be similar to the first query. Choose the desired columns from the tables, and join the two tables by equating the common field
*/
3.
Select T.TRIP_NAME from TRIP T,GUIDE G,TRIPGUIDES TG where T.TRIP_ID=TG.TRIP_ID and TG.GUIDE_NUM=G.GUIDE_NUM and G.LAST_NAME='Abrams' and G.FIRST_NAME='Miles'
/*
Here,we choose three tables TRIP,GUIDE and TRIPGUIDES. Here we selected those trips where we have guides as Miles Abrms in the GUIDES table and equated Trip_id from TRIPGUIDES to TRIP.TRIP_Name so that can have the desired results
*/
4.
Select T.TRIP_NAME
from TRIP T,TRIPGUIDES TG ,G.GUIDE
where T.TRIP_ID=TG.TRIP_ID and T.TYPE='Biking' and TG.GUIDE_NUM=G.GUIDE_NUM and G.LAST_NAME='Boyers' and G.FIRST_NAME='Rita'
/*
In the above question, we first selected the trip name from trip table. To put the condition we first make sure that all the three tables are connected properly. In order to do so, we have equated Guide_nums in guide and tripguides. and also equated trip_id in tripguides and trip. Then we equated names from guide tables and type from trip table for the desired results.
*/
5.
SELECT C.LAST_NAME , T.TRIP_NAME , T.START_LOCATION FROM CUSTOMER C, TRIP T, RESERVATION R WHERE R.TRIP_DATE='2016-07-23' AND T.TRIP_ID=R.TRIP_ID AND C.CUSTOMER_NUM=R.CUSTOMER_NUM
/*
The explaination for this one will be equivalent to the previous question where we just equated the desired columns where we equiated the desired columns in respective fields and also equated the common entities like trip ids and customer ids so that can join tables properly
*/
/*The comparison of dates in SQL depends on the format in which they are stored. In the upper case if the
dates are stored in the format as YYYY-MM-DD, then the above query mentioned will work. In case dates are stored in the form of a string then the following query will work.
SELECT C.LAST_NAME , T.TRIP_NAME , T.START_LOCATION FROM CUSTOMER C, TRIP T, RESERVATION R WHERE R.TRIP_DATE='7/23/2016' AND T.TRIP_ID=R.TRIP_ID AND C.CUSTOMER_NUM=R.CUSTOMER_NUM
*/
6.
Select R.RESERVATION_ID, R.TRIP_ID,R.TRIP_DATE FROM RESERVATION R WHERE R.TRIP_ID IN
{SELECT TRIP_ID FROM TRIP T WHERE STATE='ME'}
/*
In the above question, we firstly extracted all the trip id's which are having locations as maine. Now we have the list of all the trip_id's that have location maine. Now we just need to extract the reservation ids for the same which can be trivally done by simply using the in clause stating print all the tuples whose id's are there in the list of inner query. Remember, IN always checks in the set of values.
*/
7.
Select R.RESERVATION_ID, R.TRIP_ID,R.TRIP_DATE FROM RESERVATION WHERE
EXISTS {SELECT TRIP_ID FROM TRIP T WHERE STATE='ME' and R.TRIP_ID=T.TRIP_ID}
/*
Unlike IN, Exist returns either true or false based on existance of any tuple in the condition provided. In the question above, firstly we checked for the possibilities if there is a trip in state ME and TRIP_IDs are common. Then we selected reservation ID, trip ID and Trip dates for all queries that returns true for inner query
*/
8.
SELECT G.LAST_NAME,G.FIRST_NAME FROM GUIDE WHERE G.GUIDE_NUM IN
{
SELECT DISTINCT TG.GUIDE_NUM FROM TRIPGUIDES TG WHERE TG.TRIPID IN {
SELECT T.TRIP_ID FROM TRIP T WHERE T.TYPE='Paddling'
}
}
/*
We have used here double nested IN queries. Firstly we selected all the trips which had paddling type (from the inner most queries). Using the same, we get the list of guides,(basically got the list of guide_numbers) of all the guides eds which were on trips with trip id we got from the inner most queries. Now that we have all the guide_Nums that were on trip with type paddling, we can simply use the query select last name and first name of all the guides which are having guide nums in the list returned by middle query.
*/
2.2 Write a program that uses input to prompt a user for their name and then welcomes them. Note that input will pop up a dialog box. Enter Sarah in the pop-up box when you are prompted so your output will match the desired output.
Answer:
Explanation:
The following program is written in Javascript. It creates a prompt that asks the user for his/her name and saves it in a variable called userName. Then it uses that variable to welcome the user. A test case is shown in the images below with the desired output.
let userName = prompt("Enter Your Name")
alert(`Hello ${userName}`)
Which information can you apply to every page of your document with the page layout options?
header
conclusion
body
footer
introduction
Answer:
Header and footer
Explanation:
The page layout tab usually found in document programs such as Microsoft Word hold options used to configure several page options which is to be applied to a document. The page layout option gives users options to set page margins, orientation, page numbering, indentation and the other page layout options which is primarily how we would like our document to look like when printed. The page layout option also allows the insertion of a header and footer which is a note which can be written at the topmost and bottomost part of the document. Once, a header and footer option is selected, it is applied to every page of the document being worked on at the moment.
While configuring a wireless access point device, a technician is presented with several security mode options. Which of the following options will provide the most secure access?
Answer:
Bro this is my area the answer is WPA2 and AES
Explanation:
its because AES is a more secure encryption protocol introduced with WPA2. AES isn't some creaky standard developed specifically for Wi-Fi networks, either. It's a serious worldwide encryption standard that's even been adopted by the US government.
There are many possible variations in wireless network design depending on the surroundings.
What is wireless network?Even in a complicated single site, different wireless networks running on the same hardware as part of the broader wireless LAN environment can have different network configuration fundamentals needed for a successful deployment.
At the same time, a number of essential network configuration activities are part of any successful wireless project's typical chores. Let's look at the broad and specific procedures that wireless experts should take while setting up enterprise-grade Wi-Fi networks.
Therefore, There are many possible variations in wireless network design depending on the surroundings.
To learn more about wifi, refer to the link:
https://brainly.com/question/6145118
#SPJ5
You want to calculate a bonus if the sold price was at least equal to the listing price, and if the house sold within 30 days after being listed.
In cell L12, insert an IF function with a nested AND function to calculate a bonus. The AND function should ensure both conditions are met: Sold Price divided by the Listing Price is greater than or equal to 100% (cell L7) and the Days on Market are less than or equal to 30 (cell L8). If both conditions are met, the bonus is $1,000 (cell L9). Otherwise, the bonus is $0. Use mixed cell references to the input values in the range L7:L9. Copy the function to the range L12:L39.
BA Average Total Sold Highest 1 Location Sold Price Number Sold Dual Agent Total Sol Prices Sold Price Agent Codes and Commission Rates 2 Alpine Carey Buyer's Agent 2.75% 3 American Fork Hernandez DA Dual Agency 5.50% 4 Cedar Hills Pijuan SA Seller's Agent 3.25% 5 Lehi 6 Total Commission by Agent Input for Bonus 7 Carey Percent of List 100% 8 Hernandez Days on Market 30 9 Pijuan Bonus Amount $ 1,000 10 Days on Agent Number City Selling Agen Agent Type Agent Type List Price Sold Price Listing Date Sale Date Bonus 11 Market Commissio 12 1 Cedar Hills Pijuan DA Dual Agency $ 725,000 $ 705,000 4/1/2021 76 6/16/2021 13 4 Lehi Pijuan DA Dual Agency $ 350,799 $ 350,000 4/1/2021 5/25/2021 54 14 5 American Fork Pijuan DA Dual Agency $ 29 385,900 $ 385,900 4/1/2021 4/30/2021 15 6 Alpine Carey SA Seller's Agent $ 500,000 $ 495,800 68 4/3/2021 6/10/2021 16 7 Lehi Pijuan BA Buyer's Agent $ 345,999 $ 345,000 4/3/2021 59 6/1/2021 17 11 American Fork Hernandez DA Dual Agency $ 325,000 $ 320,000 48 4/12/2021 5/30/2021 18 Alpine 12 Pijuan DA Dual Agency $ 750,250 $ 725,900 4/12/2021 11/1/2021 203 19 $ DA 17 Alpine Dual Agency $ Carey 645,000 66 643,000 4/18/2021 6/23/2021 20 19 American Fork Pijuan BA Buyer's Agent $ 425,000 $ 415,000 4/18/2021 6/30/2021 73 21 21 Lehi Pijuan SA Seller's Agent $ 325,000 $ 330,000 4/28/2021 6/1/2021 34 22 24 American Fork Pijuan SA Seller's Agent $ 425,815 $ 418,000 4/28/2021 140 9/15/2021 23 27 Alpine DA Pijuan Dual Agency $ 700,000 $ 705,000 4/30/2021 6/19/2021 50 24 30 Lehi Hernandez SA Seller's Agent $ 365,000 $ 363,000 5/1/2021 6/18/2021 48 25 32 Cedar Hills Carey SA Seller's Agent $ 885,500 $ 800,000 5/1/2021 6/6/2021 36 26 34 Cedar Hills Carey SA Seller's Agent $ 610,000 $ 600,000 5/1/2021 6/26/2021 56 27 35 Cedar Hills Hernandez DA Dual Agency $ 560,700 $ 565,000 5/1/2021 5/30/2021 29 29 36 American Fork Hernandez BA . Buyer's Agent $ 450,000 $ 450,000 5/2/2021 9/30/2021 151 29 43 American Fork Carey BA 9 Buyer's Agent $ 375,000 $ 372,500 5/6/2021 5/15/2021 30 46 Cedar Hills Carey SA Seller's Agent $ 650,000 $ 625,750 5/15/2021 679/2021 25 48 31 Alpine Hernandez DA Dual Agency $ 545,000 $ 560,000 5/22/2021 6/16/2021 25 32 Lehi 53 Carey SA Seller's Agent $ 315,750 $ 320,000 5/28/2021 6/18/2021 21 33 61 Lehi Carey DA Dual Agency $ 300,000 $ 300,000 6/2/2021 9/2/2021 92 34 Alpine 69 Hernandez DA Dual Agency $ 589,000 $ 595,000 20 6/18/2021 7/8/2021 35 70 American Fork Hernandez DA Dual Agency $ 345,670 $ 102 345,000 6/20/2021 9/30/2021 36 73 Cedar Hills Carey BA Buyer's agent $ 555,000 $ 550,000 6 6/24/2021 6/30/2021 37 75 Alpine Carey BA Buyer's Agent $ 475,000 $ 485,000 86 6/24/2021 9/18/2021 38 78 American Fork Carey DA Dual Agency $ 400,000 $ 15 400,000 6/30/2021 7/15/2021 39 80 American Fork Pijuan SA Seller's Agent $ 380,500 $ 365,750 6/30/2021 63 9/1/2021 40 41 42 43 44 Details Map Loan +
Answer:
Following are the solution to the given question:
Explanation:
Please find the following Excel form for calculating the bonus as required. Please ensure the equation is duplicated even so, with the sign "=." It is possible to insert this formula into cell L12. Then cut/paste the cell into other L12:L39 cells.
[tex]=IF(AND(G12/F12 \geq \$L \$7,J12 \leq \$L\$8)=TRUE,\$L\$9,0)[/tex]
The mixed microbial reference here is used in L7, L8, and L9 so these cell references are not moved whenever the formula is copied to L12:L39.
Please verify that whenever the copy has also been copied, the cell formula appears beneath in each cell.
It must be as below in L12.
[tex]=IF(AND(G12/F12 \geq \$L\$7,J12\leq \$L\$8)=TRUE,\$L\$9,0)[/tex]
It must be as follows in L13.
[tex]=IF(AND(G13/F13\geq \$L\$7,J13\leq \$L\$8)=TRUE,\$L\$9,0)[/tex]
and so on.
Write a class Example() such that it has a method that gives the difference between the size of strings when the '-' (subtraction) symbol is used between the two objects of the class. Additionally, implement a method that returns True if object 1 is greater than object 2 and False otherwise when the (>) (greater than) symbol is used. For example: obj1
Answer:
Here the code is given as follows,
Explanation:
class Example:
def _init_(self, val):
self.val = val
def _gt_(self, other):
return self.val > other.val
def _sub_(self,other):
return abs(len(self.val) - len(other.val))
def main():
obj1 = Example('this is a string')
obj2 = Example('this is another one')
print(obj1 > obj2)
print(obj1 - obj2)
main()
Output:-
Write a Python program square_root.py that asks a user for an integer n greater or equal to 1. The program should then print the square root of all the odd numbers between 1 and n (Including n if n is odd). Print the square roots rounded up with no more than two digits after the decimal point.
Answer:
import math
n = int(input("Enter n: "))
for number in range(1, n+1):
if number % 2 == 1:
print("{:.2f}".format(math.sqrt(number)), end=" ")
Explanation:
In order to calculate the square roots of the numbers, import math. Note that math.sqrt() calculates and gives the square root of the given number as a parameter
Ask the user to enter the n
Create a for loop that iterates from 1 to n+1 (Since n is included, you need to write n+1)
Inside the loop, check whether the number is odd or not using the if structure and modulo. If the number is odd, calculate its square root using the math.sqrt() and print the result with two digits after the decimal
An e-mail program allows?
A. users to access and view web pages on the internet.
B. geographically separated people to transfer audio and video.
C. real-time exchange of messages or files with another online user.
D. transmission of messages and files via a network such as the internet.
Answer:
C
Explanation:
Real time exchange of messages or files with another online user
A small company with 100 computers has hired you to install a local area network. All of the users perform functions like email, browsing and Office software. In addition, 25 of them also do a large number of client/server requests into a database system. Which local area network operating system would you recommend?
Answer:
Answer to the following question is as follows;
Explanation:
Windows 7 for 100 users and Windows 8.1 for 25 users are the best options since they both enable networking and active directory, and Windows 8.1 also offers Windows server capabilities.
Winxp would therefore work for $100, but it is unsupported and has no updates.
If you wish to go with open source, you can choose Ubuntu 16 or 18 or Linux.
Why is OS important in every data processing system?
Please Answer Fast!
Answer:
Functions of an operating system. An operating system provides three essential capabilities: It offers a UI through a CLI or GUI; it launches and manages the application execution; and it identifies and exposes system hardware resources to those applications -- typically, through a standardized API.
Explanation:
Giải thích mục đích của các thao tác open() và close().
Answer:
Which lan is it
Answer:
Đang học năm nhất trường TDT đúng k bạn :D
Explanation:
Write a program in Cto define a structure Patient that has the following members
Answer:
Explanation:
The answer should be 1.16 or 61.1
you are installing two new hard drives into your network attached storage device your director asks that they be put into a raid solution that offers redundndancy over performance which would you use
Question options:
a. RAID 0
b. RAID 1
c. RAID 5
d. RAID 6
e. RAID 10
Answer:
d. RAID 6
Explanation:
RAID is Redundant Array of Inexpensive/Independent Disks. RAID combines low cost physical hard disk drives in one hard disk drive. RAID is used to achieve data redundancy(data backup but with synchronization) or improved performance or both.
To get what the director requires he would need to use RAID 6. RAID 6 is RAID level optimized to achieve data redundancy but with slow performance.
A computer with a five-stage pipeline deals with conditional branches by stalling for the next three cycles after hitting one. How much does stalling hurt the performance if 20% of all instructions are conditional branches
Answer:
The stalling hurt the performance by 60%.
Explanation:
This can be calculated as follows:
Value of CPI ideally taken by pipeline = 1
From the question, we are given:
Stall frequency = 20%,
Number of frequency = 3
Therefore, we have:
Cycles per instruction (CPI) of the architecture = Value of CPI ideally taken by pipeline + (Stall frequency * Number of frequency) = 1 + (20% * 3) = 1.60
Amount by which the stalling hurt the performance = Cycles per instruction (CPI) of the architecture Value of CPI ideally taken by pipeline = 1 - 0.60 = 0.60, or 60%
Therefore, the stalling hurt the performance by 60%.
9.17 LAB: Acronyms An acronym is a word formed from the initial letters of words in a set phrase. Write a program whose input is a phrase and whose output is an acronym of the input. If a word begins with a lower case letter, don't include that letter in the acronym. Assume there will be at least one upper case letter in the input.
Answer:
Hence the code is given as follows,
import java.util.Scanner;
public class LabProgram {
public static String createAcronym(String userPhrase){
String result = "";
String splits[] = userPhrase.split(" ");
for(int i = 0;i<splits.length;i++){
if(splits[i].charAt(0)>='A' && splits[i].charAt(0)<='Z')
result += splits[i].charAt(0);
}
return result;
}
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
String s = scan.nextLine();
System.out.println(createAcronym(s));
}
}
Write a function int checkBalance(char exp[]); that can take an expression as input and check whether the parenthesis used in that expression are valid or invalid. It returns 1 if it is valid, and returns 0 if it is not valid.For example, the following expressions are valid: [ A * {B (C D)}] and [{()()}]The following expressions are invalid: [ A * {B (C D})], [ { ( ] ) ( ) }
Answer:
Explanation:
The following code is written in Java. It uses for loops to loop through the array of characters, and uses IF statements to check if the symbols in the expression are balanced. If so it returns true, otherwise it breaks the function and returns false. Two test cases have been provided in the main method and the output can be seen in the attached image below.
import java.util.ArrayList;
class Brainly {
public static void main(String[] args) {
char[] exp = { '[', 'A', '*', '{', 'B', '(', 'C', 'D', ')', '}', ']'};
char[] exp2 = {'[', 'A', '*', '(', 'C', '}', ']'};
System.out.println(checkBalance(exp));
System.out.println(checkBalance(exp2));
}
public static boolean checkBalance(char exp[]) {
ArrayList<Character> symbols = new ArrayList<>();
for (char x: exp) {
if ((x =='[') || (x == '{') || (x == '(')) {
symbols.add(x);
}
if (x ==']') {
if (symbols.get(symbols.size()-1) == '[') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
if (x =='}') {
if (symbols.get(symbols.size()-1) == '{') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
if (x ==')') {
if (symbols.get(symbols.size()-1) == '(') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
}
return true;
}
}
Resize vector countDown to have newSize elements. Populate the vector with integers {newSize, newSize - 1, ..., 1}. Ex: If newSize = 3, then countDown = {3, 2, 1}, and the sample program outputs:
#include
#include
using namespace std;
int main() {
vector countDown(0);
int newSize = 0;
int i = 0;
newSize = 3;
STUDENT CODE
for (i = 0; i < newSize; ++i) {
cout << countDown.at(i) << " ";
}
cout << "Go!" << endl;
return 0;
}
Answer:
Following are the code to the given question:
#include <iostream>//defining header file
#include <vector>//defining header file
#include <numeric>//defining header file
using namespace std;
int main()//main method
{
vector<int> countDown(0);//defing an integer array variable countDown
int newSize = 0;//defing an integer variable newSize that holds a value 0
int i = 0;//defing an integer variable i that initialize with 0
newSize = 3;// //use newSize to hold a value
countDown.resize(newSize,0);// calling the resize method that accepts two parameters
for (i = 0; i < newSize; ++i)//defining a loop that reverse the integer value
{
countDown[i] = newSize -i;//reverse the value and store it into countDown array
cout << countDown.at(i) << " ";//print reverse array value
}
cout << "Go!" << endl;//print message
return 0;
}
Output:
3 2 1 Go!
Explanation:
In the given code inside the main method an integer array "countDown" and two integer variables "newSize and i" is declared that initializes a value that is 0.
In the next step, an array is used that calls the resize method that accepts two parameters, and define a for a loop.
In this loop, the array is used to reverse the value and print its value with the message.
Add (total) all the number in the list (below) using a for loop, but skip over the number at index 3.
numbers = [10,20,30,40,50,60,100]
Answer:
The program in Python is as follows:
numbers = [10,20,30,40,50,60,100]
total = 0
for i in range(len(numbers)):
if i != 3:
total+=numbers[i]
print(total)
Explanation:
This initializes the list
numbers = [10,20,30,40,50,60,100]
Set total to 0
total = 0
This iterates through numbers
for i in range(len(numbers)):
This ensures that the index 3, are not added
if i != 3:
total+=numbers[i]
Print the calculated sum
print(total)
Spending plans serve as a tool to analyze program execution, an indicator of potential problems, and a predictor of future program performance. True False
Answer:
True
Explanation:
Spending plans serve as a tool to analyze program execution, an indicator of potential problems, and a predictor of future program performance.
How many fingers do you need to type floor
Answer:
About 0-1 fingers at minimum
Explanation:
you can type with your toes/elbow as well. Any body part really.
To type the word "floor" on a regular keyboard layout, you would generally need six fingers: three on your left hand and three on your right.
Your index finger (usually used for the "F" key) on your left hand would be utilised for the letter "f." Your middle finger (which is normally used for the "D" key) would be utilised for the letter "l."
Finally, your ring finger (which is normally used for the "S" key) would be utilised for the letter "o."
Your index finger (usually used for the "J" key) on your right hand would be utilised for the letter "o." Your middle finger (which is normally used for the "K" key) would be utilised for the second letter "o."
Finally, your ring finger (which is normally used for the "L" key) would be utilised for the letter "r."
Thus, on a typical keyboard layout, you would type the word "floor" with three fingers from each hand.
For more details regarding Keyboard layout, visit:
https://brainly.com/question/17182013
#SPJ6
Which statement is NOT a source of threats?
a.
Poor management decisions, accidents and natural disasters.
b.
Data recovery
c.
financial mistakes
d.
loss of customers
Answer:
B
Explanation:
because data is phone business
