Answer & Explanation:
One can pick up a nail using the curved part of the horseshoe magnet farthest from the poles. A horse shoe magnet has magnetic fields all around it. In the presence of magnetic force fields, any magnetic object will be attracted to it.
One can pick up a nail using the curved part of the horseshoe magnet farthest from the poles.
What is magnet?A substance which is negative charged at one end and positive charged at another end creating the magnetic field around it.
A nail is a magnet which can attract the particle which are charged.
A horse shoe magnet also has magnetic fields around it. In the presence of magnetic force fields, any magnetic object will be attracted to it.
Thus. one could pick up a nail using the curved part of the horseshoe magnet farthest from the poles.
Learn more about magnet.
https://brainly.com/question/2841288
#SPJ2
1. A ball rolls off of a table with a speed of 3.2 m/s. The table is 1.6 m high.
a) When does the ball hit the ground? (time)
b) How far away from the base of the table does the ball travel?
c) With what vertical speed does the ball hit the floor?
Answer:
Explanation:
for vertical displacement h = 1.6 , let time taken be t , initial vertical velocity = 0
h = ut + 1/2 g t²
= 1/2 g t²
1.6 = .5 x 9.8 x t²
t² = .3265
t = .57 s
b )
velocity in horizontal direction = 3.2 m /s
horizontal displacement
= 3.2 x .57 = 1.82 m
c )
for vertical movement
v = u + gt
= 0 + 9.8 x .57
= 5.58 m /s
How can the potential energy in magnets be used to create kinetic energy in an object without making contact?
Answer: If you move a magnet quickly through a coil of copper wire, the electrons will move - this produces electricity.
Explanation:
A parallel circuit contains a battery with a voltage of 9 V. The total resistance in the circuit is 18 ohms. Which claim about the current in the circuit can be supported mathematically from the relationships between voltage, current, and resistance? A.
the current flowing through the circuit is 0.5 amps because current is related to voltage and resistance by the formula I = V/R
B.
the current flowing through the circuit is 162 amps because current is related to voltage and resistance by the formula I = VR
C.
the current flowing through the circuit is 27 amps because current is related to voltage and resistance by the formula I = R + V
D.
: the current flowing through the circuit is 2 amps because current is related to voltage and resistance by the formula I = R/V
Answer:
Its C I fell confident
Explanation:
I took 2 hrs I tried on this for u dont get mad have a wonderful day :D
So the incorrect option is C the current flowing through the circuit is 27 amps because the current is related to voltage and resistance by the formula I = R + V
What is resistance?Resistance is a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms, symbolized by the Greek letter omega (Ω).
Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current and resistance.
Ohm's Law is a formula used to calculate the relationship between voltage, current and resistance in an electrical circuit.
To students of electronics, Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists.
E = I x R
So the incorrect option is C the current flowing through the circuit is 27 amps because the current is related to voltage and resistance by the formula I = R + V
To know more about Resistance follow
https://brainly.com/question/17563681
Circle the letter of each factor that determines whether a molecule
is polar or nonpolar.
a. the number of atoms in the molecule
b. the type of atoms in the molecule
c. the number of bonds in the molecule
d. the shape of the molecule
What do all elements in a column in the periodic table have in common? (2 points)
Answer:
Each column is called a group. The elements in each group have the same number of electrons in the outer orbital. Those outer electrons are also called valence electrons. They are the electrons involved in chemical bonds with other elements.
Explanation:
The small piston of a hydraulic lift has an area of 15 cm². A car weighing 45,000 N is placed on the 2500 cm² large piston. How much force is required on the small piston to lift the car?
Explanation:
I believe the answer is 12 N
A cube of wood exerts a pressure of 2 pa. When it is placed on a floor. What is the force by the cube if its surface is 5 cm²
Pressure exerted by the wooden cube = 2 Pa
Surface area of cube = 5 cm² = 0.0005 m²
Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Formula of Pressure:
[tex] \boxed{ \bf{P = \dfrac{F}{A}}}[/tex]
P → Pressure
F → Force
A → Surface Area
By substituting values in the formula, we get:
[tex] \rm \longrightarrow 2 = \dfrac{F}{0.0005} \\ \\ \rm \longrightarrow F = 2 \times 0.0005 \\ \\ \rm \longrightarrow F = 0.001 \: N \\ \\ \rm \longrightarrow F = 1 \: mN[/tex]
[tex] \therefore [/tex] Force applied by the cube on the floor = 1 mN
How many times more gravitational potential energy would the same lander have on top of a 350-m hill on Earth? It would have times more gravitational potential energy
Answer:
6
Explanation:
Just did it.
The gravitational potential energy would the same lander have on top of a 350-m hill on Earth is 6.
What is gravitational potential energy?If an object is lifted, work is done against gravitational force. The object gains energy.
The equation for calculating gravitational potential energy is
GPE =mgh
where, GPE is the gravitational potential energy, m is the mass, h is the change in height and g is the acceleration due to gravity.
The heavier the particle and the higher it is over the ground, the more gravitational potential energy it holds. Gravitational potential energy increments as weight and level increments.
Given is the height of hill h = 350m.
Thus, the same lander will have the the potential energy 6 times more.
Learn more about gravitational potential energy
https://brainly.com/question/3884855
#SPJ2
Is static electricity more harmful than it is helpful or vice versa
Answer:
You might even see a spark if the discharge of electrons is large enough. The good news is that static electricity can't seriously harm you. Your body is composed largely of water and water is an inefficient conductor of electricity, especially in amounts this small. Not that electricity can't hurt or kill you.
Explanation:
You might even see a spark if the discharge of electrons is large enough. The good news is that static electricity can't seriously harm you. Your body is composed largely of water and water is an inefficient conductor of electricity, especially in amounts this small. Not that electricity can't hurt or kill you.
What is mean by speed?
Answer:
Speed is acceleration or a high rate of motion
Answer:
the rate at which something or someone moves or operates or is able to move or operate .
A 6.00 kg box is pulled to the left across a frictionless surface by a force of 20.0 N directed at 45o above the horizontal. The box does not move vertically. 20.0 N 45.0o 6.00 kg a) Resolve the 20.0 N vector into its horizontal and vertical components, using the trigonometric functions. b) Determine the magnitude of the normal force (will it be equal to the weight?). c) Determine the magnitude and direction of the acceleration.
How much time will it take for a truck to travel 20 meters if it is traveling at 4 m/s?
Answer:
The answer is 5 sExplanation:
The time taken can be found by using the formula
[tex]t = \frac{d}{v} \\ [/tex]
d is the distance
v is the velocity
From the question we have
[tex]t = \frac{20}{4} \\ [/tex]
We have the final answer as
5 sHope this helps you
Is it okay to keep an albino gecko
Answer:
Yes
Explanation:
please help! also specify if you are saying the question letter or the letter on the track when u answer :)
A fire is burning in a fireplace. Where is the radiation?
A. You touch warm bricks next to the fireplace
B. You can feel the heat from across the room
C. Heat is rising up from the chimney
HELP MEEEEEEE
Which choice is the smallest in mass? neutron nucleus proton electron
Answer:
electron
Explanation:
John has gradually added time to his running routine to reach his goal of running a 5k. John has reached his goal of running a 5k without stopping. This achievement is an example of
Answer:
pursuing a goal
Explanation:
Since there are no answer choices provided I would say that this is an example of pursuing a goal. This is basically all of the tasks and struggles that an individual must go through in order to finally achieve a certain goal. It also involves gradually breaking barriers and pushing forward by increasing the complexity of the tasks until you are able to break through all of them to reach the end-goal that you have been striving for. Which is exactly what John has been doing in this scenario by gradually increasing his running time.
Please get it right!! I'm bad at school there's literally no point in learning this so help please.
Ok the question is....
Which model shows a molecule of a substance that is made up of three elements?
How many kilograms in 17,000 mg?
Location A on the surface of Earth bas a much higher temperature than Location Which statement is most likely true A.Both locations are at the poles B.Both are at the equator C.Location A is at the equator and Location B is the poles D.Location at the poles and location B is the equator
Answer:
The anwser is b
Explanation:
Answer:
the answer is B
I know because i just did it
How do atoms of different non metals stabilize themselves?
Pls help
Answer:
by taking other atoms that have one shell and putting it i the spot that they need t in
Explanation:
For resonance to occur, the object must experience a frequency equal to its what?
period
wavelength
amplitude
natural frequency
Answer:
natural frequency
Explanation:
Answer: correct answer is {d}
Explanation: i got it right on my assesment
Katie is making a strawberry milkshake in her blender. A 0.05kg strawberry is rapidly spun around the inside of the container with a speed of 11.0 m/s, held by a centripetal force of 12.0 N. What is the radius of the blender at the strawberry’s location? Round answers to two decimal places.
Answer:
The radius of the blender is approximately 0.5041[tex]\bar 6[/tex] meters
Explanation:
The given parameters are;
The mass of the strawberry, m = 0.05 kg
The speed with which the strawberry is spun, v = 11.0 m/s
The centripetal force holding the strawberry = 12.0 N
The formula for the centripetal force, [tex]F_c[/tex], is given as follows;
[tex]F_c = \dfrac{m \cdot v^2}{r}[/tex]
Where;
r = The radius of the centripetal rotation, which is the radius of the blender
[tex]\therefore r = \dfrac{m \cdot v^2}{F_c}[/tex]
Substituting the values gives;
[tex]\therefore r = \dfrac{0.05 \times 11^2}{12} = \dfrac{121}{240} \approx 0.5041 \bar 6[/tex]
The radius of the blender, r ≈ 0.5041[tex]\bar 6[/tex] meters.
A projectile was fired from ground with 50 m/s initial velocity at 45 degree angle. How long will stay in the air? What is range? What is the maximum height the projectile?
Answer:
1. Time of flight = 7.22 s
2. Range = 255.10 m
3. Maximum height = 63.77 m
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 50 m/s
Angle of projection (θ) = 45°
Time of flight (T) =?
Range (R) =?
Maximum height (H) =?
1. Determination of the time of flight
Initial velocity (u) = 50 m/s
Angle of projection (θ) = 45°
Acceleration due to gravity (g) = 9.8 m/s²
Time of flight (T) =?
T = 2uSine θ /g
T = 2 × 50 Sine 45 / 9.8
T = 100 × 0.7071 /9.8
T = 7.22 s
2. Determination of the range.
Initial velocity (u) = 50 m/s
Angle of projection (θ) = 45°
Acceleration due to gravity (g) = 9.8 m/s²
Range (R) =?
R = u²Sine 2θ /g
R = 50² × Sine (2×45) /9.8
R = 2500 × Sine 90 /9.8
R = 2500 × 1 / 9.8
R = 255.10 m
3. Determination of the maximum height.
Initial velocity (u) = 50 m/s
Angle of projection (θ) = 45°
Acceleration due to gravity (g) = 9.8 m/s²
Maximum height (H) =
H = u²Sine²θ /2g
H = 50² × (Sine 45)² / 2 × 9.8
H = 2500 × (0.7071)² / 19.6
H = 63.77 m
Answer:
Time spent in the air is 7.22 sThe range of the projectile is 255.1 mThe maximum height of the projectile is 63.77 mExplanation:
Given;
initial velocity of projection, u = 50 m/s
angle of projection, θ = 45°
Time spent in the air is the time of flight, given as;
[tex]T = \frac{2usin \theta}{g}\\\\T = \frac{2(50)sin (45)}{9.8}\\\\T = 7.22 \ s[/tex]
The range of the projectile is given by;
[tex]R = \frac{u^2sin(2\theta)}{g}\\\\R = \frac{u^2sin(2*45)}{g}\\\\ R = \frac{u^2sin(90)}{g}\\\\ R = \frac{u^2(1)}{g}\\\\R=R_{max} = \frac{u^2}{g} =\frac{50^2}{9.8} = 255.1 \ m[/tex]
The maximum height of the projectile is given by;
[tex]H = \frac{u^2sin^2\theta}{2g}\\\\H = \frac{(50)^2sin^2(45)}{2*9.8}\\\\H = 63.77 \ m[/tex]
Andy has been consuming a set number of calories and recently added an additional 100 calories in the form of a daily snack. Although he is not trying to lose weight, he has lost one pound per week over the last two months. He wants to increase his level of activity and exercise, and he wants to return to his weight from two months ago. Which strategy should he follow to prevent becoming underweight?
Increase his activity and exercise levels and add more calories to gradually gain weight
Increase his activity and exercise levels and eat the same number of calories to gradually gain weight
Increase his snacks to two or three per day until he reaches his target weight
Increase his calories consumed and do less activity and exercise until he reaches his target weight
Answer:
Increase his activity and exercise levels and add more calories to gradually gain weight
Explanation:
A flashlight that is powered by 3 Volts and uses a bulb with a
resistance of 68. will have a current of Amps
n
Which of the following has a crystalline appearance?
baking soda
salt
baking powder
corn starch
Answer:
B: Salt
Explanation:
I answered this correct beforehand.
How could semantics be defined?
A.
as a set of rules that studies how words are broken down into morphemes
B.
as a set of rules that is concerned with understanding the meaning of words
C.
as a set of rules that dictates how vowels and consonants are pronounced
D.
as a set of rules that determines how words can be arranged into sentences
Answer:
its b >.<
Explanation:
just trust me laddies
Semantics can be defined : ( B ) As a set of rules that is concerned with understanding the meaning of words
What are semantics ?Semantics can be defined as the message conveyed by words in a sentence and context where the sentence is placed. It is a set of rules that is concerned with the understanding of words in sentences used in a context.
Hence we can conclude that Semantics can be defined : ( B ) As a set of rules that is concerned with understanding the meaning of words.
Learn more about Semantics : https://brainly.com/question/1253261.
#SPJ2
A car's horn produces a constant frequency of 350 Hz as it passes by Suzy. What is the best estimate of the
frequency Suzy hears after the car passes her?
330 Hz
350 Hz
360 Hz
700 Hz
Answer:
330 Hz
Explanation:
edg2020
The best estimate of the frequency Suzy hears after the car passes her is govern by doppler effect and it is 330 Hz.
What is frequency?Frequency is the number of occurrences of a repeating event per unit of time.
What is Doppler EFFECT?
The Doppler effect is the change in frequency of a wave in relation to an observer who is moving relative to the wave source.
According to the Doppler Effect, the frequency observed by an observer decreases for source going away.
To know more about Doppler Effect here
https://brainly.com/question/15318474
#SPJ2
In lab you submerge 100 g of iron nails at 40 0C in 100 g of water at 20 0 C. Specific heat of iron is 0.12 cal/g∙0C. Equate the heat gained by water to the heat lost by nails and show that the final temperature of water becomes 22.1 0C.
Let T be the final temperature of water and nails (iron).
Given that the initial temperature of 100 g nails, [tex]T_{1F}=40^{\circ}C[/tex].
Specific heat of the iron, [tex]C_F=0.12 cal/g^{\circ}C[/tex].
So, the heat lost by nails [tex]= mC_F(T_{1F}-T}[/tex]
[tex]=100\times 0.12 \times (40-T)\cdots(i)[/tex]
The initial temperature of 100 g water, [tex]T_{1w}=20^{\circ}C.[/tex]
Specific heat of water, [tex]C_w=1 cal/g^{\circ}C[/tex]
So, the heat gained by water [tex]= mC_w(T-T_{1w}}[/tex]
[tex]=100\times 1 \times (T-20)\cdots(ii)[/tex]
As the exergy is conserved, so
the heat lost by the nails = the heat gained by the water
From equation (i) and (ii), we have
[tex]100\times 0.12 \times (40-T)=100(T-20)[/tex]
[tex]\Rightarrow 0.12(40-T)=T-20[/tex]
[tex]\Rightarrow 0.12\times 40 -120T=T-20[/tex]
[tex]\Rightarrow 0.12T+T=4.8+20[/tex]
[tex]\Rightarrow 1.12T=24.8[/tex]
[tex]\Rightarrow T=24.8/1.12= 22.1^{\circ}C[/tex]
Hence, the final temperature of both, iron nails as well as water, become [tex]22.1^{\circ}C[/tex].