Co(NH3)6³ has a maximum absorbance in the UV-Vis of 475 nm and appears yellow-
orange. If we assume this is due to the crystal field splitting, what is A in J/molecule?
What is A in kJ/mole?

The substance with the greatest solubility in water is Ag2SO4, with a Ksp of 1.5 x 10-5.

The solubility of a substance is determined by its solubility product constant (Ksp). The higher the Ksp value, the more soluble the substance is in water.

Ksp is the equilibrium constant for a slightly soluble salt in a saturated solution. It is used to calculate the maximum concentration of ions in a solution at equilibrium. When a solid salt dissolves in water, it dissociates into its constituent ions.

The given values of Ksp for the substances are as follows:

BaF2, Kp = 1.5 x 10^-6

Ca(OH)2, Ksp - 6.5 x 10^-6

SrCros. Ksp = 2.2 x 10^-5

Ag2SO4, Ksp - 1.5 x 10^-5

Zn(103)2, Ksp = 3.9 x 10^-6

For more question on solubility click on

https://brainly.com/question/24057916

#SPJ11

No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .

A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.

The following reactions are involved to determine Cl- concentration,

Case 1:  Fe(NO3)3 (aq.) + Cl-(aq.)   ----> FeCl3(aq.) + NO3-(aq.).

In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.

Case 2 :

AgNO3(aq.) + Cl- (aq.)  ---> AgCl(precipitate) + NO3-.

This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .

To learn more about Solubility Rule

https://brainly.com/question/15596863

#SPJ4

The conjugate base of a neutral acid that donates a proton will have a charge of -1.

When a neutral acid donates a proton, it is undergoing a process called deprotonation, meaning it has lost a proton from its molecular structure. In this reaction, the neutral acid becomes an anion (negatively charged ion) and the proton is picked up by the base, which is then referred to as the conjugate base of the acid. The conjugate base will have a charge of -1 because it now has one extra electron relative to the original neutral acid.
To illustrate this reaction, consider acetic acid (CH3COOH) donating a proton to a base. When the acid donates a proton, it becomes an anion, CH3COO-, and the base, which has gained a proton, is the conjugate base and has a charge of -1.
In summary, when a neutral acid donates a proton, the conjugate base will have a charge of -1.

For more such questions on acids

https://brainly.com/question/25148363

#SPJ11

In geologic strontium isotopic analysis by ICP-MS, the use of a collision cell with CH3F helps reduce isobaric interference between 87Rb+ and 87Sr+.

The ability to quantify each element's distinct isotopes makes ICP-MS useful for laboratories looking to compare the ratio of two isotopes of an element or one particular isotope.

Only a few elements cannot be measured by ICP-MS: F and Ne (which cannot be ionized in an argon plasma), Ar, N, and O (which are present at high levels in the plasma and air), and H and He (which are below the mass range of the mass spectrometer).

To know more about strontium isotopic visit:-

https://brainly.com/question/2496592

#SPJ1

Answer: 1:1

Explanation:

Since Na trades place with Na it makes it 1:1

The atomic mass of uranium would be approximately 238.453 u.

To calculate the atomic mass of uranium, we need to take into account the percent abundance and mass of each isotope.

The atomic mass of an element is calculated by taking the weighted average of the masses of each isotope, where the weighting factor is the percent abundance of each isotope.

Let's begin by calculating the contribution of each isotope to the atomic mass of uranium:

To calculate the atomic mass, we can multiply the mass of each isotope by its percent abundance (in decimal form), and then add the products together:

Atomic mass of uranium = (238.050788 u x 0.997) + (235.043929 u x 0.003)

Atomic mass of uranium = 237.748013 u + 0.705132 u

Atomic mass of uranium = 238.453 u

Therefore, the atomic mass of uranium is approximately 238.453 u.

More on atomic mass can be found here: https://brainly.com/question/17067547

#SPJ1

The SI unit of pressure is the Pascal (Pa).

The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.

What is Pressure?

Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.

At lower elevations, atmospheric pressure is higher compared to higher elevations.

Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.

Learn more about Pressure from given link

https://brainly.com/question/28012687

#SPJ1

The electron representation shows the electrons in the atoms as dots as in the image attached.

An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.

Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.

Learn more about electron dot:https://brainly.com/question/25929171

#SPJ1

Answer:

Liquid nitrogen can be used to freeze biological tissue. Liquid nitrogen is -210°C which will stop all biological decomposition in the tissue and preserve it.

Explanation:

To draw a Lewis structure that obeys the octet rule for each of the molecules and ions listed, simply follow the steps outlined above and make sure that each atom has a formal charge of zero or close to zero.

For each of the molecules and ions listed, you can draw a Lewis structure that obeys the octet rule by following these steps:

1. Identify the central atom: The first atom listed in each molecule or ion is the central atom.

2. Count the number of valence electrons: Each atom has a certain number of valence electrons based on its position in the periodic table.

3. Form single bonds: Make single bonds between the central atom and each of the other atoms to use up the available valence electrons.

4. Add lone pairs: If the central atom still has electrons remaining, add lone pairs to satisfy the octet rule.

5. Check the formal charges: Make sure all atoms have formal charges of zero or close to zero.

Let's look at each molecule and ion individually:

a. POCl3, SO42−, XeO4, PO43−, ClO4−:

POCl3: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

SO42−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

XeO4: The central atom is xenon (Xe) and it has 8 valence electrons. We form single bonds between the Xe atom and each of the other atoms, giving Xe a total of 8 electrons. The formal charge of each atom is zero.

PO43−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

ClO4−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

b. NF3, SO32−, PO33−, ClO3−:

NF3: The central atom is nitrogen (N) and it has 5 valence electrons. We form single bonds between the N atom and each of the other atoms, giving N a total of 8 electrons. The formal charge of each atom is zero.

SO32−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

PO33−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

ClO3−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

c. ClO2−, SCl2, PCl2−:

ClO2−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

SCl2: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

PCl2−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

For more such questions on Lewis structure

https://brainly.com/question/20300458

#SPJ11

To convert the volume of Substance A to the volume of Substance B at STP, you can use the principle of molar volume, which states that one mole of any gas at standard temperature and pressure (STP) occupies a volume of 22.4 liters. Here are the steps:

Determine the number of moles of Substance A using its volume and molar volume at STP:

Number of moles of Substance A = Volume of Substance A / Molar volume at STP (22.4 L)

STP stands for "Standard Temperature and Pressure," which is a set of standard conditions used for measuring and comparing physical and chemical properties of gases.

The standard temperature is typically defined as 0 degrees Celsius (273.15 Kelvin), while the standard pressure is typically defined as 1 atmosphere (atm) or 101.325 kilopascals (kPa). At STP, one mole of any gas occupies a volume of 22.4 liters.

STP is commonly used in chemistry and physics to compare gas volumes, to determine molar masses, and to calculate other properties of gases. It is also useful for converting between different units of gas volume, pressure, and temperature.

To know more about STP visit :

https://brainly.com/question/29356493

#SPJ1

Gram-negative bacteria appear as pink/red under the microscope after counterstaining with safranin. In conclusion, the appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless.

The appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless. Gram staining is a common microbiological method that is used to differentiate bacteria into two categories: Gram-positive and Gram-negative. This differentiation is based on differences in the composition of their cell walls. Gram staining is used to identify bacteria and fungi by staining the samples with crystal violet and iodine, then decolorizing with ethanol and counterstaining with safranin. This method helps to determine the presence or absence of a thick layer of peptidoglycan in the cell wall of bacteria. In Gram-negative bacteria, the decolorizing agent, ethyl alcohol, remove the outer membrane, causing the crystal violet stain to be removed from the cell wall, therefore resulting in a colorless appearance. The alcohol also increases the permeability of the thin peptidoglycan layer, which makes the safranin stain visible in the cell wall of the bacteria.

To learn more about Gram-negative bacteria :

https://brainly.com/question/28985258

#SPJ11

Burning your mouth on a hot spoon(option D) is an example of heat transfer through conduction, as the spoon is in direct contact with your mouth.

Conduction is the transfer of heat or electrical energy between two objects that are in direct contact with each other, or between two parts of the same object that are at different temperatures.

In conduction, the energy transfer occurs due to the collision of molecules in the objects or materials. When two objects are in contact, the molecules of the warmer object vibrate more rapidly, colliding with the molecules of the cooler object, which have less energy.

These collisions transfer thermal energy from the warmer object to the cooler object, until both objects reach the same temperature.

Learn about conduction here https://brainly.com/question/20493362

#SPJ1

The volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

What is pressure ?

Pressure is a physical quantity that measures the force exerted per unit area. It is a measure of how much force is distributed over a certain area. Pressure is important in many areas of science and engineering, including fluid mechanics, thermodynamics, and materials science.

At standard temperature and pressure (STP), which is commonly defined as a temperature of 0°C (273.15 K) and a pressure of 1 atm (101.3 kPa), the molar volume of any ideal gas is 22.4 L/mol. However, in this problem, we are given the amount of gas in moles and not at STP, so we need to use the ideal gas law to solve for the volume.

The ideal gas law is given by the equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.

We are given that the container holds 0.25 moles of oxygen gas. The temperature is not specified, but we are told that the gas is at room temperature, which is typically around 20°C (293.15 K). The pressure is also not specified, but we can assume that it is approximately equal to the standard atmospheric pressure of 1 atm.

Plugging in these values into the ideal gas law equation, we get:

V = (nRT)/P

V = (0.25 mol)(0.08206 L·atm/(mol·K))(293.15 K)/1 atm

V = 6.03 L

Therefore, the volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

To know more about Temperature visit :-

https://brainly.com/question/25677592

#SPJ1

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

A) To solve this problem, we can use the formula for the ionization constant of water:

Kw = [H3O+][OH-]

At 50 oC, Kw = 5.476 x 10-14. We can assume that [H3O+] and [OH-] are equal since we are dealing with pure water.

Therefore,

[H3O+] = [OH-] = sqrt(Kw) = sqrt(5.476 x 10-14) = 7.40 x 10-8 mol/L

pH = -log[H3O+] = -log(7.40 x 10-8) = 7.13

pOH = -log[OH-] = -log(7.40 x 10-8) = 7.13

To find the values for pure water at 60oC, we can use the new value of Kw at that temperature:

Kw = 9.550 x 10-14

[H3O+] = [OH-] = sqrt(Kw) = sqrt(9.550 x 10-14) = 3.09 x 10-7 mol/L

pH = -log[H3O+] = -log(3.09 x 10-7) = 6.51

pOH = -log[OH-] = -log(3.09 x 10-7) = 6.51

b) i) No, it does not mean that pure water becomes more acidic as the temperature rises.

ii) The correct answer is 2. As the temperature increases, the ionization of water increases and more H3O+ and OH- ions are formed. However, since the concentration of H2O is also decreasing due to the increase in temperature, the increase in ionization does not result in an increase in [H3O+] and pH actually decreases.

The He element is the one that is hardest to ionize.

The correct answer is He.

An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.

An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ1

There is no limiting reactant because both reactants produce the same amount of products indicating that neither reactant is in excess and both are fully consumed in the reaction.

The limiting reagent is described as  the reactant that is completely used up in a reaction, and thus determines when the reaction stops.

calculating the number of moles of each reactant of the equation:

C2H4 + 3 O2 -> 2 CO2 + 2 H2O.

Moles of C2H4: not given, assume 1 mole

Moles of O2: 3 moles (given in the equation)

Moles of CO2 produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of H2O produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of CO2 produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

Moles of H2O produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

In conclusion, both reactants produce the same amount of products (2 moles of CO2 and 2 moles of H2O).

Learn more about limiting reagent at: https://brainly.com/question/30991317

#SPJ1

The vapor pressure for methanol at 44.6°C is 36.2 kPa.

The Clausius-Clapeyron equation has a relation to the vapor pressure of a substance to its enthalpy of vaporization and temperature and is expressed :

ln(P2/P1) = -(ΔHvap/R) x (1/T2 - 1/T1)

given values are:

P1 = 101.3 kPa

T1 = 100.0°C = 373.2 K

ΔHvap = 40.7 kJ/mol

R = 8.314 J/(mol K)

r P2 at T2 = 44.6°C = 317.8 K:

ln(P2/101.3) = -(40.7 x 10^3 J/mol / (8.314 J/(mol K) x 317.8 K)) x (1/317.8 K - 1/373.2 K)

ln(P2/101.3) = -3.04

P2/101.3 = e^(-3.04)

P2 = 36.2 kPa

Learn more about vapor pressure at: https://brainly.com/question/2693029

#SPJ1

Typically, you must identify the x- and y-axes, which represent the two variables being measured or compared, in order to label a graph.

The graph's shape must be examined in order to determine the type of relationship between the variables. The relationship is considered to be linear if the graph depicts a straight line. The relationship is non-linear if the graph shows a curve. To determine whether the relationship is positive or negative, you would also need to look at the line's slope and direction. The relationship is positive if the line slopes upwards from left to right; this indicates that as one variable rises, so does the other. The relationship is negative if the line slopes downward from left to right, indicating that one variable increases while the other decreases.

To know more about Variables, visit:

https://brainly.com/question/17344045

#SPJ1

Option (d) is correct. Toluene undergo undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio. Because toluene has less steric hindrance.

Toluene is defined as a substituted aromatic hydrocarbon. Toluene is a colorless, water-insoluble liquid with the smell associated with paint thinners. Toluene is a mono-substituted benzene derivative consisting of a methyl group attached to a phenyl group. The IUPAC name of toluene is methylbenzene. Steric hindrance is defined as the slowing of chemical reactions due to steric bulk. Steric hindrance manifested in intermolecular reactions whereas discussion of steric effects often focus on intramolecular interactions. It is often exploited to control selectivity such as slowing unwanted side-reactions.

To learn more about Toluene

https://brainly.com/question/8696404

#SPJ4

The complete question is,

Which of the following mono alkyl benzenes undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio ?

A. ethylbenzene

B. propyl benzene

C. tert-butylbenzene

D. toluene

The possible e₁ product of the given reaction is given below in the  image format.

Alkene products are produced in mixes via the elimination process. According to Zaitsev's rule, base-induced elimination results in the primary alkene product being the more strongly substituted double bond.

An chemical process known as a unimolecular elimination (E1) produces a double bond by removing an H-X substituent from an organic molecule. Because the creation of the carbocation intermediate (similar to an SN1 reaction) from simply the X substituent departing on its own is the reaction's rate-limiting step, it is unimolecular in nature:

A two-step process called an E1 elimination reaction uses a carbocation intermediate:

The elimination of the departing group is the mechanism's initial phase. In this instance, the bromine is the departing group.

The removal of a proton and creation of a double bond constitute the mechanism's second stage. The three substituents on the carbocation in this instance are all equivalent. The mechanism is demonstrated below:

Learn more about E1 products:

https://brainly.com/question/29490944

#SPJ4

Na, or sodium, is the right response. Among the listed elements, sodium has the lowest IE1 value. The energy needed to remove one electron from a neutral atom when it is in the gaseous form is known as the first ionisation energy (IE1).

A soft, silvery-white, highly reactive metal that is a member of the periodic table's alkali metal family is sodium (Na). Its atomic mass is 22.99 and it has an atomic number of 11. Sodium is a crucial element used in many processes, such as making alloys, chemicals, and electrical parts. It is a frequent component of table salt (NaCl) and other nutritional sources and is also a necessary element for living things. In the human body, sodium regulates fluid balance, nerve transmission, and muscle contraction. However, consuming too much salt has been related to a number of illnesses, such as high blood pressure and cardiovascular disease.

Learn more about Na here:

https://brainly.com/question/24808943

#SPJ4

Using CH3NH2 and CH3NH3Cl, one may simulate the blood's buffering properties. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer system.

Carbonic acid and sodium bicarbonate. Hint: Human blood has a buffer of bicarbonate anion (HCO3) and carbonic acid (H2CO3) to keep the blood's pH between 7.35 and 7.45. Blood pH values higher or lower than 7.8 or 6.8 can be fatal.

Bicarbonate anion and hydronium are in equilibrium with carbonic acid in this buffer. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer.

To know more about acid visit:-

brainly.com/question/28175742

#SPJ1

Answer:

CH3NH2 and CH3NH3Cl

Explanation:

Methylamine (CH3NH2) is an organic base. In order to produce a basic buffer solution similar to blood, we can combine this base with a soluble salt of its conjugate acid, such as CH3NH3Cl. The solution of KOH and H2O would not be a good buffer because KOH is a strong base. The solution of HF and NaF is a buffer, but the pKa of HF is about 3.2, which is far from the pH of blood, 7.4.

Answer:

Take 1600grams divide by 2

It's a negative value for ∆H°, indicating that the conversion of diamond to graphite releases energy. As a result, it is an exothermic reaction.

The conversion of diamond into graphite is exothermic. The enthalpy change of the reaction is -267.1 kJ.There are three reactions that take place in this process. Cdiamond (s) + O2 (g) → CO2(g) ∆H° = -395.4 kJ2 CO2 (g) → 2 CO(g)+O2 (g) ∆H° = 566.0 kJ2 CO2(g) → Cgraphite(s) + CO2 (g) ∆H° =-172.5 kJCdiamond (s) → Cgraphite (s) ∆H°= ?

The conversion of diamond to graphite is an endothermic process. It has a positive value of ∆H°. Therefore, the heat is absorbed by the surroundings. According to the first two reactions, the formation of CO and CO2 from the combustion of diamonds produces energy.

The net reaction for the conversion of diamond to graphite takes place as follows:

Diamond (s) + 2 O2(g) → Cgraphite (s) + 2 CO2 (g)

The energy change for this reaction can be determined by combining the above three reactions. The enthalpy change is obtained by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The enthalpy change of the reaction is calculated as follows:

∆H°=ΣH°(products)−ΣH°(reactants)

∆H°=(−172.5)+(2×−393.5)+(566.0)−[(0)+(0)+(-395.4)+(2×0)]

∆H°=−267.1 kJ

To learn more about Exothermic reaction :

https://brainly.com/question/2924714

#SPJ11

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

Answer:

The chemical formula of aluminum sulfate is Al2(SO4)3.

The formula shows that there are 3 atoms of oxygen (O) in each molecule of Al2(SO4)3.

Number of molecules of Al2(SO4)3 = 3.5×1024

Number of O atoms in 1 molecule of Al2(SO4)3 = 3

Number of O atoms in 3.5×1024 molecules of Al2(SO4)3 = (3.5×1024) x 3

= 1.05×1025

Therefore, there are 1.05×1025 moles of O atoms in 3.5×1024 molecules of Al2(SO4)3.

Answer:

50.00 cm³

Explanation:

Relevant formula:

n = V × c

n = number of moles (mol)

V = volume (dm³)

c = concentration (mol/dm³)

1. Work out moles of KOH

V = 50cm³ = 0.05dm³

Note: remember to convert to the right units (1 dm³ = 1000cm³)

c = 0.2

n = 0.05 × 0.2

n = 0.01

2. Use balanced reaction equation to find the moles of H2SO4

c = 0.1

H2SO4 + 2KOH --> K2SO4 + 2H2O

Ratio of KOH to H2SO4:

2 : 1 (--> 1 is ½ of 2)

If we have 0.01 moles of KOH therefore:

0.01 : x

x = 0.005 (i.e. ½ of 0.01)

3. Calculate volume of H2SO4

n = V × c

0.005 = V × 0.1

V = 0.005 ÷ 0.1

V = 0.05

This reaction will take 0.05 dm³ of H2SO4, or 50 cm³

The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.

Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.

Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.

The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .

Thus, the cis to the hydroxyl (OH)  is (B) 2 and 3.

For more such questions on Cis-trans , Visit:

https://brainly.com/question/13557044

#SPJ11