Answer:
True
Explanation:
Competition limits population size. Imagine 7 animals fighting over 2 meals. This creates competition and some will not be fed.
Bacteria are usually classified by
Answer: Bacteria are classified into 5 groups according to their basic shapes: spherical (cocci), rod (bacilli), spiral (spirilla), comma (vibrios) or corkscrew (spirochaetes). They can exist as single cells, in pairs, chains or clusters. Artwork of bacterial cells becoming resistant to antibiotics.
Explanation:
Predict the most likely outcome of culturing transformed E. coli in the presence of tetracycline.Justify your prediction.
Answer:
E.coli is a bacterium which is preffered for transformation due to its rapid growth and high efficiency of introduction of DNA molecules into cells.
Tetracycline is an antibiotic used to treat several infections such as cholera, plague, brucellosis, and malaria etcetra.
Plasmid is a small, extrachromosomal DNA molecule present in cell which is seprated from chromosomal DNA and have ability to replicate independently.
When a plasmid resistant to tetracycline and kanamycine is inserted into E.coli, the process is called transformation. E.coli might not be able to survive due to absence of plasmid but the transformed strains having antibiotic tetracycline and kanamycine will probably be able to survive it.
Hence, the culture of bacteria carrying plasmid will be able to survive only.
Maximum transformation to tetracycline achieved when cells were harvested from L broth at 5.0-6.0 cfu/ml , followed by washing twice in cold.
The susceptibility of E.coli strain to culturing transformation by plasmid DNA was examined and optimized.
TransformationCells grown within the presence of D - cycloserine ( Cyc ) rather than Neg Gram (N x) transformed better. The presence of 5 mm Mg2+ ions in washing and CaCl2 solutions stimulated transformation about 2-fold.
Optimal conditions for transformation included a pH range of seven. 25-7.75 and a cell-to-DNA ratio of about 1.6 . 10(8) cfu/ng plasmid DNA.
The frequency of transformation was highest when cells were exposed to 100 mM CaCl2 in 250 mm.
Composition[tex]\rm KCl + 5 mM \;MgCl2 + 5 mM \;Tris[/tex]
pH 7.6, before mixing with DNA
Therefore, the results of culturing transformed E.coli within the presence of tetracycline is justified.
To know more about the Culturing transformation of E.coli follow the link
https://brainly.com/question/9038055
Which of the following is an example of stored energy? Select all that apply. *
A.a gallon of gasoline
B.water flowing downhill
C.a car battery
D.a lake at the top of a hill
E.a spinning top
Answer:
C
Explanation:
A heterozygous Tall plant is crossed with a heterozygous Tall plant
What percent of the offspring will be heterozygous?
Select one:
A. 100%
B. 50%
C. 25%
D. 75%
Answer:c
Explanation:sorry if this wrong don’t trust me!
Why is water considered to be abiotic?
Answer: Water is a nonliving factor so it is considered abiotic. Abiotic is any nonliving factor of the ecosystem, With said that water is not living so it is considered abiotic. Hope this helps.
Marijuana is a(n)
a. depressant
b. stimulant
c. hallucinogen
d. opiate
Answer:
Marijuana is a stimulant.
Answer: Marijuana is a stimulant.
Which type of organism developed first?
A. Chordates
B. Vertebrates
C. Deuterostomes
D. Sponges
Answer: D sponges, i just got this wrong lol
Explanation:
Why sponges develop first?
Sponges belong to the oldest and most simple animals that had evolved, and their discovery in such old rocks meant that they may have been the first animals.
How did sponges evolve?
Among extant animals, only sponges could have evolved directly from protozoa without changing feeding mode.
Learn more about here : brainly.com/question/22673336
#SPJ2
Which statements about mutations are true? Check all that apply.
A. Mutations cannot be passed from generation to generation.
B. Mutations are rare.
C. Mutations are always harmful.
D. Germline mutations occur in body cells.
E. Most forms of cancer are caused by somatic mutations.
Answer:
most forms of cancer are caused by somatic mutations
Explanation:
Answer:
B & E
Explanation:
Just did it and got it right
How to use punnet squares to caclulate ratios?
what is the best definiton of genetically motified foods? HURRYYY!!! please and thank youuuu
Answer:
GMO, or genetically modified foods, are foods that are messed with genetically by science to better benefit the human race. For example, scientists might replace genes that give corn a lower harvest, with a different gene in corn that makes a higher amount of harvest.
Explanation:
You could also look it up. Just search "GMO".
Describe a few ways in which an individual person can help protect biodiversity.
Answer:
An individual person can help protect biodiversity in multiple ways.
This person can educate themselves on biology and learn exactly what the problem is.This person can educate others once learning about it himself.This person can advocate for the environment.This person can cut down on their waste, lessening the amount of trash going into the environment.This person can be aware of what he buys and how it affects biodiversity.Explanation:
I don't know if this was the answer you're looking for, but I hope it's a start!
Identify the type of energy described in each sentence.
gravitational energy
mechanical energy
chemical energy
electrical energy
thermal energy
nuclear energy
radiant energy
The body stores lipids ingested as fat and uses this energy when needed.
A person’s hat falls off and lands on the ground.
A wave of water pushes a surfer to shore.
A burner on a stove heats up a tea kettle.
A power plant splits atoms to generate power for a city.
A nerve sends an impulse to another nerve.
A plant absorbs the Sun’s rays to start the process of photosynthesis.
Answer:
chemical energy: The body stores lipids ingested as fat and uses this energy when needed.
gravitational energy: A person’s hat falls off and lands on the ground.
mechanical energy: A wave of water pushes a surfer to shore.
thermal energy: A burner on a stove heats up a tea kettle.
nuclear energy: A power plant splits atoms to generate power for a city.
electrical energy: A nerve sends an impulse to another nerve.
radiant energy: A plant absorbs the Sun’s rays to start the process of photosynthesis.
Explanation:
what is the role of a cytoplasm
Answer:
Cytoplasm is responsible for giving a cell its shape. It helps to fill out the cell and keeps organelles in their place
Explanation:
Cytoplasm contains molecules such as enzymes which are responsible for breaking down waste and also aid in metabolic activity.
what was the purpose of the field study? keys and kingdoms worksheet
Answer:
A field study is a general method for collecting data about users, user needs, and product requirements that involves observation and interviewing. Data are collected about task flows, inefficiencies, and the organizational and physical environments of users.
Answer:
is it correct or not?
Explanation:
what do you think would happen if the AV node could no longer do it’s job? Explain how this would affect the contraction of the heart and movement of blood
Answer:who else is high rn
Explanation:
ifjoeisnbokfnkf
How is an ecosystem similar to the biosphere?
They both have something to do with organisms
With more carbon in the atmosphere, what do you think will happen to the environment
Answer:
Global warming
Extra carbon dioxide in the atmosphere will increases the greenhouse effect. More thermal energy is trapped by the atmosphere, causing the planet to become warmer than it would be naturally. That increases the Earth's temperature which is also called Global Warming
Describe how the carbon cycle transfers matter between organisms and their environment. Include three examples. For each example identify which of Earth's spheres (hydrosphere, geosphere, atmosphere, and biosphere) are involved in the exchange of carbon.
Answer:
somewhat answered, sorry it has been a bit
Explanation:
plants take in co2-->plant gets eaten-->animal dies, co2 moves to soil, some become fossil fuels
breathing puts co2 in the atmosphere, when fossil fuels are burned they are put into the atmosphere
co2 from the atmosphere dissolves in the surface of the ocean, photosynthesis
2 Points
Which best describes the blood flowing in a vein?
O A. It moves toward the heart.
B. It contains no red blood cells.
O C. It is oxygen rich.
D. It contains no white blood cells.
A gene mutation is when chemical changes occur in DNA of individual cells. True or False
Answer:True
Explanation:
Answer:
true
Explanation:
Use the Harris-Benedict equation to estimate your calorie needs. Show your calculations to explain how you arrived at your answer.
Answer:
[tex]BMR_{women} = 1401.75[/tex]
Explanation:
According to Harris-Benedict equation the Basal metabolic rate of an organism can be calculated by using the following formula for both men and women -
[tex]BMR_{men} = 10 * W + 6.25 * H - ( 5 * A) + 5[/tex]
[tex]BMR_{women} = 10 * W + 6.25 * H - ( 5 * A) - 161[/tex]
Here, W is the weight in Kgs
H is the height in Cms
and A is the age in years
My weight is equal to [tex]65[/tex] Kgs
My height is equal to [tex]167.64[/tex] cms or [tex]5.5[/tex] feet
Gender - female and
Age is [tex]27[/tex] years
Substituting the given values in above equation, we get
[tex]BMR_{women} = 10 * 65 + 6.25 * 167.64 - ( 5 * 27) - 161\\[/tex]
[tex]BMR_{women} = 1401.75[/tex]
Sample Answer:
Brian is a 15-year-old boy who weighs 130 pounds and is 68 inches tall. He engages in moderate exercise.
Convert weight and height to the metric system.
Weight: 130 lbs. = 130 × 0.45 = 58.5 kg
Height: 68 in. = 68 × 2.54 = 172.72 cm
Calculate BMR.
For men, BMR = (10 × weight in kg) + (6.25 × height in cm) − (5 × age in years) + 5 BMR = (10 × 58.5) + (6.25 × 172.72) − (5 × 15) + 5 = 1594.5 calories
Calculate daily calorie needs.
For moderate exercise, daily calories needed = BMR × 1.55 = 1594.5 × 1.55 = 2,471.475 calories
How does a DNA sequence determine a trait
Answer:The sequence of nucleotides in DNA genes determines the order of amino acids in a protein. This is the direct connection between your genes and your traits. ... Then cellular structures, the ribosomes, translate the RNA into proteins.
Explanation:
The instructions for making all the proteins are carried by the DNA, these proteins determine one's traits.
What is the importance of DNA sequence?The genetic code determines the proteins manufactured by the cell. The proteins refers to the strands of amino acids. The DNA sequence of the genes determines the order of amino acids in a protein. This is the direct association between the traits and the genes.
It is the DNA, which carries all the instructions for the manufacturing of the proteins, these proteins determine the traits. DNA does not possess the tendency to leave the nucleus, thus mRNA copies the message of DNA and carries it to a ribosome. The mRNA is read by the tRNA that brings in the appropriate amino acid to produce the protein. This protein determine a trait.
Thus, DNA sequence determine a trait, as they provide instructions for the manufacturing of the proteins, these proteins further determine a trait.
Find out more information about the importance of DNA sequence here:
https://brainly.com/question/12004133
Where is dna found
1. Molecules
2. Elements
3.cells
Answer:
3
Explanation:
Answer:
the dna is found in the cell nucleus
Explanation:
Your teacher places the following supplies on a table: water, hot plate, salt, beakers, food coloring, and test tubes. Using the supplies listed, how could you plan an investigation of how differences in temperature and salinity affect ocean currents? Include the following vocabulary in your explanation: salinity, density, temperature, wind, surface currents, deep currents. Make sure to include specific details and steps.
Answer:
Higher saline water is more dense that lower saline water
Explanation:
The ocean salinity varies with rainfall, run off from estuaries and the pattern of ocean current. In addition to this, higher temperature affects the kinetic movement of water as well as the salinity. The movement of the wind also contributes to the movement of water and the particles and solute distribution. The surface currents do not do much to mix the entire body of water and this is because this is from less dense areas. Deep currents factor in to mix just the heavier more dense layers.
In planning an experiment to test this one would do two experiments.
First: Heat 4 batches of water at different temperatures and color the different temperatures with different food coloring. Next layer the water carefully from hottest to coldest in a beaker and then from coldest to hottest in another beaker.
Second: Dissolve salt in 4 batches of water increasing the amount by half each time. Color each with different food colouring and layer the salty water from least salt to most salt in a beaker. Layer the water from most salt to least salt in another beaker.
Make observations:
The cooler water should be more dense and sink to the bottom while the saltier water should be more dense and sink to the bottom.
The changing of the rivers created more ____________ for animals
aRegeneration
bVegetation
c Erosion
d Habitats
Answer:
D) Habitats for animals.
Explanation:
It depends what the question means when it says 'the changing of the rivers'. I took it as the rivers are changing size and becoming more spread out. In that case, I chose habitats.
The more water there is, the more habitat there is for sea life.
All in all, the correct answer is D).
so....... how are u?
Answer:
Good, I guess. I just feel dead.
Explanation:
I am just bored with this quarantine, duh!
Easy 50 Points
21. ____________ igneous rocks solidify beneath the surface.
22. ____________ cooling allows time for large crystals to form.
23. Sediments are laid down, or __________, before they can be formed into sedimentary rocks.
24. Fluids that crystallize in the spaces between the loose particles of sediments create rock by ____________.
25. __________ metamorphism changes enormous quantities of rock over a wide area.
26. ____________ metamorphism changes a rock that is in contact with magma because of the extreme heat.
27. In a metamorphic, minerals separate by __________ into lighter and darker bands.
28. The rocks that form from an erupting volcano are __________ __________ rocks.
29. Cemented sediments become ___________ sedimentary rocks.
30. ___________ occurs when sediments are squeezed together by the weight of overlying sediments on top of them.
Answer:
21. Intrusive igneous rocks solidify beneath the surface.
22. Slow cooling allows time for large crystals to form.
23. Sediments are laid down, or Compacted, before they can be formed into sedimentary rocks.
24. Fluids that crystallize in the spaces between the loose particles of sediments create rock by Cementation.
25. Regional metamorphism changes enormous quantities of rock over a wide area.
26. Contact metamorphism changes a rock that is in contact with magma because of the extreme heat.
27. In a metamorphic, minerals separate by Bedding into lighter and darker bands.
28. The rocks that form from an erupting volcano are Extrusive Igneous rocks.
29. Cemented sediments become Clastic sedimentary rocks.
30. Lithification occurs when sediments are squeezed together by the weight of overlying sediments on top of them.
The correct blanks are Intrusive, Slow, deposited, cementation, Regional, Contact, Foliation, volcanic, igneous, lithified, and Compaction.
Igneous rocks are a type of rock that forms from the solidification and crystallization of molten material, known as magma or lava.
Intrusive igneous rocks, also known as plutonic rocks, form when molten magma cools and solidifies beneath the Earth's surface.When molten magma or lava cools slowly, it provides sufficient time for the atoms and molecules within the molten material to arrange themselves in an orderly manner. The process of deposition refers to the settling or accumulation of sediments, which are fragments of rocks, minerals, organic matter, or other particles, onto a surface.Cementation is a process in which minerals in fluid form, often dissolved in groundwater, precipitate and crystallize within the pore spaces of sedimentary materials. During regional metamorphism, large volumes of rock are subjected to significant heat and pressure, typically deep within the Earth's crust. Contact metamorphism, also known as thermal metamorphism, occurs when a rock comes into direct contact with magma or an igneous intrusion.Foliation refers to the parallel alignment of minerals or the development of compositional layering within a metamorphic rock. Volcanic igneous rocks are classified as extrusive igneous rocks because they are formed from lava that has extruded onto the surface.The process of lithification involves the transformation of loose sediments into solid sedimentary rocks.Compaction is a key process in the lithification of sedimentary rocks. It takes place as layers of sediment accumulate over time, and the weight of the overlying sediments exerts pressure on the underlying layers.Thus, the correct blanks are Intrusive, Slow, deposited, cementation, Regional, Contact, Foliation, volcanic igneous, lithified, and Compaction.
To know more about Metamorphism, click here:
https://brainly.com/question/33610840
#SPJ2
Explain how your model demonstrated energy transformation from thermal energy to mechanical energy during a volcanic eruption.
(I mixed warm water, vinegar, and baking soda)
Answer:
Well to begin with, the thermal energy is mostly provided by the energy contained in warm water, when mixed with the other two components the chemical units are modified to form a composite solution that will result in an energy release, this energy release generate a movement, which in this case is the eruptive movement simulating the eruption of a volcano.
Explanation:
By mixing the vinegar (which is an acid) with the baking soda (which is a base), they react and transform into water, sodium acetate (a salt), and carbon dioxide (a gas). Carbon dioxide (CO2) is the gas that causes bubbles to form from the eruption of the volcano and balloons to swell.
Each spring when the worms reproduce, they have about 500 babies BUT only 100 of these 500 ever become old enough to reproduce. Question: What are the worms using to try to get as many of their offspring to survive? *
Answer:
If the environmental condition are suitable, the worms reproduce rapidly.
Explanation:
Environmental condition such as temperature, humidity, pH and texture of the soil has a great influence on the population of worms. If these environmental conditions are optimum, the worms reproduce rapidly and increase in population occurs. The population of worm increases because more worms start reproduction and reproduce baby worms. With the passage of time, these baby worms fully matured and start reproduction and increase the population of worms.
Answer: The keep themselves away from predation
Explanation:
The worms are mostly kept away from predators to make them survive. Some worms can be nocturnal while some are diurnal the nocturnal worm are inactive during the day keeping them away from predator but diurnal worms moves around during the day and it exposes them to predation they are been lost. The population the are survived to adult are the ones that have selective advantage of not being destroyed or feed on by preys. The Nocturnal are able to survive over a long time
How is the epithelium suited for the substances ?
Answer:
Epithelial tissue is composed of cells laid together in sheets with the cells tightly connected to one another. Epithelial layers are avascular, but innervated.
Epithelial cells have two surfaces that differ in both structure and function.
The epithelial cells are nourished by substances diffusing from blood vessels in the underlying connective tissue. One side of the epithelial cell is oriented towards the surface of the tissue, body cavity, or external environment and the other surface is joined to a basement membrane. The basement layer is non-cellular in nature and helps to cement the epithelial tissue to the underlying structures.
