The classification for the following half-reactions is:
"N": HCI → MgCl₂"O": Mg → MgCl₂ + 2 e⁻"R": 2 HCI + 2 e⁻ → H₂What is an oxidation-reduction reaction?An oxidation-reduction reaction is any chemical reaction in which the oxidation number of a molecule, atom, or ion changes by gaining or losing electrons.
What are the half-reactions?There are 2 kinds of half-reactions.
Oxidation: An species loses electrons and its oxidation number increases.Reduction: An species gains electrons and its oxidation number decreases.Let's classify the following half-reactions.
HCI → MgCl₂Electrons are not exchanged and Cl, the element present on both sides, has the same oxidation number, -1. This is neither oxidation nor reduction.
Mg → MgCl₂ + 2 e⁻Mg loses 2 electrons and its oxidation number increases from 0 to +2. This is an oxidation half-reaction.
2 HCI + 2 e⁻ → H₂H gains 2 electrons and its oxidation number decreases from +1 to 0. This is a reduction half-reaction.
The classification for the following half-reactions is:
"N": HCI → MgCl₂"O": Mg → MgCl₂ + 2 e⁻"R": 2 HCI + 2 e⁻ → H₂The question is incomplete. I believe the complete question is as follows.
Use this oxidation-reduction reaction to answer questions about half-reactions:
Mg + 2 HCl → MgCl₂ + H₂
Classify these half-reactions by typing in "O" for "oxidation half-reaction," "R" for "reduction half-reaction," and "N" for "neither."
HCI → MgCl₂
Mg → MgCl₂ + 2 e⁻
2 HCI + 2 e⁻ → H₂
Learn more about redox reactions here: https://brainly.com/question/1161855
Answer:
For those who need it, the answers are N, O, R
Explanation:
Convert 21 grams of radon into atoms of radon.
Answer:
The atomic mass of radon is 222.
Explanation:
. That means that one mole of radon weighs 222 grams (222 grams/moles). We can therefore make the following equation:
Grams × (1/222) = Moles of Radon
which best describes how heat energy moves within the system?
Answer: B
Heat always travels from warmer areas to cooler areas in the form of radiation or convection currents due to the temperature difference. You could kind of think of this movement like diffusion: travelling from a higher concentration to a lower one (if you take biology). This is how a gas heats up a pan on the stove or a radiator warms a room
How many peaks will you observe in the 13C spectrum of cyclohexane ?
1 1 - incorrect
3
6
3 peaks
Explanation:
You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.
giving brainly for correct answer! :)
Answer:
Mass is the amount of matter in an object
Answer:
Mass
Explanation:
matter is weighed by the mass of an object
An initial solution of orange juice has a solute concentration of 0.50 M and a volume of 155.0 mL. What is the final solute concentration of the juice after its been diluted with 52.5mL of water?
Answer:
0.37 M
Explanation:
An initial solution of orange juice has a solute concentration of 0.50 M and a volume of 155.0 mL. What is the final solute concentration of the juice after its been diluted with 52.5mL of water?
the old molarity was 0.50 M, and a volume of 1555.0 ml
the new volume is a total of 155.0 ml + 52.5 ml =207.5 ml
so the new molarity is (155.0/207.5) X 0.50 M = 0.37 M
what is a nucleus and what are the functions?
U ever get an answer
nkkljihghjhytuyftghvnvm
jkhjkhjkh
Answer:
seriously ....,........
I don't like chemistry
Use the choose reaction drop down menu to see other equations, and balance them. Check your answers and then write the balanced equations. AI+ HCI-> AICI3+ H2
NaCI -> Na + CI2
Na2S + HCI -> NaCI + H2S
In order to complete a reaction, a chemist needs to react 4 moles of aluminum atoms with 3 moles of oxygen molecules. How many grams of aluminum would be required to make this happen?
Answer:
4 Al + 3 O2 → 2 Al2O3
To react with 4 moles of Al, (3×32) g oxygen is required.
So, to react with 2.4 moles of Al, {(3×32)/4} × 2.4 = 57.6 g oxygen is required.
Hope this helps.
convert 3.49g/cm³ to kg/m³
1 g/cm3 to kg/m3 = 1000 kg/m3
3.49 g/cm³= 3.49 x 1000
= 3490 kg/m³
Ans: 3490 kg/m³
Given: 800 mL of 2.5 M NaCl. Find grams of NaCl needed
Answer:
Answer: molar mass of NaCl is 58.5 gm/mol. This refers to the fact that 1 mole of NaCl weighs 58.5 gram.
Explanation:
Please help me ASAP I couldnt copy paste the table so I added a screenshot Please I really need help!!!
Answer:
2.04 Thermal Energy and Chemical Change Lab Report
Explanation:
Lattice energy is_______________ proportional to the distance between two ions in an ionic compound; therefore, the compound with the smaller lattice energy will have the _________________ distance between the ions.
Lattice energy is inversely proportional to the distance between two ions in an ionic compound; therefore, the compound with the smaller lattice energy will have the larger distance between the ions.
Discussion;
The lattice energy of an ionic compound is a measure of the strength of the bond in the compound.The lattice energy is Inversely proportional to the distance of the atoms apart.Read more:
https://brainly.com/question/24228788
When performing an experiment, the following footwear is best
Answer:
sneakers
Explanation:
Answer:
closed toe shoe
Explanation:
becusae if a cemcal spills it cant hurt your feet
The formation of aluminum chloride can be described by the balanced chemical equation. 2Al+3Cl2⟶2AlCl3 How many moles of Cl2 molecules are required to react with 3.90 mol Al atoms? moles of Cl2 required
The city council of a small town wanted to add fluoride to their water so that all the residents would have healthier teeth. The mayor had read that ionic compounds must be used to get the fluoride into water. He looked up fluorine-containing compounds and came up with the following list.
NaF NF3 SiF4 CaF2 NH4F
Using academic vocabulary in paragraph form, discuss the following:
Explain which compound(s) could produce fluoride ions in the water. In your response, be sure to include:
° which of the listed compounds are ionic and which are covalent.
° how ionic and covalent compounds are different.
° why only ionic compounds would produce fluoride in water.
Answer:NaF is ionic. NF3 is covalent. SiF4 is ionic. CaF2 is Ionic and NH4F is also ionic. Ionic compounds transfer electrons whereas covalent compounds share electrons hence the word "co". Also, ionic compounds are formed with metal and nonmetal. Where a covalent is with 2 nonmetals. Only ionic compounds would produce fluoride in water because ionic compounds can dissolve in water and covalent compounds cant.
The compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].
The ionic compounds are formed by the transfer of electrons between the atoms of the compounds. The ionic bonds are weaker and are easy to dissociate in the aqueous solution.
The covalent compounds are formed by the sharing of electrons between the atoms. Since there is sharing, there has been a strong bond, that has been hard to dissociate.
The Mayor has to release Fluoride in the water, thus ionic compounds are preferred that have the easy release of fluorine.
From the given compounds:
NaF = Ionic compound[tex]\rm NF_3[/tex] = Covalent compound[tex]\rm SiF_4[/tex] = Ionic compound[tex]\rm CaF_2[/tex] = Ionic compound[tex]\rm NH_4F[/tex] = Ionic compoundThus the compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].
For more information about ionic and covalent compounds, refer to the link:
https://brainly.com/question/10748806
What is the initial concentration of a solution if 40.0 mL is diluted to make 720 mL of a 0.45 M solution?
Answer:
8.1 M
Explanation:
What is the initial concentration of a solution if 40.0 mL is diluted to make 720 mL of a 0.45 M solution?
LET Y = INITIAL CONCENTRATION
SO
Y TIMES 40/720 = 0.45 m
SO
Y= (0.45) X 720/40=
0.45 X 72/4 =
0.45 X 18 =8.1 M
Concentration is related to the mass and volume. 8.1 M initial concentration of a solution is required if 40 ml is diluted to make 720 ml of a 0.45 M solution.
What is initial concentration ?The first measured concentration of a compound in a substance is called as initial concentration. Initial concentration also measure with the help of molarity.
Write out the equation C = m ÷ V, where m is the mass of the solute and V is the total volume of the solution. Substitute the values you found for the mass and volume, and divide them to find the concentration of your solution.
Let X is the initial concentration,
so, X times 40 ÷ 720 = 0.45
X = ( 0.45 ) × ( 720÷40)
= 0.45 × 18
= 8.1 M
Hence, 8.1 M initial concentration of a solution is required .
To learn more about initial concentration follow the link below;
https://brainly.com/question/23546015
#SPJ2
How many molecules of aspartame are present in 1.00 mg of aspartame?
Answer:
0.2 x 10^19
Explanation:
pls help i am in 8th grade k12
Answer:
zzxdczxc V
Explanation:
An exothermic reaction releases 86.5 kJ. How many kilocalories of
energy are released?
Which of the following is a compound? *
A. aluminum
B. carbon
C. oxygen
D. sugar
Answer:
C. OXYGEN
Explanation:
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).
2Mg + 0 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
Answer:
x=403/24,3 = 16.58 gm MgO
EXPLANATION
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO)
2Mg + 0 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
Oxygen exist in nature as O2, diatomic.
so
The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).
2Mg + 02 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.
2 moles of Mg produce 2 moles of MgO
1 mole of Mg weighs 24.3 and produces 1 mole of MgO
Mg HAS AN ATOMIC MASS OF 24.3
Mg HAS A MOLAR MASS OF 24.3 +16 = 40.3gm/mole
so 24.3 gm of Mg produce 40.3 gm MgO
set up the ratio
10 gm Mg/x of MgO = 24.3/40.3
or
10/x = 24.3/40.3
cross multiply and isolate x (use Algebra I)
24.3x =403
x=403/24,3 = 16.58 gm MgO
if 10.5 grams of liquid water is boiled how many grams of water vapor will then form ?
Answer:
It depends
Explanation:
This could vary depending on the exact temp, time and minerals. something with alot of salt boils quicker than something without it, so 10.5 grams?
The particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.
What are minerals?Minerals are defined as a naturally crystallized element or chemical compound that was created through geological processes. Natural materials are those that form on their own, such as minerals. Minerals don't droop, melt, or evaporate since they are solids. In contrast to the carbon compounds found in living organisms, minerals are inorganic. Minerals are crystalline: They have a unique atomic composition and arrangement.
Temperature is defined as a measure of hotness or coldness expressed in terms of any number of arbitrary scales that shows the direction that heat energy will naturally flow, i.e., from a hotter body to a colder body. The three temperature scales that are now in use are Kelvin, Celsius, and Fahrenheit. Food, beverages, agriculture, and medical care for both people and animals all depend heavily on temperature.
Thus, the particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.
To learn more about minerals, refer to the link below:
https://brainly.com/question/18078524
#SPJ2
Select all the correct answers.
To formulate hypotheses and construct theories, astronomers analyze data. This analysis helps them find trends that may exist. Which two statements does the data in this table support? If you’re not sure, take a guess.
A. The farther a planet is from the Sun, the longer its orbital period is.
B. Planets with a greater diameter have longer days.
C. The closer a planet is to the Sun, the greater its axial tilt is.
D. Planets with greater mass tend to have more moons.
Answer: A. The farther a planet is from the Sun, the longer its orbital period is, and D. Planets with greater mass tend to have more moons.
Explanation: trust
When the pressure of a sample of gas is measured in a closed-end manometer, the mercury liquid is measured at a height of 31.6 cm. What is the pressure of the gas, in Pa
The answer is 42,100.
Sắp xếp 4 axit sau theo thứ tự tính axit tăng dần:
CH3-CH2-CH2-COOH (1), CH3-CH2-CHCl-COOH (2)
CH3-CHCl-CH2-COOH (3), CH2Cl-CH2-CH2-COOH (4
A \pu{1.60 g}1.60 g1, point, 60, space, g calcium supplement contains 37.8\%37.8%37, point, 8, percent \ce{Ca}CaC, a by mass. The calcium is present in the supplement as \ce{CaCO3}(s)CaCOX 3 (s) (molar mass \pu{100.09 g/mol}100.09 g/mol100, point, 09, space, g, slash, m, o, l). How many grams of \ce{CaCO3}(s)CaCOX 3 (s) are in the calcium supplement?
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
We want to calculate the mass of CaCO₃ in a 1.60 g supplement. We need to consider the following relationships.
The mass percent of Ca is 37.8%, that is, there are 37.8 g of Ca every 100 g of supplement.The molar mass of Ca is 40.08 g/mol.The molar ratio of Ca to CaCO₃ is 1:1.The molar mass of CaCO₃ is 100.09 g/mol.[tex]1.60gSup \times \frac{37.8gCa}{100gSup} \times \frac{1molCa}{40.08gCa} \times \frac{1molCaCO_3}{1molCa} \times \frac{100.09gCaCO_3}{1molCaCO_3} = 1.51gCaCO_3[/tex]
A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.
Learn more: https://brainly.com/question/14990953
A 1.60 g calcium supplement contains 37.8% Ca by mass. The calcium is present in the supplement as CaCO₃(s) (molar mass 100.09 g/mol). How many grams of CaCO₃(s) are in the calcium supplement?
Calculate the number of moles in 400g of Tio2
Answer:
5.01 moles
Explanation:
Calculate the number of moles in 400g of Tio2
first, write the formulas correctly
Calculate the number of moles in 400g of TiO2
capitalize the first letter of your elements
the molar mass of TiO2 is
47.88 +2X16.00 =47.88 +32.00 = 79.88 gm/mole
(to 3 sig fig = 79.9 gm/mole
400 gm/79.9 gm/mole = 400/79.9 mole gm/gm =
400/79.9 moles = 5.01 moles
What is the mole ratio between FeCl3 and Fe(C5H7O3)3 ?
Answer: 162.2 g FeCl3. mL of soln = 0.07028 mol FeCl3x ... mol FeCl3 = mol Fe(OH)3 = 0.01291 mol ... (a) MaVa = MbVb since HCl and KOH react in a 1:1 molar ratio.
Explanation:
