Answer:
Stream Ecosystem
Answer:
the answer is Steam
Explanation:
I took the test
[FW.04H]A single computer microchip uses 10 gallons of water during its manufacture. A group of people suggested that the use of computers should be reduced to help conserve water. Which of these is the best alternative method to conserve water in manufacturing microchips?
Reduce the size of microchips.
Use graywater to manufacture microchips.
Collect rainwater and use it to make microchips.
Research ways to reduce water waste in making microchips.
Answer:
Option D, Research ways to reduce water waste in making microchips
Explanation:
The best way to conserve any natural resource is to conserve it at the source point and further make it apt for re use.
If the water waste is microchips is reduced then gallons of water will be saved. Also, devising engineering mechanism to reuse water in chip manufacturing industry will further reduce the water waste.
Hence, option D is correct
14. a science student claims that a substitution mutation is less likely to affect gene function than an insertion or deletion mutation. use logical reasoning and evaluate this claim.
Because insertions and deletions produce a frame-shift that modifies the interpretation of following codons, they are frequently more detrimental than substitutions that modify only one amino acid.
What is a mutation?A alteration in the DNA sequence of an organism is referred to as a mutation. Errors in the replication of DNA during the process of cell division, exposure to mutagens, or viral infections are all potential causes of mutations.
Base substitutions, deletions, and insertions are the three different kinds of DNA mutations that can occur.
Because an insertion or deletion results in a frame-shift that changes the reading of subsequent codons and, as a result, alters the entire amino acid sequence that follows the mutation, insertions and deletions are typically more harmful than substitutions, in which only one amino acid is changed. This is because frame-shifts change the reading of subsequent codons.
Learn more about mutation, here:
https://brainly.com/question/12698090
#SPJ5
In which layer of the cutaneous membranes are nerve ending located?
A. Fascia.
B. Subcutaneous.
C. Dermis.
D. Epidermis
Answer:
the answer is the dermis
Explanation:
The cutaneous membranes are nerve ending located in the Dermis hope this helps and i'm sorry if it's wrong.
Hii please help me...
In proteins, the initial blueprint for the amino acid order is determined by:
nitrogenous bases in RNA
there is no order in amino acids
nitrogenous bases in DNA
Answer:
In proteins, the initial blueprint for the amino acid order is determined by:
✓ nitrogenous bases in RNA
O there is no order in amino acids
O nitrogenous bases in DNA
Explanation:
Protein synthesis is the process in which cells make proteins. Translation occurs at the ribosome, which consists of rRNA and proteins. In translation, the instructions in mRNA are read, and tRNA brings the correct sequence of amino acids to the ribosome.
If right I’ll mark brainliest
Have the numbers of solid colored snails decreased significantly due to bird predation? Explain
your answer.
Answer:
Yes
Explanation:
birds pick out patterns because they are up in the air so the more brighter colored the snail the less of them there are
In science, theories____?
Answer:
have limited explanatory power
A study is being done to test the effects of temperature on the number of microbial colonies. Four different incubators are set up, each at a different temperature with one culture plate in each. Each plate has the same nutrient content, pH, and are inoculated with microorganism samples from the same source. At the end of the experiment, the number of colonies on each plate is counted. What is the independent variable
Answer:
The correct answer is - the different temperatures of incubators.
Explanation:
An independent variable is a variable in a study or research which is manipulated or changed to check or find the effect on the dependent variable. The independent variable is the only factor that changes in research while other factors remain constant that can affect the result in the study.
In this case or study, there is the only factor that is manipulated is the temperature of incubators is manipulated to see the effect of temperature on the number of microbial colonies. Thus, the different temperatures of incubators is the independent variable here.
What is the name of negatively charged particles ?
Answers:
electrons
Explanation:
Thomson discovered a negatively charged particle, called the electron. Rutherford proposed that these electrons orbit a positive nucleus. In subsequent experiments, he found that there is a smaller positively charged particle in the nucleus which is called a proton.Jun 5, 2019
in what ways can overpopulation be beneficial to differential reproductive success?
Answer:
Differential reproduction is called the one that occurs as a result of the differences between the individuals that make up a society or sample, where it is those with comparative advantages who manage to reproduce, while those who do not have said advantages tend to die out. It is, in short, a practical application of Charles Darwin's theory of natural selection.
Thus, if there is an overpopulation of a certain species, a series of effects will occur (such as the scarcity of resources, the lack of living space, etc.) that will tend to gradually decrease the population to return to an ideal number of individuals. In this aspect, differential reproduction will be applied, being able to reproduce those that have comparative advantages over the rest, which will inevitably become extinct.
Which was the earliest method used to determine stellar distances? A. supernovae B. parallax C. cepheids variables D. redshift measurement
Answer:
Parallax
Explanation:
Trust me I've done this
Answer:
parallax
Explanation:
Plato/Edmentum
Using the Gizmo, create four energy paths to explain how the toaster could get its energy.
Answer and Explanation:
Energy is well-defined as the capacity to do work. Heat is the kind of energy. It is transmitted from the high-temperature object to the low-temperature object. When electricity runs over a wire, energy is transferred from one end of the wire towards another end. Electricity flow in the wire by electrons. When electricity flows, the electrons collide with one another and give off heat due to collision. Less collision of electrons produce less heat, and more collision of electrons produce more heat. When the toaster wire plugged into the electricity supply, electric energy began to flow through the wire—the electric current run over a series of filaments. The filaments are thin and connected. When electric energy flows through the filaments, they glow red hot and transfer the bread. The filaments are present on both sides of the toaster. So the bread cook from both sides at a similar time.
What are the four levels of organization in living things? a. cell, multicellular, organ, organ system b. single cell, multicellular, tissue, organ c. larger size, longer life, specialized cells, organs d. cell, tissue, organ, organ system
Which of the following is TRUE about alleles? Which of the following is TRUE about alleles? The phenotype of the individual will always indicate with certainty the alleles of the individual. An individual will only carry one version of an allele. Alleles come in two forms, the good form and the bad form. Individuals carry both forms of each allele. An allele is a variant form of a gene.
Answer:
An allele is a variant form of a gene.
The phenotype of the individual will always indicate with certainty the alleles of the individual
Explanation:
An allele is the alternate form of a gene example is allele A, allele a
While writing the genotype of an individual the allele is always seen, it usually written in pairs example is AA , Aa, aa, SS
The phenotype of an individual will reveal the allele such person have example is an individual with the sickle cell having allele s through the appearance of such individual one could know if such person posses the allele.
The bullfrog and the Northern cricket frog both reside in eastern pine forests and use many of the
same limited resources. The relationship between these two amphibians is a form of -
O A predation
O B. competition
o c. parasitism
D.
gommensalism
Which substance most likely consists of atoms that are able to slide past one another?
ice
honey
wood
cotton
Answer:
Ice
Explanation:
some Atoms in ice allow it to slide, and water will stop the friction from accruing as strongly, if you will.
Which statement summarizes the relationship between DNA, proteins, and amino acids?
A. The DNA molecule is a protein formed by amino acids that are linked together by peptide bonds.
B. The type of protein that composes DNA codes for the twenty different amino acids.
C. The sequence of amino acids in DNA determines the type of protein formed during protein synthesis.
D. The sequence of nucleotides in DNA codes for specific amino acids which bond to form proteins.
Answer:b
Explanation:
The statement (B) is correct. The type of protein that composes DNA codes for the twenty different amino acids.
What are proteins?Proteins are large biomolecules and macromolecules that comprise one or more long chains of amino acid residues.
Moreover, proteins are large, complex molecules that play many critical roles in the body. They do most of the work in cells and are required for the structure, function, and regulation of the body's tissues and organs.
Therefore, a molecule made up of amino acids. Proteins are needed for the body to function properly. They are the basis of body structures, such as skin and hair, and of other substances such as enzymes, cytokines, and antibodies.
Learn more about proteins:
https://brainly.com/question/19596068
#SPJ2
which of th following processes releases carbon dioxide as waste
Answer:
Cellular respiration
Explanation:
Cellular respiration releases carbon dioxide and water as waste products.
Could solar energy applications be effective anywhere in the world? Why or why not?
Answer:
Solar panels can generate electricity just about anywhere on Earth, but some areas receive more sunlight than others, and as such, have a higher solar energy potential. The following map, prepared by Solargis, shows areas with the highest PV production potential.
PLEASE HELP!!!
• Humans have some...
A.) 7,000 cells
B.) I Million total cells
C.) 30-37 trillion cells
D.) 876 Quintillion cells
E.) we are not made of true cells
Answer:
C. 37.2 Trillion cells.
Explanation:
Which natural forces can create sediments
A Wind and ice
B Moving air,moving water,and moving ice
C Water and ice
D sunlight
Answer:
C - Water and iceHope it help❤️
composition of water yam
PLEASE ANSWER ASAP FOR BRAINLEST!!!!!!!!!!!!!!!!!!!!
Answer the HOT Question:
What do you think would happen to the skin if the dermis layer and the epidermis layer of the skin become separated?
To earn full credit
Restate the question
Define the epidermis
Define the dermis
Predict what you think will happen if they become separated*
What do you think would happen to the skin if the dermis layer and the epidermis layer of the skin become separated?
Answer
Explanation:
if the epidermis and the dermis say become separated you think will happen to your skin?
epidermis the surface AKA your skin.
dermis layer of tissues under your epidermis.
when the epidermis and the dermis are split and have a blister will come up in your skin.
what is a hypothesis
Answer:
a suggested sollution or a guess to an information given to you
which of these events is a likely result of chemical water pollution?
A. Sediment particles floating in water clog the gills of fish.
B. Fish die from lack of oxygen due to an algal bloom.
C. Rainbow trout disappear from a stream because of high water temperatures.
D. Algae are killed by solvents that have run off into a pond.
Fish die from lack of oxygen due to an algal bloom is a likely result of chemical water pollution. Therefore, option (B) is correct.
What is chemical water pollution?Chemical water pollution refers to the presence of harmful chemicals or substances in water bodies such as lakes, rivers, and oceans. These chemicals may come from various sources, including industrial processes, agriculture, and human activities. Common types of chemical pollutants in water include heavy metals, pesticides, oil spills, and toxic waste.
Chemical water pollution can have harmful effects on the environment and human health, including reduced water quality, contamination of aquatic life, and the spread of waterborne diseases. Preventative measures, such as proper waste disposal and treatment, are necessary to minimize chemical water pollution and protect water resources.
Learn more about water pollution, here:
https://brainly.com/question/16493617
#SPJ7
Using the Gizmo, determine how coal and petroleum (oil) are formed. Describe the steps required to form each fuel from atmospheric CO2.
Answer and Explanation:
Petroleum and coal are fossil fuels. The degradation of the earliest plants forms them. These dead plants started to pile up and form peat. Then the pressure and heat from various geological procedures convert peat into coal. Coal is a combustible rock which contains 50% carbon. Anthracite, Lignite and bituminous are the types of coal, and the formation of coal depends upon the quantity of hydrogen, oxygen and carbon. Petroleum exists naturally in liquid form and formed by decomposed organic matter. Fossil fuels can be refined into usable substances. Gasoline, tar, lubricants and many other products are obtained from petroleum. There are two steps, which required to form fuel from atmospheric carbon dioxide. In first step carbon dioxide is converted into carbon monoxide. In the second step, carbon monoxide combines with hydrogen to form hydrocarbon fuels. The formation of fuel is a natural process when animals respire carbon dioxide release in the atmosphere.
Which is a difference between active and passive transport?
A. Eukaryotes are capable of active transport, while prokaryotes are capable of passive transport.
B. Cells only carry out active transport when they need to move, while passive transport occurs constantly.
C. Active transport requires ATP, while passive transport does not.
D. Cells with mitochondria carry out active transport, while cells without mitochondria carry out passive transport.
The difference between active and passive transports is that active transport requires ATP while passive transport does not. the correct option would be C.
Active transports are the movement of materials in and out of the cell that requires the expedition of energy. The energy is usually in the form of Adenosine Triphosphate (ATP).
Active transport is unlike passive transport because the latter requires no energy. In other words, passive transports are spontaneous.
Active transport usually involves the movement of materials against their concentration gradients while passive transport is the complete opposite.
Examples of active transport include the sodium-potassium pump, movement of amino acids in the intestinal tracts of man, etc while examples of passive transport include simple diffusion of oxygen to the alveolar walls in the lung.
More on active transports can be found here: https://brainly.com/question/2503897
Manufacturers could reduce waste and conserve resources by making products that use less
are difficult to repair
use more materials
are more durable
are disposable
Answer:
are disposable.
Explanation:
Manufacturers could reduce waste and conserve resources by making products that are disposable.
This ultimately implies that, manufacturers of finished products that are being used by the consumers should endeavor to make them easily disposable without any adverse effect on the environment.
Which of the following activities were asked about when determining activity level?
a. stretching and flexibility.
b. specific exercises like running, swimming, and biking.
c. moderate household chores.
d. resistance (weight) training.
e. sedentary activities like watching TV and computer use.
f. moderate exercise that causes increased heart and breathing rate.
Answer:
b. and f.
Explanation:
The two main categories of activities that are asked about are specific exercises like running, swimming, and biking. As well as moderate exercise that causes increased heart and breathing rate. These are asked about because they are separate physical activities from an individual's everyday life whether it is done as a hobby or for health reasons. They tend to influence the physical status and are therefore important when determining activity level. Other tasks are usually not included since they are considered normal for survival as everyday tasks.
As per the observation, the correct answers about the determining activity level are options:
b. specific exercises like running, swimming, biking, and f. moderate exercise that causes increased heart and breathing rate.
The primary classes of sports which are requested approximately are unique sporting activities like running, swimming, and biking. As properly a slight workout that reasons expanded coronary heart and respiration rate.
These are requested approximately due to the fact they're separate bodily sports from an individual's regular lifestyles whether or not it's miles executed as an interest or for fitness reasons. They have a tendency to steer the bodily reputation and are consequently critical while figuring out pastime level. Other responsibilities are typically now no longer covered because they're taken into consideration every day for survival as regular responsibilities.
What is the activity level?There are three essential approaches to describing the depth of an activity – vigorous, moderate, and gentle.
Thus it is clear that the following activities were asked about when determining activity levels were b. specific exercises like running, swimming, and biking. f. moderate exercise that causes increased heart and breathing rate.
To learn more about activity levels refer to the link :
https://brainly.com/question/1673413
