Can someone please help me on this i’ve been doing this for an hour

Answer:

  10.309 in²/s

Step-by-step explanation:

Given A³ = 36πV² and V' = 18 in³/s, you want to know A' when A=153.24 in² and V=178.37 in³.

Using implicit differentiation, we have ...

  3A²·A' = 36π·2V·V'

  A' = (36π·2)/3·V/A²·V' = 24πV/A²·V'

  A' = 24π·(178.37 in²/(153.24 in²)²·18 in³/s

  A' ≈ 10.309 in²/s

The surface area is increasing at about 10.309 square inches per second.

__

Additional comment

There are at least a couple of ways a calculator can be used to find the rate of change. The first attachment shows evaluation of the expression we derived above. The second attachment shows the rate of change when the area is expressed as a function of the volume.

The result rounded to 5 significant figures is the same for both approaches.

Answer:

To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.

We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.

So we have:

556 = 16 x 34 + 48 + 4

This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.

Simplifying the remainder, we have:

48 + 4/16 = 48 + 1/4 = 48.25

Therefore, the quotient of 556 and 16 is:

556/16 = 34 1/4

The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.

When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.

Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.

Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.

There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.

https://brainly.com/question/18472914

#SPJ2

Using the property of a kite: the angles formed by two unequal sides of a kite are equal. The value of ∠BCD∠BCD is

∠BCD = ∠BAD ⇒ ∠BCD = 106°  

Answer: profit

Step-by-step explanation:

3.95 (price of one share) multiplied by 40 (the amount of shares bought) would have cost $158. so selling all for $200 would be a $42 profit

Answer:

36 × 10^6 m²

Step-by-step explanation:

Given the side length of a square = 6 × 10³m,

To solve for the area of a square, use the following formula:

A = S² where:

S = side of the square

Substitute the given value for the side into the formula:

A = S²

A = (6 × 10³)²

A = 36000000 or 36 × 10^6 m²

NOTE:

6 × 10³ is also the same as 6 × 1000 = 6000,

(6 × 10³)² is essentially 6,000² = 36,000,000

Therefore, its area in square meters is 36 × 10^6

the triangles are similar, corresponding parts of the triangles are equal in measure. Thus, it is reasonable to conclude that [tex]AB ≅ DE.[/tex]

It is reasonable to conclude that [tex]AB ≅ DE[/tex]because triangles ABC and DEF are similar.

This means that corresponding parts of the two triangles are equal in measure. Specifically, ∠A and ∠D are equal in measure, as are ∠B and ∠E.

Therefore, the corresponding sides AB and DE are equal in measure.

A way to show that the two triangles are similar is by using the AA Similarity Postulate.

This postulate states that if two angles of one triangle are equal in measure to two angles of a second triangle, then the two triangles are similar. In this case, [tex]∠A ≅ ∠D and B ≅ ∠E[/tex], which means the two triangles are similar.

for such questions on triangles

https://brainly.com/question/17335144

#SPJ11

Answer:

Length = 53 feet

Width = 22 feet

Step-by-step explanation:

Perimeter = 2(length + width)

Then:

a = 2w + 9            Ec. 1

150 = 2(a + w)       Ec. 2

a = length

w = width

From Eq. 1:

a - 9 = 2w            Eq. 3

From Eq. 2:

150 = 2*a + 2*w

150 = 2a + 2w

150 - 2a = 2w        Eq. 4

Equalizing Eq. 3 and Eq. 4

a - 9 = 150 - 2a

a + 2a = 150 + 9

3a = 159

a = 159/3

a = 53

From Eq. 1:

a = 2w + 9

53 = 2w + 9

53 - 9 = 2w

44 = 2w

44/2 = w

w = 22

Check:

From Eq. 2

150 = 2(a+w)

150 = 2(53+22)

150 = 2*75

Answer:

The 2nd equation is false.

Step-by-step explanation:

You don't even have to solve. DE is not 58, it's 40.

The 2nd equation is false.

Keenan's z-score is 0.71, rounded to the nearest hundredth.

The z-score measures how many standard deviations an individual's score is from the mean, and can be calculated using the formula:

z = (x - μ) / σ

where x is the individual's score, μ is the mean score, and σ is the standard deviation.

For Keenan's exam:

z = (80 - 77) / 4.2

z = 0.71

Therefore, Keenan's z-score is 0.71, rounded to the nearest hundredth.

Rounding to the nearest hundredth means the rounding of any decimal number to its nearest hundredth value. In decimal, hundredth means 1/100 or 0.01. For example, the rounding of 2.167 to its nearest hundredth is 2.17.

To know more about nearest hundredth, visit: brainly.com/question/809709

#SPJ4

a) To write the ratio of the number of machines to the number of crates packed per day in the form 1: n, we need to find the number of crates packed per day per machine. We can do this by dividing the total number of crates packed per day by the number of machines:

Number of crates packed per day per machine = 150 crates/day ÷ 60 machines = 2.5 crates/machine/day

Therefore, the ratio of the number of machines to the number of crates packed per day in the form 1: n is 1:2.5 or 2:5.

b) To find out how many crates of limes 70 of these machines would pack per day, we can use the ratio from part (a) to set up a proportion:

1 machine : 2.5 crates/day = 70 machines : x crates/day

Solving for x, we get:

x = (70 machines × 2.5 crates/day) / 1 machine = 175 crates/day

Therefore, 70 of these machines would pack 175 crates of limes per day.

Step-by-step explanation:

a) The ratio of the number of machines to the number of crates packed per day can be written as:

60 : 150

To simplify this ratio, we can divide both sides by 10:

6 : 15

Finally, we can divide both sides by 3 to get the ratio in the form 1 : n:

1 : 2.5

Therefore, the ratio of the number of machines to the number of crates packed per day is 1 : 2.5.

b) If 60 machines can pack 150 crates per day, then one machine can pack:

150/60 = 2.5 crates per day

So, 70 machines can pack:

70 × 2.5 = 175 crates per day

Therefore, 70 machines can pack 175 crates of limes per day.

In the following question, among the given options, the statement is said to be, The pooled estimate of the standard deviation for the data given is √(54.14^2/10 + 24.26^2/10) = 22.74.

According to the rule for examining standard deviations in ANOVA from Chapter 12 (page 560), the within-group standard deviation should be no more than twice the size of the between-group standard deviation. In this case, the between-group standard deviation is 44.85 and the within-group standard deviation (22.74) is less than twice the size of the between-group standard deviation, so it is reasonable to use a pooled standard deviation for the analysis of these data.

For more such questions on deviation

https://brainly.com/question/475676

#SPJ11

The probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.

The given table represents the joint probability mass function of the random variables, pxyc (r, y, c). r, y, and c denote the temperature, shock sensor, and health status of the disk drive. The values of r, y, and c are binary.The joint probability mass function of three random variables r, y, and c can be represented as follows:pxyc (r, y, c)= P(r, y, c)Here,P(r=0, y=0, c=0)= 0.1, P(r=0, y=1, c=0)= 0.2, P(r=1, y=0, c=0)= 0.2,P(r=0, y=0, c=1)= 0, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0,P(r=0, y=0, c=0)= 0, P(r=0, y=1, c=0)= 0, P(r=1, y=1, c=0)= 0.05,P(r=0, y=0, c=1)= 0.25, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0.From the given table, the probability of the disk drive being in a normal state, C=0, is P(C=0)=P(r=0, y=0, c=0)+P(r=0, y=1, c=0)+P(r=1, y=0, c=0)=0.1+0.2+0.2=0.5Hence, the probability of the disk drive being in a failed state, C=1, is:P(C=1)=P(r=0, y=0, c=1)+P(r=0, y=1, c=1)+P(r=1, y=0, c=1)+P(r=1, y=1, c=0)=0.25+0+0+0.05=0.3Therefore, the probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.

Learn more about Probability

brainly.com/question/11234923

#SPJ11

The Length of AB in square ABCD is 30 feet.

Since the squares ABCD and EFGH are similar, their corresponding sides are proportional, so we can set up the following relation:

AB/EF = 1/4

We can also use the fact that the ratio of the areas of two similar figures is equal to the square of the ratio of their corresponding sides. Therefore,

AB²/EF² = (Area of square ABCD)/(Area of square EFGH)

Substituting the given values:

AB²/EF² = (Area of square ABCD)/(14400)

Since the areas of squares are proportional to the square of their sides, we can write,

Area of square ABCD/Area of square EFGH = (AB/EF)²

Substituting this into the above equation and solving for AB, we get,

AB²/EF² = (AB/EF)²

AB² = (AB/EF)² * EF²

AB² = (1/4)² * 14400

AB² = 900

AB = 30 feet

Therefore, the length of the side AB of square ABCD is 30 feet.

Learn more about squares on

https://brainly.com/question/28776767?referrer=searchResults

#SPJ4

Answer:

Step-by-step explanation:

Answer:

- 1 and 7

Step-by-step explanation:

to find h(0) substitute x = 0 into h(x)

h(0) = 4(0) - 1 = 0 - 1 = - 1

to find h2) substitute x = 2 into h(x)

h(2) = 4(2) - 1 = 8 - 1 = 7

Answer:

To find the point that partitions the line segment AB in a ratio of 1:3, we can use the following formula:

P = (3B + 1A) / 4

where P is the point that partitions the line segment in a ratio of 1:3, A and B are the endpoints of the line segment, and the coefficients 3 and 1 represent the ratio of the segment we are dividing.

Substituting the values, we get:

P = (3*(-1, -5) + 1*(-5, 3)) / 4

P = (-3, -7)

Therefore, the point that partitions the line segment AB in a ratio of 1:3 is (-3, -7).

Step-by-step explanation:

The expression 4 triangles to 16 squares when simplified is 1 triangle to 4 squares

Given that

4 triangles to 16 squares

When expressed as ratio, we have

Triangle : Square = 4 : 16

To simplify the ratio Triangle : Square = 4 : 16, we can divide both the numerator and denominator by their greatest common factor, which is 4.

So, we have

Triangle : Square = 4 : 16

Divide both sides by 4:

Triangle/4 : Square/4 = 1 : 4

So the simplified ratio is 1 : 4, which means for every one triangle, there are four squares.

Read more about ratio at

https://brainly.com/question/12024093

#SPJ1

The vector u2 is (0, √3/3, 2/3). It is a unit vector that is orthogonal to both 8,-8,8 and 0,5,5.

Given two vectors 8,-8,8 and 0,5,5, we need to find another unit vector that is orthogonal to both the given vectors. Let's call this vector u1.The vector u1 can be obtained by taking the cross product of the two given vectors:u1 = (8,-8,8) × (0,5,5)u1 = (-40,-40,40)

To get a unit vector, we need to normalize u1 by dividing it by its magnitude:|u1| = √((-40)² + (-40)² + 40²) = 60u1 = (-40/60, -40/60, 40/60) = (-2/3, -2/3, 1/3)Now we need to find another unit vector that is orthogonal to u1.

One way to do this is to take the cross product of u1 with another vector, and then normalize the result. We can choose any vector that is not parallel to u1. For example, we can choose the vector (1,0,0).u2 = u1 × (1,0,0)u2 = (-2/3, -2/3, 1/3) × (1,0,0)u2 = (0,1/3,2/3)

To get a unit vector, we need to normalize u2 by dividing it by its magnitude:|u2| = √(0² + (1/3)² + (2/3)²) = 1/√3u2 = (0, √3/3, 2/3)

Learn more about Unit Vector

brainly.com/question/30279109

#SPJ11

The correct answer is option (C).

Sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent are the six functions (cot).

The equation t = Q - P, where Q and P are the specified locations, can be used to determine the components of the vector t. Therefore:

t = (–18, 2) – (–13, 11) = (–18 + 13, 2 – 11) = (–5, –9) (–5, –9)

The vector's magnitude is given by:

|t| = √(–5)^2 + (–9)^2 = √106 ≈ 10.296

The formula = tan1 (y/x), where x and y are the vector's components, can be used to determine the direction of the vector t. The direction must be expressed in terms of sine and cosine functions because we are required to represent the vector in trigonometric form.

θ = tan⁻¹ (–9/–5) ≈ 60.945°

In trigonometric form, the vector t is thus represented as follows:

t = [t|cos|i] + [t|sin|j]

We get the following by altering the values of |t| and:

t = 10.296 cos I + 10.296 sin j of angle 60.945

As a result, the following is the proper trigonometric representation of the vector t:

t = 10.296 cos I + 10.296 sin j of angle 60.945

Thus, alternative is the right response (C).

To know more about Trignometric visit:

https://brainly.com/question/29076920

#SPJ1

To perform matrix multiplication in MIPS, we can use nested loops to iterate over the rows and columns of the matrices.

The outer loop iterates over the rows of the first matrix, while the inner loop iterates over the columns of the second matrix. We then perform the dot product of the corresponding row and column, which involves multiplying the elements and summing the products.

To perform multiplication efficiently, we can use MIPS registers to store intermediate values and avoid accessing memory unnecessarily. We can also use assembly instructions like "lw" and "sw" to load and store values from memory, and "add" and "mul" to perform arithmetic operations.

In summary, matrix multiplication in MIPS involves nested loops, efficient use of registers and assembly instructions, and arithmetic operations.

For more questions like MIPS click the link below:

https://brainly.com/question/4196231

#SPJ11

a) P-value = P(z<1.47) = 0.9292.

b) P-value = P(z>2.70) = 0.0036.

c) P-value = 2 × P(z>2.70) = 0.0072.

d) P-value = P(z>2.5) = 0.0062.

Z-test is a statistical test for the null hypothesis, which refers to the population mean, where the population standard deviation is known. P-value represents the probability value for any hypothesis, where a small p-value indicates that the null hypothesis is less accurate.

P-value, for the given values of z-test is calculated as follows: a) For ha: p < .6, z=1.47The p-value for this hypothesis test is calculated as follows: P-value = P(z<1.47) = 0.9292. Therefore, the P-value is 0.9292. b) For ha: p > .6, z=2.70The p-value for this hypothesis test is calculated as follows.

P-value = P(z>2.70) = 0.0036. Therefore, the P-value is 0.0036.c) For ha: p ≠ .6, z=2.70The p-value for this hypothesis test is calculated as follows: P-value = 2 × P(z>2.70) = 0.0072.

Therefore, the P-value is 0.0072.d) For ha: p > .6, z=2.5The p-value for this hypothesis test is calculated as follows: P-value = P(z>2.5) = 0.0062. Therefore, the P-value is 0.0062.

Learn more about Z Test

brainly.com/question/15683598

#SPJ11

Answer:

If the GM between √2 and 2√2 is a find the value of a.​

Step-by-step explanation:

To find the geometric mean between two numbers, we simply take the square root of their product.

In this case, we want to find the geometric mean between √2 and 2√2.

Their product is:

√2 * 2√2 = 2√4 = 2*2 = 4

So, the geometric mean between √2 and 2√2 is the square root of 4, which is:

√4 = 2

Therefore, the value of a is 2.

As per the given APR, the sum of amount after 18 years is $66,373. 60, and the total deposits made over the time period is  $43,200. (option d).

To calculate this, we can use the formula for future value of an annuity:

FV = PMT x (((1 + r)⁻¹) / r)

where FV is the future value, PMT is the monthly payment, r is the monthly interest rate (which is calculated by dividing the APR by 12), and n is the number of payments (which is 18 x 12 = 216 in this case).

Plugging in the numbers, we get:

FV = $200 x (((1 + 0.045/12)²¹⁶ - 1) / (0.045/12)) = $66,373.60

Therefore, you would have approximately $66,373.60 in your investment plan after 18 years.

Now let's compare this amount to the total deposits made over the time period. In this case, the total deposits would be:

$200 x 12 x 18 = $43,200

Hence the correct option is (d).

To know more about APR here

https://brainly.com/question/14184570

#SPJ4

The answer to the question is 334 kittens.

Given that a cat gave birth to 333 kittens who each had a different mass between 147 g and 159 g. Then the cat gave birth to a 4th kitten with a mass of 57 g.

First of all, we will find out the range of the mass of kittens. The range is given as follows;Range = Maximum Value - Minimum Value Range = 159 g - 147 g Range = 12 g

Now, the cat gave birth to a 4th kitten with a mass of 57 g, we can say that the minimum value of kitten's mass is 57 g.So, the maximum value of kitten's mass can be calculated as follows;Maximum Value = 57 g + Range Maximum Value = 57 g + 12 g Maximum Value = 69 g Now, we can say that all kittens with a mass of 69 g or less would be born because the minimum value of kitten's mass is 57 g and the range of mass is 12 g.

Therefore, the answer to the question is 334 kittens.

Learn more about Range

brainly.com/question/28135761

#SPJ11

Answer:

P = [tex]2y^{2}[/tex] + 4xy +4

Q = [tex]-3y^{2}[/tex] + 7 -3xy

R = -3xy +8

Step-by-step explanation:

A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.

To determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.

We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).

Here's how to solve the problem:

1 pound = 16 ounces

Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces

The weight of one toy car is 7 ounces.

Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):

448 ÷ 7 = 64

Therefore, the bin can hold 64 toy cars.

Learn more about weight limit at

https://brainly.com/question/14375094

#SPJ11

The three examples of contracts are:

Contracts are legal agreements between two or more parties that involve the exchange of goods, services, or money. They can be classified as unilateral or bilateral, express or implied, executed or executory.

Here are three examples of contracts that a person can be a part of:

To know more about the "contracts":https://brainly.com/question/5746834

#SPJ11

By answering the presented question, we may conclude that So, the Pythagorean theorem length of MN is expressed in terms of a and b.

Its Pythagorean theorem is just a fundamental mathematical principle that explains the connection between the sides of a triangle that is right. It asserts that the sum of the squares of both the widths of the other two sides is a square of both the width of the hypotenuse (the side facing the perfect angle) the side opposite the right angle). The mathematical mathematics is as follows: c2 = a2 + b2 At which "c" indicates the length of the right triangle and "a" and "b" reflect the extents of the additional two sides, started referring to as the legs.

Because M is the midpoint of OE and N is the midpoint of AB, we can draw a line segment connecting M and N that is parallel to OB and AE and perpendicular to AB.

the Pythagorean theorem

[tex]OE² = OX² + XE²OE²[/tex]

[tex](a + b/2)² + (2a - b/√3)²OE² = 7a²/4 + 3ab/2 + b²/4AN²[/tex]

[tex]AE² + EN²AN² = (2a√3)² + (b/2)²AN²[/tex]

[tex]12a² + b²/4MN² = AN² + AM²MN² \\\\ 12a² + b²/4 + (7a²/4 + 3ab/2 + b²/4)MN²\\\\19a²/2 + 3ab/2 + b²/2MN = √(19a²/2 + 3ab/2 + b²/2)[/tex]

So, the length of MN is expressed in terms of a and b.

To know more about Pythagorean theorem visit:

brainly.com/question/14930619

#SPJ1

Answer: $22.50

Step-by-step explanation:

Let x be the cost per pound of the secret-formula coffee beans.

The total cost of the secret-formula beans is 12x dollars.

The total cost of the other beans is 15 × 18 = 270 dollars.

The total cost of the mix is (12 + 15) × 20 = 540 dollars.

Since the barista mixed 12 pounds of the secret-formula beans with 15 pounds of the other beans, the total weight of the mix is 12 + 15 = 27 pounds.

We can set up an equation based on the total cost of the mix:

12x + 270 = 540

Subtracting 270 from both sides:

12x = 270

Dividing both sides by 12:

x = 22.5

Therefore, the barista's secret-formula coffee beans cost $22.50 per pound.