If John had 3 apples then Droped 2 then found 4 then gave one to his friend how many apples does he have now​

Answer: Below :)

Step-by-step explanation:

A) To find the profit, we first need to calculate the cost of the produce plus the 25% markup.

The markup is 25% of the cost, which is 0.25 * 500 = €125.

So the total cost of the produce plus markup is €500 + €125 = €625.

Now, if the greengrocer sells all the produce, the total revenue will be 100% plus the 25% markup, which is 125% of the original cost.

125% of €500 is 1.25 * 500 = €625, which is the same as the cost plus markup.

Therefore, the profit is the markup, which is €125.

B) To find the total income, we add the profit to the total cost:

Total income = €500 + €125 = €625

Answer:

A)  €125

B)  €625

The probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793 and the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057 and the probability in part (b) is much higher because the standard deviation is smaller for the x distribution.

What do you mean by normally distributed data?

In statistics, a normal distribution is a probability distribution of a continuous random variable. It is also known as a Gaussian distribution, named after the mathematician Carl Friedrich Gauss. The normal distribution is a symmetric, bell-shaped curve that is defined by its mean and standard deviation.

Data that is normally distributed follows the pattern of the normal distribution curve. In a normal distribution, the majority of the data is clustered around the mean, with progressively fewer data points further away from the mean. The mean, median, and mode are all the same in a perfectly normal distribution.

Calculating the given probabilities :
(a) The probability that an 18-year-old man selected at random is between 70 and 72 inches tall can be found by standardizing the values and using the standard normal distribution table. First, we find the z-scores for 70 and 72 inches:

[tex]z-1 = (70 - 71) / 5 = -0.2[/tex]

[tex]z-2 = (72 - 71) / 5 = 0.2[/tex]

Then, we use the table to find the area between these two z-scores:

[tex]P(-0.2 < Z < 0.2) = 0.0793[/tex]

So the probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793.

(b) The mean height of a sample of eight 18-year-old men can be considered a random variable with a normal distribution. The mean of this distribution will still be 71 inches, but the standard deviation will be smaller, equal to the population standard deviation divided by the square root of the sample size:

[tex]\sigma_x = \sigma / \sqrt{n} = 5 / \sqrt{8} \approx 1.7678[/tex]

To find the probability that the sample mean height is between 70 and 72 inches, we standardize the values using the sample standard deviation:

[tex]z_1 = (70 - 71) / (5 / \sqrt{8}) \approx -1.7889[/tex]

[tex]z_2 = (72 - 71) / (5 / \sqrt{8}) \approx 1.7889[/tex]

Then, we use the standard normal distribution table to find the area between these two z-scores:

[tex]P(-1.7889 < Z < 1.7889) \approx 0.9057[/tex]

So the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057.

(c) The probability in part (b) is much higher because the standard deviation is smaller for the x distribution. When we take a sample of eight individuals, the variability in their heights is reduced compared to the variability in the population as a whole. This reduction in variability results in a narrower distribution of sample means, with less probability in the tails and more probability around the mean. As a result, it becomes more likely that the sample mean falls within a given interval, such as between 70 and 72 inches.

To know more about normal distribution visit :

brainly.com/question/29509087

#SPJ1

Answer:

Point-Slope Form: y - 1 = -1/2(x - 4) or Standard Form: y = -1/2x + 3

Step-by-step explanation:

For a line to be perpendicular, you take the negative inverse of the slope of 2x - y = 4. To do this, rearrange the y to one side and you get y = 2x - 4. The slope of the line is 2. So, taking the negative inverse would be -1/m (with m being slope of the the equation given in the problem. This would give you -1/2.

Using point slope formula, y - y1 = m(x - x1), you can plug in the point given, (4,1) and the slope you found to get y - 1 = -1/2(x - 4). For standard form, isolating the y gets you y = -1/2x + 3.

You can check your answer by using Desmos by putting in the line 2x - y = 4, the point (4,1), and the equation you got as your answer. You will see that the equation is perpendicular to 2x - y = 4 and passes through point (4,1). Your equation of the line is y - 1 = -1/2(x - 4) or y = -1/2x + 3

The slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

What is slope?

Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.

1) The given points , [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (6,8)[/tex] then,

=> slope  = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex] = [tex]\frac{8-1}{6-0} = \frac{7}{6}[/tex]

2) The given points [tex](x_1,y_1) =(-1,10)[/tex] and [tex](x_2,y_2) = (-5,-4)[/tex] then,

=> Slope = [tex]\frac{-4-10}{-5+1} = \frac{-14}{-4}=\frac{7}{2}[/tex]

3)  The given points [tex](x_1,y_1) =(-10,2)[/tex] and [tex](x_2,y_2) = (-3,-5)[/tex] then,

=> slope = [tex]\frac{-5-2}{-3+10} = \frac{-7}{7}=-1[/tex]

4)  The given points [tex](x_1,y_1) =(-3,-4)[/tex] and [tex](x_2,y_2) = (-1,-8)[/tex] then,

=> slope = [tex]\frac{-8+4}{-1+3} = \frac{-4}{2}=-2[/tex]

5)The given points [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (-9,-9)[/tex] then,

=> slope = [tex]\frac{-9-1}{-9+0} = \frac{-10}{-9}=\frac{10}{9}[/tex]

Hence the slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

To learn more about slope refer the below link

https://brainly.com/question/16949303

#SPJ1

The triangle LMN, with vertices L(6, −8), M(4, −4), and N(−12, 2), dilated with respect to the origin by a scale factor of 1/2, results in triangle L'M'N', with vertices L'(3, -4), M'(2, -2), and N'(-6, 1)

To dilate a triangle with respect to the origin, we need to multiply the coordinates of each vertex by the scale factor. In this case, the scale factor is 1/2, so we multiply each coordinate by 1/2.

The coordinates of L' are obtained by multiplying the coordinates of L by 1/2:

L'((1/2)6, (1/2)(-8)) = (3, -4)

The coordinates of M' are obtained by multiplying the coordinates of M by 1/2:

M'((1/2)4, (1/2)(-4)) = (2, -2)

The coordinates of N' are obtained by multiplying the coordinates of N by scale factor 1/2:

N'((1/2)×(-12), (1/2)×2) = (-6, 1)

Learn more about dilation here

brainly.com/question/26155897

#SPJ4

The given question is incomplete, the complete question is:

Triangle LMN with vertices L(6, −8), M(4, −4), and N(−12, 2) is dilated with respect to origin by a scale factor of 2 to obtain triangle L′M′N′. What are the new coordinates of  L′M′N′ ?

The number of students traveling are 2 students out of the 30 who are traveling out of the country this summer.  If 1/3 of the students are traveling somewhere this summer, then we can calculate the number of students who are traveling by multiplying the total number of students by 1/3:

Number of students traveling = 30 x 1/3 = 10  

Now, we need to find out how many of these 10 students are traveling out of the country. We know that 1/5 of the students who are traveling are going out of the country, so we can find the number of students who are traveling out of the country by multiplying the total number of traveling students by 1/5:

Number of students traveling out of the country = 10 x 1/5 = 2

Therefore, there are 2 students out of the 30 who are traveling out of the country this summer.

It's important to note that fractions can be converted to decimals or percentages to make them easier to work with. For example, 1/3 can be written as 0.33 or 33%, and 1/5 can be written as 0.20 or 20%. This can be particularly useful when dealing with more complex problems or when working with larger numbers.

In summary, by using the information given, we can determine that out of the 30 students in Mr. Hall's class, 10 are traveling somewhere this summer, and out of those 10 students, 2 are going out of the country. This type of problem-solving helps build math skills that are applicable in real-world scenarios, such as budgeting and planning for travel.

To know more about  traveling click here:

brainly.com/question/17235551

#SPJ4

The amount that each type would be 11.87 lbs of cashews and 15.13 lbs of brazil nuts

1. First, find the total cost of 27 lbs of the mixture: 27 lbs x $6.41/lb = $171.07.
2. Next, find the cost of cashews and brazil nuts in the mixture. Cashews cost $7.70/lb and brazil nuts cost $4.80/lb.
3. Subtract the cost of the brazil nuts from the total cost of the mixture: $171.07 - (27 lbs x $4.80/lb) = $105.27.
4. Divide the cost of the cashews ($105.27) by the cost of one pound of cashews ($7.70): $105.27/$7.70 = 13.66 lbs.
5. Subtract the number of pounds of cashews (13.66) from the total pounds of the mixture (27) to find the number of pounds of brazil nuts: 27 - 13.66 = 15.13 lbs.
6. Therefore, the mixture should contain 11.87 lbs of cashews and 15.13 lbs of brazil nuts.

See more about total cost at: https://brainly.com/question/5168855

#SPJ11

Random sampling 50 batteries throughout the day and testing to see if they would provide most valid results.

A sample is described as a smaller, more manageable representation of a larger group. A smaller population with characteristics of a larger one. A sample is used in statistical analysis when the population size is too large to include all participants or observations in the test.

The sample may be biased if it is taken from the first 25 batteries made each day or the last 25 batteries made each day.

The first and last battery made each day could not be an accurate representation of the total quality of the batteries produced that day if the battery manufacturing process is not consistent thought the day.

Although the battery quality can change during the day, sampling the first 50 batteries produced each day may also add bias into the sample.

The ideal course of action is to randomly select 50 batteries throughout the day, since this helps to ensure that the sample is reflective of the general calibre of batteries manufactured that day.

A more accurate image of the quality of the batteries manufactured can be obtained using this method, which is also more likely to capture any variations in battery quality over the day.

To know more about Random sampling go through:-

https://brainly.com/question/13219833

#SPJ4

Based on the given data, The shape's whole surface area is about 252 mm².

Based on the image, the shape appears to be a set of rectangles with different lengths and widths.

To find the area of this shape, we can break it down into smaller rectangles and add up their areas.

Starting from the bottom, we can see that the first rectangle has a length of 6 mm and a width of 4 mm. Its area is:

Area1

= 6 mm × 4 mm

= 24 mm²

Moving up to the second rectangle, we see that it has a length of 6 mm and a width of 3 mm. Its area is:

Area2

= 6 mm × 3 mm

= 18 mm²

The third rectangle has a length of 6 mm and a width of 5 mm. Its area is:

Area3

= 6 mm × 5 mm

= 30 mm²

The fourth rectangle has a length of 6 mm and a width of 3 mm. Its area is:

Area4

= 6 mm × 3 mm

= 18 mm²

The fifth rectangle has a length of 6 mm and a width of 15 mm. Its area is:

Area5

= 6 mm × 15 mm

= 90 mm²

The sixth rectangle has a length of 3 mm and a width of 9 mm. Its area is:

Area6

= 3 mm × 9 mm

= 27 mm²

Finally, the seventh rectangle has a length of 5 mm and a width of 9 mm. Its area is:

Area7

= 5 mm × 9 mm

= 45 mm²

To find the total area of the shape, we can add up the areas of all seven rectangles:

Total Area

= Area1 + Area2 + Area3 + Area4 + Area5 + Area6 + Area7

= 24 mm² + 18 mm² + 30 mm² + 18 mm² + 90 mm² + 27 mm² + 45 mm²

= 252 mm²

Therefore, the total area of the shape is approximately 252 mm².

To learn more about area click here

brainly.com/question/27683633

#SPJ4

Therefore, Person A is approximately 95.17 miles away from the building.

To find out how far person A is from the building, we'll need to use trigonometry. The diagram below shows the situation.

Given that Person A's angle of elevation to the building is 35 degrees, we'll let angle BAC be 35 degrees.

Similarly, since Person B's angle of elevation is 77 degrees, we'll let angle ABC be 77 degrees. We'll also let AB be x, the distance from Person A to the building, and BC be 8 miles, the distance from Person B to the building.

First, we'll use the tangent function to find the height of the building. In triangle ABC, tan(77) = height/8. Solving for the height, we get:

height = 8tan(77) ≈ 61.23 miles.

Next, we'll use the tangent function again to find x. In triangle ABC, tan(35) = height/x + 8. Solving for x, we get:

x = (height)/(tan(35)) - 8
≈ 103.17 miles - 8
≈ 95.17 miles.
for such more questions on  elevation

https://brainly.com/question/25748640

#SPJ11

Jada overtakes Elena after 7.5 seconds.

The set of equations that best captures the scenario is =y=15+20x.

Let's establish a coordinate system with Elena's starting point as the origin. Elena's separation from the origin at time x is given by: y=15+20x

y1 = 15 + 20x

Jada's distance from the origin at time x is determined similarly by:

y2 = 22x

Finding the moment x at which Jada overtakes Elena and their distances from the origin are equal is our goal.

y1 = y2

With the formulas for y1 and y2 substituted, we obtain:

15 + 20x = 22x

When we simplify this equation, we obtain:

2x = 15

x = 7.5

Jada therefore overtakes Elena after 7.5 seconds.

To know more about set of equations, click the below link

https://brainly.com/question/90105

#SPJ4

By using  Bayes' theorem in probability.

a) The probability that isaac would not become a hurricane but remain a tropical storm when it reached the gulf of mexico is 0.31.

b) P(H|c) = 0.4493

c) It can be observed that the likelihood of a tropical storm developing into a hurricane decreases slightly when it passes over Cuba. This can be inferred from the fact that the conditional probability of a hurricane forming given that the storm has passed over Cuba (P(H|c) = 0.4493) is lower than the initial probability of 0.69.

a) The probability that Isaac would not become a hurricane but remain a tropical storm when it reached the Gulf of Mexico is:

P(not hurricane) = 1 - P(hurricane) = 1 - 0.69 = 0.31

So the probability is 0.31 (to 2 decimals).

b) We need to use Bayes' theorem to calculate the probabilities:

P(c|H) = P(H|c) * P(c) / P(H)

P(c|T) = P(T|c) * P(c) / P(T)

where c denotes passing over Cuba, H denotes becoming a hurricane, and T denotes remaining a tropical storm.

From the problem, we have:

P(H) = 0.69

P(T) = 1 - P(H) = 0.31

P(c|H) = 0.08

P(c|T) = 0.20

To calculate P(c), we need to use the law of total probability:

P(c) = P(c|H) * P(H) + P(c|T) * P(T)

= 0.08 * 0.69 + 0.20 * 0.31

= 0.1228

Now we can calculate P(c|H) and P(c|T):

P(c|H) = 0.08 * 0.69 / 0.1228

= 0.4493 (to 2 decimals)

P(c|T) = 0.20 * 0.31 / 0.1228

= 0.5065 (to 2 decimals)

To calculate P(H|c), we use Bayes' theorem again:

P(H|c) = P(c|H) * P(H) / P(c)

= 0.08 * 0.69 / 0.1228

= 0.4493 (to 4 decimals)

c) Passing over a landmass such as Cuba can alter the probability of becoming a hurricane because it can either enhance or weaken the storm. In this case, we can see that the probability of becoming a hurricane is actually slightly lower when a tropical storm passes over Cuba, as P(H|c) = 0.4493 is lower than the initial probability of 0.69. However, it is important to note that this is just one example and the effect of passing over a landmass can vary depending on many factors.

To know about "Bayes' theorem": https://brainly.com/question/14989160

#SPJ11

Answer:

Step-by-step explanation:

i think you have to times it

A. deposit $735.03 one year from now. B. $210.48 for each of the four years. C. choose the lump sum of $750 from your father. D. Interest rate of 7.4% compounded annually. E. Interest rate of 12%.

a. To have a balance of $1,000 four years from now, you need to calculate the present value of this amount. Using the compound interest formula, we can calculate that you need to deposit $735.03 one year from now to have a balance of $1,000 four years from now.

b. If you want to make equal payments at Years 1 through 4 to accumulate the $1,000, you can use the annuity formula to calculate the required payments. The formula gives us a payment of $210.48 for each of the four years.

c. If your father were to offer either to make the payments calculated in part b or to give you a lump sum of $750 one year from now, you can compare the present value of both options. The present value of the four payments of $210.48 each, using an 8% annual interest rate, is $682.96. Therefore, you would choose the lump sum of $750 from your father.

d. If you have only $750 one year from now, you can use the compound interest formula to calculate the interest rate you need to earn to have $1,000 four years from now. Using the formula, we get an interest rate of 7.4% compounded annually.

e. If you can only deposit $186.29 each at Years 1 through 4, you can use the compound interest formula to calculate the interest rate you need to earn to have $1,000 four years from now. Using the formula, we get an interest rate of 12% compounded annually.

Learn more about compound interest here: brainly.com/question/14295570

#SPJ4

Complete question:

Assume that 4 years from now you will need $1,000. Your bank compounds interest at an 8% annual rate.

a. How much must you deposit 1 year from now to have a balance of $1,000 4 years from now?

b. If you want to make equal payments at Years 1 through 4 to accumulate the $1,000, how much each of the 4 payments be?

c. If your father were to offer either to make the payments calculated in part b or to give you a lump sum of $750 1 year from now, which would you choose?

d. If you have only $750 1 year from now, what interest rate, compounded annually, would you have to earn to have the necessary $1,000 4 years from now? 7.4%

e. Suppose you can deposit only $186.29 each at Years 1 through 4, but you still need $1,000 at Year 4. What interest rate, with annual compounding, must you seek out to achieve your goal?

Answer:

9.5 decimal

espero y te ayude

Answer:

circumference=50.24

Step-by-step explanation:

c=2x3.14xr

c=2x3.14x(8)

c=50.24

Answer:

(2, 0) and (-1, 0)

Step-by-step explanation:

[tex]4x^2 - 4x - 8 = 0 \text{ // Divide by 4} \\x^2 - x - 2 = 0\\\\x_{1, 2} = \frac{-(-1) \pm \sqrt{(-1)^2 - 4 \times 1 \times (-2)}}{2\times1}\\\\x_{1, 2} = \frac{1 \pm \sqrt{1 + 8}}2\\\\x_{1, 2} = \frac{1 \pm \sqrt9}2\\\\x_{1, 2} = \frac{1 \pm 3}2\\\\x_1 = \frac{1 + 3}2 = \frac42 = 2\\\\x_2 = \frac{1 - 3}2 = \frac{-2}2 = -1[/tex]

Therefore, the zeroes are (2, 0) and (-1, 0).

Answer:

WELL 17

Step-by-step explanation:

60 DIVED BY 5 IS 12

SO 12 DIVIDED BY 204 IS 17 SOOOOOO 17 IS THE ANS

An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.

Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.

The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.

Learn more about Probability here: https://brainly.com/question/25839839

#SPJ11

The value of x in the equation 1/4(4 + x) = 4/3 is x = 4/3.

Multiply both sides of the equation by 4 to eliminate the fraction on the left-hand side:

1/4(4 + x) = 4/3

4 * 1/4(4 + x) = 4 * 4/3

Simplifying:

4 + x = 16/3

Subtract 4 from both sides of the equation:

4 + x - 4 = 16/3 - 4

Simplifying:

x = 16/3 - 12/3

x = 4/3

A fraction is a mathematical concept used to represent a part of a whole or a ratio between two quantities. It is typically written in the form of a numerator (top number) over a denominator (bottom number), separated by a horizontal line. For example, the fraction 1/2 represents one out of two equal parts, or half of a whole. Similarly, the fraction 3/4 represents three out of four equal parts, or three-quarters of a whole.

Fractions are an essential part of mathematics and are used in a wide range of applications, including measurements, cooking, and financial calculations. They can be added, subtracted, multiplied, and divided just like whole numbers, but they require a bit more care in their manipulation due to their unique structure.

To learn more about Fraction visit here:

brainly.com/question/10354322

#SPJ4

The distance Mrs. Smith covers is 3520 yards during the duration of the week by Friday morning.

One week has seven days in total.

Mrs. Smith walks half a mile each day after work, she walks a total of

0.5 miles/ day × 7 days/ week = 3.5 miles/ week

Now, if we calculate the distance on Friday morning, she must have walked four times till Friday morning since she has to walk after her work.

Therefore,

0.5 miles/ day × 4 days = 2 miles

To convert miles to yards, we can use the fact that there are 1760 yards in one mile:

2 miles/week × 1760 yards/mile = 3520 yards/week

Therefore, by Friday morning, Mrs. Smith will have walked 3520 yards.

To learn more about the distance at

https://brainly.com/question/26264531

#SPJ4

Answer:

112°

Step-by-step explanation:

Finding the unknown angle in a quadrilateral:

        Sum of all angles of a quadrilateral = 360

                                      a + 49 + 72 + 127 = 360

                                                     a + 248  = 360

                                                                a = 360 - 248

                                                                a = 112°

Answer:

slope is 1/3

y-intercept is -4

Step-by-step explanation:

x - 3y = 12

3y = x - 12

y = 1/3x - 4

according to y = mx + b, m is slope and b is y-intercept

slope is 1/3

y-intercept is -4

The missing amounts for Walco Corporation and Gunther Enterprises assuming  all changes in stockholders equity are due to changes in retained earnings are
(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

A balance sheet is a financial statement that reports a company's assets, liabilities, and stockholder equity on a specific date. Assets are resources a company owns that have monetary value, liabilities are obligations that must be paid in the future, and stockholder equity is the difference between a company's assets and liabilities. To calculate the missing amounts, you need to subtract the beginning of year figures from the end of year figures.

a) Total liabilities + Total stockholders' equity = Total assets

Total liabilities + $54,000 = $100,000

Total liabilities = $46,000

(b) Total assets = Total liabilities + Total stockholders' equity

Total assets = $128,000 + $54,000

Total assets = $182,000

(c) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $167,000 - $4,900

Changes during year in retained earnings = $47,100

The missing values for Gunther Enterprises:

(d) Total liabilities + Total stockholders' equity = Total assets

$67,500 + $(e) = $159,000

$(e) = $91,500

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $(f) - $79,000 - $4,900

Changes during year in retained earnings = $(f) - $83,900

Using the balance sheet equation, we can find the missing values:

(d) Total liabilities = Total assets - Total stockholders' equity

Total liabilities = $159,000 - $67,500

Total liabilities = $91,500

(e) Total stockholders' equity = Total assets - Total liabilities

Total stockholders' equity = $190,000 - $50,000

Total stockholders' equity = $140,000

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $79,000 - $4,900

Changes during year in retained earnings = $135,100

Therefore, the missing amounts are:

(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

To learn more about the 'balance sheet':

https://brainly.com/question/1113933

#SPJ11

The distribution is skewed to the right.

If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.

This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.

The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.

Learn more about skewed distribution

brainly.com/question/1604092

#SPJ11

A. I and II only true if we use a large sample rather than a small one

sampling model

A sampling model is a statistical model used to describe the behavior of a sample statistic. In other words, it is a model that describes the distribution of a particular sample statistic, such as the mean or standard deviation, as it is repeatedly sampled from a population.

When a sample is drawn from a population that is strongly skewed to the left, a small sample may not accurately represent the true population mean. However, if a large sample is taken, the sample mean is more likely to be normally distributed, due to the central limit theorem. This means that both statement I and II are true.

Statement III is false because as the sample size increases, the variability of the sample means actually decreases. This is because larger samples tend to have less sampling error and are more representative of the population as a whole.

to know more about statistics, visit;

https://brainly.com/question/29093686

#SPJ1

Answer: 46.0 ft

Step-by-step explanation:

[tex]\text{sin} \ 24^o=\dfrac{x}{105}[/tex]

[tex]x=105 \ \text{sin 24}^o[/tex]

So, the distance above the ground is [tex]\text{105 sin} \ 24^o+3.25\thickapprox \boxed{46.0 \ \text{ft}}[/tex]

The given numbers are in decimal and binary system and the final result of the given operation is [tex](4675.31)_{10}[/tex].

A binary integer (base-2) is converted to an equivalent decimal number using the binary to decimal conversion formula. (base-10). In mathematics, integers are expressed using a number system. It is a method to display numerical data. The four various numeral systems are as follows:

System of Binary Numbers (Base-2)
system of octal numbers (Base-8)
System of Decimal Numbers (Base-10)
System of Hexadecimal Numbers (Base-16).
We are the two numbers:-

[tex](4623.56)_{10} , (110011.11)_{2}[/tex]

these are in decimal and binary system respectively.

now, we will express them in same system ( here we choose decimal system).

[tex](110011.11)_{2} = (2^{5} + 2^{4} + 0 + 0 + 2^{1} + 2^{0} + 2^{-1} + 2^{-2} )_{10} \\= (2^{5}+2^{4}+0*2^{4}+0*2^{3}+2^{1}+2^{0}+2^{-1}+2^{-2})_{10} \\= (32+16+2+1+0.5+0.25)_{10} \\= (51.75)_{10}[/tex]

Now, addition is done below:-

4623.56+51.75= 4675.31.

hence, the final result of the given operation= [tex](4675.31)_{10}[/tex]

To know more about binary system go through:-

https://brainly.com/question/16612919

#SPJ4