Answer:
the percent dissociation is 0.69 %
Explanation:
Given the data in the question;
benzoic acid C₆H₅CO₂H
C₆H₅COOH[tex]_{(aq)[/tex] ⇔ C₆H₅COO[tex]_{-(aq)[/tex] + H[tex]_{+(aq)[/tex]
Ka = [C₆H₅COO- ][ H+ ] / [ C₆H₅COOH ] = 6.28 × 10⁻⁵
given that it dissociated in a 1.3 M aqueous solution.
so Initial concentration is;
[ C₆H₅COOH ] = 1.3
[C₆H₅COO- ] = 0
[ H+ ] = 0
Change in concentration
[ C₆H₅COOH ] = -x
[C₆H₅COO- ] = +x
[ H+ ] = +x
Concentration equilibrium
[ C₆H₅COOH ] = 1.3 - x
[C₆H₅COO- ] = +x
[ H+ ] = +x
Hence,
x² / ( 1.3 - x ) = 6.28 × 10⁻⁵
6.28 × 10⁻⁵( 1.3 - x ) = x²
8.164 × 10⁻⁵ - 6.28 × 10⁻⁵x = x²
x² + 6.28 × 10⁻⁵x - 8.164 × 10⁻⁵ = 0
solve for x
ax² + bx - c = 0
x = [ -b ± √( b² - 4ac ) ] / [ 2a ]
we substitute
x = [ -6.28 × 10⁻⁵ ± √( (6.28 × 10⁻⁵)² - (4 × 1 × -8.164 × 10⁻⁵ ) ) ] / [ 2 × 1 ]
x = [ -6.28 × 10⁻⁵ ± 0.01807 ] / [ 2]
x = [ -6.28 × 10⁻⁵ - 0.01807 ] / [ 2] or [ -6.28 × 10⁻⁵ + 0.01807 ] / [ 2]
x = -0.0090664 or 0.0090036
so x = 0.0090036
hence
[ H+ ] = +x = 0.0090036 M
[C₆H₅COO- ] = +x = 0.0090036 M
Initial concentration of [ C₆H₅COOH ] = 1.3 M
concentration of C₆H₅COOH dissociated = 0.0090036 M
percent dissociation of C₆H₅COOH will be;
⇒ ( 0.0090036 M / 1.3 M ) × 100 = 0.69 %
Therefore, the percent dissociation is 0.69 %
e. Which of the following is a mixture? i. Water ii. Hydrogen iii. Air iv. Iron
water is known as the mixture
Answer:
iv. Iron
water is not a mixture
hydrogen is the simplest element
air is pure
Arrange the following in order of increasing melting point: NaCl, H2O, CH4, C6H4(OH)2.
a. NaCl < H2O < CH4 < C6H4(OH)2
b. CH4 < H2O < NaCl < C6H4(OH)2
c. CH4 < H2O < C6H4(OH)2 < NaCl
d. CH4 < C6H4(OH)2 < H2O < NaCl
e. CH4 < NaCl < C6H4(OH)2 < H2O
Explanation:
one thing to know is that higher surface area = higher boiling point.
NaCl has the smallest surface area, so it's the first one.
H2O has less surface area than methane, so it's second.
Methane has more surface area than H20, so it's third.
The big molecule has the most surface area, so it's last
Temperature measures the average kinetic energy of particles of the substances. Melting point is directly proportional to surface area. Therefore, the correct option is option C.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
Melting point is directly proportional to surface area. NaCl has the smallest surface area. Water has less surface area than methane. Methane has more surface area than H[tex]_2[/tex]O.
Therefore, the correct option is option C.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ2
The idea that the behavior of the states of matter is determined by the kinetic energy and movement of their particles is called _____…
A. Sublimation Theory
B. Kinetic Movement Theory
C. Kinetic Molecular Theory
D. Van der Waals Theory
Answer:
C . Kinetic Molecular Theory
When 1 mole of CO(g) reacts with H2O(l) to form CO2(g) and H2(g) according to the following equation, 2.80 kJ of energy are absorbed. CO(g) + H2O(l)CO2(g) + H2(g) Is this reaction endothermic or exothermic? _________ What is the value of q? kJ
0. When measuring tert-butyl alcohol for this experiment, a student first weighs an empty graduated cylinder, then pours 15 mL of the alcohol into the graduated cylinder and weighs the cylinder again. He records the amount of alcohol used as the difference in these two masses. What is wrong with this method
Answer:
Both have solutions in the graduated cylinder.
Explanation:
Recording the amount of alcohol used as the difference between two masses is the wrong method used for measuring tert-butyl alcohol for the experiment. For measuring tert-butyl alcohol for this experiment, the student has to measure the two masses when both the graduated cylinders has solution of tert-butyl alcohol not when one of it is empty (having no tert-butyl alcohol ).
The wrong aspect is that the liquid didn't need to be weighed. Instead the volume should have been recorded with the aid of the graduated cylinder.
What is a Graduated cylinder?This is a cylinder with marked readings and is used to measure the volume of liquids in the laboratory.
The graduated cylinder will accurately measure the amount of alcohol used due to it being volatile and the mass fluctuating during the measurement.
Read more about Graduated cylinder here https://brainly.com/question/24869562
Which processes occur during the second stage of technological design? Check all that apply.
designing a solution
studying relevant information
rebuilding and retesting
reporting a solution
defining criteria of success
identifying a problem
building a prototype
Avogradro's number is the number of particles in one gram of carbon- 12 atom true or false?
Answer:
True
Explanation:
The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12. 12.00 g C-12 = 1 mol C-12 atoms = 6.022 × 1023 atoms • The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023).
Select all that are true for both a voltaic cell and an electrolytic cell. Group of answer choices There must be a complete circuit to allow electrons to flow. The redox reaction is spontaneous. Oxidation happens at the anode. Reduction happens at the cathode. The redox reaction is non-spontaneous. g
Answer:
There must be a complete circuit to allow electrons to flow. Oxidation happens at the anode. Reduction happens at the cathode.
Explanation:
Select all that are true for both a voltaic cell and an electrolytic cell.
There must be a complete circuit to allow electrons to flow. YES. This is true for both cells.
The redox reaction is spontaneous. NO. This is only true for the voltaic cell.
Oxidation happens at the anode. YES. This is true for both cells.
Reduction happens at the cathode. YES. This is true for both cells.
The redox reaction is non-spontaneous. NO. This is only true for the electrolytic cell.
The statements that have been true for both voltaic and electrolytic cells are:
Option A: There must be a complete circuit to allow electrons to flow.
Option C: Oxidation happens at the anode.
Option D: Reduction happens at the cathode.
The electrolytic cells are the one that converts electrical energy into chemical energy. Voltaic cells convert chemical energy into electrical energy.
From the given options, the best-suited option for both electrolytic and voltaic cells are:
For any of the cells to perform the current flow, the circuit must be complete. Option A stating that there must be a complete circuit to allow electrons to flow is correct.The redox reaction has been a spontaneous reaction and results in the chemical conversion to form energy. Since the chemical energy has been converted into electrical energy, statement B has been true for only Voltic cells. Thus option B is incorrect.Oxidation is the reaction to the loss of electrons. In both cells, oxidation happens at the anode. Thus, option C is correct.Since oxidation takes place at anode, cathode acts as the reduction end in both the cells. Thus option D is correct.The redox reaction has been non-spontaneous only in the electrolytic cell. Thus option E is incorrect.The statements that have been true for both voltaic and electrolytic cells are, Option A, C, and D.
For more information about the electrolytic and voltaic cell, refer to the link:
https://brainly.com/question/1370699
Complete (predict the products, write correct formulas) and balance the following reaction:
Gaseous hydrochloric acid reacts with solid calcium hydroxide. Include states of matter and use subscripts as needed to receive full credit for a correct answer.
Explanation:
since hydrochloric acid is an acid and calcium hydroxide is a base, we know that this is an acid base reaction. The ions will then dissociatiate and bond with one another.
An alkane can show structural isomerism if it has at least ______ carbon atom
1)1
2)2
3)3
4)4
Spam = report and kick u
Answer:
2) 3 carbons
Explanation:
The alkane with one carbon is methane but it has no isomer.
The alkanes starting with propane only have isomers
Explanation:
An alkane can show structural isomerism if it has at least __4__ carbon atom
Calculate the mass of isoborneol in 2.5 mmol of isoborneol and the theoretical yield (in grams) of camphor from that amount of isoborneol
isoborneol = 154.25 g mol?1
Camphor, Molar mass = 152.23 g/mol
Answer:
[tex]m_{isoborneol }=0.39g\\\\m_{Camphor}=0.38g\\[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to infer that the reaction whereby isoborneol goes to camphor occurs in a 1:1 mole ratio, that is why the theoretical yield of the latter is also 2.5 mmol (0.0025 mol) but the masses can be calculated as follows:
[tex]m_{isoborneol }=0.0025mol*\frac{154.25g}{1mol} =0.39g\\\\m_{Camphor}=0.0025mol*\frac{152.23 g}{1mol} =0.38g\\[/tex]
Because of the fact this is a rearrangement reaction whereas the number of atoms is not significantly modified.
Regards!
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
Calculate the percent error in the atomic weight if the mass of a Zn electrode increased by 0.3681g and 6.514x10-3 moles of Zn was produced. You may assume the molar mass of elemental zinc is 65.38 g/mol.
a. -13.5%
b. 13.52%
c. -13.52%
d. 13.5%
Answer:
13.5%
Explanation:
To answer this you need to understand that percentage error can never be negative as we use absolute value in the equation
To get molar/atomic mass = mass/moles
=0.3681g/(6.514×10^-3)moles
=56.509g/moles
percentage error = (65.38-56.509)/65.38 ×100
=13.56% (this is what I'm getting without rounding off your question wasn't specific on how many d.p to use)
A 1 liter solution contains 0.370 M hypochlorous acid and 0.493 M sodium hypochlorite. Addition of 0.092 moles of barium hydroxide will: (Assume that the volume does not change upon the addition of barium hydroxide.)
In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.
The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:
The addition of barium hydroxide will raise the pH slightly because the buffer still working.
The initial moles of those species are:
Hypochlorous acid:
[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]
Sodium hypochlorite:
[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]
Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:
Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O
For a complete reaction of 0.092 moles of barium hydroxide are required:
[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]
As there are 0.370 moles, the moles of HClO after the reaction are:
0.370 moles - 0.184 moles = 0.186 moles of HClO will remain
As you still have hypochlorite and hypochlorous acid you still have a buffer.
Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.
Learn more about buffers in:
https://brainly.com/question/24302294
Prepare a flow sheet for the preparation of triphenylmethanol. Using your knowledge of the physical properties of the solvents, reactants, and products, show how the products can be purified. Indicate which layer should contain the product in the liquid/liquid extraction steps.
Answer:
See explanation and Image attached
Explanation:
The preparation of triphenylmethanol occurs as shown in the image attached to this answer.
The first step is the nucleophillic reaction of the phenyl magnesium bromide with the carbonyl group.
Reaction of the second molecule of phenyl magnesium bromide with the product yields triphenyl methoxide ion. Reaction with acid yields the triphenylmethanol product which is extracted into the organic phase.
The triphenylmethanol product can be purified by recrystallization.
Given the equation: 2C6H10(l) 17 O2(g) ---> 12 CO2(g) 10 H2O(g) MM( g/mol): 82 32 44 18 If 115 g of C6H10 reacts with 199 g of O2 and 49 g of H2O are formed, what is the percent yield of the reaction
Answer:
74%
Explanation:
Step 1: Write the balanced equation
2 C₆H₁₀(l) + 17 O₂(g) ⇒ 12 CO₂(g) + 10 H₂O(g)
Step 2: Determine the limiting reactant
The theoretical mass ratio (TMR) of C₆H₁₀ to O₂ is 164:544 = 0.301:1.
The experimental mass ratio (EMR) of C₆H₁₀ to O₂ is 115:199 = 0.578:1.
Since EMR > TMR, the limiting reactant is O₂.
Step 3: Calculate the theoretical yield of H₂O
The theoretical mass ratio of O₂ to H₂O 544:180.
199 g O₂ × 180 g H₂O/544 g O₂ = 65.8 g H₂O
Step 4: Calculate the percent yield of H₂O
%yield = (experimental yield/theoretical yield) × 100%
%yield = (49 g/65.8 g) × 100% = 74%
Answer:
Percentage yield of H₂O = 74.24%
Explanation:
The balanced equation for the reaction is given below:
2C₆H₁₀ + 17O₂ —> 12CO₂ + 10H₂O
Next, we shall determine the masses of C₆H₁₀ and O₂ that reacted and the mass of H₂O produced from the balanced equation. This is can be obtained as follow:
Molar mass of C₆H₁₀ = 82 g/mol
Mass of C₆H₁₀ from the balanced equation = 2 × 82 = 164 g
Molar mass of O₂ = 32 g/mol
Mass of O₂ from the balanced equation = 17 × 32 = 544 g
Molar mass of H₂O = 18 g/mol
Mass of H₂O from the balanced equation = 10 × 18 = 180 g
SUMMARY:
From the balanced equation above,
164 g of C₆H₁₀ reacted with 544 g of O₂ to produce 180 g of H₂O.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
164 g of C₆H₁₀ reacted with 544 g of O₂.
Therefore, 115 g of C₆H₁₀ will react to produce = (115 × 544)/164 = 381 g of O₂.
From the calculations made above, we can see that a higher mass (i.e 381 g) of O₂ than what was given (i.e 199 g) is needed to react with 115 g of C₆H₁₀.
Therefore, O₂ is the limiting reactant and C₆H₁₀ is the excess reactant.
Next, we shall determine the theoretical yield of H₂O. This can be obtained by using the limiting reactant as shown below:
From the balanced equation above,
544 g of O₂ reacted to produce 180 g of H₂O.
Therefore, 199 g of O₂ will react to produce = (199 × 180)/544 = 66 g of H₂O.
Thus, the theoretical yield of H₂O is 66 g.
Finally, we shall determine the percentage yield. This can be obtained as follow:
Actual yield of H₂O = 49 g
Theoretical yield of H₂O = 66 g
Percentage yield of H₂O =?
Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield of H₂O = 49/66 × 100
Percentage yield of H₂O = 74.24%
Determine the rate of reaction based on the data below:
75-
rate of reaction = y
hydrogen produced (cm)
х
y
25
50
75
100
125
time (seconds)
Answer:
75
Explanation:
is the answer for your question
What is represented by a straight line on a graph?
o the sum of the independent and dependent variables
O only the independent variable
O only the dependent variable
o the relationship between independent and dependent variable
1 2
3
4
5
Answer:
the relationship between independent and dependent variable
Explanation:
A straight line or linear graph is one of the ways to represent a given data. It shows the relationship between two given set of data; one called the independent variable is plotted on the x-axis (horizontal) while the other called the dependent variable is plotted on the y-axis (vertical).
The straighter the line is, the stronger the relationship between the two variables and vice versa. Hence, the straight line in the graph represents the relationship between independent and dependent variable.
What happens to the electropositive character of elements on moving from left to right along a period in a periodic table?
Answer:
On moving from left to right in a period the electropositive character decreases as the tendency to lose electrons decreases.
Explanation:
what is the complete ionic equation between the reaction of sodium carbonate and calcium hydroxide to form a precipitate
Answer:
CaCl2(aq) + Na2CO3(aq) → CaCO3(s) + 2NaCl(aq)
Reference:
H.W. Hanna and A. Dittmar; Laboratory Manual for General Chemistry, 4th ed.; Morton Publishing Company, Denver, Colorado
Could someone help me with this too? Much appreciated! I am a bit stuck.
Answer:
CO
Explanation:
why does D2O
have a higher boiling point than H2O
Answer:
deuterium is heavier isotope of hydrogen need
high weight of atom will lead to higher boiling point
A metal (C = 0.2158 cal/g· °C) is removed from a hot (350. °F) oven in which it had achieved thermal equilibrium. The metal is placed into 200. mL acetic acid. The temperature of the acid increases to 90.3 °C from 24.3 °C. What is the mass of the metal? (dacetic acid = 1.04 g/cm3; Cs, acetic acid = 2.055 J/g·°C) Group of answer choices 120. g 362 g 1452 g 347 g 281 g
Answer:
362g
Explanation:
heat lost by metal= heat gained by acetic acid
tfs are the same so you cando delta T
convert Cal/gc to J/gc
thectgod ig follow
Calculate the amount of water (in grams) that must be added to (a) 6.80 g of urea [(NH2)2CO] in the preparation of a 9.95 percent by mass solution: g (b) 29.3 g of MgBr2 in the preparation of a 1.70 percent mass solution: g
Explanation:
Amount of water required in each case:
(a)The mass% of the solution is:9.95
Mass of solute that is urea is 6.80 g
To determine the mass of solvent water use the formula:
[tex]mass percent=\frac{mass of solute}{mass of solution} x 100\\\\9.95=(6.80g/mass of solution )x100\\mass of solution =(6.80 /9.95)x100\\=68.3 g[/tex]
Hence the mass of solvent = mass of solution - the mass of solute
=68.3 g - 6.80g
=61.5 g
Hence, the answer is mass of solvent water required is 61.5 g.
(b) Given mass%=1.70
mass of solute MgBr2 = 29.3 g
The mass of solvent water required can be calculated as shown below:
[tex]mass percent=\frac{mass of solute}{mass of solution} x 100\\\\1.70=(29.3g/mass of solution )x100\\mass of solution =(29.3 g /1.70)x100\\=1720 g[/tex]
The mass of the solution is 1720 g.
Mass of solvent water = mass of solution - mass of solute
=1720 g - 29.3 g
=1690.7 g
Answer: The mass of water required is 1690.7 g.
How many nitrate ions are present in the following aqueous solution?
5.08 L of a solution containing 2.68 x 1021 formula units of lithium nitrate per liter.
When you have the number, determine its log (base 10) and enter that value with 3 decimal places
Answer:
22.1
Explanation:
Step 1: Calculate the number of formula units of lithium nitrate
A 5.08 L solution contains 2.68 × 10²¹ formula units per liter.
5.08 L × 2.68 × 10²¹ formula units/1 L = 1.36 × 10²² formula units
Step 2: Calculate the number of nitrate ions
Lithium nitrate dissociates completely in water according to the following equation.
LiNO₃(aq) ⇒ Li⁺(aq) + NO₃⁻(aq)
The molar ratio of LiNO₃ to NO₃⁻ is 1:1. The number of nitrate ions is 1/1 × 1.36 × 10²² = 1.36 × 10²².
Then,
log (1.36 × 10²²) = 22.1
The number of nitrate ions are present in the following aqueous solution is 13.6x10²¹, and log(base 10) value of this is 22.2.
What are strong electrolytes?
Those salts which are completely dissociate into their ions in the solution form will known as strong electrolyte.
Lithium nitrate is a strong electrolyte and it shows complete dissociation as:
LiNO₃ → Li⁺ + NO₃⁻
Given that,
1 liter of solution containing = 2.68 x 10²¹ formula unit
5.08 L of solution containing = 5.08 x 2.68 x 10²¹ = 13.6x10²¹ formula unit
So, number of nitrate ion in given solution = 13.6x10²¹ formula unit
Log(13.6x10²¹) = 22.1
Hence, required values are 13.6x10²¹ and 22.1.
To know more about strong electrolytes, visit the below link:
https://brainly.com/question/5547666
Which of the following is a reduction half-reaction?
Solution : An oxidation reduction (redox) reaction is a type of chemical reaction that involves a transfer of electrons between tow species an oxidaion reductin reaction is any chemical reaction in which the oxidation number of a molecule atom or ion changes by gaining or losing an electron
How are radioactive isotopes used to diagnose thyroid problems?
Answers
A.
Production of radioactive iodine by the thyroid is measured.
B.
Uptake of radioactive iodine by the thyroid gland is measured.
C.
Destruction of damaged cells by radioisotopes is measured.
D.
Absorption of gamma rays from ingested radioisotopes is measured.
Question
Answer:
A
Explanation:
uptakw of raduoactive iofine by the thyroid gland js measurd
Deduce the formula of calcium Phosphide.
Answer:
[tex]{ \sf{Ca _{3} P_{2} }}[/tex]
A mixture of methane and carbon dioxide gases contains methane at a partial pressure of 431 mm Hg and carbon dioxide at a
partial pressure of 504 mm Hg. What is the mole fraction of each gas in the mixture?
XCHA
Xc02
Answer:
XCH₄ = 0.461
XCO₂ = 0.539
Explanation:
Step 1: Given data
Partial pressure of methane (pCH₄): 431 mmHgPartial pressure of carbon dioxide (pCO₂): 504 mmHgStep 2: Calculate the total pressure in the container
We will sum both partial pressures.
P = pCH₄ + pCO₂
P = 431 mmHg + 504 mmHg = 935 mmHg
Step 3: Calculate the mole fraction of each gas
We will use the following expression.
Xi = pi / P
XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461
XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539
At elevated temperatures, hydrogen iodide may decompose to form hydrogen gas and iodine gas, as follows:
2HI(g) ⇌ H2 (g) + I2 (g)
In a particular experiment, the concentrations at equilibrium were measured to be [HI] = 0.85 mol/L, [I2] = 0.60 mol/L, and [H2] = 0.27 mol/L. What is Kc for the above reaction?
Explanation:
Since Kc is
[tex]k = \frac{(products)}{(reactants)} [/tex]
You can insert the Hydrogen and Iodine gas on top, and Hydrogen Iodide in the denominator.
Note: you can only include gases and aqueous species in an equilibrium expression, and all the species in this reaction are gaseous so you're good.
Inserting their molarity at equilibrium into their places, and you can solve. Don't forget to make the coefficient of HI turn into a power.
