Calculate the [H3O+] and the pH of a 0.140 M H3C6H5O7 solution.

Answer:

Characteristics of matter change due to chemical changes, not physical ones. Physical properties can be determined without changing the substance's chemical identity

Explanation:

The molarity of the solution is 1.0 m

The first step is to convert the mass of KCl to moles:

Number of moles of KCl = 74.5 g / 74.5 g/mol = 1.0 mol

Next, we need to calculate the mass of water in kilograms:

Mass of water = 1000 mL x 1 L/1000 mL x 1 kg/L = 1 kg

Now we can calculate the molality of the solution:

Molality = moles of solute / mass of solvent (in kg)

Molality = 1.0 mol / 1 kg = 1.0 m

Therefore, the molality of the solution is 1.0 m.

To know more about molarity click here:

brainly.com/question/8732513

#SPJ4

The amount of iodosalicylamide synthesized in the reaction performed by Edward by using 0.97 g of salicylamide will be about 2.87 grams.

Iodosalicylamide is synthesized by reacting salicylamide and sodium iodide in the presence of an oxidant. Iodosalicylamide is used as a reagent to detect the presence of oxidizing agents.

To find the mass of iodosalicylamide produced, we must first determine the limiting reagent for the reaction. The limiting reagent is the one that is consumed entirely, preventing the reaction from continuing even though the other reactants are present. The limiting reagent is the one that produces the least amount of product.

Moles of salicylamide:

moles = mass / molar mass = 0.97 g / 137.14 g/mol = 0.00708 moles

Moles of sodium iodide:

moles = mass / molar mass = 1.63 g / 149.89 g/mol = 0.0109 moles

Since iodosalicylamide is formed in a 1:1 ratio with the limiting reagent, sodium iodide, the limiting reagent is sodium iodide. Therefore, the theoretical yield of iodosalicylamide is the same as the moles of sodium iodide used.

Moles of iodosalicylamide = 0.0109 mol

Mass of iodosalicylamide = moles × molar mass = 0.0109 mol × 263.03 g/mol = 2.87 g

Therefore, the mass of iodosalicylamide that would be formed, assuming 100% yield, is 2.87 g, rounded to two decimal places.

Learn more about Iodosalicylamide here:

https://brainly.com/question/24215415

#SPJ11

The correct option is A. "more; less; greater; higher".

Explanation: Intermolecular forces refer to the forces of attraction and repulsion between molecules. These forces determine the physical properties of a substance, such as melting point, boiling point, and solubility.

A molecular substance with strong intermolecular forces means that the molecules are held tightly together, which requires more energy to overcome to break the bond.

The molecules at the surface of the liquid are held more tightly and vaporize less easily than molecules with weaker intermolecular forces. Molecules with weaker intermolecular forces are more likely to escape from the surface of the liquid and form the vapor phase.

Therefore, the amount of substance in the vapor phase will be less for molecules with strong intermolecular forces.

The vapor pressure is the pressure exerted by the vapor phase of a substance in equilibrium with its liquid or solid phase. The vapor pressure increases as the temperature increases or the amount of substance in the vapor phase increases.

Since the amount of substance in the vapor phase is less for molecules with strong intermolecular forces, the vapor pressure will be greater for molecules with weaker intermolecular forces.

to know more about force refer here

https://brainly.com/question/13191643#

#SPJ11

If a molecular substance has strong intermolecular forces, the molecules at the surface of the liquid are held less tightly and vaporize more easily than molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be greater than for molecules with weak intermolecular forces and the vapor pressure will therefore be higher.The correct answer is b.

Molecules are held together by the force of attraction between the atoms in them, but there are also forces between the molecules. These forces are called intermolecular forces. For example, the intermolecular forces that exist between water molecules are hydrogen bonding, while the intermolecular forces between propane molecules are van der Waals forces.

The boiling point of a liquid is determined by the strength of the intermolecular forces between the molecules that make up the liquid. The stronger the intermolecular forces, the higher the boiling point.

Learn more about intermolecular forces here:

brainly.com/question/9328418

#SMJ11

a.) The stressor that causes high concentrations of abscisic acid to travel from the roots to the shoot is drought.

An essential element of a plant's reaction to abiotic stress, particularly drought, is played by the hormone abscisic acid (ABA). Drought causes plants to create large amounts of ABA, which is then transferred from the roots to the shoot. Many physiological reactions result from this, including the closing of stomata, which lowers water loss through transpiration, and the activation of genes that encourage the manufacture of proteins that shield cells from dehydration-related cell damage. In addition, ABA causes inhibition of root development, which enables roots to sever deeper layers of soil in quest of water. In general, ABA production and transport play a key role in how plants manage drought stress and keep their water balance.

learn more about abscisic acid here:

https://brainly.com/question/13800529

#SPJ4

Answer:Superfatting is done for two reasons. The first is that extra oils add more moisturizing qualities to your soap (sometimes referred to as emollients). The second is that the common 5% superfatting allows you to a bit more leeway with your lye.

Explanation:What Are the Benefits of Using Excess Fat to Make Soap?

Written by Mustiin Soap

Handcrafted soaps with a little touch of essential oils and sweet, subtle fragrances can offer you a powerful bathing experience. While aroma enriches your mind, the excess fats, on the other hand, are the ones that enhance the overall impact on your skin. Whether made by a hot or cold process, adding fats is essential.

Adding excess fat or superfatting of soap benefits the soap’s moisturizing ability. Another significant benefit is its compatibility with the skin’s pH. As the soap has a pH of about 9.5, and the skin’s pH varies between 4.5-6. Superfatting is used to make the soap more skin-friendly.

The gas law that is employed to deflate a football is Boyle's law.

Boyle's law states that for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other. The equation for Boyle's law is:

[tex]P_{1} V_{1} /P_{2} V_{2}[/tex]

Where [tex]P_{1}[/tex] is the initial pressure of the gas, [tex]V_{1}[/tex]  is the initial volume of the gas,[tex]P_{2}[/tex] is the final pressure of the gas, and [tex]V_{2[/tex] is the final volume of the gas. In the case of deflating a football, the pressure of the air inside the football is reduced by letting some of the air out. The volume of the football decreases as the pressure decreases, and this is in accordance with Boyle's law.

Therefore, The Boyle's Law is used to deflate a football. It states that the volume of a gas is inversely proportional to its pressure, when the temperature is constant.

To know more about Boyle's law refer here :

https://brainly.com/question/1696010

#SPJ11

The chemical that the brain produce that makes people feel good when they exercise is dopamine and endorphins.

Endorphins are any of a group of peptide hormones found in the brain that act as neurotransmitters and have properties similar to morphine.

A neurotransmitter is any substance, such as acetylcholine or dopamine, responsible for sending nerve signals across a synapse between two neurons.

When you exercise, your body releases chemicals such as dopamine and endorphins in your brain that make you feel happy.

Learn more about endorphins at: https://brainly.com/question/28138527

#SPJ1

The electrons donated to the electron transport chain by NADH activate 4 proton pumps, while those donated by FADH2 activate 2 proton pumps. Electron transport is the process by which electrons are passed from one molecule, such as NADH or FADH2, to another molecule, such as oxygen.

The electrons donated to the electron transport chain by NADH activate 10 proton pumps, while those donated by FADH2 activate 6 proton pumps.

What is the electron transport chain?

The electron transport chain (ETC) is a chain of molecules that move electrons down a gradient from a higher energy state to a lower energy state, releasing energy along the way. In eukaryotic cells, the electron transport chain is located in the inner mitochondrial membrane. Electrons from NADH and FADH2 are passed down the chain in the electron transport chain, which eventually generates a proton gradient used to create ATP. In the electron transport chain, NADH and FADH2 donate electrons to a chain of electron carriers, which then pump protons from the mitochondrial matrix to the intermembrane space. The number of proton pumps activated by electrons donated by NADH and FADH2 differ. Electrons donated by NADH activate ten proton pumps, while electrons donated by FADH2 activate six proton pumps. The electron transport chain is responsible for the generation of the proton motive force used by ATP synthase to create ATP, which is the main source of energy for the cell.

To know more about electron transport chain, click the below link:

https://brainly.com/question/24372542

#SPJ11

In contrast to C3 plants, C4 plants have a different leaf structure and metabolic process. Carbon dioxide is first fixed in mesophyll cells of C4 plants.

where it is then transported to bundle sheath cells where it is broken down to release CO2 for the Calvin cycle. The key distinction between C4 and C3 plants is the division of carbon fixation and the Calvin cycle into various cells. C4 plants are more common in arid and semi-arid areas because they are more effective at photosynthesis in hot and dry conditions. In a typical C4 plant, the Calvin cycle and the first fixation of carbon dioxide take place in separate cells, the mesophyll cells, and the resulting four-carbon molecule is then transported to the bundle sheath cells in a C3 plant.

learn more about photosynthesis here:

https://brainly.com/question/29764662

#SPJ4

The compound that is a non-electrolyte when dissolved in water is CCl4.

When CCl4 dissolves in water, it does not break down into ions, and it does not conduct electricity.What is an electrolyte?An electrolyte is a compound that dissolves in water, and its solution conducts electricity due to the presence of ions. A compound must dissociate in water to produce ions to be considered an electrolyte. The ions can move freely through the solution, allowing for the conduction of electricity.There are three types of electrolytes: strong electrolytes, weak electrolytes, and nonelectrolytes. Strong electrolytes dissociate fully into ions in water and conduct electricity very efficiently. Weak electrolytes only partially dissociate, and they conduct electricity less efficiently than strong electrolytes.Nonelectrolytes are substances that do not dissolve in water or dissolve but do not dissociate into ions. Because they do not have ions, they do not conduct electricity. CCl4 is a nonelectrolyte, as it does not produce any ions when it dissolves in water.

For more such questions on Non-electrolyte

https://brainly.com/question/15291583

#SPJ11

Triacylglycerol is broken down by the enzyme lipase into fatty acids and glycerol. It is released by the pancreas and other digestive organs and is essential to the body's ability to digest and absorb fats.

Lipase is the enzyme that converts triacylglycerol into fatty acids and glycerol. The pancreas and other digestive organs release lipase, which is essential for the breakdown and absorption of fats in the body. Triacylglycerols are a kind of lipid that is frequently present in meals including meat, dairy goods, and oils. The triacylglycerol molecule's fatty acid ester linkages are hydrolyzed by lipase, releasing the molecules' separate fatty acids and glycerol. The body's cells can utilize these smaller parts for energy or store them as fat when they are absorbed into the circulation and delivered there. Other lipids, including phospholipids and cholesterol esters, are also broken down by lipase. and is essential for maintaining proper lipid metabolism and homeostasis in the body.

learn more about Triacylglycerol here:

https://brainly.com/question/29697122

#SPJ4

The substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile. The correct answer is b. primary: will.

Learn more about substitution nucleophilic bimolecular reaction: https://brainly.com/question/30631335

#SPJ11

When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.

Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.

This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.

To know more about atomic theories, here

brainly.com/question/28853813

#SPJ4

Saddam Hussein's overthrow in 2003 was one of the early results of regime transition in Iraq. Given that Hussein had been in charge of Iraq's government and society for more than 20 years,

this represented a dramatic change in the political landscape of the nation. Regime transition, however, was followed by a turbulent era of political unrest and sectarian warfare. Broader geopolitical repercussions of the US-led invasion of Iraq and subsequent government change included strained ties with other nations in the region, a rise in anti-American sentiment, and the creation of new extremist organizations like ISIS. The long-term implications of the Iraqi government transition are still being discussed and examined, although is clear that the initial outcome was one of significant.

learn more about Iraq  here:

https://brainly.com/question/29605758

#SPJ4

The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.

When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.

In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance.  Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.

Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than  2-bromopropane and 2-bromopropane is the least reactive.

To know more about alkyl halides, refer here:

https://brainly.com/question/17063582#

#SPJ11

Each reaction's Lewis acid and Lewis base are as follows:

AlCl3 is the Lewis acid in the reaction, whereas Cl- is the Lewis base. F- is the Lewis base and BF3 is the Lewis acid in the reaction Cl- + AlCl3 --> AlCl4- BF3 + F- --> BF4-

The Lewis base in this reaction is NH3, and the Lewis acid is H+. NH3 + H+ --> NH4+

Explanation: A Lewis acid acts as an electron pair acceptor in a Lewis acid-base reaction, whereas a Lewis base acts as an electron pair donor. In the initial reaction, Cl- provides AlCl3 with a pair of electrons, which AlCl3 accepts to produce AlCl4-. As a result, AlCl3 is the Lewis acid and Cl- is the Lewis base. In the subsequent response, F- provides two pairs. BF3 takes the electrons and transforms them into BF4-. Hence, the Lewis bases are F- and BF3, respectively. In the third reaction, H+ absorbs a pair of electrons from NH3 and forms NH4+ as a result. As a result, the Lewis bases are NH3 and H+.

learn more about Lewis acid  here:

https://brainly.com/question/15570523

#SPJ4

Titration is the best investigation to identify an unknown liquid as acidic, basic, or neutral by measuring its pH level.

A student finds an unlabeled bottle of liquid under his kitchen sink. Titration is the investigation that would best help him identify the unknown liquid as acidic, basic, or neutral.

Titration is the chemical method used to find the amount of acid or base in a given substance. This method is a laboratory technique used to measure the concentration of a known solution (the titrant) with a solution of an unknown concentration (the analyte).

The unknown solution is slowly added to the known solution until it reacts completely, allowing us to calculate the concentration of the unknown solution. Titration may be used to identify an unknown solution as acidic, neutral, or basic by determining its pH level. It's a highly precise technique that's often used in analytical chemistry laboratories to measure the concentration of chemicals.

Learn more about liquid: https://brainly.com/question/1313076

#SPJ11

Yes, this is a good idea as it is an efficient use of resources. Advantages include reduced costs of purchasing new drying agents and decreased wastage of materials. Disadvantages could include loss of quality of the recycled drying agent, and extra energy used to dry out the salt.

Drying agents can be collected after an experiment and the hydrated salt heated in an oven to drive off the water. The recycled drying agent can then be used again for another experiment.

What are drying agents?

In order to absorb water vapor, drying agents are added to organic solvents to make them anhydrous.

What are the advantages and disadvantages of recycling drying agents?

The recycling of drying agents has a few advantages and disadvantages:

Advantages of recycling drying agents:

Cost-effective: If the solvent used is expensive, recycling drying agents can save money. A drying agent like anhydrous magnesium sulfate is a good example since it can be reused numerous times. No pollution: The disposal of waste is reduced. If every time a new drying agent is employed, it must be disposed of properly, which is both time-consuming and costly. The amount of waste that has to be disposed of is reduced if the same drying agent is used repeatedly. Recyclable waste: Used drying agents are recyclable. It's just a matter of heating the salt to remove any water and returning it to the drying agent stock. This procedure helps to prevent waste.

Disadvantages of recycling drying agents:

Contamination: Even though the recycled drying agent is supposed to be pure, it may still contain minor quantities of impurities, which might result in contamination of the final product. Impurities: If the drying agent is not cleaned properly, impurities will be transferred from one experiment to the next. Excessive heating: Anhydrous drying agents should not be heated excessively because they may lose their effectiveness. If the salt is heated for too long, the surface area exposed to moisture will be decreased. Therefore, while recycling drying agents is a good idea, some precautions should be taken to ensure that the drying agent is pure and effective.

For more details follow the link: https://brainly.com/question/30712002

#SPJ11

The partial pressure of oxygen in the atmosphere is 0.210 atm.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

The air in the atmosphere is composed of many different gases. The most common of these gases is nitrogen, which makes up 78% of the atmosphere.

Oxygen makes up 21% of the atmosphere, and the other gases make up 1%. The atmospheric pressure is the pressure created by the weight of the gases in the atmosphere.

The atmospheric pressure is measured in units of atmospheres (atm). The atmospheric pressure at sea level is usually around 1 atm, which is equal to 760 mm Hg and 101.325 torr.

This is the same pressure that you feel when you take a breath of air.

The partial pressure of a gas is the amount of pressure exerted by that gas alone, as opposed to the total atmospheric pressure. The partial pressure of oxygen in the atmosphere is 0.210 atm.

This means that, out of the total atmospheric pressure of 1 atm, 0.210 atm of the pressure is from oxygen.

Partial pressure is often measured in units of mm Hg or torr. To convert from atm to mm Hg, the value is multiplied by 760.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

to know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.

Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.

When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.

The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.

Learn more about Relative refractory period here:

https://brainly.com/question/30460363

#SPJ11

The correct answer is B) Urea. Urea is a waste product of protein metabolism, and is released from the body through sweat, where the ammonia and other waste products form urea.

Lysozymes are enzymes that are naturally produced in most living organisms. They are responsible for helping to break down peptidoglycan, a substance found in the cell walls of various bacteria. This helps to prevent bacterial growth and spread, as well as helping to keep the cells intact. Lysozymes are also known to act as an antimicrobial agent, helping to destroy the cell walls of some types of bacteria.

Sebum is an oily substance produced by the sebaceous glands of the skin. The sebaceous gland is located in the hair follicles and it is responsible for secreting the sebum. Sebum production is regulated by hormones and usually occurs when the body needs more moisture (such as during puberty). Sebum can act as a barrier to protect the skin and prevent it from drying out. It helps to keep the skin hydrated, soft and supple. In addition, it helps to reduce bacterial buildup on skin. Sebum is also responsible for giving skin its natural glow.

To know more about Lysozymes, visit:

https://brainly.com/question/29829618

#SPJ1

A sense strand is the mRNA strand that is translated from a DNA strand with a same nucleotide sequence. the codons have specific functions when the mRNA sequence is translated into a protein.

The DNA sequence serves as a template for the synthesis of a complementary mRNA molecule during transcription. The nucleotide arrangement of the DNA template strand dictates the sequencing of the mRNA. The mRNA sequence is not identical to the template DNA strand; rather, it is complementary to it. RNA polymerase, which builds the mRNA molecule on the DNA template strand, adds complementary RNA nucleotides to the lengthening mRNA chain. Since RNA nucleotides have uracil (U) as a base instead of thymine (T), the mRNA sequence will have the same nucleotide sequence as the DNA template strand. The mRNA sequence is read in groups of three nucleotides called codons, and the codons have specific functions when the mRNA sequence is translated into a protein.

learn more about nucleotide here:

https://brainly.com/question/16308848

#SPJ4

Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.

With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).

learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The volume of the ammonia that can be produced from the reaction that has been written is;  155 * 10^7 L

We know that;

PV = nRT

For the hydrogen;

n = PV/RT

n = 155 * 4.0 x 10^7 /0.082 * 776

n = 620 * 10^7/63.63

n = 9.7 * 10^7 moles

Now the reaction equation is;

N₂(g) + 3H₂(g) → 2NH3(g)

3 moles of hydrogen  produced 2 moles of ammonia

9.7 * 10^7 moles will produce  9.7 * 10^7 moles * 2 moles/ 3 moles

x = 6.5 * 10^7 moles

For the volume of the ammonia;

V = nRT/P

V =  6.5 * 10^7 moles * 0.082 * 293.6/1.007

V = 155 * 10^7 L

Learn more about ammonia:https://brainly.com/question/14672082

#SPJ1

The standard enthalpy of formation of TiCl₄ (I) is -750kJ mol ⁻¹. The correct answer for the given reaction of Titanium tetrachloride is thus option C.

The standard enthalpy of formation (ΔH°f) is the modification in enthalpy that happens when one mole of a substance is formed from its component elements in their standard states under standard conditions of temperature and pressure (298 K and 1 atm pressure).

To determine the standard enthalpy of formation for TiCl₄ (I), we need to use Hess's law and combine the given reactions in a way that cancels out all the other reactants and leaves only  TiCl₄ (I) as the product. We can achieve this by reversing the first equation and adding it to the second and third equations:

Ti(s) + 2Cl₂(g) + 2CO₂(g) →  TiCl₄ (l) + 2CO₂(g) + 2Cl₂(g) ∆H = +232 kJ mol⁻¹

Ti(s) + O₂(g) → TiO₂(s) = −912 kJ mol⁻¹

C(s) + O₂(g) → CO₂(g) = −394 kJ mol⁻¹

Now, we can cancel out the CO₂(g) and Cl₂(g) on both sides and simplify the equation to:

Ti(s) + 2Cl₂(g) + C(s) →  TiCl₄ (I)  ∆H = +232 kJ mol⁻¹ - 2(-394 kJ mol⁻¹) - 912 kJ mol⁻¹ = -750 kJ mol⁻¹

Therefore, the correct value for the standard enthalpy of formation for TiCl₄ (I) is -750 kJ mol⁻¹.

To find out more about standard enthalpy of formation, visit:

https://brainly.com/question/30264187

#SPJ1

Answer: carbon and hydrogen 

Explanation:

Hydrocarbons are a group of chemical organic compounds composed of carbon and hydrogen 

Answer:

The balanced chemical equation for the reaction is:

C + 2H2 → CH4

From the equation, we can see that 1 mole of carbon reacts with 2 moles of hydrogen to produce 1 mole of methane. Therefore, to produce 7.8 moles of methane, we would need:

1 mole of carbon = 1 mole of CH4 / 2 moles of H2 = 1/2 mole of CH4

7.8 moles of CH4 = 7.8 × (1/2) moles of C = 3.9 moles of C

Now, we can use the molar mass of carbon to convert moles to grams:

Atomic mass of carbon (C) = 12.01 g/mol

3.9 moles of C × 12.01 g/mol = 46.8 g of C

Therefore, we need 46.8 grams of carbon to produce 7.8 moles of methane (CH4). Rounded to the nearest tenth, the answer is 46.8 grams.

At 31.52° Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm . This is given by ideal gas law.

An ideal gas is a theoretical gas composed of many randomly moving point particles that do not interact with one another. The ideal gas concept is useful because it obeys the ideal gas law, which is a simplified equation of state, and is amenable to statistical mechanics analysis. The requirement of zero interaction is frequently relaxed if the interaction is perfectly elastic or regarded as point-like collisions, for example. When intermolecular forces and molecular size become important, the ideal gas model tends to fail at lower temperatures or higher pressures. It also fails for most heavy gases, including many refrigerants,[2] as well as gases with strong intermolecular forces, most notably water vapor. At high pressures, the volume of a real gas is frequently much larger than that of a pure gas.

using the formula

P × M = d × R × T

Where P = pressure = 6.43 atm

m= molar mass = 40 g

d = density = 10.3 g/L

T = temperature

R = 0.082057 L atm K⁻¹ mol⁻¹

solving for T ,

T = 31.52°C

To know more about ideal gas , visit ;

brainly.com/question/28257995

#SPJ1

Answer:

Boron,silicon,germanium,arsenic,antimony,tellurium, polonium, astatine.