C is not less than 0

KE = (0.5) m v²

given that : v = speed of the bottle in each case = 4 m/s when m = 0.125 kg

KE = (0.5) m v² = (0.5) (0.125) (4)² = 1 J

when m = 0.250 kg KE = (0.5) m v² = (0.5) (0.250) (4)² = 2 J

when m = 0.375 kg KE = (0.5) m v² = (0.5) (0.375) (4)² = 3 J

when m = 0.0.500 kg KE = (0.5) m v² = (0.5) (0.500) (4)² = 4 J

Answer:

The time required is 0.45 s.

Explanation:

Height, h = 1 m

initial velocity, u = m/s

Let the time is t.

Use second equation of motion

[tex]h = u t + 0.5 at^2\\\\1 = 0 +0.5 \times 9.8 \times t^2\\\\t = 0.45 s[/tex]

Answer:

Increasing

Explanation:

I Hope it Helps

Answer:

This may refer to a situation like:

"one person pushes a box, if there is equal and opposite reaction why the box moves and the person does not?"

Remember the second Newton's law:

F = m*a

suppose that the mass of the person is 3 times the mass of the box.

So, if the box has a mass M, the person will have a mass 3*M

Then the Newton's equation for the box when the person pushes with a force F is:

F = M*a

solving for the acceleration, we get:

F/M = a

While the person is also pushed by the box with a force with the same magnitude, then the equation for the person is:

F = (3*M)*a'

Solving for the acceleration, we get:

F/(3M) = a'

Now we can compare the acceleration of the box (F/M) with the acceleration of the person (F/3M).

Is easy to see that the acceleration of the box is 3 times the acceleration of the person.

So regardless of the fact that both the box and the person experience a force with the same magnitude, the box will move more due to this force.

This is why in situations like this, the forces do not seem balanced.

Answer:

 ΔR = 5 s

Explanation:

The absolute uncertainty or error in an expression is

       ΔR = | [tex]\frac{dR}{dB}[/tex] | ΔB + | [tex]\frac{dR}{dA}[/tex] | ΔA

the absolute value guarantees to take the unfavorable case, that is, the maximum error.

We look for the derivatives

       [tex]\frac{dR}{dB}[/tex] = 1

       [tex]\frac{dR}{dA}[/tex] = -1

we substitute

       ΔR = 1 ΔB + 1 ΔA

of the data

       ΔB = 3 s

       ΔA = 2 s

       ΔR = 3 + 2

       ΔR = 5 s

Answer:

The diagram assigned B

explanation:

Check the direction of the two vectors, their resultant must be in the same direction.

Answer:

Explanation:

Use the kinematic equation.

This equation can be derived from [tex]f=ma[/tex], but we can just memorize, or look them up when needed as it saves us time.

Now we can plug our measurements into each variable to solve for acceleration.

Subtract 8m/s from both sides.

Divide by 5 seconds. Left with acceleration in terms of [tex]\frac{m}{s^2}[/tex]

Answer:

I think it's option D

Explanation:

I think it's option D but not so sure

Explanation:

→ Volume of cone = πr² × h/3

Here,

→ Volume of cone = π(13)² × 27/3 cm³

→ Volume of cone = 169π × 9 cm³

→ Volume of cone = 1521π cm³

→ Volume of cone = 1521 × 22/7 cm³

→ Volume of cone = 33462/7 cm³

→ Volume of cone = 4780.28 cm³

Answer:

4,778.4 is correct

Explanation:

Answer:

c

Explanation:

The solubility of the sample will decrease

Answer:

a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.

Explanation:

Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through.  In more rigid medium sounds velocity will be faster.

Answer:

Use the formula ∆H = m x s x ∆T to solve.

Explanation:

Once you have m, the mass of your reactants, s, the specific heat of your product, and ∆T, the temperature change from your reaction, you are prepared to find the enthalpy of reaction. Simply plug your values into the formula ∆H = m x s x ∆T and multiply to solve.

Answer:  

GIVEN:

v₀=0ms⁻¹

a= 8.1ms⁻²

t= 19.4s

REQUIRE:

d=?

CALCULATUION:

as we know,

d=v₀t+1/2at²

by putting values

d=0ms⁻¹×19.4s+1/2×8.1ms⁻²×(19.4s)²

d=0m+1/2×8.1ms⁻²×376.36s²

d=1/2×3048.516m

d=1524.258m

d≈1524m

Answer:

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Explanation:

Asumiendo que la varilla de cobre experimenta deformaciones muy pequeñas y que las deformaciones no longitudinales son despreciables con respecto a las deformaciones longitudinales, la deformación longitudinal de la varilla se estima mediante la siguiente fórmula:

[tex]l_{f} = l_{o}\cdot [1+\alpha \cdot (T_{f}-T_{o})][/tex] (1)

Donde:

[tex]l_{o}[/tex] - Longitud inicial de la varilla, en metros.

[tex]\alpha[/tex] - Coeficiente de dilatación, en [tex]^{\circ}C^{-1}[/tex].

[tex]T_{o}[/tex] - Temperatura inicial de la varilla, en grados Celsius.

[tex]T_{f}[/tex] - Temperatura final de la varilla, en grados Celsius.

Si sabemos que [tex]l_{o} = 1.20\,m[/tex], [tex]\alpha = 1.4\times 10^{-5}\,^{\circ}C^{-1}[/tex], [tex]T_{o} = 18\,^{\circ}C[/tex] y [tex]T_{f} = 100\,^{\circ}C[/tex], entonces la longitud final de la varilla es:

[tex]l_{f} = (1.20\,m)\cdot \left[1 + \left(1.4\times 10^{-5}\,^{\circ}C^{-1}\right)\cdot (100\,^{\circ}C-18\,^{\circ}C)\right][/tex]

[tex]l_{f} = 1.201\,m[/tex]

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Answer:

1.67 amperes

Explanation:

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

[tex] V = IR [/tex]  ......equation 1

Where;

Making I the subject of formula, we have;

[tex] I = \frac {V}{R} [/tex]  .....equation 2

Given the following data;

To find the current flowing through the battery, we would use eqn 2;

[tex] I = \frac {10}{6} [/tex]  

Current, I = 1.67 amperes

Answer:

ΔP = 1875 Pa,   P₂ = P₁ - 1875

Explanation:

Let's use Bernoulli's equation, with the subscript 1 for the widest Mars and the subscript 2 for the narrowest part, suppose that the pipe is horizontal

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

          P₁ -P₂ = ½ ρ (v₂² - v₁²)

suppose the fluid is water

          P₁ - P₂ = ½ 1000 (2² - 0.5²)

         ΔP = 1875 Pa

this is the pressure difference between the two sections

the pressure in the narrowest section is

           P₂ = P₁ - 1875

Answer:

see the explanation below

Explanation:

Momentum is a product of the mass of a particle and its velocity.

and also, momentum is a vector quantity; i.e. it has both magnitude and direction.

Now a plane in the air has both magnitude and velocity

When the plane lands the velocity will amount to zero although the mass is still very much intact

Now the mass* zero velocity= zero

Hence when a plane lands the momentum is zero

Answer:

Explanation:

Acceleration is equal to the change in velocity over the change in time, or

[tex]a=\frac{v_f-v_i}{t}[/tex] where the change in velocity is final velocity minus initial velocity. Filling in:

[tex]3.0=\frac{v_f-(-3.0)}{6.0}[/tex] Note that I made the backward velocity negative so the forward velocity in our answer will be positive.

Simplifying that gives us:

[tex]3.0=\frac{v_f+3.0}{6.0}[/tex] and then isolating the final velocity, our unknown:

3.0(6.0) = v + 3.0 and

3.0(6.0) - 3.0 = v and

18 - 3.0 = v so

15 m/s = v and because this answer is positive, that means that the car is no longer rolling backwards (which was negative) but is now moving forward.

At the ball's highest point, it has no vertical velocity, so the 6 m/s is purely horizontal. A projectile's horizontal velocity does not change, which means the ball was initially thrown with speed v such that

v cos(53°) = 6 m/s   ==>   v = (6 m/s) sec(53°) ≈ 9.97 m/s

The player shoots the ball from a height of 2.0 m, so that the ball's horizontal and vertical positions, respectively x and y, at time t are

x = (9.97 m/s) cos(53°) t = (6 m/s) t

y = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

Find the times t for which the ball reaches a height of 3.00 m:

3.00 m = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

==>   t ≈ 0.137 s   or   t ≈ 1.49 s

The second time is the one we care about, because it's the one for which the ball would be falling into the basket.

Now find the distance x traveled by the ball after this time:

x = (6 m/s) (1.49 s) ≈ 8.93 m

Answer:

2min

Explanation:

i think it will be clear from photo

Answer: The formula for current is charge/time

so here we have to change subject so we are asked to look for time  

Explanation: so it would be T=Q/I

T=4/2

T=2s

hope this helpss

Answer:

Densities increase down the group

MP and BP decrease down the group

Softness increased going down the group

Speed of reacting increases going down the group

Answer:

The position is 8.18cm from the mirror.

Nature is b=virtual

Size is 1.82cm

Explanation:

Note that for a convex mirror, the image distance and the focal length are negative;

Given

Object height H0 = 4cm

object distance u = 18cm

Radius of curvature R = 30cm

Since f = R/2

f = 30/2

f = -15cm

Recall that:

[tex]\frac{1}{f} =\frac{1}{u}+ \frac{1}{v}\\\frac{1}{-15}=\frac{1}{18}+\frac{1}{v} \\\frac{1}{v} =\frac{1}{-15} -\frac{1}{18}\\ \frac{1}{v} = \frac{-18-15}{270}\\\frac{1}{v} = \frac{-33}{270}\\v=\frac{-270}{33}\\v=-8.18cm[/tex]

Since the image distance is negative, this shows that the image is a virtual image.

To get the size:

[tex]\frac{H_1}{H_0}=\frac{v}{u}\\\frac{H_1}{4}=\frac{8.18}{18}\\18H_i=32.72\\H_i=\frac{32.72}{18}\\H_i= 1.82cm[/tex]

Answer:

Explanation:

We need to find the x-components of each of these vectors and then add them together, then we need to find the y-components of these vectors and then add them together. Let's get to that point first. That's hard enough for step 1, dontcha think?

The x-components are found by multiplying the magnitude of the vectors by the cosine of their respective angles, while the y components are found by multiplying the magnitude of the vectors by the sine of their respective angles.

Let's do the x-components for all the vectors first, so we get the x-component of the resultant vector:

[tex]F_{1x}=12 cos0[/tex] and

[tex]F_{1x}=12[/tex]

[tex]F_{2x}=9cos90[/tex] and

[tex]F_{2x}=0[/tex]

[tex]F_{3x}=15 cos126.87[/tex] and

[tex]F_{3x}=-9.0[/tex]  (the angle of 126.87 is found by subtracting the 53.13 from 180, since angles are to be measured from the positive axis in a counterclockwise fashion).

That means that the x-component of the resultant vector, R, is 3.0

Now for the y-components:

[tex]F_{1y}=12sin0[/tex] and

[tex]F_{1y}=0[/tex]

[tex]F_{2y}=9sin90[/tex] and

[tex]F_{2y}=9[/tex]

[tex]F_{3y}=15sin126.87[/tex] and

[tex]F_{3y}=12[/tex]

That means that the y-component of the resultant vector, R, is 21.

Put them together in this way to find the resultant magnitude:

[tex]R_{mag}=\sqrt{(3.0)^2+(21)^2}[/tex] which gives us

[tex]R_{mag}=21[/tex] and now for the angle. Since both the x and y components of the resultant vector are positive, our angle will be where the x and y values are both positive in the x/y coordinate plane, which is Q1.

The angle, then:

[tex]tan^{-1}(\frac{21}{3.0})=82[/tex] degrees, and since we are QI, we do not add anything to this angle to maintain its accuracy.

To sum up: The resultant vector has a magnitude of 21 N at 82°

Explanation:

125 is your answer........

Answer:

cant see picture

Explanation:

Answer:

please add picture so i can help you

Explanation: