Answer: Mirror image rule
Explanation:
It should be noted that the contract formation defenses are fraud, illegality, incapacity, unconscionability, duress and statute of Frauds.
The mirror image rule is not among the defense to the formation of w contract. It implies that an offer should be accepted with no changes made to the offer.
Brunette Company is contemplating investing in a new piece of manufacturing machinery. The amount to be invested is $180,000. The present value of the future cash flows generated by the project is $163,000. Should they invest in this project?
Answer:
No, as the net present value comes in negative
Explanation:
As we know that
Net present value = Present value of cash inflows - Initial investment
where,
Present value os $163,000
And, the initial investment is $180,000
Now placing these values to the above formula
So, the net present value is
= $163,000 - $180,000
= -$17,000
Therefore the company should not accept the project as net present value is in negative that is -$17,000
The central problem in product-oriented layout planning is?
Answer: The minimizing the imbalance in the workloads among workstations.
Explanation:
Workspace can inspire informal and productive encounters if it balances what three physical and social aspects.
air pollution causes capital to wear out more rapidly, doubling the rate of depreciation. How would this affect economic growth?
Answer:
The economic growth will be lower.
Explanation:
The rise in pollution and the doubling of the rate of depreciation will affect economic growth adversely. However, rapid wear and tear of capital will cost the person and it will reduce the purchasing power. Thus, lower purchasing power will result in lower economic growth. Moreover, pollution creates three main problems that are reduced labor productivity, rise in health problems, and loss of crop yield. So the reduction in all these factors will also slow down economic growth.
A gift-wrapping business is staffed by Kaitlyn, Rob, Sam, Susan and Sarah. The production by each of the staff members for an average eight-hour work day is as follows:
Assume that the standard or normal productivity in the organization is 10 minutes per package. What is Kaitlyn's efficiency?
Kaitlyn Rob Sam Susan Sarah
72 packages 55 packages 52 packages 52 packages 48 packages
a. 0.75 (75%)
b. 1.50(150%)
c. 9.0 packages per hour
d. 1.50 packages per hour
e. 9.0 minutes per package
Answer:
b. 1.50(150%)
Explanation:
Given that, the standard time per packages is 10 minutes
Then, the total time taken in eight hour shift is 8 * 60 = 480 minutes
The standard output = Total time taken / Standard time = 480/10 = 48 packages
Therefore, the efficiency of Kaitlyn = Kaitlyn's Output / Standard output
=72 / 48
= 1.5
Hence, the answer is 150% or 1.5
Fed is open to changing bond policy Fed policymakers signaled for the first time that they could increase or decrease stimulation of the economy in the future, but not now. Source: Los Angeles Times, May 1, 2013 What are the ripple effects and time lags that the Fed must consider in deciding when to increase or decrease stimulation of the economy?
Answer:
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
Explanation:
When trying to stimulate the economy either by increasing or decreasing, policymakers have to take into consideration how it would effect interest rate, amount of money available in the economy, loans that would be acquired by banks and the behavior of interest rate.
Interest rate can be impacted quickly even though the period of time it would take for such action to have a reflection on what quantity of money is available in the economy. Then also a period of 2 years would be taken for this action to take effect on inflation.
Therefore
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
The marketing department of Jessi Corporation has submitted the following sales forecast for the upcoming fiscal year (all sales are on account):
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter
Budgeted unit
sales 12,200 13,200 15,200 14,200
The selling price of the company’s product is $21 per unit. Management expects to collect 65% of sales in the quarter in which the sales are made, 30% in the following quarter, and 5% of sales are expected to be uncollectible. The beginning balance of accounts receivable, all of which is expected to be collected in the first quarter, is $72,600.
The company expects to start the first quarter with 2,440 units in finished goods inventory. Management desires an ending finished goods inventory in each quarter equal to 20% of the next quarter’s budgeted sales. The desired ending finished goods inventory for the fourth quarter is 2,640 units.
Required
1-A. Complete the company's sales budget.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Units Sales
Selling Price Per Unit
Total Sales
1-B. Complete the schedule of expected cash collections.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Beginning Accts Receivable
1st Quarter Sales
2nd Quarter Sales
3rd Quarter Sales
4th Quarter Sales
Total Cash Collections
2. Prepare the company’s production budget for the upcoming fiscal year.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Unit Sales
Total Needs
Required Production in Units
Answer:
1-A. Sales budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Price per unit $21 $21 $21 $21 $21
Total sales $256,200 $277,200 $319,200 $298,200 $1,150,800
1-B. Cash collections budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Collections from $72,600 $76,860 $83,160 $95,760 $72,600
previous quarter
Collections from $166,530 $180,180 $207,480 $193,830 $1,003,900
current quarter
Total $239,130 $257,040 $290,640 $289,690 $1,076,500
2. Productions budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Planned ending 2,640 3,040 2,840 2,640 2,640
inventory
Total production 14,840 16,240 18,040 16,840 65,960
required
- Beginning 2,440 2,640 3,040 2,840 2,440
inventory
Units to be 12,400 13,600 15,000 14,000 63,520
produced
Answer:
sells budget
Explanation:
DPMO stands for:______
a) Defects Per Million Opportunity
b) Defectives Per Million Opportunity
c) Data Per Million Opportunity
d) all of the above
e) none of the above
Answer:
a) Defects Per Million Opportunity
Explanation:
DPMO is an acronym which stands for Defects Per Million Opportunity. Defects per Million Opportunities refers to a standard metric which represents the number of defects in a process per one million opportunities.
In order to calculate the DPMO, we divide the number of defects by the number of opportunities and then multiply by a million.
Additionally, when a quality characteristics or properties do not tally with a standard or specifications it is generally referred to as a defect.
Hence, in a six sigma approach to quality or level of performance, the defects per million opportunities (DPMO) is 3.4.
Identify factors that could prevent an older, established company from effecting an enterprise-wide, customer-centric culture.
Answer:
A more established company may find it difficult to implement an enterprise-wide, customer-centric culture due to the following reasons:
A) Existence of a Multi-Product Business Model
A business entity that is well established with a lot of years under its belt will find it a tough challenge to shift from a product-oriented business model to a customer-oriented business model.
To be product-focused simply means that that a company has woven its organisational structure around products. For examples, a company that is into the gaming business may have teams for their Sports Betting Section, another for their online gaming section, game hardware section, gaming apps section etc.
First, for these various teams, their performance metric will largely depend on how functionally efficient their products are.
Second, techy or geeky staff are seldom efficient when it comes to emotional intelligence - a key requirement for being customer efficient.
One way to handle this is to ensure that there is a central Customer Relationship Management team that oversees the customers for each product.
B) Organisational Inflexibility
As direct to the point as it sounds, getting market intelligence for with the intention to use them for decision making is challenging. What is tougher is the ability to implement the insights from such intelligence to effect a turn around in the way customers perceive and respond to a company's offerings.
The ability to quickly take gather market intel, agree on a strategic direction based on same and execute can be referred to organisational agility.
The more bureaucratic and hierarchical an organisation is (this, by the way, characterises older and more established business systems) the less agile it is likely to be.
Cheers!
Mountain Ski Corp. was set up to take large risks and is willing to take the greatest risk possible. Lakeway Train Co. is more typical of the average corporation and is risk-averse.
Projects Returns: Expected Value Standard Deviation
A $ 310,000 $ 173,000
B 676,000 413,000
C 163,000 120,000
D 134,000 101,000
a-1. Compute the coefficients of variation. (Round your answers to 3 decimal places.)
a-2. Which of the following four projects should Mountain Ski Corp.
A. Project B
B. Project A
C. Project C
D. Project D
Answer:
B. Project A
Explanation:
Coefficient of variation=standard deviation/expected return value
Project A:
Coefficient of variation=$173,000/$310,000= 0.558
Project B:
Coefficient of variation=$413,000/$676,000= 0.611
Project C:
Coefficient of variation=$120,000/$163,000=0.736
Project D:
Coefficient of variation=$101,000/$134,000=0.754
The Project A has the lowest rate of risk per unit of return, hence, it is the preferred choice of investment
What was the ratio of per capita income in each of the following countries to that in the United States in the year 2010:
a. Ethiopia
b. Mexico
c. India
d. Japan
Answer:
For Countries (per capita) United States of America (per capita)
Ethiopia:
$380 $48,468
Mexico:
$9,271 $48,468
India:
$1,358 $48,468
Japan:
$44,508 $48,468
Explanation:
Ratio per Capita also known as Gross Domestic Product per Capita (GDP Capita) is the monetary measure of the market value of all the final goods and services produced in a specific time period within the country in view. It is useful for comparing national economies of different countries on the international market.
Explain how to use the decision trees and Monte Carlo analysis for quantifying risk. Give an example of how you would use each technique on an IT project.
Answer:
The answer is below
Explanation:
Decision Tree Analysis is a form or type of quantitative risk assessment tool and techniques that involves a diagram that indicates the significances of choosing one or other alternatives.
In other words, the purpose of the tool is to assist you to select between several courses of action.
For example, lines are drawn towards the right for each possible solution, and then the solution is written along the line. Then evaluation of each alternative can be easily considered.
On the other hand, Monte Carlo Analysis is also a form or type of quantitative risk assessment tools and techniques that utilizes optimistic, most probable, and cynical estimates to infer the total project cost and project completion dates.
For example, an estimate of the probability of completing a project at a cost of $100M can be carried out using Monte Carlo Analysis
x
Suppose you are building a scatter plot in Excel for a large amount of data. After selecting the scatter plot option, how do you enter the data into your scatter plot?
a. By manually typing each data point into the scatter plot
b. By using the Quick Styles button under the Chart menu
c. By using the Select Data button and the Select Data Source option
Answer:
c. By using the Select Data button and the Select Data Source option
Explanation:
A scatter plot is a plot which is used to plot the points of the data on the horizontal and the vertical axis also it depicts how one variable is affected by the another.
After preparing the scatter plot to enter the data in the scatter plot we need to use the data button and then data source option so that the data could be entered in the scatter plot
hence, option c is correct
The income statements for Federer Sports Apparel for 2022 and 2021 are presented below.
FEDERER SPORTS APPAR
Income Statement
For the Years Ended December 31
Year Increase Decrease
2019 2018 Amount %
Net sales 18,800,000 15,500,000
Cost of goods 13,200,000 7,000,000
Gross prof 5,600,000 8,500,000
Operating expenses 1,600,000 1,200,000
Depreciation expense 1,000,000 1,000,000
Inventory write-down 200,000 0
Loss (litigation) 1,500,000 300,000
Required:
Prepare a horizontal analysis for 2022 using 2021 as the base year.
Answer and Explanation:
The Preparation of horizontal analysis for 2022 using 2021 as the base year is prepared with the help of a spreadsheet.
Horizontal analysis is a method for the analysis of financial statements that indicates fluctuations in the amount of the related products over a period of time. It is a valuable instrument for determining trend situations.
So, with the help of the spreadsheet, we will be able to find the net income by using the formulas.
The horizontal analysis of the Income Statement is the analytical form of preparing the income statement to determine the accurate amount and percentage of changes in each item of the income statement.
The horizontal income statement is attached below.
The horizontal analysis determines the change in the amounts of each account. The percentage change is the division of a change in amount by the base amount of the base year.
In this case, the base year was 2021.
Therefore, the change in amounts will be determined based upon the figures of the base year.
To know more about horizontal analysis, refer to the link:
https://brainly.com/question/14698328
Pam Erickson Construction Company changed from the completed-contract to the percentage-of-completion method of accounting for long-term construction contracts during 2015. For tax purposes, the company employs the completed-contract method and will continue this approach in the future. (Hint: Adjust all tax consequences through the Deferred Tax Liability account.) The appropriate information related to this change is as follows.
Pretax Income from:
Percentage-of-Completion Completed-Contract Difference
2014 $752,200 $586,700 $165,500
2015 683,500 444,700 238,800
(a) Assuming that the tax rate is 30%, what is the amount of net income that would be reported in 2015?
Net income $
(b) What entry(ies) are necessary to adjust the accounting records for the change in accounting principle?
Answer:
a. $478,450
b.Dr Construction in Process $165,500
Cr Deferred tax liability $49,650
Cr Retained earnings $115,850
Explanation:
A. Calculation for the amount of net income that would be reported in 2015 for Pam Erickson Construction Company
Using this formula
Net income =(Income before income tax ) Income before income tax-Tax rate
Let plug in the formula
Net income= $683,500 - (683,500 × 30%)
Net income= $683,500 - $205,050
Net income= $478,450
B. Preparation of the Journal entry(ies) that are necessary to adjust the accounting records
For Pam Erickson Construction Company
Dr Construction in Process $165,500
Cr Deferred tax liability $49,650
($165,500 × 30%)
Cr Retained earnings $115,850
($165,500 × (100%-30%)
Your text outlines three basic categories of electronic commerce applications: business-to-consumer (B2C), business-to-business (B2B) and consumer-to-consumer (C2C). B2C applications:_______.
A. Involve businesses developing attractive electronic marketplaces to entice customers and sell products and services to consumers.
B. Involve both electronic business marketplaces and direct market links between businesses .
C. Involve consumers buying and selling with each other in an auction process at an auction website, as well as personal advertising of products or services to buy or sell at electronic newspaper sites or personal websites.
D. None of the choices are correct.
Answer:
A. Involve businesses developing attractive electronic marketplaces to entice customers and sell products and services to consumers.
Explanation:
The Business to Consumer (B2C) sales strategy corresponds to a type of sale aimed at the final consumer. This sale takes place at retail, and occurs according to the consumer purchase decision process, which identifies their needs, judges the options according to their preferences and desires and finally chooses the option that best suits their search for a particular product or service.
Therefore, in the B2C strategy, retail companies have as main objective to create in the consumer the desire for a purchase, so the most appropriate option for this issue is that developing attractive electronic markets will help the company to attract customers and sell products and services to consumers.
I have question with it can you help me please??
Answer:
Pick-up Later:
Set a pickup date
Process the transaction
Place all the items in the pickup area near the front of the store
Place a note on the items indicating they are sold.
Explanation:
The purpose of the above procedure is to enable the customer to take delivery of purchased goods hitch-free. The pick-up area needs to be covered against rain so that the mulch and topsoil do not degrade. It is assumed that the customer's contact information and payment have been secured before the arrangement for pick-up later.
There is a 3 percent defect rate at a specific point in a production process. If an inspector is placed at this point, all the defects can be detected and eliminated. The inspector would cost $8 per hour and could inspect units in the process at the current production rate of 30 per hour. If no inspector is hired and defects are allowed to pass this point, there is a cost of $10 per defective unit to correct the defects later on. Assume that the line will operate at the same rate (i.e., the current production rate) regardless of whether the inspector is hired or not. a. If an inspector is hired, what will be the inspection cost per unit? (Round your answer to 3 decimal places.) Cost per unit $ b. If an inspector is not hired, what will be the defective cost per unit? (Round your answer to 3 decimal places.) Cost per unit $ c. Should an inspector be hired based on costs alone? Yes No
Answer:
1a. $2.67 cost per unit
1b. $0.3 cost per unit
1c. Yes
Explanation:
1a. Calculation for what will be the inspection cost per unit If an inspector is hired
The following details were given in the question.
Defective average =3/100= 0.03
inspection rate = 30 per hour
Cost of inspector = 8 per hour
Correction cost = $10 each
Using this formula
Hired inspector =Cost per hour/Current production rate per hour
Let plug in the formula
Hired inspector=8 per hour/30 rate per hour
Hired inspector =0.267×100
Hired inspector=$2.67 cost per unit
1b. Calculation for what will be the defective cost per unit If an inspector is not hired
Using this Formula
No inspector=Defect rate %/Cost per defective
Let plug in the formula
No inspector= 3/100×$10
No inspector= $0.3 cost per unit
1c. Based on the above calculation the inspector should be hired.
Charlie hopes to accumulate $83,000 in a savings account in 10 years. If he wishes to make a single deposit today and the bank pays 3 percent compounded annually on deposits of this size, how much should Charlie deposit in the account
Answer:
PV= $61,759.80
Explanation:
Giving the following information:
Future value (FV)= $83,000
Number of years (n)= 10 years
Interest rate (i)= 3% compounded annually
To calculate the initial deposit, we need to use the following formula:
PV= FV/(1+i)^n
PV= 83,000 / (1.03^10)
PV= $61,759.80
Which of the following is an advantage of job specialization? 1 point A. The quality of work increases. B. Jobs can be mastered quickly. C. Employees are more involved with their jobs. D. The work is less repetitive. E. Task specialization has no clear advantages to the organization
Answer: B. Jobs can be mastered quickly.
Explanation:
Job specialization is when the employees in an organization focuses and concentrates on one particular aspect in a organization. Specialization makes employees more efficient and also effective at their role.
Also, jobs can be mastered quickly since the employees typically focuses on one particular aspect in the organization.
Which of the following are recommended ways to learn more about IT careers? Check all of the boxes
that apply.
scheduling an appointment with a career counselor at a school
attending an informational session
applying for an internship
renting a science fiction movie about computer viruses
contacting a professional organization, such as CompTIA
Answer:
scheduling an appointment with a career counselor at a schoolattending an informational sessionapplying for an internshipcontacting a professional organization, such as CompTIAExplanation:
To learn more about IT careers or just carriers in general, one can contact the Career counselor at school. Their job is to help students find out more abut careers so that they know which path they would like to follow.
One can also attend information sessions where they can listen to people speak on IT careers and ask questions they would like answers to as well.
A practical way to find out about IT careers is to intern at an IT firm. This way you get to see first hand what the job entails and if it is the kind of thing you would like to do.
There are also professional organizations that offer certifications in IT such as CompTIA. As they are well versed in the area, they can provide more information on IT careers including the educational background required.
Answer:
1. Scheduling an appointment with a career counselor at school.
2. Attending an informational session.
3. Applying for an internship
5. Contacting a professional organization, such as CompTIA.
Explanation: This is the correct answer on Edge 2021, just did the assignment. Hope this helps ^-^.
Digby's turnover rate for this year is 6.33%. This rate is projected to remain the same next year and no further downsizing will occur from automating. What would the total recruiting cost be for Digby, assuming it spends the same amount extra above the $1,000 recruiting base as they did this year?
Answer:
Total recruitment cost = $316.5
Explanation:
Note:
Given question is incomplete,
The number of employees = 5,000
Given:
Turnover rate for this year = 6.33%
Find:
Total recruitment cost
Computation:
Total recruitment cost = Turnover rate for this year × The number of employees
Total recruitment cost = 5,000 × 6.33%
Total recruitment cost = $316.5
The total recruiting cost will be $316.5 for Digby.
Given information
Assumed the number of employees is 5,000
Turnover rate for this year = 6.33%
Total recruitment cost = Turnover rate for this year * The number of employees
Total recruitment cost = 5,000 * 6.33%
Total recruitment cost = $316.5
Therefore, the total recruiting cost will be $316.5 for Digby.
See similar solution here
brainly.com/question/17092501
Suppose that in 1969, the U.S. economy was operating close to potential. The budget deficit experienced by the United States in 1969 was:
Answer: primarily cyclical deficit
Explanation:
Budget deficit occurs when the government expenditure for a certain year is more than the revenue the government makes.
Since the the United States economy was operating close to potential. The budget deficit experienced by the United States in 1969 was primarily cyclical deficit.
Assume the Residential Division of KappyKappy Faucets had the following results last year:
Net sales $6,360,000
Operating income 636,000
Average total assets 5,300,000
Management's target rate of return 16%
What is the division's return on investment?
Answer:
12%
Explanation:
Calculation for the division's return on investment
Using this formula
Return On Investment = Operating income /Average total assets
Let plug in the formula
Return on investment= $636,000/$5,300,000
Return on investment= 0.12*100
Return on investment=12%
Therefore the division's return on investment will be $12%
What term means managing the entire organization so that it excels on all dimensions of products and services that are important to customers?
Answer:
Total Quality Management
Explanation:
Total Quality Management is an approach in which all the employees of the company work to improve the entire process to offer a good customer experience. According to this, the answer is that the term that means managing the entire organization so that it excels on all dimensions of products and services that are important to customers is Total Quality Management.
Given the following information. Which of the statements below can you support with this information?
Maximum capacity (labor hours): 480 hours per week
Effective capacity ratio: 85 %
Actual time worked: 380 hours per week over the last two weeks
On-time delivery %: 75 percent of the jobs are being completed on time
a. More capacity needs to be added in the short term to improve performance in the system.
b. We need to look at variability in the rate at which jobs enter the shop.
c. Our workforce is not working hard enough.
d. Our workforce may be waiting on delayed arrivals of inputs needed to do the work.
Describe the reasons why you selected the specific option(s) that you did.
Answer:
d. Our workforce may be waiting on delayed arrivals of inputs needed to do the work.
Explanation:
There are two possible sources for 25% of the jobs not being delivered on time:
we have a problem with inputs required (materials or labor)we have a problem with the capacity of our facilityIf we followed Juran's Law, we can simply assume that the problem here has to do with our productive system (like 85% of production errors). Two clear problems are obvious:
only 380 hours worked out of total of 480 hours per week ⇒ why didn't anyone work during the remaining 100 hours? Is there a delay with the inputs or we don't have enough workers?only 85% of the facility's capacity is being used ⇒ why only 85% of the effective capacity ratio? If we are finishing jobs late, why do we have 15% of unused capacity?Obviously we cannot answer these questions just be reading two paragraphs, but that is what should be answered in order to solve the issues.
Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the present and proposed production approaches. If required, round percentages to one decimal place. Present Approach Proposed Approach Value-added time 23 min 23 min Non-value-added time 1,582 min 105 min Total lead time 1,605 min 1,605 min Value-added ratio (as a percent) 14 % 21 %
Answer:
Hello some parts of your question is missing attached below is the missing part
Answer : value added times : 30 minutes , 30 minutes
non-value added times: 1210 minutes, 130 minutes
Total lead times : 1240 minutes, 160 minutes
value added time as a ratio: 2.4%, 18.8%
Explanation:
Given data:
production batch sizes = 40 units
process step 1 = 6 minutes
process step 2 = 10 minutes
process step 3 = 6 minutes
process step 4 = 8 minutes
Determining : The value added, non-value added , total lead times and value added ratio under the present and proposed production approaches
UNDER PRESENT PRODUCTION APPROACH
Th value added time:
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time:
= Value added time *(Batch size -1) + move time between each step
= 30*39+8*5
= 1170 +40 = 1210 minutes
total lead time :
= value added time + non-value added time
= 30 + 1210 = 1240 minutes
value added time as a percentage/ratio
(value added time / total lead time) * 100
= 30 / 1240 * 100 = 2.4%
UNDER PROPOSED PRODUCTION APPROACH
value added time :
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time :
= Value added time *(Batch size -1) + time between each step
= 30*4+2*5 = 120 + 10 = 130 mins
total lead time :
= value added time + non-value added time = 30 +130 = 160 mins
value added time as a percentage/ratio:
(value added time / total lead time ) * 100
= (30 / 160) * 100 = 18.8%
Zane, a new employee, is eager to get a promotion soon, and he hopes he can quickly rise through the ranks at the company. He decides to ask his supervisor, Mary, for professional development advice. This is an example of which of the following types of communication?
a. Downward
b. None of these are correct.
c. Upward
d. Horizontal
e. Diagonal
Answer:
C
Explanation:
Upward communication is communication from lower hierarchy in the organisation to higher hierarchy in the organisation
Downward communication is communication from higher hierarchy in the organisation to lower hierarchy in the organisation
Horizontal communication is communication within the same organisation hierarchy
Diagonal communication is cross functional communication between employees at different levels of the organisation
A firm has net working capital of $2,715, net fixed assets of $22,407, sales of $31,350, and current liabilities of $3,908. How many dollars' worth of sales are generated from every $1 in total assets
Answer:
So, from every $1 of total assets, $1.08 worth of sales are generated.
Explanation:
To calculate how many dollars worth of sales are generated by $1 of total assets, we use the total assets turnover ratio. It is an accounting measure that measures the efficiency of the company's assets in generating sales. It calculates the dollar values of sales generated by each $1 of total assets. The formula for total assets turnover is,
Total Assets Turnover = Sales / Average Total Assets
We already know the level of sales. We need to determine the value of total assets first.
Total Assets = Fixed assets + Current Assets
As we know that net working capital = current assets - current liabilities,
So, the current assets are,
2715 = Current assets - 3908
2715 + 3908 = Current assets
Current assets = $6623
Total assets = 6623 + 22407
Total assets = $29030
Total Assets Turnover = 31350 / 29030
Total assets turnover = 1.0799 rounded off to 1.08
So, from every $1 of total assets, $1.08 worth of sales are generated.
A mail-order house uses 18,000 boxes a year. Carrying costs are 60 cents per box a year, and ordering costs are $96. The following price schedule applies.
Determine:
A. The optimal order quantity.
B. The number of orders per year.
of boxes: 1,000-1,999 Price per box: $1.25
of boxes: 2,000- 4,999 Price per box: $1.20
of boxes: 5,000- 9,999 Price per box : $1.15
of boxes: 10,000 or more Price per box : $1.10
Answer:
Explanation:
Given that:
A mail-order house uses 18,000 boxes a year.
Carrying costs are 60 cents per box a year =$0.60
and ordering costs are $96.
Determine:
A. The optimal order quantity.
The optimal order quantity can be calculated by using the formula:
[tex]Q_o = \sqrt{\dfrac{2DS}{H}}[/tex]
[tex]Q_o = \sqrt{\dfrac{2*18000*96}{0.60}}[/tex]
[tex]Q_o = \sqrt{\dfrac{3456000}{0.60}}[/tex]
[tex]Q_o = \sqrt{5760000}[/tex]
[tex]Q_o = 2400 \ boxes[/tex]
B. The number of orders per year.
of boxes: 1,000-1,999 Price per box: $1.25
of boxes: 2,000- 4,999 Price per box: $1.20
of boxes: 5,000- 9,999 Price per box : $1.15
of boxes: 10,000 or more Price per box : $1.10
SInce 2400 boxes lies within ''of boxes: 2,000- 4,999 Price per box: $1.20 ''
Total cost = Carrying cost + ordering cost + Purchasing cost
[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]
[tex]Total \ cost =(\dfrac{2400}{2} )0.60 +(\dfrac{18000}{2400}) 96+1.20*18000[/tex]
Total cost = ( 1200) 0.60 + 7.5(96) + 1.20(18000)
Total cost = 720 + 720 + 21600
Total cost = $ 23040
If the order size is 5000, the price per box will be 1.15
[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]
[tex]Total \ cost =(\dfrac{5000}{2} )0.60 +(\dfrac{18000}{5000}) 96+1.15*18000[/tex]
Total cost = 2500 (0.60) + 3.6 (96) + 20700
Total cost = 1500 + 345.6 + 20700
Total cost = $22545.6
If the order size is 10000 , the price per box will be 1.10
[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]
[tex]Total \ cost =(\dfrac{10000}{2} )0.60 +(\dfrac{18000}{10000}) 96+1.10*18000[/tex]
Total cost = 5000 (0.60) + 1.8(96) + 19800
Total cost = 3000 + 172.8 + 19800
Total cost = $22972.8
From the three total cost, the least minimum cost of ordering is: 5000
So; the number of orders per year = total number of boxes per year/ boxes per order
the number of orders per year = 18000/5000
the number of orders per year = 3.6 orders per year
You are an investor who wants to form a portfolio that lies to the right of the "optimal" minimum standard deviation portfolio on the efficient frontier. You must: 0 / 1 puntos Invest only in risky securities. Borrow money at the risk-free rate, invest in the minimum standard deviation portfolio and, in addition, only in risky securities. Borrow money at the risk-free rate and invest everything in the minimum standard deviation portfolio. Invest only in risk-free securities.
Answer:
Correct Answer:
invest in the minimum standard deviation portfolio and, in addition, only in risky securities.
Explanation:
For an investor aiming to invest in a portfolio so that, his minimum standard deviation would lie towards the optimal right, he or she would need to invest in extremely risky securities. And, also, there will be need to maintain minimum standard deviation portfolio.
