If Bulb B burns
out, what happens?
A Bulb A and C will stay lit.

Answer:

One standard kilogram is define as the mass of platinium iridium cylinder having equal diameter and height kept at the particular condition of international bureo of weigh and measure sevre near paris.

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Explanation:

Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.

Answer:

When an object falls freely to the ground, its acceleration is uniform. Hint: When an object falls freely on the ground, the force of the gravity works on it. So the acceleration on the object is the acceleration due to gravity. So the acceleration is uniform on the freely falling body.

Answer:

I HOPE IT WILL HELP YOU.

:D

applied force is a contact force

Explanation:

the force acting perpendicularly on unit area of surface

A pressure of one Newton per square meter .. The SI unit of 1 Pascal pressure is 1 Newton per square metre .

Answer:

c) sin c /sin d

because light is moving from denser to shallower medium

b) refraction of light

Explanation:

To calculate the density of a substance, its mass and volume has to be determined. So that:

i. For the milk in the carton, its mass and volume should be known.

ii. For the two objects given in the question, their individual masses and volumes have to be determined.

Density of a substance (ρ) is the rate of the mass (m) of the substance to its volume (V). It is measure in kg/[tex]m^{3}[/tex].

i.e ρ = [tex]\frac{m}{V}[/tex]

The density of a substance can be determined once the mass and its volume have been accurately measured.

1. How to measure the density of the contents of a milk carton.

a. Determine the mass of the milk carton with its content.

b. Determine the mass of the milk carton when empty.

c. Subtract the mass of the milk carton when empty from the mass of the carton with its content. This will give the mass of the milk in the carton.

d. Using a beaker, measure the volume of the milk.

e. Divide the mass of the milk by its volume to determine its density.

2. How to measure the densities of two objects of equal mass.

a. Fill an Eureka's can or a beaker with sprout with water to its brim.

b. Slowly drop the mass into the beaker with water so as to collect the volume of the liquid displaced into another beaker.

c. The volume of the liquid displaced is the volume of the mass.

d. Divide the mass of the object by its volume to determine its density.

NB: These procedures are observed to determine the densities of the two object individually.

For more explanations, visit: https://brainly.com/question/17924956

Answer:

when you are paddling the push carry on when you paddle the hard put on the push.

Answer:

Because of inertia

Explanation:

As stated in Newton first law "An object at rest will stay at rest, an object in motion will stay in motion unless it is acted upon by a force."

For an example:

If you have a drink without a lid in a car and a car suddently the car stop, u will automatically try to catch the drink preventing it from spilling. This is because that the drink that was in motion with the car want to stay in motion, but when the car stop, the drink still wanna be in motion, that's why it will be flying off and spill if u don't catch it.

Back to the question:

if a bicyccle is in motion, it will wants to be in motion untill a force act upon it, let's say a bump or fricition.

hope this help. give me the brainliest if u can.

Answer:

A stone is more dense than water and the air in draft of the boat is less dense than water.

[tex]\boxed{\sf E_P=mgh}[/tex]

[tex]\\ \sf\longmapsto E_P=25(10)(10)[/tex]

[tex]\\ \sf\longmapsto E_P=25(100)[/tex]

[tex]\\ \sf\longmapsto E_P=2500J[/tex]

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

Answer:

D. [tex]^{39}_{18} Ar[/tex]

Explanation:

The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;

[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]

Answer:

high temperature and low pressure

Explanation:

Real gases have intermolecular forces of attraction between them hence they can be liquified. However, gases approach ideal behavior at high temperature and low pressure.

According to the kinetic theory of gases, gases molecules move at incredibly high speeds and exhibit no intermolecular interaction because the gas molecules are isolated from each other.

At high temperature and low pressure, gas molecules are found to possess maximum kinetic energy. They move with a very high velocity and have minimal intermolecular interaction between them in accordance with the proposition of the kinetic theory of gases.

After 1 hour, 80 g decays to 40 g.

After another hour (total 2 hours), 40 g decays to 20 g.

After another hour (total 3), 20 g decays to 10 g.

After one more hour (total 4), 10 g decays to (D) 5 g.

Answer:

a) ii

b) i

c)iii

d)iii

e) i

f)iii

Explanation:

i hope this will help

Answer:

the answer of b is N and d is mol

Answer:

A

Explanation:

a_c = v^2/r

v = sqrt*a_c × r*

v = sqrt * 18 × 9*

v = 9×sqrt *2*

v = 12. 7 m/s

Answer:

b. the seasons

Explanation:

Answer:

The force exerted by the earth on a body is called gravitational of a body.

i think this is the answer

Answer:weight

Explanation:

Answer:

yes, the density of ice is less than the density of water. Ice floats on water.

Explanation:

Answer:

Velocity= 3[tex]ms^{-1}[/tex]

Explanation:

Formula to find velocity = Displacement/time taken

therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]

Answer:

The field strength needed to produce a 24.0 V peak emf is 0.5913 T

Explanation:

From the formula for maximum emf of a generator,

[tex]emf_{max}= NAB\omega[/tex]

∴ [tex]B = \frac{emf_{max} }{NA\omega}[/tex]

Where N is the number of loops

A is cross section of loops

B is magnetic field strength

ω is the angular frequency of loops

From the question, [tex]emf_{max} = 24.0V[/tex]

N = 300 turns

A = l × b ( since it is a rectangular coil)

A = 6.46 cm × 5.00 cm

A = 0.0646 m × 0.05 m

A = 0.00323 m²

ω = 400 rpm = (400/60)×2π rad/s

ω = 41.8879 rad/s

Putting all the parameters into the formula

[tex]B = \frac{emf_{max} }{NA\omega}[/tex]

[tex]B = \frac{24.0}{300\times0.00323\times41.8879}[/tex]

[tex]B = 0.5913T[/tex]

Hence, the field strength needed to produce a 24.0 V peak emf is 0.5913 T

Answer:

Choose B

Explanation:

Hope Can I help you

Answer:

The answer is "4.97 m".

Explanation:

[tex]u = 1.23\ \frac{m}{s}\\\\[/tex]

[tex]H= 1.45 \ m\\\\[/tex]

[tex]\mu = 0.231\\\\[/tex]

The law of conservation tells us that heat energy at the top with kinetic energy at the top equals kinetic energy at the base.

[tex]mgh+\frac{1}{2}mu^2=\frac{1}{2}mv^2\\\\2gh +u^2 =v^2\\\\v=\sqrt{u^2+2gh}[/tex]

[tex]v=\sqrt{(1.23\ \frac{m}{s})^2+2(9.81 \frac{m}{s^2}) +(1.45\ m)[/tex]

   [tex]=\sqrt{1.5129+19.62 +1.45}\\\\=\sqrt{22.5829}\\\\=4.75\ \frac{m}{s}[/tex]

Friction force is given by the formula

[tex]f=-\mu mg \\\\ma= -\mu mg\\\\a=-\mu g\\\\[/tex]

[tex]= -(0.231) \ (9.81\ \frac{m}{s^2})\\\\=-2.26611 \ \frac{m}{s^2}[/tex]

Now by using an equation of motion as

[tex]v^2-u^2= 2as[/tex]

From the above the distance traveled is

[tex]S=\frac{v^2-u^2}{2a}[/tex]

[tex]S=\frac{(0)^2-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\[/tex]

   [tex]=\frac{-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\=\frac{-22.5625}{-4.53222}\\\\=4.97[/tex]

In other words, the distance from the bottom of the chute to the point where the toy zebra comes to rest is [tex]s = 4.97\ m[/tex]