Answer:
Option (a).
Explanation:
According to the scenario, computation of the given data are as follow:-
Real GDP = Base Year Price × Current Year Quantity
Real GDP in 2016= $2 × 6 million + $1 × 4 million
= $12 million + $4 million = $16 million
Real GDP in 2017 = $2 × 8 million + $1 × 6 million
= $16 million + $6 million = $22 million
According to the analysis, the real GDP in 2017 is $22 million. So (a) option is correct.
A bakery buys sugar from a big distributor to use in baking cakes. Typically, they use 3663 bags of sugar in a year. The price of sugar is typically $14 per bag. The cost to the bakery for placing an order is $26, and the annual carrying cost is $17 per bag. The distributor has offered the bakery the following volume discount schedule: Order Size Discount rate on the original price 1--449 0 percent 450--799 5 percent more than 800 10 percent We are trying to find how many bags of sugar should the store order, whenever they place a new order of sugar.Assume 364 days a year and 52 weeks a year. IMPORTANT: Note, the discounts off of original price are reported. You need to calculate the actual prices. Keep two decimal places in your calculations.If we ignore the discounts, how many bags of sugar should we order
A firm that has an ROE of 12% is considering cutting its dividend payout. The stockholders of the firm desire a dividend yield of 4% and a capital gain yield of 9%. Given this information, which of the following statements is (are) correct? I. All else equal, the firm's growth rate will accelerate after the payout change. II. All else equal, the firm's stock price will go up after the payout change. III. All else equal, the firm's P/E ratio will increase after the payout change. Multiple Choice I only
Answer:
I only is correct. That is, all else equal, the firm's growth rate will accelerate after the payout change.
Explanation:
Holding every other condition constant, the cutting of the company's dividend payout will lead to a permanent fall in the dividend per share and this will cause a decrease in price.
However, the cutting the company's dividend payout will increased the retention rate that will increase the growth rate of the company.
Therefore, all else equal, the firm's growth rate will accelerate after the payout change.
Your bagel shop uses both capital and labor in the production of bagels. In this production process capital and labor are substitutes. If you install a new oven and the marginal product of capital increases, you will:
a. reduce the number of workers you employ
b. increase the number of workers you employ
c. reduce the amount of capital you are using not make any changes since you are already maximizing profit
Answer:
The answer is option A) reduce the number of workers you employ
Explanation:
Installing a new oven is capital intensive. So, for a business person to incur an additional capital cost to aid the efficiency of production, something has to give.
In this case, where capital and labor are substitutes, installing a new oven will drastically reduce the workload thereby necessitating a reduction in the number of workers.
By implication, the cost of paying wages which is a recurrent expenditure will reduce. In the long run and if the oven is maintained, it will e a very cost effective option.
Installing a new oven also suggests a marginal increment in capital.
Andrews Corporation has income from operations of $253,000. In addition, it received interest income of $25,300 and received dividend income of $28,900 from another corporation. Finally, it paid $13,000 of interest income to its bondholders and paid $47,400 of dividends to its common stockholders. Using the 2013 corporate tax schedule, what is the firm’s federal income tax? Round your intermediated and final answers to the nearest cent. $
Answer:
$107,122
Explanation:
corporate tax rate during 2013 = 39.1%
Andrews Corporation net taxable income:
from operations $253,000from interests $25,300from dividends $28,900 - dividends received deductions $20,230 = $8,670Deductions on net taxable income*:
interest paid to bondholders = $13,000Net taxable income = $286,970 - $13,000 = $273,970
federal income tax = $273,970 x 39.1% = $107,122
*Dividends are paid with retained earnings which include after tax net income. They are not tax deductible.
Haylock Inc. bases its manufacturing overhead budget on budgeted direct labor-hours. The direct labor budget indicates that 7,800 direct labor-hours will be required in August. The variable overhead rate is $1.20 per direct labor-hour. The company's budgeted fixed manufacturing overhead is $100,560 per month, which includes depreciation of $8,790. All other fixed manufacturing overhead costs represent current cash flows. The August cash disbursements for manufacturing overhead on the manufacturing overhead budget should be:
Answer:
Total cash= $101,130
Explanation:
Giving the following information:
Estimated direct labor hours= 7,800
The variable overhead rate is $1.20 per direct labor-hour.
The company's budgeted fixed manufacturing overhead is $100,560 per month, which includes depreciation of $8,790.
We need to deduct the depreciation expense because it is not a cash disbursement.
Cash disbursement:
Variable overhead= 7,800*1.2= $9,360
Fixed overhead= (100,560 - 8,790)= $91,770
Total cash= $101,130
Dan Bumblauskas is the owner of a small Iowa company that produces electric knives used to cut fabric. The annual demand is for 10 comma 500 knives, and Dan produces the knives in batches. On average, Dan can produce 190 knives per day; during the production process, demand has been about 70 knives per day. The cost to set up the production process is $85, and it costs Dan $1.10 to carry a knife for 1 year. How many knives should Dan produce in each batch?
Answer:
1,012.36 knives produced in each month
Explanation:
Data provided in the question
Annual demand = 10,500
Ordering cost = $85
Holding cost = $1.10
Daily demand = 70 knives per day
Production knives per day = 190 knives
Based on the given information, we need to apply the formula which is shown below:[tex]Economic\ order\ quantity = \sqrt{\frac{2\times annual\ demand \times ordering\ cost}{holding\ cost} \times 1 - \frac{daily\ demand}{production}[/tex]
[tex]Economic\ order\ quantity = \sqrt{\frac{2\times 10,500 \times\$85}{\$1.10} \times 1 - \frac{70}{190}[/tex]
= 1,012.36 knives produced in each month
We simply applied the above formula to find out the knives produced in each batch
Anderson Steel Company began 2018 with 550,000 shares of common stock outstanding. On March 31, 2018, 140,000 new shares were sold at a price of $50 per share. The market price has risen steadily since that time to a high of $55 per share at December 31. No other changes in shares occurred during 2018, and no securities are outstanding that can become common stock. However, there are two agreements with officers of the company for future issuance of common stock. Both agreements relate to compensation arrangements reached in 2017. The first agreement grants to the company president a right to 42,000 shares of stock each year the closing market price is at least $53. The agreement begins in 2019 and expires in 2022. The second agreement grants to the controller a right to 47,000 shares of stock if she is still with the firm at the end of 2026. Net income for 2018 was $5,200,000.
Required:
Compute Anderson Steel Company's basic and diluted EPS for the year ended December 31, 2018. (Enter your answers in thousands.)
Answer:
EPS = $7.94
diluted EPS = $7.94, since there are no diluted shares in 2018
Explanation:
January 2018 = 550,000 common stocks
March 31 = 140,000 new shares issued = 105,000 weighted stocks
net income = $5,200,000
EPS = net income / weighted common stocks = $5,200,000 / (550,000 + 105,000) = $5,200,000 / 655,000 stocks = $7.939 ≈ $7.94 per stock
there are no diluted shares since the agreement with the president of the board starts in 2019, and we are calculating the EPS for 2018. The same applies to the controller, since her agreement starts in 2026.
Coast to Coast Surfboards Inc. manufactures and sells two styles of surfboards, Atlantic Wave and Pacific Pounder. These surfboards are sold in two regions, East Coast and West Coast. Information about the two surfboards is as follows:
Atlantic Wave Pacific Pounder
Sales price $280 $130
Variable cost of goods sold per unit 220 97
Manufacturing margin per unit $60 $33
Variable selling expense per unit 32 18
Contribution margin per unit $28 $15
The sales unit volume for the sales territories and products for the period is as follows:
East Coast West Coast
Atlantic Wave 30,000 21,000
Pacific Pounder 0 21,000
Required:
Prepare a contribution margin by sales territory report. Calculate the contribution margin ratio for each territory as a whole percent
Answer:
Contribution margin ratio:
For East Coast = 10%
For West Coast = 8.05%
Explanation:
As per the data given in the question,
Contribution margin by sales territory report :
C C S Inc.
Contribution margin by Territory
Particulars East Coast West Coast
Sales (a) $8,400,000 $8,610,000
(30,000×$280)+(0×$130)
(21,000×$280)+(21,000×$130)
Less: variable cost of goods sold(b) $6,600,000 $6,657,000
(30,000×$220)+(0×$97)
(21,000×$220)+(21,000×$97)
Manufacturing margin (c=a-b) $1,800,000 $1,953,000
Less: Variable selling expense (d) $960,000 $1,260,000
(30,000×$32)+(0×$28)
(21,000×$32)+(21,000×$28)
Contribution margin (e=c-d) $840,000 $693,000
For East Coast:
Contribution margin ratio = (Contribution margin ÷ Sales revenue)×100
=($840,000÷ $8,400,000)×100
= 10%
For west coast:
Contribution margin ratio = (Contribution margin ÷ Sales revenue)×100
=($693,000 ÷ $8,610,000)×100
= 8.05%
Riegel Company uses the LCNRV method, on an individual-item basis, in pricing its inventory items. The inventory at December 31, 2014, consists of products D, E, F, G, H, and I. Relevant per unit data for these products appear below.
Item D Item E Item F Item G Item H Item I
Estimated selling price $120 $110 $95 $90 $110 $90
Cost 75 80 80 80 50 36
Cost to complete 30 30 25 35 30 30
Selling costs 10 18 10 20 10 20
Using the LCNRV rule, determine the proper unit value for statement of financial position reporting purposes at December 31, 2014, for each of the inventory items above.
Answer:
The answer is 75 that is what i put and got it correct
Stone Company changed its method of pricing inventories from FIFO to LIFO. What type of accounting change does this represent? A change in accounting estimate for which the financial statements for prior periods included for comparative purposes should be restated. A change in accounting principle for which the financial statements for prior periods included for comparative purposes should be presented as previously reported. A change in accounting estimate for which the financial statements for prior periods included for comparative purposes should be presented as previously reported. A change in accounting principle for which the financial statements for prior periods included for comparative purposes should be restated.
Answer:
A change in accounting principle for which the financial statements for prior periods included for comparative purposes should be presented as previously reported.
Explanation:
Since the accounting method is being changed from FIFO to LIFO, any adjusting of prior year balances would be impractical. If the change is from LIFO to FIFO, then it makes more sense to adjust prior year balances. By impractical, it means that any changes would be too difficult and expensive to determine, and the value of the change is insignificant (materiality principle).
Generally US GAAP rules require that changes from FIFO to LIFO be disclosed in the footnotes only.
The following information relates to the pension plan for the employees of Turner Co.: 1/1/20 12/31/20 12/31/21 Projected benefit obligation 9,765,000 10,458,000 14,007,000 Fair value of plan assets 8,925,000 10,920,000 12,054,000 AOCI – net (gain) or loss -0- (1,512,000) (1,680,000) Settlement rate (for year) 11% 11% Expected rate of return (for year) 8% 7% Turner estimates that the average remaining service life is 16 years. Turner's contribution was $1,323,000 in 2021 and benefits paid to retired employees was $987,000. The amount of AOCI (net gain) amortized in 2021 is
Answer:
The amount of AOCI (net gain) amortized in 2021 is $26,250
Explanation:
In order to calculate the calculate the amount of AOCI (net gain) amortized in 2021 we would have to use the following formula:
amount of AOCI (net gain) amortized in 2021=(AOCI net gain 12/31/20-Corridor amount for 2021)/Average remaining service life
AOCI net gain 12/31/20=$1,512,000
Corridor amount for 2021=$1,092,000=10,920,000*10%
Average remaining service life=16
Therefore, AOCI (net gain) amortized in 2021=($1,512,000-$1,092,000)/16
AOCI (net gain) amortized in 2021=$26,250
Oklahoma enacts a law requiring all businesses in the state to donate 10 percent of their profits to Protestant churches that provide services to indigent persons. Price-Lo Mart files a law suit to block the enforcement of the law. The court will probably decide that this law violates: a. the Free Exercise clause. b. the Supremacy clause. c. the Equal Protection clause. d. the Establishment clause.
Answer: d. the Establishment clause.
Explanation:
The Establishment Clause was put in place as a limitation by the United States Congress to prevent excesses or stop it from passing legislation forcing an establishment, religion, which broadly made it illegal for the government to promote theocracy or promote a specific religion with taxes. As this is the case with the state asking business to donate 10% of their profit to Protestant.
Answer:
The establishment clause.
Explanation:
Establishment clause, also called establishment-of-religion clause, clause in the First Amendment to the U.S. Constitution forbidding Congress from establishing a state religion. It prevents the passage of any law that gives preference to or forces belief in any one religion. It is paired with a clause that prohibits limiting the free expression of religion.
As the citizenry became more diverse, however, challenges arose to existing laws and practices, and eventually, the Supreme Court was called upon to determine the meaning of the establishment clause.
Though not explicitly stated in the First Amendment, the clause is often interpreted to mean that the Constitution requires the separation of church and state.
The classical dichotomy and the neutrality of money
The classical dichotomy is the separation of real and nominal variables. The following questions test your understanding of this distinction.
Maria spends all of her money on paperback novels and beignets. In 2011 she earned $27.00 per hour, the price of a paperback novel was $9.00, and the price of a beignet was $3.00.
Which of the following give the nominal value of a variable?
1-The price of a beignet is $3.00 in 2011.
2-Maria's wage is $27.00 per hour in 2011.
3-The price of a beignet is 0.33 paperback novels in 2011.
Which of the following give the real value of a variable?
1-The price of a paperback novel is 3 beignets in 2011.
2-Maria's wage is 9 beignets per hour in 2011.
3-The price of a paperback novel is $9.00 in 2011.
Suppose that the Fed sharply increases the money supply between 2011 and 2016. In 2016, Maria's wage has risen to $54.00 per hour. The price of a paperback novel is $18.00 and the price of a beignet is $6.00.
In 2016, the relative price of a paperback novel is _________
Between 2011 and 2016, the nominal value of Maria's wage (increases/decreases/remains the same) and the real value of her wage ____________
Monetary neutrality is the proposition that a change in the money supply ________ nominal variables and ______ real variables.
Answer:
1. Relative price = $3
2. Increases
3. affects , not affect
Explanation:
As per the data given in the question,
1) The relative price of a paperback novel in 2016 = Maria,s wage ÷ Price of a paperback novel
= $54÷$18
= $3
2) Between 2011 and 2016, the nominal value increases and the real value of Maria's wage remains the same.
3)Monetary neutrality is proposition that the change in the money supply affects the nominal variables but it does not affect the real variables.
Joe Jenkins, the owner of Jenkins Manufacturing, is considering whether to produce a new product. Joe will be selling the product for a price of $70 per unit. If he uses the current equipment, Joe estimates the fixed costs per year to be $40,000 and variable costs for each unit produced to be $50. However, Joe is considering the purchase of new equipment that would produce the product more efficiently. Joe’s fixed cost would be raised to $60,000 per year, but the variable cost would be reduced to $25 per unit. If Joe's demand forecast is 900 units, should Joe produce the product using the existing or the new equipment? Produce using the existing equipment. Produce using the new equipment. Does not matter, which equipment is used. The product should not be produced at all.
Answer:
Jenkins Manufacturing
Joe should produce using the new equipment.
Explanation:
a) Costs incurred using the old equipment:
Variable costs = $45,000 ($50 x 900)
Fixed costs = $40,000
Total costs = $85,000
Operating Loss = $22,000 ($63,000 - 85,000)
b) Costs incurred using the new equipment:
Variable costs = $22,500 ($25 x 900)
Fixed costs = $60,000
Total costs = $82,500
Operating Loss = $19,500 ($63,000 - 82,500)
Production using the new equipment would reduce the operating loss by $2,500.
The company should produce by using the new equipment.
Based on thw information given, the cost that's incurred using the old equipment will be
Variable costs = ($50 x 900) = $45,000
Fixed costs = $40,000
Total costs = Fixed cost + Variable cost
= $40000 + $45,000
= $85,000
Operating Loss will be:
= ($63,000 - 85,000) = -$22000
The costs incurred using the new equipment will be:
Variable costs = ($25 x 900) = $22,500
Fixed costs = $60,000
Total costs = $60000 + $22500 = $82,500
Operating Loss = ($63,000 - 82,500) = -$19,500
Based on the calculation, the company should produce by using the new equipment.
Read related link on:
https://brainly.com/question/15020702
On January 1, 2021, Legion Company sold $250,000 of 6% ten-year bonds. Interest is payable semiannually on June 30 and December 31. The bonds were sold for $163,976, priced to yield 12%. Legion records interest at the effective rate. Legion should report bond interest expense for the six months ended June 30, 2021, in the amount of: (Round your answer to the nearest dollar amount.)
Answer:
The bond interest expense to be shown in profit or loss as t 30 June 2021
$9,838.56
Explanation:
The bond interest expense is the actual finance cost of using the funds made available by bondholders while the coupon payment is the portion of the finance cost paid to them periodically.
Interest expense=bonds cash proceeds*yield to maturity*6/12
bonds cash proceeds is $163,976
yield to maturity is 12%
interest expense=$163,976*12%*6/12=$9,838.56
Answer:
$9,838.56
Explanation:
Interest Expense using effective interest rate method can determined by multiplying the carrying value of the bond and yield rate of the bond because the bonds issued on the discount has different interest expense than the interest payment made to bond holder.
As the interest is paid semiannually the interest expense will be calculated for only 6 months.
Interest expense=Cash proceeds on issuance of bond x YTM x 6/12
As per given data
Cash proceeds are $163,976
YTM is 12%
Interest expense=$163,976 x 12% x 6/12=$9,838.56
A company sells goods to a customer who will pay the full amount in 30 days.How should the company record the sale
Answer:
Credit sales
Debit receivables
Explanation:
This is a sales on account transaction which affect the sales and receivables account.
When this transaction occurs , the company has definitely made a sale which will lead to an inflow of cash in 30 days time, even though the income is recognized immediately according to the accrual method of accounting
To record this , the sales account is credited with the value of the goods sold and the account receivable is debited for with the same amount.
The receivable is a record of payment being owed to the company by its customers.
The following information is taken from the accounts of Latta Company. The entries in the T-accounts are summaries of the transactions that affected those accounts during the year. Manufacturing Overhead (a) 486,144 (b) 405,120 Bal. 81,024 Work in Process Bal. 10,880 (c) 754,000 298,500 90,500 (b) 405,120 Bal. 51,000 Finished Goods Bal. 39,000 (d) 662,000 (c) 754,000 Bal. 131,000 Cost of Goods Sold (d) 662,000 The overhead that had been applied to production during the year is distributed among Work in Process, Finished Goods, and Cost of Goods Sold as of the end of the year as follows: Work in Process, ending $ 24,480 Finished Goods, ending 62,880 Cost of Goods Sold 317,760 Overhead applied $ 405,120 For example, of the $51,000 ending balance in work in process, $24,480 was overhead that had been applied during the year. Required: 1. Identify reasons for entries (a) through (d). 2. Assume that the underapplied or overapplied overhead is closed to Cost of Goods Sold. Prepare the necessary journal entry. 3. Assume that the underapplied or overapplied overhead is closed proportionally to Work in Process, Finished Goods, and Cost of Goods Sold. Prepare the necessary journal entry.
Answer and Explanation:
As per the data given in the question,
1.
a) Cost of goods manufactured.
b) Cost of goods sold.
c) Overhead cost applied to work in process
d) Actual manufacturing overhead cost.
2. Journal Entry
Manufacturing overhead A/c Dr. 81,024
To cost of goods sold A/c. 81,024
3.
Work in process ending $24,480 =6.04%
Finished goods ending $62,880 =15.52%
Cost of goods sold $317,760 =78.44%
Total cost $405.120 =100%
To calculate overhead allocation :
Work in process ending = ($81,024× 6.04%) =$4,894
Finished goods ending = ($81,024 × 15.52%) =$12,575
Cost of goods sold = ($81,024 × 78.44%) = $63,355
Total cost = $81,024
Journal Entry
Manufacturing overhead A/c Dr. 81,024
To work in process A/c. $4,893
To finished goods A/c. $12,575
To cost of goods sold A/c. $63,555
a doctor works in a....
Answer:
Clinic or Hospital
Explanation:
:)
Financial statement data for the years ended December 31 for Parker Corporation are as follows: Current Year Prior Year Sales $2,595,600 $2,409,498 Fixed assets (net): Beginning of year $901,070 $820,000 End of year 829,330 901,070 a. Determine the fixed asset turnover ratio for the current and prior years. Round your answers to one decimal place. Current Year: Prior Year: b. Does the change in fixed asset turnover ratio from the prior year to the current year indicate a favorable or unfavorable trend
Answer:
we need to calculate the Average Fixed assets for both the periods.
Average Fixed Assets = (Fixed Assets at the beginning + Fixed assets at the ending period)/2
Current Year = ($901070+829330)/2
= 1730400/2
=$865200
Prior Year = $820000+901070
= 1721070/2
= $860535
Fixed Assets Turnover = Sales/Average Fixed Assets
Current year = $2595600/865200
= 3
Prior Year = $2409498/860535
= 2.8
b) There is an increase in the Fixed asset turnover which indicates an increase in efficiency of using fixed assets to generate sales.
Answer:
a. Current year 1.5 Prior year 1.4
b. Yes it indicates a favorable trend as it shows that sales of $1.50 was generated for every $1 invested in current year as against $1.40 for every $1 invested in prior year.
Explanation:
Fixed Asset turnover is the ratio of revenue to average Fixed assets of a company.
It is a financial indicator that shows how much revenue a company generates in an accounting period for each $ 1 invested in assets (fixed asset in this case).
Average assets in the
current year
= $901,070 + $829,330
= $1,730,400
Prior year
= $820,000 + $901,070
= $1,721,070
As such fixed assets turnover for
current year
= $2,595,600/$1,730,400
= 1.5
prior year
= $2,409,498/$1,721,070
= 1.4
Stefani Company has gathered the following information about its product. Direct materials: Each unit of product contains 3.90 pounds of materials. The average waste and spoilage per unit produced under normal conditions is 1.10 pounds. Materials cost $4 per pound, but Stefani always takes the 2.00% cash discount all of its suppliers offer. Freight costs average $0.40 per pound. Direct labor. Each unit requires 1.60 hours of labor. Setup, cleanup, and downtime average 0.10 hours per unit. The average hourly pay rate of Stefani’s employees is $10.90. Payroll taxes and fringe benefits are an additional $3.20 per hour. Manufacturing overhead. Overhead is applied at a rate of $7.60 per direct labor hour. Compute Stefani’s total standard cost per unit
Answer:
$58.49 per unit
Explanation:
According to the scenario, computation of the given data are as follow:-
We can calculate the total standard cost by using following formula:-
Material Cost Per Unit = Material Cost × (1 - Cash Discount Rate) + Freight Average Cost
= $4 × (1 - 0.02) + .40
= $4 × 0.98 + .40
= $4.32 per pound
Material Used Per Unit = Each Unit Product Contain Material + Average Waste and Spoilage Per Unit Produced
= 3.90 + 1.10
= 5
Direct Material Cost= Material Cost Per Unit × Material Used Per Unit
= $4.32 × 5
= $21.6 per unit
Cost Per hour = Average hour Pay Rate + Payroll Taxes and Fringe Benefits Cost
= $10.90 + $3.20
= $14.1
Direct Labor hour = Cost Per hour × Each Unit Required hour
= $14.1 × (1.60 + 0.10)
= $14.1 × 1.70
= $23.97 per unit
Manufacturing Overhead
= Overhead Applied Rate Per Direct Labor hour × Each Unit Required Hour
= $7.60 × (1.60 + 0.10)
= $7.60 × 1.70
= $12.92 per unit
Total Standard Cost Per Unit = Direct Material Cost + Direct Labor Cost + Manufacturing Overhead
= $21.6 + $23.97 + $12.92
= $58.49 per unit
The Computation of Stefani's total standard cost per unit will give result of $58.49 per unit.
Total Standard Cost
To Calculate Total Standard Cost we need to add Direct Material Cost, Direct Labor Cost and Manufacturing Overhead.
A. Direct Material Cost = Material Cost Per Unit × Material Used Per Unit
Material Cost Per Unit = Material Cost × (1 - Cash Discount Rate) + Freight Average Cost
= $4 × (1 - 0.02) + .40
= $4.32 per pound.
Material Used Per Unit = Each Unit Product Contain Material + Average Waste and Spoilage Per Unit Produced
= 3.90 + 1.10
= $5
Direct Material Cost = $4.32 × 5 = $21.6 per unit.
B. Direct Labor Cost
It equals to Cost Per hour × Each Unit Required hour.
Cost Per hour = Average hour Pay Rate + Payroll Taxes and Fringe Benefits Cost
= $10.90 + $3.20
= $14.1
Direct Labor Cost = $14.1 × (1.60 + 0.10) = $23.97 per unit
C. Manufacturing Overhead
It equals to Overhead Applied Rate Per Direct Labor hour × Each Unit Required Hour
= $7.60 × (1.60 + 0.10)
= $12.92 per unit.
Total Standard Cost Per Unit = A + B + C = $21.6 + $23.97 + $12.92
= $58.49 per unit
Learn More about Standard Cost here:
https://brainly.com/question/25279292
When Starbucks sells "Starbucks" T-shirts in its coffee shops or when the Chicago Cubs peddle cubs branded merchandise at Wrigley Field, why are their marketers so happy?
Answer:
Because they have produced beyond their normal sale products such as coffee for Starbucks in other words they have found a other way to make more money.
Explanation:
pls mark brainliest
Which of the following statements generates the greatest amount of disagreement among economists? a. Increases in the money supply shift aggregate demand to the right. b. In the long run, increases in the money supply increase prices, but not output. c. Recessions are associated with decreases in consumption, investment, and employment. d. Government should use fiscal policy to try to stabilize the economy.
Answer:
d. Government should use fiscal policy to try to stabilize the economy.
Explanation:
Suggesting that the government should use fiscal policy to try to stabilize the economy generates the greatest amount of disagreement among economists because the process of implementing fiscal policy usually experiences lag as it is being slowed down by the political system (bureaucracy) of checks and balances.
Fiscal policy is the use of government expenditures, revenues and tax policies to influence macroeconomic conditions such as employment, inflation and Aggregate Demand (ADl in a specific country.
The benefits of fiscal policy is that investments, savings and growth is usually influenced in the long-run while it basically influences aggregate demand for goods and services in the short-run.
Check all true statements regarding CMBS:
a.CMBS have less exposure to prepayment risk than RMBS
b.Loans in a CMBS deal are recourse loans The multifamily/apartment CRE sector never uses CMBS for financing as it relies on RMBS
c.CMBS are the main source of financing for commercial real estate loans
d.The number of commercial mortgages in a CMBS deal are usually lower than the number of residential mortgage in a RMBS deal
Answer: A and D only
Explanation:
CMBS Loan are also referred to as a Conduit Loan, this is a type of real estate loan usually commercial, which is secured by a first-position mortgage on a commercial property. These loans are usually packaged, and sold by a Conduit Lender, commercial banks, investment banks, and syndicates of banks.
Loans in a CMBS are always bigger so they are less in a CMBS deal. Sometimes it’s onlyone loan in a Single Asset (SA) CMBS deal
Prepayments are discouraged in CMBS through defeasance,prepayment penalties or yield maintenance fees.
Answer:
a.CMBS have less exposure to prepayment risk than RMBS
d. The number of commercial mortgages in a CMBS deal are usually lower than the number of residential mortgage in a RMBS deal
Explanation:
Commercial Mortgage-Backed Securities (CMBS) as the name implies are mortgage backed securities that are secured with commercial mortgages while Residential Mortgage-Backed Securities (RMBS) are mortgage backed securities secured by residential property.
a) CMBS are based on mortgages which usually have a fixed term contract in place meaning that prepayment is less of a thing with CMBS than with RMBS so the former does indeed have a less exposure to prepayment risk than the latter.
d) This is indeed true because both packages have to look appealing to investors but can only use different amounts to reach the minimum threshold. This is because Commercial Mortgages pay more than Residential Mortgages so more RMBS have to be pulled together to form an attractive investment as opposed to CMBS. This is why the number in CMBS are usually less than that of RMBS.
In conducting the audit procedures for the search for unrecorded liabilities, the materiality/scope for this area was accessed by the auditors at $5,000. Adjustments are only recorded for individual items equal to or exceeding materiality. The company fiscal year end is December 31, 2019 and the last day of fieldwork is estimated to be February 1, 2020. Below is an item from the check/cash disbursement register, which is not recorded in the accounts payable subsidiary ledger at December 31, 2019. Daniel Breen, Esquire Check Number 1334 Check Date 1/6/2020 Amount $6,000 Nature of the Expenses: Corporate legal services for December 2019 Required: Determine if this check/cash disbursement is recorded in the proper accounting period. This transaction requires an accounting adjustment to the financial statements for the fiscal year ending 12/31/2019 - If you believe that statement is correct - answer "Yes" This transaction does NOT require an accounting adjustment to the financial statements for the fiscal year ending 12/31/2019 - If you believe that statement is correct - answer "No."
Answer:
"No."
This transaction does NOT require an accounting adjustment to the financial statements for the fiscal year ending 12/31/2019 - If you believe that statement is correct - answer "No."
Explanation:
The check disbursement does not require an adjustment to the financial statements for the fiscal year ending 12/31/2019, because the check is dated 1/6/2020.
Adjusting entries are changes to the journal entries which tries to match transactions to their correct accounting periods. A check dated January 6, 2020 does not belong to the fiscal year ending December, 2019.
Adjusting entries are usually for Accrued Revenue, Accrued Expenses, Deferred Revenue, Prepaid Expenses, and Depreciation Expenses.
g Based on the Keynesian model, one reason to support government spending increases over tax cuts as a tool for stimulating the economy is: Group of answer choices the government-spending multiplier is smaller than the tax multiplier. the government-spending multiplier is larger than the tax multiplier. tax cuts do not cause the budget deficit to increase. increases in government spending do not cause the budget deficit to increase.
Answer:
The answer is: The multiplier of public spending is greater than the tax multiplier.
Explanation:
Unemployment is caused by insufficient global demand. Therefore, to combat unemployment, aggregate demand (Da) will have to be increased, and for this, according to Keynes' formula, the following components must be acted on:
-Increase demand for consumer goods (C)
To stimulate consumption, taxes will have to be reduced, thus causing an increase in the disposable income of families.
-Increase the demand for investment goods (I)
This increase will be achieved by reducing the cost of money; in other words, lowering interest rates, thus encouraging companies to invest.
-Increase public sector demand (G)
It comes from the increase in public spending by the State (more roads, more hospitals).
-Increase the demand of international markets (X-M)
To promote exports, the exchange rate will have to be reduced. Increasing exports boosts domestic production.
g Smiley Corporation wholesales repair products to equipment manufacturers. On April 1, 20Y1, Smiley issued $20,000,000 of five-year, 9% bonds at a market (effective) interest rate of 8%, receiving cash of $20,811,010. Interest is payable semiannually on April 1 and October 1. a. Journalize the entry to record the issuance of bonds on April 1, 20Y1. If an amount box does not require an entry, leave it blank. b. Journalize the entry to record the first interest payment on October 1, 20Y1, and amortization of bond premium for six months, using the straight-line method. If an amount box does not require an entry, leave it blank. c. Why was the company able to issue the bonds for $20,811,010 rather than for the face amount of $20,000,000? The market rate of interest is the contract rate of interest.
Answer:
Explanation:
a
Cash 20811010
Bonds payable 20000000
Premium on Bonds payable 811010
b
Interest expense 818899
Premium on Bonds payable 81101 =811010/5*6/12
Cash 900000 =20000000*9%*6/12
c
The market rate of interest will be lower than the contract rate of interest.
A division is considering the acquisition of a new asset that will cost $2,950,000 and have a cash flow of $740,000 per year for each of the four years of its life. Depreciation is computed on a straight-line basis with no salvage value. Ignore taxes. Required: a. & b. What is the ROI for each year of the asset's life if the division uses beginning-of-year asset balances and net book value for the computation? What is the residual income each year if the cost of capital is 8 percent?
Answer and Explanation:
The computation of ROI for each year of the asset's life and residual income each year is shown below:-
Year Investment base ROI Residual income
1 $2,950,000 8% -$233,500
2 $2,212,500 11% -$233,500
3 $1,475,000 17% -$115,500
4 $737,500 34% -$56,500
ROI = Net income ÷ Total investment × 100
Net Income = Cash flow - Depreciation
Residual income = Net income - (Investment × Cost of capital)
Depreciation = Investment base ÷ 4 years
The return on investment and the residual income can be find out by using the excel spreadsheet. Kindly find it in the attachment
Foreman Mining purchased land containing a copper deposit for $2,640,000 on January 7, 2021. The company expects to mine 770,000 tons of copper over the next 10 years, and the land is expected to have a residual value of $1,408,000. The company has also purchased mining equipment for $570,000 that will be used only at this site over the 10 years with an estimated residual value of $54,100. By the end of the first year, the company has mined and sold 61,000 tons of copper. What is the cost attributed to copper inventory for 2021, assuming the company uses the units-of-production method?
Answer:
$138,470
Explanation:
cost of mine = $2,640,000
residual value of the land = $1,408,000
cost of equipment = $570,000
residual value = $54,100
it should contain 770,000 tons of copper
units of production depreciation method:
depreciation of mine = ($2,640,000 - $1,408,000) / 770,000 tons of copper = $1.60 per ton of copperdepreciation of equipment = ($570,000 - $54,100) / 770,000 tons of copper = $0.67 per ton of coppertotal depreciation per ton of copper = $1.60 + $0.67 = $2.27since 61,000 tons were extracted, then the depreciation expense = 61,000 x $2.27 = $138,470
As of December 31, 2019, Sheridan Company had $3500 of raw materials inventory. At the beginning of 2019, there was $3000 of materials on hand. During the year, the company purchased $315000 of materials; however, it paid for only $252500. How much inventory was requisitioned for use on jobs during 2019
Answer: $314,500
Explanation:
When calculating how much of a material of any sort was used, the following formula should be used,
= Beginning inventory + Purchases - Ending inventory
This is the same formula largely used to calculate Cost of Goods sold.
Here, the figure to be concerned about is the actual materials used not the ones paid for.
Plugging in figures into the formula then,
= 3,000 + 315,000 - 3,500
= $314,500
Thus $314,500 was the inventory requisitioned for use on jobs during 2019.
The following information will be used for 2 questions on this exam: Charlotte Corporation's management keeps track of the time it takes to process orders. During the most recent month, the following average times were recorded per order: Time spent between receipt of order and start of production 3.7 days Time spent ensuring quality levels 0.2 days Time spent working on the product 1.3 days Time spent transporting the product between work stations 0.8 days Time spent waiting to be worked on in the factory 6.9 days What is the throughput time?
Answer:
6.00 days
Explanation:
data provided
Inspection time = 3.7 days
Process time = 0.2 days
Move time = 1.3 days
Queue time = 0.8 days
The calculation of throughput time is given below:-
Throughput time = Inspection time + Process time + Move time + Queue time
= 3.7 days + 0.2 days + 1.3 days + 0.8 days
= 6.00 days
Here, we added the inspection time, process time , move time and queue time to reach at throughput time and we ignore the time spent waiting to be worked on in the factory as it is not relevant.
