The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.
To find the inverse of 55 modulo 89 using the Euclidean algorithm, the steps are:
1. 89 = 1.55 +34
2. 55 = 1.34 +21
3. 34 = 1.21 + 13
4. 21 = 1.13 + 8
5. 13 = 1.8 +5
6. 8 = 1.5 +3
7. 5 = 1.3 +2
8. 3 = 1.2 +1
9. 2 = 1.2
10. The Bézout coefficient of 55 is 34, and it is an inverse of 55 modulo 89.
11. The Bézout coefficients of 55 and 89 are 34 and -21, respectively.
12. The gcd in terms of 55 and 89 is written as 1 = 34-21.89 = 34-21. (55-1.34) = 13.34-21.55 = 13. (21-1.13) - 3.13 = 5.21-8. 13 = 5. (8-1.5) - 1.5 = 2.8-3.5 = 2. (3-1.2) = 2.3-1.5 = 2. (2-1) = 3-1.2 = 3-1. (1-0) = 34-21.89
The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.
To learn more about order refer :
https://brainly.com/question/15245131
#SPJ11
In square $ABCD$ with sides of length 4 cm, $N$ is the midpoint of side $BC$ and $M$ is the midpoint of side $CD$. What is the area of triangle $AMN$,
Consequently, the area of triangle $AMN$ is equal to $A = \frac{1}{2}bh = \frac{1}{2}(4)(2) = 4$ cm2.
The area of triangle $AMN$ in square $ABCD$ can be calculated using the formula for area of a triangle, $A = \frac{1}{2}bh$, where $b$ is the length of the base and $h$ is the height of the triangle.
Since side $BC$ has a length of 4 cm, we can determine that $N$ is located 2 cm away from point $B$ and 2 cm away from point $C$.
Similarly, we can conclude that $M$ is located 2 cm away from point $C$ and 2 cm away from point $D$.
Therefore, the base of triangle $AMN$ is equal to 4 cm, and the height of triangle $AMN$ is equal to 2 cm.
for such more questions on Consequently
https://brainly.com/question/26182883
#SPJ11
Which of the following steps were applied to ABC obtain AA'B'C'?
A. Shifted 4 units left and 4 units up
B. Shifted 4 units left and 2 units up
C. Shifted 2 units left and 4 units up
D. Shifted 2 units left and 2 units up
Correct Option is Shifted 2 units left and 4 units up
Define triangleA triangle is a geometric shape that is formed by three straight line segments that connect three non-collinear points. The three points where the segments intersect are called the vertices of the triangle, while the segments themselves are called the sides. The area enclosed by the sides of the triangle is called its interior, while the space outside the triangle is called its exterior.
Given are two trianglesThe vertices of ABC are (4, 6), (7, 6), and (5,9)
The transformed image A'B'C' has vertices as
(2,10) (5,10) (3,13)
We see a pattern when we compare the matching vertices.
The y coordinate is raised by 4, while the x coordinate is shrunk by 2.
This implies the transformation is
Shifted 2 units left and 4 units up
To know more about line, visit:
https://brainly.com/question/30003330
#SPJ1
Answer:
Shifted 2 units left and 4 units up
Step-by-step explanation:
hope this helps
true or false: when multiplying and dividing measurements, to determine the correct level of uncertainty of the solution i use measurement that is uncertain in the largest decimal place.
Answer:
Step-by-step explanation:
The answer is true
please answer the question in the photo (will mark brainliest + 15p)
we have
13x+6y=−30------------- > 6y=-30-13x--------------- > y=(-30-13x)/6
x−2y=−4-- > 2y=x+4-------- > y=(x+4)/2
Using a graphing tool---------- > see attached figure
the solution of the system is the point (-2.625,0688)
the best estimate pair for the solution to the system is (−2.5, 0.75)
The summaries of data from the balance sheet, income statement, and retained earnings statement for two corporations, Walco Corporation, and Gunther Enterprises, are presented below for 2017.
Determine the missing amounts. Assume all changes in stockholders equity are due to changes in retained earnings
Walco Corporation Gunther Enterprise
Beginning of year Total assets $100,000 $159,000
Total liabilities 73,000 $_____ (d)
Total stockholders' equity $_____ (a) 67,500
End of year Total assets $_____ (b) 190,000
Total liabilities 128,000 50,000
Total stockholders' equity 54,000 $_____ (e)
Changes during year in retained earnings Dividends $_____ (c) 4,900
Total revenues 219,000 $_____ (f)
Total expenses 167,000 79,000
The missing amounts for Walco Corporation and Gunther Enterprises assuming all changes in stockholders equity are due to changes in retained earnings are
(a) Walco Corporation Total Stockholders' Equity = $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues = $135,100
A balance sheet is a financial statement that reports a company's assets, liabilities, and stockholder equity on a specific date. Assets are resources a company owns that have monetary value, liabilities are obligations that must be paid in the future, and stockholder equity is the difference between a company's assets and liabilities. To calculate the missing amounts, you need to subtract the beginning of year figures from the end of year figures.
a) Total liabilities + Total stockholders' equity = Total assets
Total liabilities + $54,000 = $100,000
Total liabilities = $46,000
(b) Total assets = Total liabilities + Total stockholders' equity
Total assets = $128,000 + $54,000
Total assets = $182,000
(c) Changes during year in retained earnings = Total revenues - Total expenses - Dividends
Changes during year in retained earnings = $219,000 - $167,000 - $4,900
Changes during year in retained earnings = $47,100
The missing values for Gunther Enterprises:
(d) Total liabilities + Total stockholders' equity = Total assets
$67,500 + $(e) = $159,000
$(e) = $91,500
(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends
Changes during year in retained earnings = $(f) - $79,000 - $4,900
Changes during year in retained earnings = $(f) - $83,900
Using the balance sheet equation, we can find the missing values:
(d) Total liabilities = Total assets - Total stockholders' equity
Total liabilities = $159,000 - $67,500
Total liabilities = $91,500
(e) Total stockholders' equity = Total assets - Total liabilities
Total stockholders' equity = $190,000 - $50,000
Total stockholders' equity = $140,000
(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends
Changes during year in retained earnings = $219,000 - $79,000 - $4,900
Changes during year in retained earnings = $135,100
Therefore, the missing amounts are:
(a) Walco Corporation Total Stockholders' Equity = $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues = $135,100
To learn more about the 'balance sheet':
https://brainly.com/question/1113933
#SPJ11
Pls read ss
PLS HELPP
The slopes are,
1) 7/6
2)7/2
3) -1
4) -2
5) 10/9
What is slope?
Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.
1) The given points , [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (6,8)[/tex] then,
=> slope = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex] = [tex]\frac{8-1}{6-0} = \frac{7}{6}[/tex]
2) The given points [tex](x_1,y_1) =(-1,10)[/tex] and [tex](x_2,y_2) = (-5,-4)[/tex] then,
=> Slope = [tex]\frac{-4-10}{-5+1} = \frac{-14}{-4}=\frac{7}{2}[/tex]
3) The given points [tex](x_1,y_1) =(-10,2)[/tex] and [tex](x_2,y_2) = (-3,-5)[/tex] then,
=> slope = [tex]\frac{-5-2}{-3+10} = \frac{-7}{7}=-1[/tex]
4) The given points [tex](x_1,y_1) =(-3,-4)[/tex] and [tex](x_2,y_2) = (-1,-8)[/tex] then,
=> slope = [tex]\frac{-8+4}{-1+3} = \frac{-4}{2}=-2[/tex]
5)The given points [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (-9,-9)[/tex] then,
=> slope = [tex]\frac{-9-1}{-9+0} = \frac{-10}{-9}=\frac{10}{9}[/tex]
Hence the slopes are,
1) 7/6
2)7/2
3) -1
4) -2
5) 10/9
To learn more about slope refer the below link
https://brainly.com/question/16949303
#SPJ1
Math 4th 11-4 I need answers for 11-4 can you please help?
To make the table of 7, using the table of 4 and 3, we add the value of both table consecutively.
We have to make the table of 7, using table of 4 and 3.
As we know the table of 3 is:
3 6 9 12 15 18 21 24 27 30
As we know the table of 4 is:
4 8 12 16 20 24 28 32 36 40
To from the table of 7 using the table of 4 and 3 we add the consecutive value of both table respectively.
3 + 4 6 + 8 9 + 12 12 + 16 15 + 20 18 + 24 21 + 28 24 + 32 27 + 36 30+40
Now simplify
7 14 21 28 35 42 49 56 63 70
To learn more about addition link is here
brainly.com/question/29560851
#SPJ4
The complete question is:
Math 4th 11-4: Help bunty to make the table of 7, using table of 4 and 3.
Operación de vectores
Answer:
operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.
Answer:
operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.
Step-by-step explanation:
An automated car wash serves customers with the following serial process: pretreat, wash, rinse, wax, hand dry. Each of these steps is performed by a dedicated machine except for the hand-dry step, which is performed manually on each car by one of three workers. The steps of the process have the following processing times:
Pretreat: 2 minute per car
Wash: 7 minutes per car
Rinse: 1 minutes per car
Wax: 4 minutes per car
Hand dry: 6 minutes per car
Which resource is the bottleneck of this process? Round your answer to 2 decimal places. If the car wash has a demand of 14 cars per hour, what is the flow rate of the process? cut. customers per hour Round your answer to 2 decimal places. If the car wash has a demand of 14 cars per hour, what is the utilization of the machine that
The utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.
The bottleneck resource in this process is the hand-dry step, as it is the only step that is performed manually and thus has limited capacity. The processing time for the hand-dry step is 6 minutes per car, which is longer than any of the other steps.
To calculate the flow rate of the process, we need to determine the cycle time, which is the time it takes to process one car through all the steps. The cycle time is the sum of the processing times for all the steps, which is 2 + 7 + 1 + 4 + 6 = 20 minutes per car.
To convert this to customers per hour, we divide the number of minutes per hour (60) by the cycle time: 60 / 20 = 3 customers per hour.
Therefore, the flow rate of the process is 14 cars per hour x 3 customers per hour = 42 customers per hour.
To calculate the utilization of the machines, we need to calculate the total time that the machines are processing cars. Since all the steps except for the hand-dry step are performed by dedicated machines, the total processing time for the machines is 2 + 7 + 1 + 4 = 14 minutes per car.
Therefore, the utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.
For more questions like Machines click the link below:
https://brainly.com/question/30695896
#SPJ11
Write the expression in complete factored
form.
b2(p + 3) + q(P + 3) =
suppose point p divides the directed line segment xy so that the ratio of xp to py is 3 to 5 . describe point r that divides the directed line segment yx so that the ratio of yr to rx is 5 to 3 .a. R and P are the same pointb. Point R is halfway between point P and point Xc. The distance from point X is the same as the distance prom point P to point Yd. Point R is three fifths of the way from point P to point Y along PY
For point, p divides the directed line segment xy so that the ratio of xp to py is 3 to 5 correct option is d. Point R is three-fifths of the way from point P to point Y along PY.
The directed line segments divide a line into ratios, and each ratio has different properties. The properties of ratios of points on a line are dependent on the way the line is divided. For instance, suppose point p divides the directed line segment xy so that the ratio of xp to py is 3 to 5. We can describe point r that divides the directed line segment yx so that the ratio of yr to rx is 5 to 3 as follows:
We can solve this problem using the concept of directed line segments and the properties of ratios of points on a line.
Since P divides the directed line segment XY in the ratio 3:5, we can write:
XP = (3/8)XY and PY = (5/8)XY
Now, let's consider the directed line segment YX. We want to find a point R on this segment such that YR:RX = 5:3.
We can express YR and RX in terms of XY using the fact that YX = -XY:
YR = (5/8)YX and RX = (3/8)YX
Substituting -XY for YX, we get:
YR = (-5/8)XY and RX = (-3/8)XY
To find the location of point R, we need to find the distance from Y to R along the directed line segment YX. We can do this by adding the distances from Y to P and from P to R:
YR = YP + PR
Using the ratios we derived earlier, we can express YP and PR in terms of XY:
YP = PY = (5/8)XY
PR = R - P = (3/8)XY - (3/8)XY = 0
Therefore, YR = (5/8)XY + 0 = (5/8)XY
This means that point R is located at a distance of 5/8 of the length of YX from Y. So, the correct answer is (d) Point R is three-fifths of the way from point P to point Y along PY.
To know more about the "directed line segment": https://brainly.com/question/12959377
#SPJ11
What is an equation of the line that passes through the point (4,1) and is perpendicular to the line 2x-y= 4?
Answer:
Point-Slope Form: y - 1 = -1/2(x - 4) or Standard Form: y = -1/2x + 3
Step-by-step explanation:
For a line to be perpendicular, you take the negative inverse of the slope of 2x - y = 4. To do this, rearrange the y to one side and you get y = 2x - 4. The slope of the line is 2. So, taking the negative inverse would be -1/m (with m being slope of the the equation given in the problem. This would give you -1/2.
Using point slope formula, y - y1 = m(x - x1), you can plug in the point given, (4,1) and the slope you found to get y - 1 = -1/2(x - 4). For standard form, isolating the y gets you y = -1/2x + 3.
You can check your answer by using Desmos by putting in the line 2x - y = 4, the point (4,1), and the equation you got as your answer. You will see that the equation is perpendicular to 2x - y = 4 and passes through point (4,1). Your equation of the line is y - 1 = -1/2(x - 4) or y = -1/2x + 3
.......???????????????
Answer:
Step-by-step explanation:
[tex]x^2-5=-7x-1[/tex]
[tex]x^2+7x-5=-1[/tex] (subtracted 7x from both sides of the equation)
[tex]x^2+7x-4=0[/tex] (+1 both sides)
Use quadratic formula to solve for x:
[tex]x=\frac{-b \pm \sqrt{b^2 - 4ac} }{2a}[/tex] where [tex]a=1,b=7,c=-4[/tex]
[tex]=\frac{-7 \pm \sqrt{7^2 - 4\times1\times(-4)} }{2\times 1}[/tex]
[tex]=\frac{-7 \pm \sqrt{49 +16} }{2}[/tex]
[tex]=\frac{-7 \pm \sqrt{65} }{2}[/tex]
[tex]x=\frac{-7 +\sqrt{65} }{2},\frac{-7 - \sqrt{65} }{2}[/tex]
[tex]x=0.53,-7.53[/tex]
When calculating a confidence interval for the difference between two means proportions How do you determine whether or not the results indicate a significant difference?
The interval does not include the null hypothesis value, then the results are significant.
When calculating a confidence interval for the difference between two means or proportions, the significance level must be considered to determine whether the results suggest a significant difference.What is a confidence interval?A confidence interval (CI) is an interval estimate that quantifies the uncertainty associated with the unknown population parameter. Confidence intervals are used to express how confident we are about the accuracy of an estimated population parameter.The significance level is the level at which the results of a statistical test are considered statistically significant. The significance level is frequently represented as alpha, and its value is usually set to 0.05 (5%) in most statistical analyses. This implies that there is a 5% chance that the statistical test findings will indicate a significant difference when, in fact, there is no such difference. The significance level is the probability of rejecting a true null hypothesis.Therefore, in order to determine whether or not the results of a confidence interval for the difference between two means or proportions indicate a significant difference, we must compare the interval with the significance level (alpha) that was established before the test. If the interval contains the null hypothesis value (usually 0), then the results are not significant. If the interval does not include the null hypothesis value, then the results are significant.
Learn more about Hypothesis
brainly.com/question/20165896
#SPJ11
Is [tex]a^2(a-0.4)^3[/tex] completely factored?
The original question was to completely factor this:
[tex]a^5-0.064a^2[/tex]
Answer:
[tex]\bf a^2* (a - 0.4)(a^2 + 0.4a + 0.16)[/tex]
Step-by-step explanation:
Factorize:
First take out the common term a².
[tex]a^5 - 0.064a^2= a^2*(a^3 - 0.064)\\\\[/tex]
Now, factorize using the identity a³ - b³
a³ - b³ = (a - b) (a² + ab + b²)
[tex]a^2 * (a^2 - 0.064) = a^2 * (a^3 - 0.4^3)[/tex]
[tex]= a^2 * (a - 0.4) * (a^2 + a*0.4 + 0.4^2)\\\\=a^2 * (a - 0.4)(a^2 + 0.4a + 0.16)[/tex]
3
Each player on a softball team will get a uniform with a randomly selected
number between 1 and 30. No two players will have the same number.
The first player to get a uniform thinks the probability that she will
get a single-digit number is. Is the player correct? Explain
10
your reasoning.
30 percent chance
There are 30 possible numbers that a player can get on their uniform. Out of these, there are 9 single-digit numbers (1, 2, 3, 4, 5, 6, 7, 8, and 9) and 21 double-digit numbers (10, 11, 12, ..., 29, 30).
If no two players can have the same number, then the probability that the first player will get a single-digit number is simply the number of single-digit numbers divided by the total number of possible numbers:
P(single-digit number) = 9/30 = 0.3
So the player is correct that there is a 30% chance that she will get a single-digit number on her uniform.
Let A denote the balance at the end of Month n for each month where the balance is positive. To find a formula for An, we can do the following. For Month 1, note that A1 = 4000(1.015) - 100 For Month 2, note that A2 =[4000(1.015 ) – 100] (1.015) – 100
= 4000(1.015)^2 – 100 - 100(1.015) For Month 3, note that A3 = [4000(1.015)^2 - 100 - 100(1.015)] (1.015) - 100 = [4000(1.015)^3 - 100 - 100(1.015)] - 100(1.015)^2
B. (6 pts) (Formulas for An) i. Give a recursive formula for An. Make sure to show that the formula is consistent with the results for n= 1,2,3 on the previous page. ii. Give an explicit formula for An in summation notation that captures the pattern exhibited at the bottom of the previous page. Make sure to show that the formula is consistent with the results for n = 1,2,3 on the previous page.
(a) The recursive formula for An is: An = (1.015)An-1 - 100.
(b) The explicit formula for An in summation notation is: An = 4000(1.015)^n - 100[1 + (1.015) + (1.015)^2 + ... + (1.015)^(n-1)].
(a) This formula says that to find the balance for month n, we take the balance for month n-1, multiply it by 1.015 (to account for the interest rate), and subtract 100 (to account for the withdrawal). This formula is consistent with the results for n=1,2,3 on the previous page.
(b) The explicit formula for An in summation notation is: An = 4000(1.015)^n - 100[1 + (1.015) + (1.015)^2 + ... + (1.015)^(n-1)].
This formula says that to find the balance for month n, we take the starting balance of 4000 multiplied by the interest rate raised to the power of n, and then subtract the sum of 100 multiplied by the geometric series (1 + r + r^2 + ... + r^(n-1)), where r = 1.015. This formula is consistent with the results for n=1,2,3 on the previous page.
For more questions like Recursive formula click the link below:
https://brainly.com/question/8972906
#SPJ11
Suppose the heights of 18-year-old men are approximately normally distributed, with mean 71 inches and standard deviation 5 inches.
(a) What is the probability that an 18-year-old man selected at random is between 70 and 72 inches tall? (Round your answer to four decimal places.)
(b) If a random sample of eight 18-year-old men is selected, what is the probability that the mean height x is between 70 and 72 inches? (Round your answer to four decimal places.)
(c) Compare your answers to parts (a) and (b). Is the probability in part (b) much higher? Why would you expect this?
The probability in part (b) is much higher because the mean is larger for the x distribution.
The probability in part (b) is much higher because the standard deviation is smaller for the x distribution.
The probability in part (b) is much lower because the standard deviation is smaller for the x distribution.
The probability in part (b) is much higher because the mean is smaller for the x distribution.
The probability in part (b) is much higher because the standard deviation is larger for the x distribution.
The probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793 and the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057 and the probability in part (b) is much higher because the standard deviation is smaller for the x distribution.
What do you mean by normally distributed data?
In statistics, a normal distribution is a probability distribution of a continuous random variable. It is also known as a Gaussian distribution, named after the mathematician Carl Friedrich Gauss. The normal distribution is a symmetric, bell-shaped curve that is defined by its mean and standard deviation.
Data that is normally distributed follows the pattern of the normal distribution curve. In a normal distribution, the majority of the data is clustered around the mean, with progressively fewer data points further away from the mean. The mean, median, and mode are all the same in a perfectly normal distribution.
Calculating the given probabilities :
(a) The probability that an 18-year-old man selected at random is between 70 and 72 inches tall can be found by standardizing the values and using the standard normal distribution table. First, we find the z-scores for 70 and 72 inches:
[tex]z-1 = (70 - 71) / 5 = -0.2[/tex]
[tex]z-2 = (72 - 71) / 5 = 0.2[/tex]
Then, we use the table to find the area between these two z-scores:
[tex]P(-0.2 < Z < 0.2) = 0.0793[/tex]
So the probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793.
(b) The mean height of a sample of eight 18-year-old men can be considered a random variable with a normal distribution. The mean of this distribution will still be 71 inches, but the standard deviation will be smaller, equal to the population standard deviation divided by the square root of the sample size:
[tex]\sigma_x = \sigma / \sqrt{n} = 5 / \sqrt{8} \approx 1.7678[/tex]
To find the probability that the sample mean height is between 70 and 72 inches, we standardize the values using the sample standard deviation:
[tex]z_1 = (70 - 71) / (5 / \sqrt{8}) \approx -1.7889[/tex]
[tex]z_2 = (72 - 71) / (5 / \sqrt{8}) \approx 1.7889[/tex]
Then, we use the standard normal distribution table to find the area between these two z-scores:
[tex]P(-1.7889 < Z < 1.7889) \approx 0.9057[/tex]
So the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057.
(c) The probability in part (b) is much higher because the standard deviation is smaller for the x distribution. When we take a sample of eight individuals, the variability in their heights is reduced compared to the variability in the population as a whole. This reduction in variability results in a narrower distribution of sample means, with less probability in the tails and more probability around the mean. As a result, it becomes more likely that the sample mean falls within a given interval, such as between 70 and 72 inches.
To know more about normal distribution visit :
brainly.com/question/29509087
#SPJ1
what do you mean by arithmetic series?
Answer:
The sum of the first n terms in an arithmetic sequence is (n/2)⋅(a₁+aₙ). It is called the arithmetic series formula.
Step-by-step explanation:
An arithmetic series is the sum of the terms in an arithmetic sequence with a definite number of terms. Following is a simple formula for finding the sum: Formula 1: If S nrepresents the sum of an arithmetic sequence with terms , then. This formula requires the values of the first and last terms and the number of terms.
Please mark me as Brainliest if possible! Thank you :)
match each of the following concepts with its definition: estimator answer 1 a random variable that depends on the information in the sample. estimate answer 2 a specific value of a random variable that approximates an unknown parameter. unbiasedness answer 3 when the expected value of the estimator is equal to the population parameter. bias answer 4 the difference between the expected value of the estimator and the population parameter. most efficient estimator answer 5 an unbiased estimator that has the minimum variance. relative efficiency
A relative efficiency greater than 1 means that the estimator is less efficient than the most efficient estimator. A relative efficiency less than 1 means that the estimator is more efficient than the most efficient estimator.
Estimator: A random variable that depends on the information in the sample.Estimate: A specific value of a random variable that approximates an unknown parameter.Unbiasedness: When the expected value of the estimator is equal to the population parameter.Bias: The difference between the expected value of the estimator and the population parameter.Most Efficient Estimator: An unbiased estimator that has the minimum variance.Relative Efficiency: Relative efficiency is a measure of the efficiency of an estimator. It is a ratio of the variance of an estimator to the variance of the most efficient estimator. A relative efficiency of 1 means that the estimator is as efficient as the most efficient estimatorfor such more questions on relative efficiency
https://brainly.com/question/12475011
#SPJ11
What is the area of this figure?
6 mm
4 mm
3 mm
5 mm
3 mm
15 mm
3 mm
9 mm
Write your answer using decimals, if necessary. Square millimeters
Based on the given data, The shape's whole surface area is about 252 mm².
Based on the image, the shape appears to be a set of rectangles with different lengths and widths.
To find the area of this shape, we can break it down into smaller rectangles and add up their areas.
Starting from the bottom, we can see that the first rectangle has a length of 6 mm and a width of 4 mm. Its area is:
Area1
= 6 mm × 4 mm
= 24 mm²
Moving up to the second rectangle, we see that it has a length of 6 mm and a width of 3 mm. Its area is:
Area2
= 6 mm × 3 mm
= 18 mm²
The third rectangle has a length of 6 mm and a width of 5 mm. Its area is:
Area3
= 6 mm × 5 mm
= 30 mm²
The fourth rectangle has a length of 6 mm and a width of 3 mm. Its area is:
Area4
= 6 mm × 3 mm
= 18 mm²
The fifth rectangle has a length of 6 mm and a width of 15 mm. Its area is:
Area5
= 6 mm × 15 mm
= 90 mm²
The sixth rectangle has a length of 3 mm and a width of 9 mm. Its area is:
Area6
= 3 mm × 9 mm
= 27 mm²
Finally, the seventh rectangle has a length of 5 mm and a width of 9 mm. Its area is:
Area7
= 5 mm × 9 mm
= 45 mm²
To find the total area of the shape, we can add up the areas of all seven rectangles:
Total Area
= Area1 + Area2 + Area3 + Area4 + Area5 + Area6 + Area7
= 24 mm² + 18 mm² + 30 mm² + 18 mm² + 90 mm² + 27 mm² + 45 mm²
= 252 mm²
Therefore, the total area of the shape is approximately 252 mm².
To learn more about area click here
brainly.com/question/27683633
#SPJ4
Are the expressions -0.5(3x + 5) and
-1.5x + 2.5 equivalent? Explain why or why not.
These expression is not true .
What is a mathematical expression?
A mathematical expression is a sentence that consists of at least two numbers or variables, the expression itself, at least one arithmetic operation, and the expression itself. Any one of the following mathematical operations could be used: addition, subtraction, multiplication, or division.
For instance, the expression x + y is an expression with the addition operator placed between the terms x and y. Mathematicians utilize two different sorts of expressions: algebraic and numeric. Numeric expressions only contain numbers; algebraic expressions additionally incorporate variables.
-0.5(3x + 5) and -1.5x + 2.5 equivalent.
by distributing the 0.5 = -1.5x + 2.5
= -1.5x + 2.5
= 0.5(3*2 + 5 )
= - 1.5 * 2 + 2.5
= - 3 - 2.5 = -3 + 2.5
- 5. 5 = 0.5
this is not true. these expression is not true .
Learn more about expression
brainly.com/question/14083225
#SPJ1
An assignment of probabilities to events in a sample space must obey which of the following? They must obey the addition rule for disjoint events. They must sum to 1 when adding over all events in the sample space. The probability of any event must be a number between 0 and 1, inclusive. All of the above
An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.
What is probability?Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.
The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.
Learn more about Probability here: https://brainly.com/question/25839839
#SPJ11
a person pays $1 to play a certain game by rolling a single die once. if a 1 or 2 comes up, the person wins nothing. if, however, the player rolls a 3, 4, 5, or 6 he or she wins the difference between the number rolled and $1. find the expectation of this game. is the game fair?
A person pays $1 to play a certain game by rolling a single die once. if a 1 or 2 comes up, the person wins nothing. if, however, the player rolls a 3, 4, 5, or 6 he or she wins the difference between the number rolled and $1, this means that the game is not fair, based on the expected value
How do we determine the expected value of the game?We can see that the expected value of the game can be found by multiplying each payout by its probability of occurring and then summing up the results:Expected value = (0.2)($1) + (0.2)($1) + (0.2)($2) + (0.2)($3) + (0.2)($4) + (0.2)($0) + (0.2)($0)Expected value = $0.40 Since the expected value of the game is positive, it means that, over the long run, players are expected to make money on average. This means that the game is not fair.
See more about expected value at: https://brainly.com/question/14723169
#SPJ11
Find the equation of the line parallel to 2x + 5y = 10 which passes through (0,-3)
Answer: The given equation 2x + 5y = 10 can be rewritten in slope-intercept form (y = mx + b) by solving for y:
2x + 5y = 10
5y = -2x + 10
y = (-2/5)x + 2
where the slope is -2/5.
Since we want to find the equation of a line parallel to this one, the slope of the new line will also be -2/5. We can use the point-slope form of the equation of a line to find the equation of the new line, using the point (0,-3):
y - y1 = m(x - x1)
where m is the slope and (x1, y1) is the given point.
Substituting m = -2/5, x1 = 0, and y1 = -3, we get:
y - (-3) = (-2/5)(x - 0)
y + 3 = (-2/5)x
y = (-2/5)x - 3
Therefore, the equation of the line parallel to 2x + 5y = 10 which passes through (0,-3) is y = (-2/5)x - 3.
Step-by-step explanation:
Answer:
2x + 5y = - 15
Step-by-step explanation:
the equation of a line in slope- intercept form is
y = mx + c ( m is the slope and c the y- intercept )
given
2x + 5y = 10 ( subtract 2x from both sides )
5y = - 2x + 10 ( divide through by 5 )
y = - [tex]\frac{2}{5}[/tex] x + 2 ← in slope- intercept form
with slope m = - [tex]\frac{2}{5}[/tex]
• Parallel lines have equal slopes , then
y = - [tex]\frac{2}{5}[/tex] x + c
the line crosses the y- axis at (0, - 3 ) ⇒ c = - 3
y = - [tex]\frac{2}{5}[/tex] x - 3 ← equation of parallel line in slope- intercept form
multiply through by 5 to clear the fraction
5y = - 2x - 15 ( add 2x to both sides )
2x + 5y = - 15 ← in standard form
the expression when y=-6 y^2+8y-9
Answer:
-21
Step-by-step explanation:
y^2 + 8y - 9 y = -6
(-6)² + 8(-6) - 9
36 - 48 - 9
-21
So, the answer is -21
Answer:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}
Step-by-step explanation:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}
moore's law says that the number of transistors that can be placed inexpensively on a silicon chip doubles every two years. in $1990$, a typical cpu contained about $1,\!000,\!000$ transistors. according to moore's law, how many transistors did a typical cpu contain in the year $2000$?
According to Moore's Law, the number of transistors that can be placed inexpensively on a silicon chip doubles every two years, a typical CPU contained about 1,000,000 transistors in 1990.
What is the number of transistors in a typical CPU in the year 2000?Let’s first calculate the number of doublings from 1990 to 2000. Number of years from 1990 to 2000 = 2000 - 1990 = 10 yearsDoublings from 1990 to 2000 = [tex]$\dfrac{10 \text{ years}}{2 \text{ years per doubling}} = 5$[/tex] doublingsNow, we can calculate the number of transistors in a typical CPU in the year 2000:
[tex]$$\begin{aligned} \text{Number of transistors in 2000} &= \text{Number of transistors in 1990} \times 2^{\text{number of doublings}} \\ &= 1,\!000,\!000 \times 2^5 \\ &= 32,\!000,\!000 \end{aligned}$$[/tex]
Therefore, a typical CPU contained about 32,000,000 transistors in the year 2000.
See more about number of transistors at: https://brainly.com/question/29398026
#SPJ11
Write a quadratic equation that goes through the points (0,5), (2,1), and (1,2). y = ax^2 + bx + c
Abdul flips a weighted coin 64 times and gets 16 tails. Based on experimental probability how many of the next 40 flips should Abdul expect to come up tails?
Answer:
10
Step-by-step explanation:
Based on the given conditions, formulate: 40x16 divided by 64
Cross out the common factor: 40/4
Cross out common factor: 10
Get the result
Answer: 10
IN A BOX PLOT , IF THE MEDIAN IS TO THE LEFT OF THE CENTER OF THE BOX AND THE RIGHT WHISKER IS SUBSTANTIALLY LONGER THAN THE LET WHISKER, THE DISTRIBUTION IS SKEWED LEFT OR RIGHT?
The distribution is skewed to the right.
How to find distribution is skewed?If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.
This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.
The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.
Learn more about skewed distribution
brainly.com/question/1604092
#SPJ11
