A(n) _____ is a hydrocarbon in which one or more hydrogen atoms is replaced by a -COOH and a -NH2 group. aldehyde carboxylic acid alcohol amino acid

Answer:

400 cm³ of ammonia, NH₃.

Explanation:

The balanced equation for the reaction is given below:

N₂ + 3H₂ —> 2NH₃

From the balanced equation above,

3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.

Finally, we shall determine the maximum volume of ammonia, NH₃ produced from the reaction. This can be obtained as illustrated below:

From the balanced equation above,

3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.

Therefore, 600 cm³ of H₂ will react to produce = (600 × 2)/3 = 400 cm³ of NH₃.

Thus, 400 cm³ of ammonia, NH₃ were obtained from the reaction.

Answer:

6.88 × 10^-3mol

Explanation:

Molarity = number of moles (n) ÷ volume (V)

According to this question, there in 27.5 mL of 0.250 M KOH, the number of moles of KOH can, therefore, be calculated as follows:

number of moles = molarity × volume

Volume of KOH = 27.5mL = 27.5/1000

= 0.0275L

n = 0.0275 × 0.250

n = 0.006875 mol

n = 6.88 × 10^-3mol

In the compound Li2X, there are two lithium ions and one X^2- ion.

Ionic compounds are composed of an ion pair of opposite charge. Usually, the positive ion is a metal cation while the negative ion is a non metal anion. The two ions are held together by strong electrostatic interaction.

In the compound Li2X, there are two lithium ions and one X^2- ions. X^2 -is the  non metal anion present.

Learn more: https://brainly.com/question/2673886

Answer:

transition state is a point in which electrons been removed from the atom

Answer:

The highest energy structure in the reaction coordinate.

Explanation:

Answer:

Dekameter

Explanation:

Answer:

Phase C - Liquid State

Phase E - Gaseous State

Explanation:

Usually, in phases of water, we have the following;

When temperature is less than zero, it is said to be in its solid phase as ice.

When temperature is between 0 to 100, we can say it is in the liquid phase as water.

When temperature is above 100°C, It is said to be in the gaseous phase as vapour.

From the diagram;

Phase C is the only liquid state because it falls between temperature of 0°C and 100°

Also, only phase E is in the gaseous phase because the temperature is above 100°C.

Answer:

a. H2O: dihydrogen monoxide

b. PCl5: Phosphorus pentachloride

c. SiF4: Silicon tetrafluoride

d. N20: dinitrogen oxide

Answer:

Answer to the following question is as follows;

Explanation:

Alkynes' vapour pressure and normal boiling points are altered when chain length grows, since vapour pressure rises while boiling point falls.

Vapour pressure always include pressure entered by vapour with its condensed phase, pressure include molecules force of attraction include vapour

Answer:

Ron and Hermoine

Explanation:

They always fought over petty things, but at the end, they did end up together!

(Answer for your question about love and friendship being a central theme in Harry Potter and the Philosopher's stone)

*ALSO, MY ANSWER MIGHT BE WRONG* so be sure to use a pencil just in case!

Answer:

I think it is C

Explanation:

Hope this helps!! :)

If I'm wrong, then greatest apologies

Respuesta:

4.26 M; 12.8 N

Explicación:

Primer paso: Calcular la concentración volumétrica (Cv)

Usaremos la siguiente expression.

Cv = Cg × ρ

Cv = 30 g%g × 1.39 g/mL = 41.7 g%mL

Segundo paso: Calcular la molaridad

La concentración volumetrica es 41.7 g%mL, es decir, hay 41.7 gramos de soluto cada 100 mL de solución. Usaremos la siguiente fórmula para molaridad.

M = masa de soluto / masa molar de soluto × litros de solución

M = 41.7 g / 97.99 g/mol × 0.1 L = 4.26 M

Tercer paso: Calcular la normalidad

Usaremos la siguiente fórmula.

N = M × Z

donde Z para un ácido es igual al número de protones.

N = M × Z

N = 4.26 mol/L × 3 eq/mol = 12.8 N

Answer:

net ionic equation

[tex]\boxed{ SO_4{}^{2-} {}_{(aq.)} + Ba^{2+} {}_{(aq.)} \rightarrow BaSO_4 {}_{(s)}} [/tex]

Answer:

B a spring being stretched

Explanation:

a) The presence of sulfate ions in a solution can be confirmed by the reaction of barium chloride in an acidic medium.

The balanced chemical equation of the reaction is shown below:

[tex]BaCl_2(aq)+CuSO_4(aq)->CuCl_2(aq)+BaSO_4(s)[/tex]

Hence, the white precipitate is barium sulfate and its formation with the ionic equation is shown below:

[tex]Ba^2^+(aq)+SO_4^2^-(aq)->BaSO_4(aq)[/tex]

b) The presence of copper (II) ions can be confirmed by the following test:

Add potassium iodide solution to copper (II) solution.

Then a white ppt of cuprous iodide along with the liberation of iodine is observed and the entire solution attains brown color.

The chemical equation of the reaction is shown below:

[tex]2CuSO_4(aq)+4KI(aq)->Cu_2I_2(s)+I_2(s)+2K_2SO_4(aq)\\[/tex]

c)(i)Due to this reaction, the blue color of the solution becomes white.

Reddish-brown copper is deposited at the bottom of the container.

(ii)In this reaction, zinc is oxidized.

d) (i) Copper is produced at the cathode.

(ii)[tex]Cu^2^+(aq)+2e^-->Cu(s)[/tex]

(iii) The reaction that takes place at the cathode is reduction.

Reduction is gaining of electrons.

nobody can say it is uncertain but in my opinion it will grow quickly in the next 10 years

Answer:

hope this helps.answer is in the picture

Answer: i Choose the sun

because it has mass

Explanation: matter is anything that has mass and occupies space / Volume

and the sun has mass though it is not a solid one, and is made up of matter

HOPE THIS HELPSS!!!!

Answer:

The wavelength of the incoming photon is 172.8 nm

Explanation:

The wavelength of the incoming photon can be calculated with the photoelectric equation:

[tex] KE = h\frac{c}{\lambda_{p}} - \phi [/tex]   (1)

Where:

KE: is the kinetic energy of the electron

h: is Planck's constant = 6.62x10⁻³⁴ J.s  

c: is the speed of light = 3.00x10⁸ m/s

[tex]\lambda_{p}[/tex]: is the wavelength of the photon =?  

Φ: is the work function of the surface (Iron) = 4.5 eV        

The kinetic energy of the electron is given by:

[tex] KE = \frac{p^{2}}{2m} = \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} [/tex]  (2)

Where:  

p: is the linear momentum = h/λ

m: is the electron's mass = 9.1x10⁻³¹ kg

[tex]\lambda_{e}[/tex]: is the wavelength of the electron = 0.75 nm = 0.75x10⁻⁹ m

Hence, the wavelength of the photon is:

[tex] \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} = h\frac{c}{\lambda_{p}} - \phi [/tex]

[tex]\lambda_{p} = \frac{hc}{\frac{h^{2}}{2m\lambda_{e}^{2}} + \phi} = \frac{6.62 \cdot 10^{-34} J.s*3.00\cdot 10^{8} m/s}{\frac{(6.62 \cdot 10^{-34} J.s)^{2}}{2*9.1 \cdot 10^{-31} kg*(0.75 \cdot 10^{-9} m)^{2}} + 4.5 eV*\frac{1.602 \cdot 10^{-19} J}{1 eV}} = 1.728 \cdot 10^{-7} m = 172.8 nm[/tex]      

Therefore, the wavelength of the incoming photon is 172.8 nm.

I hope it helps you!        

Answer:

Option C. 11

Explanation:

We'll begin by calculating the concentration of the hydroxide ion [OH¯] in the solution. This can be obtained as follow:

In solution, KOH will dissociate as follow:

KOH (aq) <=> K⁺(aq) + OH¯(aq)

From the balanced equation above,

1 mole of KOH reacted to produce 1 mole of OH¯.

Therefore, 1×10¯³ M KOH will also react to produce 1×10¯³ M OH¯.

Thus, the concentration of hydroxide ion [OH¯] in the solution is 1×10¯³ M

Next, we shall determine the pOH of the solution. This can be obtained as follow:

Concentration of hydroxide ion [OH¯] = 1×10¯³ M

pOH =?

pOH = –Log [OH¯]

pOH = –Log 1×10¯³

pOH = 3

Finally, we shall determine the pH of the solution. This can be obtained as follow:

pOH = 3

pH =?

pH + pOH = 14

pH + 3 = 14

Collect like terms

pH = 14 – 3

pH = 11

Answer:

Coppell zinc,ironic bond

Explanation:

lt will give away two zinc atoms

Answer:

I will go with Sodium chlorine NaCl

Answer:

I don't know yr language

Answer:

64g of [tex]\bold{CH_{3}OH}\dashrightarrow[/tex]44.8L

vapour density of [tex]CH_{3}3OH=\frac{mass}{volume}[/tex] of [tex]\bold{CH_{3}OH}[/tex]

=64/44.8=10/7=1.43 g/l

Vapour density of [tex]\bold{CH_{3}OH}[/tex]=1.43g/l

64g of [tex]\bold{CH_{3}OH => 44.8L }[/tex]

vapour density of [tex]\small{\sf{CH_{3}3OH=\frac{mass}{volume} of } \bold{CH_{3}OH}}[/tex]

=64/44.8=10/7=1.43 g/l

Vapour density of [tex]\bold{CH_{3}OH = 1.43 g/L}[/tex]

Answer:

I hope this helps

Answer:

vahshahhsjajaiaoakkakakaaosos

Answer:

TIMED HELP ASAP

19.11 g of MgSO₄ is placed into 100.0 mL of water. The water's temperature increases by 6.70°C. Calculate ∆H, in kJ/mol, for the dissolution of MgSO₄. (The specific heat of water is 4.184 J/g･°C and the density of the water is 1.00 g/mL). You can assume that the specific heat of the solution is the same as that of water.

Answer:

-21.03 kJ/mol

Explanation:

∆H is enthalpy. Enthalpy is the total heat content of a system.

So we can establish that ∆H = q (heat)

The formula for heat (q)

q = cm∆T

c = specific heat capacity

m = mass of substance

∆T= change of temperature

Since we are calculating the enthalpy of the SOLUTION. We must account for both the mass of water and the mass of MgSO₄ in our q formula.

All you gotta do is plug and chug at this stage.

∆H = q     = cm∆T = (4.184)(19.11+100.0)(6.70) = 3338.986808 Joules

We have now calculated the heat (aka enthalpy) of the solution.

BUT

Remember! The problem asked for enthalpy in kj....

Use this conversion factor.

1000 J = 1 kJ

3338.986808 Joules * 1kJ/1000 J = 3.338986808 kJ

We were asked to find ∆H for the dissolution of MgSO4  in units of kj/mol so we are not finished.

Take the grams of MgSO4 in the problem  and convert it into moles using its molar mass.

MgSO4 molar mass = 120.3676 g

1 mol = 120.3676 g MgSO4   <---- Use this as a conversion factor

19.11 g MgSO4 * 1 mol MgSO4/120.3676 g = 0.15876365 mol MgSO4

Now that you've calculated the moles of MgSO4 in this solution. You can divide your heat by it.

q dissolution = 3.338.986808 kJ/ 0.15876365 mol =  21.03 kj/mol

Note that the problem tells us that the temperature of water increases.

This means that the water is experiencing an endothermic process (heat is being absorbed from MgSO4) . Mathematically, this would be indicated by a positive sign. ---> +q

We can assume MgSO4 is losing heat as it is placed into the water. It is experiencing an exothermic process (heat is being lost).  Mathematically, this would be indicated by a negative sign. ----> -q

So if we're calculating the enthalpy for the dissolution of MgSO₄ ....the value we've arrived at must be negative.

Answer

∆H = 21.03 kj/mol :)))))

I hope that helped...I feel like my explanation was a bit convoluted.

Answer: B. forests are carbon sinks because they store carbon

Explanation:forests take up carbon from the atmosphere through photosynthesis and from organic matter through decomposition. so, forests are carbon sinks because they store carbon