Answer:
C $0.75 my friend I wish it is right answer
A fish is 80 cm below the surface of a pond. What is the apparent depth (in cm) when viewed from a position almost directly above the fish
Answer:
Apparent depth (Da) = 60.15 cm (Approx)
Explanation:
Given:
Distance from fish (D) = 80 cm
Find:
Apparent depth (Da)
Computation:
We know that,
Refractive index of water (n2) = 1.33
So,
Apparent depth (Da) = D(n1/n2)
Apparent depth (Da) = 80 (1/1.33)
Apparent depth (Da) = 60.15 cm (Approx)
The apparent depth of the fish is 60 cm.
To calculate the apparent depth of the fish, we use the formula below.
Formula:
R.F(water) = Real depth(D)/Apparent depth(D')R.F = D/D'.................... Equation 1Where:
R.F = Refractive index of waterMake D' The subject of the equation.
D' = D/R.F................... Equation 2From the question,
Given:
D = 80 cmR.F = 1.333Substitute these values into equation 2
D' = 80/1.33D' = 60.01D' = 60 cmHence, the apparent depth of the fish is 60 cm
Learn more about apparent depth here: https://brainly.com/question/24319677
An earthquake emits both S-waves and P-waves which travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave travels at 5 000 m/s. If P-waves are received at a seismic station 1.00 minute before an S-wave arrives, how far away is the earthquake center?
Assuming constant speeds, the P-wave covers a distance d in time t such that
9000 m/s = d/(60 t)
while the S-wave covers the same distance after 1 more minute so that
5000 m/s = d/(60(t + 1))
Now,
d = 540,000 t
d = 300,000(t + 1) = 300,000 t + 300,000
Solve for t in the first equation and substitute it into the second equation, then solve for d :
t = d/540,000
d = 300,000/540,000 d + 300,000
4/9 d = 300,000
d = 675,000
So the earthquake center is 675,000 m away from the seismic station.
A thick wire with a radius of 4.0 mm carries a uniform electric current of 1.0 A, distributed uniformly over its cross-section. At what distance from the axis of the wire, and greater than the radius of the wire, is the magnetic field strength equal to that at a distance 2.0 mm from the axis. distance
Answer:
8 mm
Explanation:
From the information given:
The Ampere circuital law can be used to estimate the magnetic field strength at two points when the distance is less than the radius and when the distance is greater than the radius.
when the distance is less than the radius ; we have:
[tex]B_1 = \dfrac{ \mu_o \times I \times r}{2 \times \pi \times \ d^2}[/tex]
when the distance is greater than the radius; we have:
[tex]B_2 = \dfrac{\mu_o \ \times I}{2 \ \times \pi \times R}[/tex]
Equating both equations together ; we have :
[tex]\dfrac{ \mu_o \times I \times r}{2 \times \pi \times \ d^2} = \dfrac{\mu_o \ \times I}{2 \ \times \pi \times R}[/tex]
[tex]\dfrac{1}{R}= \dfrac{r}{d^2}[/tex]
[tex]R= \dfrac{d^2}{r}[/tex]
where; d = radius of the wire and r = distance;
[tex]R =\dfrac{4^2}{2}[/tex]
[tex]R =\dfrac{16}{2}[/tex]
R = 8 mm
An object is inside a room that has a constant temperature of 289 K. Via radiation, the object emits three times as much power as it absorbs from the room. What is the temperature (in kelvins) of the object
Answer:
T_object = 380.35 K
Explanation:
From Stefan–Boltzmann law, the power output is given by the formula:
P = σAT⁴
where;
σ is Stefan-Boltzmann constant
A is area of the radiating surface.
T is temperature of the body
Now, we are told that the power the object emitted is 3 times the power absorbed from the room.
Thus, we have;
P_e = 3P_a
Where P_e is power emitted and P_a is power absorbed.
So, we have;
σA(T_object)⁴ = 3σA (T_room)⁴
σA will cancel out to give;
(T_object)⁴ = 3(T_room)⁴
We are given T_room = 289 K
Thus;
(T_object)⁴ = 3 × 289⁴
(T_object) = ∜(3 × 289⁴)
T_object = 380.35 K
during the course of songraphic exam, you notice lateral splaying of echoes in the far field. what can you do to improve the image
Answer:
lateral splaying of echoes in the far field can be improved by Increasing the maximum number of transmit focal zones and optimize their location.
Please help!
Much appreciated!
Answer:
F = 2.7×10¯⁶ N.
Explanation:
From the question given:
F = (9×10⁹ Nm/C²) (3.2×10¯⁹ C × 9.6×10¯⁹ C) /(0.32)²
Thus we can obtain the value value of F by carrying the operation as follow:
F = (9×10⁹) (3.2×10¯⁹ × 9.6×10¯⁹) /(0.32)²
F = 2.7648×10¯⁷ / 0.1024
F = 2.7×10¯⁶ N.
Therefore, the value of F is 2.7×10¯⁶ N.
What is the force that attracts objects with mass toward each other?
Explanation:
gravitional force attracts objects with mass toward each other.
The positron has the same mass as an electron, with an electric charge of +e. A positron follows a uniform circular motion of radius 5.03 mm due to the force of a uniform magnetic field of 0.85 T. How many complete revolutions does the positron perform If it spends 2.30 s inside the field? (electron mass = 9.11 x 10-31 kg, electron charge = -1.6 x 10-19 C)
Answer:
5.465 × 10^10 revolutions
Explanation:
Formula for Magnetic Field = m. v/ q . r
M = mass of electron = mass of positron = 9.11 x 10^-31 kg,
radius of the positron = 5.03 mm
We convert to meters.
1000mm = 1m
5.03mm = xm
Cross multiply
x = 5.03/1000mm
x = 0.00503m
q = Electric charge = -1.6 x 10^-19 C
Magnetic field (B) = 0.85 T
Speed of the positron is unknown
0.85 = 9.11 x 10^-31 kg × v/ -1.6 x 10^-19 C × 0.00503
0.85 × 1.6 x 10^-19 C × 0.00503 = 9.11 x 10^-31 kg × v
v = 0.85 × -1.6 x 10^-19 C × 0.00503/9.11 x 10^-31 kg
v = 6.8408 ×10-22/ 9.11 x 10^-31 kg
v = 750911086.72m/s
Formula for complete revolutions =
Speed × time / Circumference
Time = 2.30s
Circumference of the circular path = 2πr
r =0.00503
Circumference = 2 × π × 0.00503
= 0.0316044221
Revolution = 750911086.72 × 2.30/0.0316044221
= 1727095499.5/0.0316044221
= 546541562294 revolutions
Approximately = 5.465 × 10^10 revolutions
When light of wavelength 233 nm shines on a metal surface the maximum kinetic energy of the photoelectrons is 1.98 eV. What is the maximum wavelength (in nm) of light that will produce photoelectrons from this surface
Answer:
λmax = 372 nm
Explanation:
First we find the energy of photon:
E = hc/λ
where,
E = Energy of Photon = ?
λ = Wavelength of Light = 233 nm = 2.33 x 10⁻⁷ m
c = speed of light = 3 x 10⁸ m/s
h = Planks Constant = 6.626 x 10⁻³⁴ J.s
Therefore,
E = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(2.33 x 10⁻⁷ m)
E = 8.5 x 10⁻¹⁹ J
Now, from Einstein's Photoelectric Equation:
E = Work Function + Kinetic Energy
8.5 x 10⁻¹⁹ J = Work Function + (1.98 eV)(1.6 x 10⁻¹⁹ J/1 eV)
Work Function = 8.5 x 10⁻¹⁹ J - 3.168 x 10⁻¹⁹ J
Work Function = 5.332 x 10⁻¹⁹ J
Since, work function is the minimum amount of energy required to emit electron. Therefore:
Work Function = hc/λmax
λmax = hc/Work Function
where,
λmax = maximum wavelength of light that will produce photoelectrons = ?
Therefore,
λmax = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(5.332 x 10⁻¹⁹ J)
λmax = 3.72 x 10⁻⁷ m
λmax = 372 nm
Calculate the focal length (in m) of the mirror formed by the shiny bottom of a spoon that has a 3.40 cm radius of curvature. m (b) What is its power in diopters? D
Answer:
The power of the mirror in diopters is 58.8 D
Explanation:
Given;
radius of curvature of the spoon, R = 3.4 cm = 0.034 m
The focal length of a mirror is given by;
[tex]f = \frac{R}{2} \\\\f = \frac{0.034}{2} \\\\f = 0.017 \ m[/tex]
The focal length of the mirror is 0.017 m
(b) The power of the mirror is given by;
[tex]P = \frac{1}{f}[/tex]
where;
P is the power of the mirror
f is the focal length
[tex]P = \frac{1}{f}\\\\P= \frac{1}{0.017}\\\\P = 58.8 \ D[/tex]
Thus, the power of the mirror in diopters is 58.8 D
A planar electromagnetic wave is propagating in the x direction. At a certain point P and at a given instant, the magnitude of the electric field of the wave is 0.082 V/m . What is the magnetic vector of the wave at point P at that instant?
A) (0.27 nT)k
B) (-0.27 nT)k
C) (0.27 nTİ
D) (6.8 nT)k
E) (-6.8 nT))
Answer:
b
Explanation:
A brick is resting on a smooth wooden board that is at a 30° angle. What is one way to overcome the static friction that is holding the brick in place?Please help i will give brainliest!!!! lower the board so it's level with the ground ____ roughen up the texture of the wooden board ___ raise the board to a higher angle ____ press down on the brick in a direction that is perpendicular to the board _____
Answer:
to overcome the out of friction we must increase the angle of the plane
Explanation:
To answer this exercise, let's propose the solution of the problem, write Newton's second law. We define a coordinate system where the x axis is parallel to the plane and the other axis is perpendicular to the plane.
X axis
fr - Wₓ = m a (1)
Y axis
N- [tex]W_{y}[/tex] = 0
N = W_{y}
let's use trigonometry to find the components of the weight
sin θ = Wₓ / W
cos θ = W_{y} / W
Wₓ = W sin θ
W_{y} = W cos θ
the friction force has the formula
fr = μ N
fr = μ Wy
fr = μ mg cos θ
from equation 1
at the point where the force equals the maximum friction force
in this case the block is still still so a = 0
F = fr
F = (μ mg) cos θ
We can see that the quantities in parentheses with constants, so as the angle increases, the applied force must be less.
This is the force that balances the friction force, any force slightly greater than F initiates the movement.
Consequently, to overcome the out of friction we must increase the angle of the plane
the correct answer is to increase the angle of the plane
Which statement about friction is true? (1 point)
o
Static friction and kinetic friction in a system always act in opposite directions of each other and in the same direction as the
applied force
Static friction and kinetic friction in a system always act in the same direction as each other and in the opposite direction of the
applied force
Static friction and kinetic friction in a system always act in opposite directions of each other and in the opposite direction of the
applied force
O
Static friction and kinetic friction in a system always act in the same direction as each other and in the same direction as the
applied force.
Answer:static friction and kinetic friction in a system always act in the same direction as each other and n the opposite direction of the applie force . Is the correct answer
Explanation:
Static friction and kinetic friction in a system always act in the same direction as each other and in the opposite direction of the applied force. The correct option is B.
What is friction?Friction is the force that prevents one hard material from scooting or rolling over the other.
Frictional forces, such as the locomotion required to walk without dropping, are advantageous, but they also create a significant amount of resistance to motion.
We can control cars because of friction between the tires and the road: more precisely, because there are three types of friction: rolling friction, starting friction, and sliding friction.
Friction reduces the speed of moving objects and can even stop them from moving. The friction between the objects generates heat. As a result, energy is wasted in the machines. Friction will cause wear and tear on the machine parts.
In a system, static and kinetic friction always act in the same direction and in the opposite direction of the applied force.
Thus, the correct option is B.
For more details regarding friction, visit:
https://brainly.com/question/28356847
#SPJ2
Based on The MOHS hardness Scale, which mineral could be scratched by a penny but not by a fingernail
A. Fluorite
B. Calcite
C. Gypsum
D. Talc
The correct answer is B. Calcite
Explanation:
Mohs hardness scale indicates the hardness of minerals using a scale from 1 to 10 as well as defining the objects or tools that can be used to scratch the minerals. These two features of minerals are shown in the table of the image. About this, it is shown gypsum and talc can be scratched by just a fingernail, considering minerals with a hardness of 2.5 or below can be scratched by a fingernail. In the case of calcite that has a hardness of 3, this cannot be scratched by a fingernail, but it can be scratched by a penny, which works for minerals with a hardness of 3.5 or below. Thus, the correct answer is Calcite.
Consult Interactive Solution 27.18 to review a model for solving this problem. A film of oil lies on wet pavement. The refractive index of the oil exceeds that of the water. The film has the minimum nonzero thickness such that it appears dark due to destructive interference when viewed in visible light with wavelength 653 nm in vacuum. Assuming that the visible spectrum extends from 380 to 750 nm, what is the longest visible wavelength (in vacuum) for which the film will appear bright due to constructive interference
Answer:
Explanation:
In the given case for destructive interference , the condition is,
path difference = (2n+1)λ /2 where n is an integer and λ is wavelength
2 μ d = (2n+1)λ /2
Putting λ = 653 nm
for minimum thickness n = 0
2 μ d = 653 / 2 nm
= 326.5 nm
For constructive interference the condition is
2 μ d = n λ₁
326.5 nm = n λ₁
λ₁ = 326.5 / n
For n = 1
λ₁ = 326.5 nm ,
or , 326.5nm .
Longest wavelength possible is 326.5
To a person swimming 0.80 m below the water surface of a swimming pool, the diving board directly overhead appears to be a height of 5.20 m above the swimmer. What is the actual height of the diving board above the water surface
Answer:
The actual height is 3.308 m.
Explanation:
The person is swimming below the water surface at distance = 0.80 m
The height of the diving board appears at a distance or height = 5.20 m
Now we have to find the actual distance of the diving board from the water surface.
We know the refractive index of water is 1.33.
Therefore, the actual height = (Distance that appears – distance below the water surface) / Refractive index.
The actual height = ( 5.20 - 0.80 ) / 1.33 = 3.308 m
Monochromatic light is incident on a pair of slits that are separated by 0.220 mm. The screen is 2.60 m away from the slits. (Assume the small-angle approximation is valid here.)
(a) If the distance between the central bright fringe and either of the adjacent bright fringes is 1.97 cm, find the wavelength of the incident light.
(b) At what angle does the next set of bright fringes appear?
Answer:
a
[tex]\lambda = 1.667 nm[/tex]
b
[tex]\theta = 0.8681^o[/tex]
Explanation:
From the question we are told that
The distance of separation is [tex]d = 0.220 \ mm = 0.00022 \ m[/tex]
The is distance of the screen from the slit is [tex]D = 2.60 \ m[/tex]
The distance between the central bright fringe and either of the adjacent bright [tex]y = 1.97 cm = 1.97 *10^{-2}\ m[/tex]
Generally the condition for constructive interference is
[tex]d sin \tha(\theta ) = n \lambda[/tex]
From the question we are told that small-angle approximation is valid here.
So [tex]sin (\theta ) = \theta[/tex]
=> [tex]d \theta = n \lambda[/tex]
=> [tex]\theta = \frac{n * \lambda }{d }[/tex]
Here n is the order of maxima and the value is n = 1 because we are considering the central bright fringe and either of the adjacent bright fringes
Generally the distance between the central bright fringe and either of the adjacent bright is mathematically represented as
[tex]y = D * sin (\theta )[/tex]
From the question we are told that small-angle approximation is valid here.
So
[tex]y = D * \theta[/tex]
=> [tex]\theta = \frac{ y}{D}[/tex]
So
[tex]\frac{n * \lambda }{d } = \frac{y}{D}[/tex]
[tex]\lambda =\frac{d * y }{n * D}[/tex]
substituting values
[tex]\lambda = \frac{0.00022 * 1.97*10^{-2} }{1 * 2.60 }[/tex]
[tex]\lambda = 1.667 *10^{-6}[/tex]
[tex]\lambda = 1.667 nm[/tex]
In the b part of the question we are considering the next set of bright fringe so n= 2
Hence
[tex]dsin (\theta ) = n \lambda[/tex]
[tex]\theta = sin^{-1}[\frac{ n * \lambda }{d} ][/tex]
[tex]\theta = sin^{-1}[\frac{ 2 * 1667 *10^{-9}}{ 0.00022} ][/tex]
[tex]\theta = 0.8681^o[/tex]
g When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel 3.2 10-15 m before interacting. From this information, find the time interval required for the strong interaction to occur.
Answer:
Time, [tex]t=1.07\times 10^{-23}\ s[/tex]
Explanation:
Given that,
When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel [tex]3.2\times 10^{-15}\ m[/tex] before interacting.
Let t is the time interval required for the strong interaction to occur. It will move with the speed of light. So,
[tex]t=\dfrac{d}{c}\\\\t=\dfrac{3.2\times 10^{-15}}{3\times 10^8}\\\\t=1.07\times 10^{-23}\ s[/tex]
So, the time interval is [tex]1.07\times 10^{-23}\ s[/tex]
A green light is submerged 2.70 m beneath the surface of a liquid with an index of refraction 1.31. What is the radius of the circle from which light escapes from the liquid into the air above the surface
Answer:
The radius is [tex]r = 3.1905 \ m[/tex]
Explanation:
From the question we are told that
The distance beneath the liquid is [tex]d = 2.70 \ m[/tex]
The refractive index of the liquid is [tex]n_i = 1.31[/tex]
Now the critical value is mathematically represented as
[tex]\theta = sin ^{-1} [\frac{1}{n_i} ][/tex]
substituting values
[tex]\theta = sin ^{-1} [\frac{1}{131} ][/tex]
[tex]\theta = 49.76^o[/tex]
Using SOHCAHTOA rule we have that
[tex]tan \theta = \frac{ r}{d}[/tex]
=> [tex]r = d * tan \theta[/tex]
substituting values
[tex]r = 2.7 * tan (49.76)[/tex]
[tex]r = 3.1905 \ m[/tex]
An electrostatic paint sprayer contains a metal sphere at an electric potential of 25.0 kV with respect to an electrically grounded object. Positively charged paint droplets are repelled away from the paint sprayer's positively charged sphere and towards the grounded object. What charge must a 0.168-mg drop of paint have so that it will arrive at the object with a speed of 18.8 m/s
Answer:
The charge is [tex]Q = 2.177 *10^{-9} \ C[/tex]
Explanation:
From the question we are told that
The electric potential is [tex]V = 25.0 \ kV = 25.0 *10^{3}\ V[/tex]
The mass of the drop is [tex]m = 0.168 \ m g = 0.168 *10^{-3} \ g = 0.168 *10^{-6}\ kg[/tex]
The speed is [tex]v = 18.8 \ m/s[/tex]
Generally the charge on the paint drop due to the electric potential which will give it the speed stated in the question is mathematically represented as
[tex]Q = \frac{m v^2 }{ 2 * V }[/tex]
Substituting values
[tex]Q = \frac{0.168 *10^{-6} (18)^2 }{ 2 * 25*10^3 }[/tex]
[tex]Q = 2.177 *10^{-9} \ C[/tex]
How would the interference pattern change for this experiment if a. the grating was moved twice as far from the screen and b. the line density of the grating were doubled?
Answer:
a) the distance between the interference fringes is reduced by half
b) the distance between stripes is doubled
Explanation:
Interference experiments constructive interference is described by the expression
d sin θ = m λ
let's use trigonometry to find the distance between the interference fringes
tan θ= y / L
dodne y is the distance from the central maximum, L the distance from the slit to the observation screen. In general these experiments are carried out at very small angles
tan θ = sin θ / cos θ = sin θ
we substitute
sin θ = y / L
d y / L = m λ
y = m λ / d L
a) it asks us when the screen doubles its distance
L ’= 2 L
subtitute in the equation
y ’= m λ / (d 2L)
y ’=( m λ / d L) /2
y ’= y / 2
the distance between the interference fringes is reduced by half
b) the density of the network doubles
if the density doubles in the same distance there are twice as many slits, so the distance between them is reduced by half
d ’= d / 2
we substitute
y ’= m λ (L d / 2)
y ’= m λ / (L d) 2
y ’= y 2
the distance between stripes is doubled
what effect does decreasing the field current below its nominal value have on the speed versus voltage characteristic of a separately excited dc motor
Answer
The effect is that it Decreases the field current IF and increases slope K1
For an object to move, a(n) _______ force must be applied. Question 1 options: Balanced Unbalanced
Answer:
Unbalenced
Explanation:
when balenced forces are applied to an object there is no motion. When you apply unbalenced force the object you are applying the force to will move in the opposite direction of the force.
Answer:
im pretty sure it unbalenced
Explanation:
i just am
Rank the ultraviolet, infrared, and visible regions of theelectromagnetic spectrum in terms of lowest to highest energy,frequency, and wavelength.
Energy: < <
Frequency: < <
Wavelength: <
Answer:
1. Energy: ultraviolet>> visible> infrared
2. Frequency: ultraviolet>> visible > infrared
3. Wavelength: infrared >> visible > ultraviolet
Explanation:
Electromagnetic waves are a class of waves that do not require material medium for their propagation, and travel at the same speed. They are arranged with respect to either their decreasing wavelength or increasing frequency to form a spectrum called an electromagnetic spectrum.
Comparing the energy, frequency and wavelength of ultraviolet, infrared and visible regions, it can be deduced that:
1. Energy: ultraviolet has the highest energy, then followed by visible, and infrared has the lowest energy.
i.e energy: ultraviolet>> visible> infrared
2. Frequency: ultraviolet radiation has the highest frequency, visible region has a greater frequency than that of infrared.
i.e frequency: ultraviolet>> visible > infrared
3. Wavelength: infrared radiation has the highest wavelength, followed by visible region, and ultraviolet radiation has the lowest wavelength.
i.e wavelength: infrared >> visible > ultraviolet
In terms of lowest to the highest energy,frequency, and wavelength is;
Energy: infrared > visible light > ultraviolet
Frequency: infrared > visible light > ultraviolet
Wavelength: ultraviolet > visible light > infrared
The electromagnetic spectrum:
The electromagnetic spectrum is made up of all the electromagnetic waves (ultraviolet, infrared, and visible) arranged according to their energy,frequency, and wavelength.
The ultraviolet: This wave is seen in the sunlight and is made up of wavelength of 10nm to 400nm. A frequency of [tex]10^{16}[/tex](Hz).Infrared wave: They are invisisble to the human eye but can be felt as heat. It has frequency of [tex]10^{12}[/tex]Hz and a wavelength of 780nm to 1mm.Visible light: This is part of the electromagnetic wave that the eye can view. It has frequency of [tex]10^{15}[/tex]Hz and a wavelength of 380 to 700nm.Learn more about electromagnetic spectrum here:
https://brainly.com/question/13803241
A fish in an aquarium with flat sides looks out at a hungry cat. To the fish, does the distance to the cat appear to be less than the actual distance, the same as the actual distance, or more than the actual distance? Explain.
Answer:
p = -q
he distance is equal to the current distance, so the distance does not change
Explanation:
For this exercise we can solve it using the equation of the constructor
1 / f = 1 / p + 1 / q
where f is the focal length, p the distance to the object and q the distance to the image
For a flat surface the radius is at infinity, therefore 1 / f = 0, which implies
1 / p = - 1 / q
p = -q
Therefore the distance is equal to the current distance, so the distance does not change
The magnetic field at the center of a 1 cm diameter loop is 2.5 mT. If a long straight wire carries the same current as the loop of wire, at what distance from the wire is the magnetic field 2.5 mT? A. 0.10 m B. 1.6x10-3 m C. 0.01 m D. 20 m
Answer:
B. 1.6 x 10⁻³ m
Explanation:
The magnetic field at the center of the loop is given by;
[tex]B = \frac{\mu_o I }{2R}[/tex]
Where;
μ₀ is the permeability of free space
I is the current in the loop
R is the radius of the circular loop
B is the magnetic field
Given;
diameter of the loop = 1cm
radius of the loop, r = 0.5 cm = 0.005 m
magnetic field, B = 2.5mT = 2.5 x 10⁻³ T
The current in the loop is calculated as;
[tex]I = \frac{2BR}{\mu_o} \\\\I = \frac{2*2.5*10^{-3}*0.005}{4\pi*10^{-7}} \\\\I = 19.89 \ A[/tex]
The magnetic at a distance from the long straight wire is calculated as;
[tex]B = \frac{\mu_o I}{2\pi d}[/tex]
where;
d is the distance from the wire;
[tex]d = \frac{\mu_o I}{2\pi B} \\\\d = \frac{4\pi *10^{-7} * 19.89}{2\pi *2.5*10^{-3}} \\\\d = 1.6 *10^{-3} \ m[/tex]
Therefore, the distance from the wire where the magnetic field is 2.5 mT is 1.6 x 10⁻³ m.
B. 1.6 x 10⁻³ m
This question involves the concepts of the magnetic field due to a loop and a current-carrying wire and current.
A long straight wire carrying the same current as the loop of wire has a magnetic field of 2.5 mT at a distance of b "B. 1.5 x 10⁻³ m".
The magnetic field at the center of a loop of wire is given by the following formula:
[tex]B=\frac{\mu_o I}{2r}[/tex]
where,
B = Magnetic Field = 2.5 mT = 2.5 x 10⁻³ T
μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²
I = current = ?
r = radius = diameter/2 = 1 cm/2 = 0.5 cm = 0.005 m
Therefore,
[tex]I = \frac{(2.5\ x\ 10^{-3}\ T)(2)(0.005\ m)}{4\pi\ x\ 10^{-7}\ N/A^2}[/tex]
I = 19.9 A
Now, the magnetic field at a distance from the straight wire is given by the following formula:
[tex]B=\frac{\mu_o I}{2\pi R}[/tex]
where,
R = distance from wire = ?
Therefore,
[tex]R = \frac{(4\pi \ x \ 10^{-7}\ N/A^2)(19.9\ A)}{2\pi(2.5\ x\ 10^{-3}\ T)}[/tex]
R = 1.6 x 10⁻³ m
Learn more about the magnetic field here:
https://brainly.com/question/19542022?referrer=searchResults
In Young's experiment a mixture of orange light (611 nm) and blue light (471 nm) shines on the double slit. The centers of the first-order bright blue fringes lie at the outer edges of a screen that is located 0.497 m away from the slits. However, the first-order bright orange fringes fall off the screen. By how much and in what direction (toward or away from the slits) should the screen be moved, so that the centers of the first-order bright orange fringes just appear on the screen
Answer:
0.5639m
Explanation:
For a young double slit experiment the expression below gives the angular separation for m dark fringe having slit width d and wavelength λ
=sin⁻¹(mλ/d)
mλ /d =y/L
for the first order,
y= mλL/d
For ratio separation y₀/yD=1 and d= 1
y₀/yD= [mλ ₀L₀/d]/[mλD.LD./d]
1=λ ₀L₀/λD.LD.
λD.LD= λ ₀L₀
L₀= λD.LD/ λ ₀..............(1)
Then substitute the given values into (1) we have
L₀=471 *0.497/611
= 0.3831m
Distance by which the screen has to be moved towards the slit is
LD- Lo
0.947-0.3831= 0.5639m
The entropy of any substance at any temperature above absolute zero is called the: Select the correct answer below:
a. absolute entropy
b. Third Law entropy
c. standard entropy
d. free entropy
e. none of the above
Answer:
b. Third Law entropy
Explanation:
Third law entropy: In physics, the term "third law entropy" or "the third law of thermodynamics" states that the specific entropy of a particular system at "absolute zero" is considered as a "well-defined constant". It occurs because any system at "zero temperature" tends to exists or persists in its "ground state" in order for the entropy to be determined or described only by the "degeneracy" of the given ground state.
In the question above, the correct answer is option b.
A wire of 5.8m long, 2mm diameter carries 750ma current when 22mv potential difference is applied at its ends. if drift speed of electrons is found then:_________.
(a) The resistance R of the wire(b) The resistivity p, and(c) The number n of free electrons per unit volume.
Explanation:
According to Ohms Law :
V = I * R
(A) R (Resistance) = 0.022 / 0.75 = 0.03 Ohms
Also,
[tex]r = \alpha \frac{length}{area} = \alpha \frac{5.8}{3.14 \times 0.001 \times 0.001} [/tex]
(B)
[tex] \alpha(resistivity) = 1.62 \times {10}^{ - 8} [/tex]
Drift speed is missing. It is given as;
1.7 × 10^(-5) m/s
A) R = 0.0293 ohms
B) ρ = 1.589 × 10^(-8)
C) n = 8.8 × 10^(28) electrons
This is about finding, resistance and resistivity.
We are given;Length; L = 5.8 m
Diameter; d = 2mm = 0.002 m
Radius; r = d/2 = 0.001 m
Voltage; V = 22 mv = 0.022 V
Current; I = 750 mA = 0.75 A
Area; A = πr² = 0.001²π
Drift speed; v_d = 1.7 × 10^(-5) m/s
A) Formula for resistance is;R = V/I
R = 0.022/0.75
R = 0.0293 ohms
B) formula for resistivity is given by;ρ = RA/L
ρ = (0.0293 × 0.001²π)/5.8
ρ = 1.589 × 10^(-8)
C) Formula for current density is given by;J = n•e•v_d
Where;
J = I/A = 0.75/0.001²π A/m² = 238732.44 A/m²
e is charge on an electron = 1.6 × 10^(-19) C
v_d = 1.7 × 10^(-5) m/s
n is number of free electrons per unit volume
Thus;
238732.44 = n(1.6 × 10^(-19) × 1.7 × 10^(-5))
238732.44 = (2.72 × 10^(-24))n
n = 238732.44/(2.72 × 10^(-24))
n = 8.8 × 10^(28)
Read more at; brainly.com/question/17005119
If a soap bubble is 130 nmnm thick, what wavelength is most strongly reflected at the center of the outer surface when illuminated normally by white light
Answer:
The question is not complete, here is the other part.
Assume that n = 1.36.
Express your answer to three significant figures and include the appropriate units.
λ = 707.2nm
Explanation:
n = 1.36
t = 130
2 n t= (m+1/2) λ
To solve for λ.
λ = 2 n t ÷ m+1/2
λ = 2 × 1.36 × 130 ÷ m +1/2
λ =
If m= 0
λ= 353.6 ÷ 0+ 1/2
λ = 353.6 × 2
= 707.2nm
