The residual if the room temperature was 25°C and the cupric chloride had an etching rate of 5 μm/min is equals to the -2 μm/min.
The residual for each observation in statistics is the difference between predicted values of y (dependent variable) and observed values of y. That is Residual= observed y value − predicted y.
Here, cupric chloride is used to etch circuit boards. The linear regression equation is, y = 2 + (1/5)x
where, x = temperature in °C
y = etching rate in μm/min
Observed value of etching rate of cupric chloride = 5 μm/min for 25°C
To determine the estimated or predicted value of etching rate of cupric chloride, we substite x = 25, in the above linear equation, y = 2 + (1/5)x
=> y = 2 + (1/5)× 25
=> y = 7
So, Predicted Value = 7 μm/min
Observed Value = 5 μm/min.
Residual = Observed Value - Predicted
= 5 - 7 = -2
Hence, required value is -2 μm/min.
For more information about residual, visit
https://brainly.com/question/30675733
#SPJ4
Complete question:
Calculating and interpreting residuals You might need: Calculator Alexander uses cupric chloride to etch circuit boards. He recorded the room temperature, in °C, and the etching rate, in μm/min of the cupric chloride. After plotting his results, Alexander noticed that the relationship between the two variables was fairly linear, so he used the data to calculate the following least squares regression equation for predicting the etching rate from the room temperature: y = 2 + 5/x, What is the residual if the room temperature was 25°C and the cupric chloride had an etching rate of 5 μm/min. ? Show Calculator
using the net below find the area of the triangular prism
6 cm
3 cm
4 cm
6 cm
5 cm
2 cm
Answer:153
Step-by-step explanation:
The graph shows the velocity, v metres per second, of a car at time t seconds. Work out an estimate for the distance the car travelled for the first 8 seconds. Use 4 strips of equal width. -1-500- -1000- -500 0 V t
please help!!!
To estimate the distance traveled we need to find the area under the velocity-time graph from 0 to 8 seconds So,The estimate for the distance the car traveled for the first 8 seconds is 4000 meters.
Define velocity-time graph?A velocity-time graph is a graphical representation that shows the velocity of an object on the y-axis and time on the x-axis. It is used to depict the change in velocity over time and can provide information about the acceleration or deceleration of an object.
The height of each strip can be estimated by taking the average of the velocities at the beginning and end of the strip.
Using the trapezium rule, the estimated area of each strip is:
Strip 1: 0.5 x (0 + 2) x (0 + (-500)) = -500 m/s
Strip 2: 0.5 x (2 + 4) x (-500 + (-1000)) = -1500 m/s
Strip 3: 0.5 x (4 + 6) x (-1000 + (-500)) = -1500 m/s
Strip 4: 0.5 x (6 + 8) x (-500 + 0) = -500 m/s
The total estimated area is the sum of the areas of the 4 strips:
Total estimated area = -500 + (-1500) + (-1500) + (-500) = -4000 m/s
Since the area represents the distance traveled by the car, we can take the absolute value of the area to get the estimated distance traveled:
Estimated distance traveled is = |-4000| = 4000 meters
To know more about areas visit:
https://brainly.com/question/18066837
#SPJ1
machines at a factory produce circular washers with a specified diameter. the quality control manager at the factory periodically tests a random sample of washers to be sure that greater than 90 percent of the washers are produced with the specified diameter. the null hypothesis of the test is that the proportion of all washers produced with the specified diameter is equal to 90 percent. the alternative hypothesis is that the proportion of all washers produced with the specified diameter is greater than 90 percent. which of the following describes a type i error that could result from the test? responses the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test does not provide convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is equal to 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. the test provides convincing evidence that the proportion is greater than 90%, but the actual proportion is greater than 90%. a type i error is not possible for this hypothesis test.
Answer:
the test does not provide convincing evidence that the proportion is greater than 90%
Stacy rented a truck for one day there was a base fee of $16.95 and there was an additional charge of 93 cents for each model driven. stacy had to pay $143.43 when he returned the truck. for how many miles did she drive the truck
Answer:
Stacy rented a truck for one day there was a base fee of $16.95 and there was an additional charge of 93 cents for each model driven. stacy had to pay $143.43 when he returned the truck. for how many miles did she drive the truck
Step-by-step explanation:
Let's start by subtracting the base fee from the total cost:
$143.43 - $16.95 = $126.48
Now, we can divide the remaining cost by the cost per mile:
$126.48 ÷ $0.93/mile ≈ 136 miles
Therefore, Stacy drove the truck for approximately 136 miles.
an equation of a circle is given by (x+3)^2+(y_9)^2=5^2 apply the distributive property to the square binomials and rearrange the equation so that one side is 0.
The equation of the circle is [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex].
Given:
Equation of the circle is [tex](x+3)^2+(y-9)^2=5^2[/tex]
Expand the equation
[tex](x+3)^2 = (x+3)(x+3) = x^2 + 3x + 3x + 9 = x^2 + 6x + 9[/tex]
[tex](y-9)^2 = (y-9)(y-9) = y^2 - 9y - 9y + 81 = y^2 - 18y + 81[/tex]
[tex]5^2 = 25[/tex]
Then, substitute the expanded expressions into the equation
[tex](x+3)^2+(y-9)^2=5^2\\(x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\[/tex]
Simplify and combine like terms
[tex](x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\x^2 + y^2 + 6x - 18y + 90 = 25[/tex]
Rearrange the equation so that one side is 0
[tex]x^2 + y^2 + 6x - 18y + 90 = 25\\x^2 + y^2 + 6x - 18y + 90 - 25 = 0\\x^2 + y^2 + 6x - 18y + 65 = 0[/tex]
Thus, the equation of a circle [tex](x+3)^2+(y-9)^2=5^2[/tex] can be rearranged using the distributive property to form [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex], with one side equaling 0.
Learn more about distributive property here: https://brainly.com/question/2807928
#SPJ11
In a regular pentagon PQRST. PR intersects QS
at O. Calculate angle ROS.
Answer: 72°
Step-by-step explanation:
To find the interior angle of this shape, use the formula 180(n-2)/n, where n is the amount of sides. Plugging 5 in for the interior angle of a pentagon, you get 180(3)/5, or 108°.
Using the statement that PR intersects QS, we can see that triangle QOR is isosceles (to get this, look at triangle PQR, and note that because it has 2 equal side lengths, and its last length is not equivalent to the other 2 sides, it is isosceles). Solving for angle PRQ, we know one angle is 108°, and the other two are equal. The total angle in a triangle is 180°, so (180°-108°)/2 = 36° (angles QPR and PRQ).
Since the angle of R = 108°, we can find angle PRS as 108° - 36°, or 72°. Since triangles PQR and QRS are similar (share the same angles and side lengths), we can see that angle RQS and RSQ are both 36°.
Since ORS is a triangle, its angle total is 180°. Since we know the angles ORS and OSR (respectively) already as 72° and 36°, we can subtract these angles to find angle ROS. 180°-72°-36° = 72°
what is the variance inflation factor measuring? (select all that apply) group of answer choices the variance of the error term how much the explanatory variables are associated with one another the variance of the coefficient estimates the collinearity of the explanatory variable
The Variance Inflation Factor (VIF) measures the degree of correlation or the collinearity of the explanatory variables.
VIF quantifies how much each explanatory variable is correlated with a linear combination of the other variables in a multiple regression model. This can help identify variables that are redundant, irrelevant, or harmful to the model's accuracy. The VIF is calculated for each explanatory variable by dividing the variance of the regression coefficient estimates by the variance of the regression coefficient estimates when that variable is excluded from the model.
If the VIF is greater than 1, it indicates that the variance of the regression coefficient estimate for that variable is inflated by the presence of the other variables, which reduces the model's accuracy. Therefore, a VIF greater than 1 is considered to be an indication of collinearity or multicollinearity in the explanatory variables. The VIF measures the degree of correlation or the collinearity of the explanatory variables, and it can identify variables that are redundant, irrelevant, or harmful to the model's accuracy.
Learn more about Variance Inflation Factor (VIF) here: https://brainly.com/question/28941844
#SPJ11
3. any time you are presented with data or statistics are many things you should consider. list two examples of things you need to consider when evaluating a data set or statistics. why do you need to consider them?
When evaluating a data set or statistics, the things to consider are sample size and data quality. It's important to consider these things because they provide insight into the validity of the data and the accuracy of the statistics that are being used.
When presented with a dataset or statistics, there are several things to consider.
Here are two examples of what you need to consider when evaluating a dataset or statistics:
1. Sample size: It's important to consider the sample size because small sample sizes are more likely to be biased. For example, a small sample size might be unrepresentative of a larger population. A sample size of 30 is commonly used to distinguish between small and large samples in statistics. Larger sample sizes are often more representative of the population and produce more reliable statistics.
2. Data quality: The quality of the data is also an important consideration. When evaluating statistics, you must ensure that the data is accurate, relevant, and up-to-date. This is important because using incorrect or outdated data can lead to incorrect conclusions. Additionally, if the data is missing or incomplete, you may not be able to get an accurate picture of the population that the dataset is supposed to represent. This can skew the results, making them less reliable or even completely useless. Therefore, data quality is an important consideration when evaluating statistics.
Learn more about Data set or statistics here:
https://brainly.com/question/15525560
#SPJ11
I NEED HELPP PLEASEEEEEEEE
The slope between the points (-3, 0) and (0, -1) is -1/3.
What is slope?The slope of a line serves as a gauge for its steepness. It may be calculated by dividing the difference in y-coordinate by the difference in x-coordinate between any two points on a line. A line's slope might be zero, positive, negative, or undefinable. A line with a positive slope is moving upward from left to right, a negative slope is moving downward from left to right, and a line with a zero slope is level. The line is vertical if the slope is undefinable.
Let us consider the first two points (-3, 0) and (0, -1).
The slope of the line is given as:
m = (y2 - y1) / (x2 - x1)
Substituting the values we have:
m = (-1 - 0) / (0 - (-3)) = -1/3
Hence, the slope between the points (-3, 0) and (0, -1) is -1/3.
Learn more about slope of line here:
https://brainly.com/question/11559942
#SPJ1
Please help quick with this question.
Answer:
b = [tex]\frac{S-2la}{h+l}[/tex]
Step-by-step explanation:
S = bh + lb + 2la ( reversing the equation )
bh + lb + 2la = S ( subtract 2la from both sides )
bh + lb = S - 2la ← factor out b from each term on the left side
b(h + l) = S - 2la ← divide both sides by (h + l)
b = [tex]\frac{S-2la}{h+l}[/tex]
Coin A is tossed three times and coin B is tossed two times. What is the probability that more heads are tossed using coin A than coin B?
The probability that more heads are tossed using coin A than coin B is 5/16.
The given data is: Coin A is tossed three times and coin B is tossed two times. We have to find the probability that more heads are tossed using coin A than coin B.
P(E) = Number of favorable outcomes/ Total number of possible outcomes
Coin toss:
There are two possible outcomes in a coin toss, Head or Tail. The probability of getting a head in a coin toss is
1/2 = 0.5.
Therefore, the probability of getting a tail in a coin toss is also 1/2 = 0.5.
Let's calculate the possible outcomes when coin A is tossed three times.
There are 2 possible outcomes when one coin is tossed.
Number of possible outcomes when three coins are tossed = 2 * 2 * 2 = 8
Likewise, the possible outcomes when coin B is tossed two times are:
The number of possible outcomes = 2 * 2 = 4
Therefore, the total number of possible outcomes = 8 * 4 = 32
Now, we will find out the cases where the number of heads is more when coin A is tossed three times.
HHH HHT HTH HTT THH THT TTH TTT HHT HTT THT TTT TTH TTT HTT TTT THT TTT TTT TTT
Therefore, the number of times when more heads are obtained when coin A is tossed three times is 10. (We have to exclude the case when there is an equal number of heads.)
Therefore, the required probability is: P = Number of favorable outcomes/ Total number of possible outcomes
P = 10/32P = 5/16
Therefore, the probability that more heads are tossed using coin A than coin B is 5/16.
To know more about probability for coin tossing: https://brainly.com/question/16988487
#SPJ11
You are dealt five cards from a standard deck of 52 playing cards (A full house consists of three of one kind and two of another. For example, A A A 5-5 and K-K-K 10-10 are full houses) (a) in how many ways can you get a full house? ______ Ways (b) in how many ways can you get a five card combination containing two jacks and three aces ___ ways
The 32 ways to get a five-card combination containing two jacks and three aces.
(a) A full house consists of three of one kind and two of another kind. Therefore, there are 13 different choices for the rank of the triplet and 4 cards of the same rank. Once the triplet has been chosen, there are 12 choices for the rank of the pair and 4 cards of the same rank. Therefore, the number of ways to get a full house is as follows:$${13}{\times}{4}{\times}{12}{\times}{4}={7488}$$Therefore, there are 7488 ways to get a full house.(b) In this case, the two jacks and three aces must be chosen out of the 4 jacks and 4 aces in the deck. Therefore, the number of ways to get a five-card combination with two jacks and three aces is as follows:$$\frac{{4\choose2}{4\choose3}{44\choose0}}{5!}={32}$$Therefore, there are 32 ways to get a five-card combination containing two jacks and three aces.
Learn more about Combination
brainly.com/question/27014146
#SPJ11
Solve the inequalities 1/3x-1/4(x+2)>3x-4/3
Answer: x < -46/17
Step-by-step explanation:
To solve the inequality:
1/3x - 1/4(x + 2) > 3x - 4/3
First, we simplify the left-hand side by finding a common denominator:
4(1/3x) - 3/4(x + 2) > 3x - 4/3
4/3x - 3/4x - 9/2 > 3x - 4/3
Next, we simplify the equation:
7/12x - 9/2 > 3x - 4/3
To isolate the variable x on one side of the inequality, we will move all the x terms to the left-hand side and all the constants to the right-hand side:
7/12x - 3x > 9/2 - 4/3
-17/12x > 23/6
Finally, we can solve for x by dividing both sides by -17/12, remembering to reverse the inequality because we are dividing by a negative number:
x < (23/6) ÷ (-17/12)
x < -46/17
Therefore, the solution to the inequality is:
x < -46/17
the weight of a body above the surface of the earth is inversely proportional to the square of its distance from the center of the earth. what is the effect on the weight when the distance is multiplied by 2?
The weight becomes 1/4 of its original value when the distance is multiplied by 2.
According to the question, "the weight of a body above the surface of the earth is inversely proportional to the square of its distance from the center of the earth." We need to determine the effect on the weight when the distance is multiplied by 2.
Let w be the weight of a body, d be the distance from the center of the earth, and k be the constant of variation. According to the question,
w = k / d²
When the distance is multiplied by 2, the new distance is 2d. Therefore, the new weight is given by:
w' = k / (2d)²
w' = k / 4d²
w' = w / 4
Therefore, the weight becomes 1/4 of its original value when the distance is multiplied by 2.
To learn more about weight refer :
https://brainly.com/question/30825684
#SPJ11
Luke bought 4 kilograms of apples and 0.29 kilograms of oranges. How much fruit did he buy
in all?
He bought 4.29 Kilos of fruit.
4+0.29=4.29
Luke bought 4.29 kilograms of fruit in all
Step-by-step explanation:
Simple addition will be used to find the total fruit Luke bought.
Given
Amount of apples he bought = 4 kilograms
Amount of oranges he bought = 0.29 kilograms
so the total fruit will be:
[tex]\text{total fruit}=\text{Apples}+\text{oranges}[/tex]
[tex]=4+0.29[/tex]
[tex]=4.29[/tex]
So,
Luke bought 4.29 kilograms of fruit in all
Keywords: Measurement, addition
Learn more about addition at:
https://brainly.com/question/568799https://brainly.com/question/567922#LearnwithBrainly
PLEASE HELP WILL GIVE BRAINLIEST.
Given f(x)=sin x and g(x)=cos x show that f(g(pi/2))=0. Show all your steps.
Answer:
Step-by-step explanation:
xs nxqxm,nswjnej,cebxhjme2ckjwadbcweckslnvc
First, we need to find the value of g(pi/2):
g(pi/2) = cos(pi/2) = 0
Now we can substitute this value into f(x):
f(g(pi/2)) = f(0) = sin(0) = 0
Therefore, f(g(pi/2)) = 0.
Round the answer to the nearest hundredth
Using trigonometric functions, the value of the side AC = 2.85 units.
What are trigonometric functions?The right triangle's angle serves as the domain input value for the six fundamental trigonometric operations, and the output is a range of numbers.
The angle, given in degrees or radians, is the domain of the trigonometric function, sometimes referred to as the "trig function," of f(x) = sin, and the range is [-1, 1]. The other functions have a similar domain and scope. Trigonometric functions are widely used in algebra, geometry, and calculus.
Now in the given figure,
The angle is a right-angled triangle.
Now as per the trigonometric functions,
Sin 35° = AC/AB
⇒ 0.57 = x/5
⇒ x = 0.57 × 5
= 2.85.
The length of the opposite side AC is 2.85 units.
To know more about trigonometric functions, visit:
https://brainly.com/question/14746686
#SPJ1
Can someone just help me on 19, it’s pretty confusing. Just look around at the other questions so it’ll help with answering it.
Answer:
0% (0/40)
Step-by-step explanation:
I feel like this is a trick question. since chicken is not indicated on the graph, I believe chicken is nobodies favorite food
Ten cards are selected out of a 52 card deck without replacement and the number of Jacks is observed. This is an example of a Binomial Experiment.
true
false
The statement "Ten cards are selected out of a 52 card deck without replacement and the number of Jacks is observed. This is an example of a Binomial Experiment" is false.
What is a Binomial Experiment?A binomial experiment is an experiment that is repeated multiple times with each repetition having only two potential outcomes. In a binomial experiment, the probability of success remains constant from trial to trial.
The criteria for a binomial experiment are as follows:
The experiment is made up of a fixed number of trials.There are only two possible results for each trial: success and failure.The probability of success for each trial is the same.The trials are all independent of one another.The formula for calculating the probability of x successes in n trials is:P(x) = (ⁿCₓ)(pˣ)(q^(n-x))
Where p is the probability of success, q is the probability of failure (q = 1 - p), and ⁿCₓ is the combination formula.
Therefore, the statement "Ten cards are selected out of a 52-card deck without replacement and the number of Jacks is observed. This is an example of a "Binomial Experiment" being false. This is because the probability of drawing a jack changes with each trial, as the deck's composition changes after each card is drawn.
To know more about the "Binomial Experiment": https://brainly.com/question/9325204
#SPJ11
Which angles would the Alternate Exterior Angles Theorem state are congruent?
Which angles would the Alternate Exterior Angles Theorem state are congruent?
Answer:
Choice 2
∠1 and ∠7, ∠2 and ∠8
Step-by-step explanation:
This is a good example of a problem that can be solved by POE(process of elimination)
First choice: ∠2 and ∠3 are on the same straight line so they cannot be congruent. They are supplementary in that they add up to 180°
The same applies for ∠3 and ∠4 (third choice)
The same applies for ∠1 and ∠4 (fourth choice)
That leaves choice 2
We can prove ∠1 ≅ ∠7 as follows:
∠1 ≅ ∠3 since they are vertically opposite angles
∠3 ≅ ∠7 since they are exterior angles
So ∠1 ≅ ∠7
By similar reasoning,
∠2 ≅ ∠8
So correct choice is Choice 2
Let A, B, and C be subsets of some universal set U. (a) Draw two general Venn diagrams for the sets A, B, and C. On one, shade the region that represents A - (B nC), and on the other, shade the region that represents (A -B) U (A C). Based on the Venn diagrams, make a conjecture about the relationship between the sets A-(BnC) and (A -B)U (A -C). (b) Use the choose-an-element method to prove the conjecture from Exer- cise (5a). (c) Use the algebra of sets to prove the conjecture from Exercise (5a).
In conclusion, we can prove that[tex](A -B) U (A C)[/tex] is a superset of[tex]A - (B nC)[/tex] using both the choose-an-element method and the algebra of sets.
To answer this question, let's first draw two Venn diagrams to represent the sets A, B, and C. In the first Venn diagram, shade the region that represents[tex]A - (B nC)[/tex].
This is the region outside of the intersection of B and C and inside of A. In the second Venn diagram, shade the region that represents [tex](A -B) U (A C).[/tex] This is the union of the region outside of B and the region outside of C, both of which are inside of A. Based on these diagrams, we can make the conjecture that (A -B) U (A C) is a superset of A - (B nC).
To prove this conjecture, we can use the choose-an-element method. Let a be an element of A - (B nC). This means that a is in A, but not in B or C. Since a is in A, it is also in (A -B) U (A C), and therefore (A -B) U (A C) is a superset of A - (B n C).
We can also use the algebra of sets to prove this conjecture.[tex]A - (B n C) = (A -B) U (A -C) since A - (B n C)[/tex]is the union of the regions outside of B and outside of C, both of which are inside of A. This implies that (A -B) U (A C) is a superset of A - (B nC).
for such more questions on Venn diagram
https://brainly.com/question/30599101
#SPJ11
I need help with these 2 please
Question 7. C (rectangular pyramid)
Question 8. 17 cm
Answer:
Question 7:C rectangular pyramid
Question 8: C 120 in
A=2(wl+hl+hw)=2·(10·2+5·2+5·10)=160
Step-by-step explanation:
How to graph it on a coordinate plan to the right 5x-3y=18
Tο shift the graph tο the right, we can simply add a pοsitive cοnstant tο the x values οf each pοint befοre plοtting them. Fοr example, if we want tο shift the graph tο the right by 2 units.
What is cοοrdinate plan?The intersectiοn οf twο number lines creates a twο-dimensiοnal plane knοwn as a cοοrdinate plane. The x-axis, a hοrizοntal number line, and the y-axis, a vertical number line, are twο examples οf these number lines.
Tο graph the equatiοn 5x - 3y = 18 οn a cοοrdinate plane, we can fοllοw these steps:
1. Sοlve fοr y in terms οf x:
5x - 3y = 18
-3y = -5x + 18
y = (5/3)x - 6
2. Chοοse sοme values fοr x and use the equatiοn tο find the cοrrespοnding y values. Fοr example, we can chοοse x = 0, 3, and 6:
When x = 0: y = (5/3)(0) - 6 = -6
When x = 3: y = (5/3)(3) - 6 = -3
When x = 6: y = (5/3)(6) - 6 = 2
3. Plοt the pοints (0, -6), (3, -3), and (6, 2) οn the cοοrdinate plane.
4. Draw a straight line passing thrοugh these three pοints. This line represents the graph οf the equatiοn 5x - 3y = 18.
To know more about coordinate plan visit,
https://brainly.com/question/27481419
#SPJ1
an ore sample weighs 18.5 n n in air. when the sample is suspended by a light cord and totally immersed in water, the tension in the cord is 11.8 n n .find the total volume and density of the sample
The total volume of the sample is 0.0067 m³ and the density of the sample is 2753.73 kg/m³.
An ore sample weighs 18.5 N in air. When the sample is suspended by a light cord and totally immersed in water, the tension in the cord is 11.8 N. When the ore sample is immersed in water, the tension in the cord is given as 11.8 N.
Thus, the buoyancy force experienced by the ore sample is given by the difference between the weight of the sample in the air and the tension in the cord.
Buoyancy force experienced by the ore sample = Weight of the sample in the air - Tension in the cord
Buoyancy force experienced by the ore sample = (18.5 N) - (11.8 N)
Buoyancy force experienced by the ore sample = 6.7 N
Also, we know that the weight of the ore sample in air is equal to the weight of the ore sample when immersed in water.
Weight of the ore sample = Weight of the displaced water
Weight of the ore sample = Buoyancy force experienced by the ore sample
Weight of the ore sample = 6.7 N
The density of the ore sample
Density is given by the formula Density = Mass/Volume
Where Density is measured in kg/m³
Mass is measured in kg
Volume is measured in m³
Also, the density of water is given as 1000 kg/m³.
The density of the ore sample = Mass/Volume
Mass = Density x Volume
Volume of the ore sample can be obtained from volume of the displaced water.
Volume of the displaced water = Weight of the ore sample/Density of water
Volume of the displaced water = (6.7 N)/(1000 kg/m³)
Volume of the displaced water = 0.0067 m³
Density of the ore sample = (18.5 N)/(0.0067 m³)
Density of the ore sample = 2753.73 kg/m³
Therefore, 0.0067 m³ is the sample's total volume and 2753.73 kg/m³ is the density of the sample.
To know more about density: https://brainly.com/question/952755
#SPJ11
20x50x30x50 = ?
Please answer someone!!
Answer: 1500000
Step-by-step explanation:
use a calculator
Answer:
1,500,000
Step-by-step explanation:
Breaking it up into an easier problem:
20x50 = 1,000
30x50=1,500
1,000 x 1,500, aka "adding three zeros" to the end of 1,500, as 1,000 is simply 1 x 10 x 10 x 10, and each 10 has one 0 to it.
Thus, the answer is 1,500,000
The average between 3. 15 and x is 40 what is x?
The value of x that makes the average between 3.15 and x equal to 40 is 76.85.
In this problem, we are given two numbers, 3.15 and x, and told that the average between them is 40. We can set up an equation to solve for x as follows:
(3.15 + x) / 2 = 40
To find the average between 3.15 and x, we add the two numbers together and divide by 2, which gives us the equation above.
To solve for x, we can start by multiplying both sides of the equation by 2:
3.15 + x = 80
Next, we can subtract 3.15 from both sides of the equation:
x = 76.85
To know more about average here
https://brainly.com/question/16956746
#SPJ4
Use the formula pH=log(1/[H^+]) to write an expression for the concentration of hydrogen ions in a liter of a sports drink that has a pH of 2. 4. What is the concentration of hydrogen ions?
The concentration of hydrogen ions in a liter of the sports drink is approximately 3.98 x 10^(-3) moles per liter.
The pH of a substance is a measure of its acidity or basicity and is defined as the negative logarithm (base 10) of the hydrogen ion concentration [H+]. The formula for pH is given as pH = -log[H+].
To find the concentration of hydrogen ions in a liter of a sports drink that has a pH of 2.4, we can use the formula pH = -log[H+]. Rearranging this formula, we get [H+] = 10^(-pH).
Substituting the given value of pH into this expression, we get [H+] = 10^(-2.4).
It's worth noting that the hydrogen ion concentration is related to the acidity of a solution; the higher the hydrogen ion concentration, the more acidic the solution. The pH scale ranges from 0 (most acidic) to 14 (most basic), with a pH of 7 being neutral. The sports drink in question has a relatively low pH, indicating that it is quite acidic.
To learn more about hydrogen ions
https://brainly.com/question/8069088
#SPJ4
The village of Hampton has 436 families 238 of the families live within 1 mile of the village square use mental math to find how many families live farther than 1 mile from the square show your work
Answer: 198 families live farther than 1 mile from the square.
Step-by-step explanation:
We know that there are 238 families that live within 1 mile of the village square. To find the number of families that live farther than 1 mile from the square, we can subtract 238 from the total number of families:
436 - 238 = 198
Therefore, 198 families live farther than 1 mile from the square. We can do this subtraction mentally without needing a calculator.
What are the zeros of the function? Set the function = 0, factor, and use the zero-product property. Show your steps!
f(x) = x² + 7x – 60
(100 POINTS AND BRAINLIEST)
The zeroes of the function are -12 and 5.
What is meant by Zeros of the function?Zeros of a function are the values of the input variables that make the output of the function equal to zero. The zeros are the solutions of equation f(x) = 0.
According to the question:
To find the zeros of the function
f(x) = x² + 7x - 60, we must set f(x) equal to zero and solve for x.
So we start with the equation:
x² + 7x - 60 = 0
Next, we need to factor the left side of the equation. We are looking for two numbers that multiply to -60 and add to 7. After some trial and error, we find that the numbers are 12 and -5:
x² + 7x - 60 = (x + 12)(x - 5) = 0
Now we can apply the zero product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. Therefore, we set each factor equal to zero and solve for x:
x + 12 = 0 or x - 5 = 0
Solving for x, we get:
x = -12 or x = 5
The zeros of the function f(x) = x² + 7x - 60 are therefore x = -12 and x = 5.
To know more about Zeros of the function visit:
brainly.com/question/16633170
#SPJ1
A triangle has vertices at (-4, 0), (2, 8), and (8, 0). Complete the table. Write answers as decimals
rounded to the nearest hundredth, when necessary.
The coordinate of centroid of the triangle is (2, 8/3), the coordinate of the circumcenter is (-7/32, 121/24) and the coordinate of orthocenter is (2, 9/2)
What is the coordinate of the centroid?a. To find the centroid of a triangle, we take the average of the x-coordinates and the average of the y-coordinates of the vertices. Therefore, the x-coordinate of the centroid is:
(x₁ + x₂ + x₃) / 3 = (-4 + 2 + 8) / 3 = 2
Similarly, the y-coordinate of the centroid is:
(y₁ + y₂ + y₃) / 3 = (0 + 8 + 0) / 3 = 8/3
So the coordinate of the centroid is (2, 8/3).
b. The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect. To find the circumcenter, we can find the equations of the perpendicular bisectors of any two sides of the triangle and solve for their intersection point.
Let's take the sides formed by vertices (-4, 0) and (2, 8), and vertices (-4, 0) and (8, 0). The midpoint of the first side is ((-4+2)/2, (0+8)/2) = (-1, 4), and the slope of the line passing through the two points is (8-0)/(2-(-4)) = 8/6 = 4/3. Therefore, the equation of the perpendicular bisector passing through (-1, 4) is:
y - 4 = (4/3)(x + 1)
Simplifying this equation, we get:
y = (4/3)x + 13/4
Similarly, the midpoint of the second side is ((-4+8)/2, (0+0)/2) = (2, 0), and the slope of the line passing through the two points is (8-0)/(2-8) = -8/6 = -4/3. Therefore, the equation of the perpendicular bisector passing through (2, 0) is:
y = -(4/3)(x - 2)
To find the intersection point of these two lines, we can set the equations equal to each other and solve for x:
(4/3)x + 13/4 = -(4/3)(x - 2)
x = -7/32
Substituting x = -7/32 into either of the equations, we get:
y = (4/3)(-7/32 + 1) + 4 = 121/24
So the coordinate of the circumcenter is (-7/32, 121/24).
c. The orthocenter of a triangle is the point where the altitudes of the triangle intersect. An altitude of a triangle is a line segment from a vertex of the triangle perpendicular to the opposite side.
Let's take vertex (-4, 0) and find the equation of the line passing through this vertex and perpendicular to the opposite side formed by vertices (2, 8) and (8, 0). The slope of the opposite side is (0-8)/(8-2) = -8/6 = -4/3, so the slope of the line we want is the negative reciprocal of this, which is 3/4. Therefore, the equation of the altitude passing through (-4, 0) is:
y - 0 = (3/4)(x + 4)
Simplifying this equation, we get:
y = (3/4)x + 3
Let's now take vertex (2, 8) and find the equation of the altitude passing through it. The slope of the opposite side formed by vertices (-4, 0) and (8, 0) is (0-0)/(8-(-4)) = 0, which means the altitude passing through (2, 8) is a vertical line passing through (2, 0). Therefore, the equation of this altitude is:
x = 2
Now we need to find the intersection point of these two altitudes. Substituting y = (3/4)x + 3 into the equation x = 2, we get:
y = 9/2
The coordinate of the orthocenter is (2, 9/2)
Learn more on centroid of triangle here;
https://brainly.com/question/7644338
#SPJ1