Answer:
Explanation:
Absorption of digested food takes place in the small intestine.
Hope this helps
plz mark as brainliest!!!!!
Answer:
Absorption of digested food takes place in the small intestine.
Explanation:
Which of these scientist is know for his work in understanding climate change a : edwin hubble b : christian doppler c : warren washington d : charles kuen kao
Answer: just trust me its c
Explanation: i dont cap
Consider the hypothetical chemical reaction represented by the equation 3 A + 2 B → A 3B 2 Which of the following is a correct interpretation of this equation? i. 3 grams of A react with 2 grams of B to form 1 gram of A 3B 2 ii. 3 atoms of A react with 2 atoms of B to form 1 molecule of A 3B 2 iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Answer:
iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Explanation:
A + 2 B → A 3B 2
A chemical equation among other things, gives the stoichiometry of the reaction; that is the relationship between reactants and products.
This relationship is basically stated in moles form the coefficients of the reactants and product.
From the reaction above, we can say;
1 mol of A reacts with 2 mol of B to form 1 mol of A3B2
It cannot be grams because the reactants and products all have different molar masses.
The correct interpretation of the equation of the hypothetical chemical reaction is; Choice (iii) 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2.
Definition:
Chemical equations are equations that make use of chemical formulae and symbols to represent chemical reactions. The left-hand side of a chemical equation represents the reactants and the right-hand side represents the products.
Each reacting entity is also assigned its corresponding stoichiometric coefficient.
However, this stoichiometric coefficient is to quantify the no. of moles of the reactants consumed or products formed as the case may be.
Read more:
https://brainly.com/question/12271256
0.32 L is equal to how many mL
Select the correct answer from each drop-down menu. At chemical equilibrium, the amount of because .
Answer:
The answer that completes the question are in BOLD:
At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.
Explanation:
In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.
The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.
When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.
N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.
List the metals Mg, Cu, Au, Na and Al in the decreasing order of their reactivity with air.
Answer:
Na is most reactiveAlcuAu is less reactiveIN HEREAnswer:
Potassium (K)
Sodium (Na)
Calcium (Ca)
Magnesium (Mg)
Aluminium (Al)
Iron (Fe)
Lead (Pb)
Copper (Cu)
Silver (Ag)
Gold (Au)
In the laboratory, a volume of 100 mL of sulfuric acid (H2SO4) is recorded. How many g are there of the liquid if its density is 1.83 g / cm3?
Answer:
[tex]\large \boxed{\text{183 g}}[/tex]
Explanation:
[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]
If two solutions with concentrations of 0.4 M sugar and 0.7 M sugar respectively are separated by a semipermeable membrane, during osmosis there is a net flow of Group of answer choices sugar molecules from the dilute to the concentrated solution sugar molecules from the concentrated to the dilute solution water molecules from the concentrated to the dilute solution water molecules from the dilute to the concentrated solution
Answer: Water molecules from the dilute to the concentrated solution
Explanation:
During Osmosis if a solution is separerated by a semipermeable membrane, the solvent (typically water) from the less concentrated solution in terms of solute goes through the semipermeable membrane to the solution with the higher concentration so that the concentrations between the solutions can be balanced.
With the above solutions therefore, water molecules would move from the solution of 0.4M of sugar to the solution with a 0.7M of sugar through the semipermeable membrane.
During osmosis, water molecules move from the dilute to the concentrated solution.
OSMOSIS:
Osmosis is the movement of water molecules from a region of higher concentration (low concentration of solute) to a region of lower concentration (higher concentration of solute). The principle of movement is based on the concentration gradient i.e. difference in concentration across a semipermeable membrane. According to this question, two solutions have sugar concentrations of 0.4 M sugar and 0.7 M respectively and are separated by a semipermeable membrane. Therefore, water molecules will move from the dilute (0.4M) to the concentrated (0.7M) solution during osmosis.Learn more at: https://brainly.com/question/13655668?referrer=searchResults
Match the set of measurements of the boiling point of water with the best
description.
Measurements
Description
6. 103 °C, 90 °C, 101 °C
a.
Precise
7. 100 °C, 99 °C, 100 °C
b.
Accurate
8. 105 °C, 106 °C, 105 °C
c. Both accurate and precise
9. 99 °C, 101 °C, 100 °C
d. Neither accurate nor precise
Answer:
Matching
6.D
7.A
8.C
9.B
Explanation:
Took test
103 °C, 90 °C, 101 °C Neither accurate nor precise, 100 °C, 99 °C, 100 °C are Precise, 105 °C, 106 °C, 105 °C are Both accurate and precise, 99 °C, 101 °C, 100 °C are Accurate. These are the correct set of measurements of the boiling point of water.
what are boiling point and melting point ?The melting point is defined as the temperature at which solid and liquid phases are at equilibrium state, whereas the boiling point is defined as the temperature at which the pressure of a vapor of a liquid is equal to the external pressure.
Melting point in which the melting of solid occur to become a liquid at a given temperature, here the molecules gain enough amount of kinetic energy to get the intermolecular forces to convert into another form.
In case of Boiling point the liquid phase enters into the gaseous phase, when the external pressure is high than a temperature for the vapor pressure equal to the external pressure.
Learn more about boiling point, here:
brainly.com/question/28203474
#SPJ2
3.490x 10^-3 + 1.100x10^-2
[?]x10^[?]
[tex]1.44\times 10^{-2}[/tex]
Explanation:
We need to find the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex].
Here,
The first number is [tex]3.49\times 10^{-3}[/tex]
The second number is [tex]1.1\times 10^{-2}[/tex]
To add these numbers as follows :
[tex]3.49\times 10^{-3}+1.1\times 10^{-2}=0.01449\\\\=1.44\times 10^{-2}[/tex]
So, the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex] is [tex]1.44\times 10^{-2}[/tex]
Human lungs have evolved to breathe oxygen at a pressure as that in the atmosphere, 0.21 atm. If a particular heliox mixture to be carried by a scuba diver is at a pressure of 7.00 atm, what should be the partial pressure due to helium in order to maintain the pressure due to oxygen at 0.21 atm?
Answer:
6.79 atm
Explanation:
Applying Dalton's law of partial pressure:
[tex]P_{total} = P_{helium} + P_{oxygen}[/tex], where [tex]P_{total}[/tex] = total partial pressure of all the component gases in the mixture, [tex]P_{helium}[/tex] = partial pressure of helium gas, and [tex]P_{oxygen}[/tex] = partial pressure of oxygen gas.
From the illustration, [tex]P_{total}[/tex] = 7.00 atm and [tex]P_{oxygen}[/tex] = 0.21 atm. Hence, the partial pressure due to helium is calculated such that:
[tex]P_{helium}[/tex] = [tex]P_{total} - P_{oxygen}[/tex]
= 7.00 - 0.21
= 6.79 atm
Therefore, the partial pressure due to helium in order to maintain the pressure due to oxygen at 0.21 atm would be 6.79 atm.
Anna is excited about conducting her lab today. She takes out her lab sheet and reads over the lab. She goes and gathers all of the lab materials. She follows each lab procedure step-by-step until she has completed the procedure and recorded all of the data she collected. Afterwards, Anna takes two of the substances and mixes them together to see what would happen. Which lab safety rule did Anna break?
Answer:
Anna didn't wear a lab coat
Explanation:
The first thing anyone who is to carry out a procedure or an experiment in a lab needs to do when he/she enters a lab is to wear a lab coat. This is a lab safety rule that protects the individual from been affected by spillage that could occur as a result of the experiment been conducted.
From the narration in the question, it is not stated anywhere that Anna wore a lab coat before embarking on her lab procedure.
Answer:
C, wear goggles, anytime chemicals, heat, or glassware are used.
Explanation:
This is the correct answer on the Lincoln learning platform.
What is the main factor responsible for the acidic and basic character of oxides?
Explain your answer.
Explanation:
We define non-metal oxide acidity in terms of the acidic solutions formed in reactions with water. For example, sulfur trioxide reacts with water to forms sulfuric acid. In sum, acidic oxides are oxides of non-metals, and basic oxides are oxides of metals. ... CrO is basic, Cr2O3 is amphoteric and CrO3 is acidic.Reply me in commentsFind the density of a cube on Earth that weighs 1.5 kg and has a side-length of 10 cm.
Answer:
1.5g/cm³
Explanation:
density=mass÷volume
mass= 1.5kg (change into g) = 1500g
volume of the cube = 10×10×10 = 1000cm³
density= divide 1500g÷1000cm = 1.5g/cm³
Density= 1.5g/cm³YOUR WELCOME!
The density of the cube on Earth that weighs 1.5 kg and has a side length of 10 cm is 1.5g/cm³
What is density?"Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume."
density = mass / volume
The mass of the cube on earth is 1.5 kg
The side length of the cube is 10 cm.
The mass is given in kg. It is converted into grams.
mass= 1.5kg (change into g) = 1500g
A cube is a three-dimensional square, it has 6 faces, so its volume will be calculated completely.
Volume of the cube = 10×10×10 = 1000cm³
Putting the values in the formula of density
density= divide 1500g /1000cm = 1.5g/cm³
Thus, the density of the cube on Earth is 1.5g/cm³.
To learn more about density, refer to the link:
https://brainly.com/question/13291386
#SPJ2
Which of the following is not an antioxidant _________
1) Sodium benzoate 2) Sulphur dioxide 3) Sulphite salts 4) Citric acid
Answer: 1. Sodium Benzoate
Explanation: An anti-oxidant is a substance that can help prevent or stop the damage done by free radicals. Examples include; Sulphur Dioxide, Sulphite Salts, Citric Acid, e.t.c
Sodium benzoate is a pure preservative.
A 12.6 g block of a metal intially at a temperature of 94.0 °C is added to a 100.0 g sample of water intially at 21.0 °C. If the final temperature of the water is 25.1 °C, determine the specific heat of the metal. Write all equations or formulas you use, and show as much of your work as you can.
Answer:
The specific heat of the metal is 0.0482 joules per gram-Celsius.
Explanation:
Block of metal is cooled by adding water and thermal equilibrium is reached. According to the First Law of Thermodynamics and by supposing the absence of energy and mass interaction of the system with surroundings, the change in the energy of the system is represented by:
[tex]\Delta U_{m} + \Delta U_{w} = 0[/tex]
Where [tex]\Delta U_{m}[/tex] and [tex]\Delta U_{w}[/tex] are the changes in internal energies of the block of metal and water, measured in joules.
The expression described above is now extended by applying the definition of internal energy for constant mass systems:
[tex]m_{m}\cdot c_{v,m}\cdot (T_{m,in}-T_{m,out}) + m_{w}\cdot c_{v,w}\cdot (T_{w,in}-T_{w,out})= 0[/tex]
Where:
[tex]m_{m}[/tex], [tex]m_{w}[/tex] - Masses of the block of metal and water, measured in grams.
[tex]c_{v,m}[/tex], [tex]c_{v,w}[/tex] - Specific heats of the block of metal and water, measured in joules per gram-Celsius.
[tex]T_{in, m}[/tex], [tex]T_{in, w}[/tex] - Initial temperatures of the block of metal and water, measured in Celsius.
[tex]T_{out, m}[/tex], [tex]T_{out, w}[/tex] - Final temperatures of the block of metal and water, measured in Celsius.
The specific heat of the metal is cleared in the equation:
[tex]c_{v,m} = -\frac{m_{w}\cdot c_{v,w} (T_{w,in}-T_{w,out})}{m_{m}\cdot (T_{m,in}-T_{m,out})}[/tex]
If [tex]m_{m} = 12.6\,g[/tex], [tex]m_{w} = 100\,g[/tex], [tex]c_{v,w} = 4,186\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{w,in} = 21\,^{\circ}C[/tex], [tex]T_{m,in} = 94\,^{\circ}C[/tex] and [tex]T_{m,out} = T_{w,out} = 25.1\,^{\circ}C[/tex], the specific heat of the metal is:
[tex]c_{v,m} = -\frac{(100\,g)\cdot \left(4,186\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (25\,^{\circ}C-25.1\,^{\circ}C)}{(12.6\,g)\cdot (94\,^{\circ}C-25.1\,^{\circ}C)}[/tex]
[tex]c_{v,m} = 0.0482\,\frac{J}{kg\cdot ^{\circ}C}[/tex]
The specific heat of the metal is 0.0482 joules per gram-Celsius.
What are the requirements of any hypothesis in science?
Answer:
A scientific hypothesis must meet 2 requirements:
Explanation:
A scientific hypothesis must be testable, and;
A scientific hypothesis must be falsifiable.
Please Help !!! Calculate the density water, if it takes up 237 mL and the mass is 237 g.
Hey there !
Mass = 237 g
Volume 237 mL
Therefore:
Density = mass / Volume
D = 237 / 237
D = 1.0 g/mL
Hope this helps!
A 0.477 mol sample of O_2 gas has a volume of 11.3 L at a certain temperature and pressure. If all this O_2 were converted to ozone (O_3) at the same temperature and pressure, what is the ozone volume (in liters)? 3 O_2(g) → 2 O_3(g)
Answer:
The volume of ozone produced is 7.53 L.
Explanation:
The reaction is:
3O₂(g) → 2O₃(g) (1)
0.477 mol V=?
11.3 L
From the reaction (1) we have that 3 moles of O₂ produce 2 moles of O₃ so the volume of the ozone produced can be calculated as follows:
[tex] V_{O_{3}} = V_{O_{2}}*\frac{n_{O_{3}}}{n_{O_{2}}} = 11.3 L*\frac{2}{3} = 7.53 L [/tex]
Therefore, the volume of ozone produced is 7.53 L.
I hope it helps you!
The ozone volume (in liters) is 7.53 L.
The calculation is as follows:
The volume of the ozone in liters should be
[tex]= 11.3 \times 2\div 3[/tex]
= 7.53L
we have that 3 moles of O₂ produce 2 moles of O₃
Learn more: https://brainly.com/question/17961582?referrer=searchResults
Examine the given reaction. NH4NO3(s) → NH4+(aq) + NO3–(aq) ΔH° = 25.45 kJ/mol ΔS° = 108.7 J/mol·K Which of the given is correct about the ΔG° at 25 °C?
A)+4,360 J
B)−6,942 J
C)−4,360 J
D)+6,942 J
Answer:
B)−6,942 J /mol
Explanation:
At constant temperature and pressure, you cand define the change in Gibbs free energy, ΔG, as:
ΔG = ΔH - TΔS
Where ΔH is enthalpy, T absolute temperature and ΔS change in entropy.
Replacing (25°C = 273 + 25 = 298K; 25.45kJ/mol = 25450J/mol):
ΔG = ΔH - TΔS
ΔG = 25450J/mol - 298K×108.7J/molK
ΔG = -6942.6J/mol
Right solution is:
B)−6,942 J /molI’m having trouble with this assignment please help.
Q = m.c.AT
m = 50,0 g of iron
c = 0.450 J.g-1°C-1
AT = 10°C
Thus
Q = 50 * 0.450 * 10
Q = 225 J
Is the heat energy
Hope it helps xx
write the formula of three compounds which you know and name the elements in them
Answer:
[tex]\boxed{\sf{view \ explanation}}[/tex]
Explanation:
Compound definition:
A compound is a chemical substance formed by two or more chemically bonded elements.
Three compounds:
Water is a compound with the formula [tex]\sf H_2O[/tex].
Two hydrogen atoms and one oxygen atom is present in one molecule of water.
Sodium chloride or table salt is a compound with the formula [tex]\sf NaCl[/tex].
One sodium atom and one chlorine atom is present in one molecule of sodium chloride.
Ammonia is a compound with the formula [tex]\sf NH_3[/tex].
In one molecule of ammonia, one nitrogen atom and three hydrogen atoms are present.
Answer:
See below
Explanation:
Three compounds are:
1) [tex]\mathrm {H_{2}SO{4}}[/tex] [Sulfuric acid]
The elements in this compound are hydrogen (H) , Sulfur (S) and Oxygen (O).
2) [tex]\mathrm {NaOH}[/tex] [Sodium hydroxide]
The elements in this compound are Sodium (Na) , Oxygen (O) and Hydrogen (H).
3) [tex]\mathrm {HCl}[/tex] [Hydrochloric acid]
The elements are Hydrogen (H) and Chlorine (Cl).
What happens during an alpha decay?
Answer:
Alpha decay is a type of radioactive disintegration in which unstable atomic nucleus releases a helium nucleus or alpha particle and transform into a different element. The new element formed will be reduced by four and the atomic number will be reduced by two.
Example of alpha decay is: Uranium 238 transform into Thorium 234 with the emission of an alpha particle.
ANSWER ASAP WILL GIFT BRANILIEST Which of the following happens to a molecule of an object when the object is cooled? A Its temperature increases. B It loses kinetic energy. C Its size increases. D It moves faster.
Answer:
It loses kinetic energy.
Explanation:
The definition of heat is molecules moving fast, so it cooling would mean they slow down.
Answer:
B, It loses kinetic energy.
Explanation:
If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL
Hey there!:
Mass = 0.6 g
Density = 0.0012 g/mL
Volume = ??
Therefore :
Density = mass / Volume
0.0012 = 0.6 / V
V = 0.6 / 0.012
V = 500 mL
Hope this helps!
In ∆ABC, if sin A = and tan A = , then what is cos A?
Complete Question:
In ∆ABC, if sin A = 4/5 and tan A = 4/3, then what is cos A?
Answer:
[tex]cos A= \frac{3}{5}[/tex]
Explanation:
Given
[tex]sin A = 4/5[/tex]
[tex]tan A = 4/3[/tex]
Required
[tex]cos A[/tex]
In trigonometry;
[tex]tanA = \frac{sinA}{cosA}[/tex]
Multiply both sides by cosA
[tex]cos A * tanA = \frac{sinA}{cosA} * cos A[/tex]
[tex]cos A * tanA = sinA[/tex]
Divide both sides by tanA
[tex]\frac{cos A * tanA}{tanA} = \frac{sinA}{tanA}[/tex]
[tex]cos A= \frac{sinA}{tanA}[/tex]
Substitute values for sinA and tanA
[tex]cos A= \frac{4/5}{4/3}[/tex]
[tex]cos A= \frac{4}{5} / \frac{4}{3}[/tex]
[tex]cos A= \frac{4}{5} * \frac{3}{4}[/tex]
[tex]cos A= \frac{4 * 3}{5 * 4}[/tex]
[tex]cos A= \frac{3}{5}[/tex]
take an onion and one jam bottle insert the roots of onion in the jam bottle for five days . after five days observe the growth in the roots of onion which is submerged in jam bottle. write observation here
Answer:
It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle
Explanation:
It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle. The growth of a plant is due to the availability of the growing and dividing cells in the meristematic regions of the apical meristems. (stem cells). This site are active site for elongation and differentiation of the stem tissues. In the apical meristem of the root cells, the cells have the potential to carry out mitosis and cell division repeatedly in order to generate newer cells for extension and development of stems and leaves. With each cell division, one cell remains in the meristem which the other increases in size and differentiate due to different genomic expression to form the meristem regions which eventually becomes the stem structure.
the mass of empty cylinder is 20 gram its mass when its filled completely with water is 30 gram and its mass when its filled completely with unknown liquid is 27 gram find the density of, the unknown liquid
Answer:
≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
Explanation:
The mass of empty cylinder is 20g
The mass of water filling the cylinder = 30g - 20g = 10g
The mass of unknown liquid filling the cylinder = 27g - 20g = 7g
Density of water = 997 kg/m³
Converting this density to g/cm³ we get;
1kg = 1000g , 1m³ = 1000000cm³
So density = [tex]\frac{997000}{1000000}[/tex] g/cm³ = 0.997 g/cm³
So the volume of water occupied by 10g is;
10 × 0.997 = 9.97 cm³
This volume is also occupied by 7g of the unknown liquid.
Density = mass/volume
Density of the unknown liquid = 7g ÷ 9.97cm³ = 0.702106319 g/cm³ ≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
What is the outcome of all chemical changes when two substances are combined?
Answer:
This is called a chemical reaction. gas may form.heat may be produced and the color may change
which one of the following has the smallest atomic radius a)Mg2+ b)O2- c)Na+ d)F-
Answer:
Mg2+
Explanation:
o2- =2,8
mg2+ =2,8
na+ =2,8
f- =2,8
since they are all same it depends on protons.
mg2+ has least protons
What is ionic bond and explain it
Answer:
An ionic bond is a chemical bonding involving the attraction between oppositely charged ions
Explanation:
On the periodic table, elements from group 1 and 7 are attracted to each other and when they bond, it's called ionic bonding. This is because of their valence electrons and ions.
Answer:
Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, and is the primary interaction occurring in ionic compounds. It is one of the main types of bonding along with covalent bonding.
