A thin, 100g disk with a diameter of 8.00cm rotates about an axis through its center with 0.180J of kinetic energy.What is the speed of a point on the rim?Express your answer with the appropriate units.

The required wave speed and tension in the string are 15 m/s , 0.036 N respectively.

Speed is characterized as. The pace of progress of position of an item toward any path. Speed is estimated as the proportion of distance to the time in which the distance was covered. Speed is a scalar amount as it has just course and no extent.

(a) The wave speed is given by v=λ/T=ω/k,

where λ is the frequency, T is the period ω is the precise recurrence (2π/T), and k is the rakish wave number(2π/λ).

The displacement  has the structure y=y sin(kx+ωt), so 4k=2.0m

 furthermore, ω=30 rad/s.

Hence v=(30 rad/s)/(2.0m)=15 m/s.

b) Since the wave speed is given by v= τ/μ

, where τ is the pressure in the string and μ is the straight mass thickness of the string, the strain is

τ=μv =(1.6×10 kg/m)(15 m/s) =0.036 N.

To learn more about contrast refer to:

brainly.com/question/24507709

#SPJ4

Let the tension in the string connect. A and B be 'T' and let friction the force acting on A be fA

Now, for B,

T- fB -T' = [tex]M_{B} a[/tex]

but a = 0, since speed is constant.

∴ T- fB - T' = 0

FB = friction force on B = f = 10N.

∴ T - FB - T' = 0

given,

50N - 10N -T' = 0

or, T' = 40N

for 'A', acceleration a = 0

T' - FA = [tex]M_{A} A[/tex] = 0

or, FA = T' = 40N

∴ friction force acting on A is 40N.

Velocity is constant if both magnitude and direction do not change over time. In other words, this is when the rate of change of an object's position remains the same over a period of time. An object must have a constant speed in a constant direction. A constant direction forces an object to move in a straight line, so constant velocity means moving at a constant speed in a straight line.

Learn more about A constant speed here:- https://brainly.com/question/28592968

#SPJ4

The hitters final displacement from home plate is 60 m.

The displacement of an object is the change in the position of the object.

The displacement of an object is determined from the shortest distance between the initial position and the final position of an object.

The hitters final displacement from home plate is calculated as follows;

Δx = x₁ - x₂

where;

Δx = x₁ - x₂

Δx = 30 m  - ( - 30 m)

Δx = 30 m + 30 m

Δx =  60 m

Learn  more about displacement here: https://brainly.com/question/2109763

#SPJ1

Answer: 100% relative humidity (the air is at the saturation line).

Explanation:

Charged particles from the sun interact with the magnetic field of Earth, as well as with atoms and molecules in our atmosphere, to produce auroras, which are brief flashes of light.

The Aurora Event, also known as The Iceland Event, refers to a rare occurrence of an Aurora Borealis and a meteor shower that took place in Iceland in 2010. Space weather, which is brought on by solar activity such as solar flares and coronal mass ejections, can have an effect on the region between Earth and the sun and result in an aurora. Fast solar wind streams from coronal holes are one example of a considerably less intense occurrence that might result in active circumstances and cause auroras. The magnetic reconnection between Earth's magnetosphere and the solar wind causes the Aurora Borealis, also known as the "Northern Lights," and the Aurora Australis, often known as the "Southern Lights."

to know more about magnetic field of Earth please visit.

https://brainly.com/question/2685002

#SPJ4

The gravitational force that is acting on the object is 2.4 * 10^3 N.

We know that the gravitational force has to do with the force tat is acting on any two objects that can be found on the earth's gravitational field. We know that we can be able to obtain the gravitational force by the Newton's law.

F = G[tex]m_{1}[/tex][tex]m_{2}[/tex]/r^2

G = gravitational constant

[tex]m_{1}[/tex]and [tex]m_{2}[/tex] are the masses

r = distance

Hence we have;

F = 6.6 * 10^-11 *  1,500 * 7.35 x 10^22/(1.74 x 10^6 )^2

F = 7.27 * 10^15/3.02 * 10^12

F = 2.4 * 10^3 N

Learn more about gravitational force:https://brainly.com/question/12528243

#SPJ1

In the 3-slit interference pattern, the secondary  peak intensity is always half the principal maximum intensity. Therefore, the ratio of the peak intensity of the secondary peak to the primary peak is 1/2.

To understand why this is, consider the constructive interference that occurs at the main maxima. This occurs when the path difference of the waves reaching the screen through each slot is equal to an integer multiple of the wave's wavelength.

This gives us strong intensities at these points, which are the main maxima. On the other hand, at the second-order maximum, the path difference of the waves reaching the screen through each slit is equal to an odd multiple of half the wavelength of the wave.

This results in weaker intensity at these locations, which are secondary maxima. Since the sidelobe intensity is weaker than the main lobe, the ratio of the peak intensity of the sidelobe to the main lobe is 1/2.

Read more about waves at:

brainly.com/question/22966276

#SPJ4

The final velocity equations for elastic collisions is

[tex]$\begin{aligned}& u_1=\frac{3}{2} v_i \\& u_2=\frac{1}{2} v_i\end{aligned}$$[/tex]

A collision between two bodies in physics is referred to as an elastic collision if their combined kinetic energy stays constant. There is no net conversion of kinetic energy into other forms, such as heat, noise, or potential energy, in an ideal, fully elastic collision.

Lat their final speeds of bouncing back are u_1 and u_2 As the collision is clastic, e=1So,u_1+u_2=v_i+v_i=2 v_i

From momentum conservation, 3 m v_i-4 m v_i=4 m u_2-3 m u_1

[tex]$$\begin{aligned}& \Rightarrow \quad-2 v_i=4 u_2-3 u_1 \\& \Rightarrow 3 u_1-5 u_2=2 v_i-\text { (2) }\end{aligned}$$[/tex]

From (1) and (2),

[tex]$$\begin{aligned}u_1+u_2 & =3 u_1-5 u_2 \\\Rightarrow 2 u_1 & =6 u_2 \Rightarrow u_1=3 u_2\end{aligned}$$[/tex]

From (1),

[tex]$3 u_2+u_2=2 v_i$[/tex]

[tex]$$\text { and } \begin{aligned}\Rightarrow u_2 & =\frac{1}{2} v_i \\u_1 & =3 u_2=\frac{3}{2} v_i .\end{aligned}$$[/tex]

So,

[tex]$$\begin{aligned}& u_1=\frac{3}{2} v_i \\& u_2=\frac{1}{2} v_i\end{aligned}[/tex]

To learn more about momentum conservation visit:https://brainly.com/question/3920210

#SPJ4

This radiator's Heat radiation is 12.8 W.

Provided, the temperature of the radiator θ = 30°C

So, the absolute temperature of the radiator,

T = ( θ + 273 ) K

  = ( 30 +273 ) K

  = 303 K

Also provided, the temperature of the surrounding space, T₀ = 3 K

The emissivity of the white paint, ε = 0.89

The length of one side of the radiator, L = 0.3m and the breadth, B = 0.1m.

Now, the amount of rate of  heat transfer by a system at temperature T to a surrounding space at temperature T₀ is given by the formula,

Q = σεFA(T⁴-T₀⁴).

where A is the area of the system exposed to the surrounding, F is the view factor, σ is the Stefan-Boltzmann constant = 5.67 × 10⁻⁸Wm⁻²K⁻⁴ and σ is the emissivity of the system.

Here, the surface area of the radiator,

A = LB = (0.3m) (0.1m) = 0.03 m²

According to the question, the radiator has a full view factor to the space, i.e. we can say, the view factor in this case is, F = 1.

Substituting all known values into the equation we just mentioned we get,

Q = σεFA(T⁴-T₀⁴)

   = (5.67 × 10⁻⁸Wm⁻²K⁻⁴) (0.89) (1) (0.03 m²) [ (303K)⁴ - (3K )⁴ ]

   = 12.76 W

   ≈ 12.8 W

So, the rate of heat radiation is, Q = 12.8 W

To learn more about Rate of heat radiation, Here  :

https://brainly.com/question/14809678?referrer=searchResults

#SPJ4

Density of the object is 3333.33 kg/m³.

Density can be defined as the ratio of the mass of a body to its volume.

From Archimedes principle,

Rd = W/U = D/D'

Where Rd = relative density,

W = weight of the object in air,

U = upthrust in water,

D = Density of the object,

D' = Density of water.

W/U = D/D'

Density (D) of the solid can be calculated by the equation,

D = D'(W/U)

As we have,

W = 5.0 N,

U = 5.0 -3.5 = 1.5 N,

D' = 1000 kg/m³

Since U = lost in weight = weight in air - weight in water

D = 1000(5/1.5)

D = 3333.33 kg/m³

Thus the density of the solid object is 3333.33 kg/m³

To know more about Density,

https://brainly.com/question/28981250

#SPJ4

The figure shows a block of mass m resting on a 20 degree slope. As the system is at rest For the equilibrium of 2 kg block

What is mass ?

A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely considered to be tied to the amount of matter in a physical body.A measurement of how much matter is present in or makes up a physical body. In classical mechanics, an object's mass is crucial to Newton's laws of motion because it influences the force needed to accelerate it and, consequently, how much inertia it has.

[tex]$$\begin{aligned}& T-2 k g \times 9.8 \mathrm{~m} / \mathrm{s}^2=0 \\& T=2 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{s}^2=19.6 \mathrm{~N}\end{aligned}$$[/tex]

For the equilibrium of second block

[tex]$$\begin{aligned}& T=m g \sin 20^0+f \\& T=m g \sin 20^0+\mu_s R \\& T=m g \sin 20^0+\mu_s m g \cos 20^0 \\& T=m\left(g \sin 20^0+\mu_s g \cos 20^0\right) \\& m=\frac{T}{\left(g \sin 20^0+\mu_s g \cos 20^0\right)} \\& m=\frac{19.6 N}{\left(9.8 \mathrm{~m} / \mathrm{s}^2 \sin 20^0+0.64 \times 9.8 \mathrm{~m} / \mathrm{s}^2 \cos 20^0\right)} \\& m=\frac{19.6 \mathrm{~N}}{9.25 \mathrm{~m} / \mathrm{s}^2}=2.12 \mathrm{~kg}\end{aligned}$$[/tex]

To learn more about mass visit: https://brainly.com/question/19694949

#SPJ4

When connected to bromine, Br, the elements mentioned below are most likely to form a nonpolar covalent bond.

Given that, a non-polar covalent bond with bromine is required.

A non-polar covalent bond is a type of chemical bond that is created when two atoms share electrons evenly.

As a result, the nearby atoms' shared electron count must be the same.

Additionally, the difference in electronegativity ought to be essentially nonexistent.

The only one of the five elements that meets every requirement is Br.

Additionally, because the shared pair of electrons is the same, a non-polar covalent connection is created between two atoms of the same element.

Thus, choice two is right.

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed.

learn more about covalent bond here:

https://brainly.in/question/16518623

#SPJ4

When connected to bromine, Br, the elements mentioned below are most likely to form a non-polar covalent bond.

Non-polar covalent bond:

The bond that forms between atoms with identical electronegativity values is known as a non-polar covalent bond.

Given that,

         a non-polar covalent bond with bromine is required.

A non-polar covalent bond is a type of chemical bond that is created when two atoms share electrons evenly.

As a result, the nearby atoms' shared electron count must be the same.

Additionally, the difference in electronegativity ought to be essentially nonexistent.

The only one of the five elements that meet every requirement is Br.

Additionally, because the shared pair of electrons is the same, a non-polar covalent connection is created between two atoms of the same element.

Learn more about non-polar covalent bonds here

https://brainly.com/question/12603366

#SPJ4

After extinguishing a fire on the first floor of a two-story balloon-framed house, the best action for crews is to immediately open the walls and check for fire in the basement, second floor, and attic.

The vertical struts of the outer wall are continuous from the foundation to the roof with a balloon frame structure. When the roof collapses into a structure, it can provide a watertight cover over a buried fire. Heavy wood is more stable than lightweight structures in fire conditions.

Marion of the building is surrounded by balloons, from the foundation to the eaves line he extends upwards more than two stories. A mansard or mansard roof is his four-sided gambrel-style hipped roof characterized by his two slopes on either side, the lower slope pierced with dormer windows and angled more steeply than the upper.

Learn more about The basement here:- https://brainly.com/question/24386685

#SPJ4

Objects in the Kuiper belt are made mostly of rock and metal. This statement is  not true.

The Kuiper Belt, a donut-shaped collection of icy worlds beyond Neptune's orbit, contains both Arrokoth and Pluto. These icy objects, commonly known as Kuiper Belt objects (KBOs), may number in the millions in this far-off area of the solar system.

Remains from the early history of the solar system are found in the Kuiper Belt. Though it is more of a thick disc than a thin belt, it has likewise been sculpted by a large planet.

The Oort Cloud, a much further region of frozen, comet-like bodies that surrounds the solar system and includes the Kuiper Belt, should not be mistaken with the Kuiper Belt. It is believed that comets originate from both the Kuiper Belt and the Oort Cloud.

Learn more about Kuiper Belt  here:

https://brainly.com/question/25583240

#SPJ1

Zeeman-type spin splitting in non-magnetic three-dimensional compounds: materials prediction and electrical control.

The Zeeman Effect:

The discussion of the atomic energy levels, their transitions, and the related spectral lines has implicitly assumed that the atom is not affected by magnetic fields. The atomic energy levels are split into a greater number of levels and the spectral lines are likewise split when magnetic fields are present. The Zeeman Effect is referred to as this splitting.

The non-magnetic Zeeman effect has only been predicted and observed in two-dimensional molecules, despite its potential for device application. We show that Zeeman-type spin splitting may also occur in non-centrosymmetric three-dimensional compounds and that this splitting can be controlled by altering the direction in which these compounds' slabs expand. We identify the necessary elements for this effect: A general k-point must have the following characteristics:

(i) non-centrosymmetric, including polar and non-polar point groups;

(ii) valence band maximum or conduction band minimum;

(iii) non-time-reversal-invariant momentum; and

(iv) zero magnetic moment.

We do a material screening to systematically look for these systems in the aflow-ICSD database using these criteria as filters. 20 material candidates with the Zeeman-type effect are discovered.

We also discovered that an external electric field, which in turn can cause a metal-insulator transition, can influence spin-splitting in restricted systems. We propose a spin-filtering device based on the Zeeman-type phenomenon in three-dimensional compounds.

Learn more about Zeeman Effect here

https://brainly.com/question/13046435

#SPJ4

The angle that would produce the maximum height is 60°C. Option C

We know that a projectile is said to be obtained when we launch the body at an angle. In this case, we are told that the particle has been launched to the horizontal and the object is projected at a particular angle.

We want to find out the maximum height of the object and this would make us to look at the angle of the projection vy that would produce the greatest maximum height. This would be at an angle of  60°C to the horizontal and leads to the greatest possible height attained.

Learn more about maximum height:https://brainly.com/question/6261898

#SPJ1

The linear acceleration of the spool below (mass m, moment of inertia i) if it is rolling without slipping: A spool of mass m and moment of inertia I (around its center) is free to roll without slipping on a table. It has an inner radius of r and an outer radius of R.

In mechanics, acceleration is the charge of the alternate velocity of an item with recognition of time. Accelerations are vector portions. The orientation of an item's acceleration is given by the orientation of the internet pressure acting on that item.

Acceleration, is the price at which speed modifications with time, in terms of each pace and path. A point or an object transferring in an instant line is accelerated if it quickens or slows down. movement on a circle is multiplied although the rate is constant due to the fact the path is always converting.

Learn more about acceleration here:

https://brainly.com/question/460763

#SPJ4

Answer:

a) >26.7 N

b)  >13.3 N

Explanation:

a)  Fg = (17 kg)(9.8 m/s²) = 166.6 N

Fnormal = Fg = 166.6 N

Ff = μFn = 0.16(166.6 N) = 26.7 N

Janitor needs to push >26.7 N to overcome the Force of friction (Ff) on a horizontal floor.

b)  You have to determine Fn on the object by figuring out the y-component of Fg.

Fn/Fg = sin30

Fn = sin30(166.6 N) = 83.3 N

Now you can find Ff.

Ff = μFn = 0.16(83.3 N) = 13.3 N

Janitor needs to push >13.3 N down the incline to overcome Ff

Makes sense that he has to push less down an incline.

The roller coaster is going with 15.34 m/s when it reaches the bottom.

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another.

According to the question, potential energy of the roller coaster at initial position = mass * acceleration due to gravity* height = mgh

Let the speed of the roller coaster at the bottom = v.

So, kinetic energy at the bottom = 1/2 * mass * speed^2 = 1/2 mv^2

From conservation of energy:

mgh = 1/2mv^2

v= √( 2gh)

= √( 2 × 9.8 × 12) m/s

= 15.34 m/s.

Hence, the speed of it at the bottom is 15.34 m/s.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

Answer:

Gamma Ray but read below

Explanation:

All of the types of electromagnetic radiation listed can pass through Earth's atmosphere, although some types are absorbed or blocked more easily than others.

Visible light, infrared radiation, and radio waves are able to pass through the atmosphere relatively easily, while gamma rays are more likely to be absorbed.

This is because gamma rays have a higher energy than the other types of radiation, so they are more easily absorbed by the atoms and molecules in the atmosphere.

Answer:

Gamma Rays

Explanation:

It has the highest possible frequency lowest wavelength and the most energetic charge. Its travels at the speed of light and is highly penerative

In a series resonant LCR circuit, the voltage across R is 100 volts and R= 1Ω with C = 2μF. The resonant frequency ω is 200 rad/s. At resonance, the voltage across L is D) 2.5 × 10⁵ volt.

given that :

V = 100 v

R = 1Ω

ω = 200 rad/s

C = 2μF

ω²  = 1 / LC

(200)² = 1/ L × 2 × 10⁶

L = 12.5 H

current = 100 A

now, at resonance ,

voltage across the L is equals to voltage across C

voltage across L = 100 × ( 1 / 200  × 2 × 10⁶)

voltage across L =  2.5 × 10⁵ volt.

To learn more about voltage here

https://brainly.com/question/16042900

#SPJ4

A laser beam that is traveling through air can deliver a maximum power of 1.84 x 106 W.

What is the beam's maximum power output?

The following formula is used to determine the maximum power that an air-propagating laser beam with a diameter of 1.4 cm can deliver:

P = ¹/₂ CεAE₀²

where;

A is the wire's surface area.

C is the permittivity of open space, and is the speed of light.

The largest electric field is E0.

A = πd² / 4

A = π ( 0.014² ) / 4

A = 1.54 x 10⁻⁴ m²

The following calculations are used to determine the laser beam's maximum power:

P is equal to half of (3 x 108 x 8.85 x 1012 x 1.54 x 104) x (3 x 106)2.

P = 1.84 x 10⁶ W

learn more about maximum power here:

https://brainly.com/question/29899979

#SPJ4

The maximum power that can be delivered by the laser beam propagating through the air is 1.84 x 10⁶ W.

What is the beam's maximum power output?

The following formula is used to determine the maximum power that an air-propagating laser beam with a diameter of 1.4 cm can deliver:

P = ¹/₂ CεAE₀²

where;

         A is the area of the wire

         C is the speed of light        

         ε is the permittivity of free space

         E₀ is the maximum electric field

We know that,

                     A = πd² / 4

                     A = π ( 0.014² ) / 4

                     A = 1.54 x 10⁻⁴ m²

The maximum power that can be delivered by the laser beam is calculated as follows;

           P = ¹/₂ (3 x 10⁸ x 8.85 x 10⁻¹² x 1.54 x 10⁻⁴) x (3 x 10⁶)²

           P = 1.84 x 10⁶ W

Learn more about maximum power here:

brainly.com/question/17329956

#SPJ4

The probability mass function is obtained as:

[tex]p(x=x)=12 c_x \quad(0.4)^x(1-0.4)^{1 x-x} ; x=0,1,2 \ldots .12[/tex]

Outcome is,

[tex]n=12 \\ p=0.4[/tex]

Let X be discrete random variable which takes value [tex]$i=1,2 \ldots$[/tex].

Now the probability of mass function at point is is given by:

[tex]p(x=p)=p\left(x_i\right)=F\left(x_i\right)-F\left(x_{(i-1)}\right)[/tex]

By using Bernoulli's random variable:

[tex]P(x=x)=p^x(1-p)^{1-x} x=0,1[/tex]

where as [tex]$x=0 \Rightarrow$[/tex] corresponds to failure

[tex]$x=1 \Rightarrow$[/tex] correspond to Success

p is probability function of Success.

Therefore the total number of Success in ' n ' independent Bernoulli trials is Sum of ' n ' bernoulis random variable which gives binomial distribution.

By using multiplication rule the probability of observing ' x 'Successes in ' n ' independent bernoulli trials it can be written as:

[tex]\underbrace{p \times p \times \ldots \times p}_{x \text { times }} \times(\underbrace{() 1-p) \times(1-p) \times \ldots \times(1-p)}_{n-x \text { times }}[/tex]

The probability mass function :

[tex]p(x=x)=12 c_x \quad(0.4)^x(1-0.4)^{1 x-x} ; x=0,1,2 \ldots .12[/tex]

where as

[tex]n=12 \\ p=0.4[/tex]

For more such question on probability.

https://brainly.com/question/25839839

#SPJ4

Note:- The question is as follow,

Consider the probability space [tex]$(S, M, P)$[/tex] that models the observed proportion of successes in n independent Bernoulli trials with probability of success equal to p. For example, given n=12 and p=0.4, the outcome [tex]\frac{5}{12}=.41 \overline{6} \:in $(S, M, P)$[/tex] should have the same probability as the outcome of 5 successes in 12 independent Bernoulli trials with probability of success equal to 0.4. Give a formula for the density function f(s) for this probability space in terms of the density [tex]$f_{n, p}$[/tex] of the binomial distribution with size n and probability p. ( points)

Understanding an object's structure and function requires observation at a variety of wavelengths.

This is due to the fact that we have just lately been able to view the complete electromagnetic spectrum of the universe.There are objects in our universe that emit a wide variety of radiation having wavelengths either being too short or long for human eyes to see.

Astronomers can learn something distinctive about an item by examining its light at various wavelengths.Astronomers may see "the broad picture" of what's actually happening with that object by examining all available wavelengths and developing models that account for everything those photographs show.

To know more about wavelength visit:

https://brainly.com/question/4112024

#SPJ4

If truck and car moving with same velocity then the car will cover less distance , if the force of breaking is same .

The velocity of the truck and car are given to have equal velocity ,

the braking force is also equal ,

we know that , the mass of the truck(M)  is greater than mass of the car(m) ;

So , the truck will have more momentum ;

we know that momentum is = mass × velocity ;

let the velocity of car and truck be "v" ;

substituting the values in the momentum formula ;,

we get ; Mv > mv ;

Therefore , the car will cover less distance .

Learn more about Velocity here

https://brainly.com/question/13447926

#SPJ4

Based on the principle of energy conservation. Because rock is hotter than water, a given amount of heat is lost by rock while water gains the same amount of heat.

Because a sun-warmed rock is placed in a chilly pool of water. According to the law of conservation of energy, which is found in physics and chemistry, the total energy of an isolated system is constant and is said to be conserved over time. This first-proposed-and-tested law states that energy can only be converted or moved from one form to another; it cannot be created or destroyed. In thermodynamics, heat is described as a kind of energy that crosses a thermodynamic system's boundary as a result of a temperature.

Learn more about energy conservation here

https://brainly.com/question/13949051

#SPJ4

depicts three revolving disks with identical mass. Rank the rotating kinetic energy of each object, Ka to Kc, in order of largest to smallest.

Sort the rotational kinetic energy of the items in order of highest to lowest. The mass of each sphere is the same. Calculate the angular velocity of a rotating system; Apply the principle of mechanical energy conservation to the analysis of systems that are both spinning and translating. The loss in gravitational potential energy, which is the same for all 4 items and equal to mg-h, where h represents height, equals the increase in total kinetic energy. Rotation of four bars of equal mass around their centers. Rank the rotational kinetic energy of each object in order from largest to lowest. K 1 to K4.

to know more about kinetic energy please visit.

https://brainly.com/question/999862

#SPJ4

No, the activation energy for a forward reaction is not equal to the activation energy for the reverse of the same reaction.

In order for compounds to undergo a chemical reaction, a certain amount of energy is required, known as the activation energy. The unit of measurement for a reaction's activation energy (Ea) is either joules per mole (J/mol), kilojoules per mole (kJ/mol), or kilocalories per mole (kcal/mol). You can think of activation energy as the size of the potential barrier between the minima of the potential energy surface related to the initial and final thermodynamic states, which is also referred to as the energy barrier. If the system temperature is high enough, there should be a sizable number of molecules with translational energies that are equal to or higher than the activation energies.

Learn more about  activation energy here:

https://brainly.com/question/11334504

#SPJ4

Explanation:

To find the acceleration of the rocket, we need to use the equations of motion for constant acceleration.

We know that the bolt was dropped 5 seconds after the rocket was launched, and that it took 10 seconds for the bolt to hit the ground. This means that the bolt was in free fall for 10 - 5 = <<10-5=5>>5 seconds.

We can use the equation d = 1/2 * a * t^2 to find the acceleration of the bolt. We know that the bolt fell a distance of 10 meters in 5 seconds, so we can plug those values into the equation to get: 10 = 1/2 * a * 5^2. Solving for a gives us a = 2 * 10 / 5^2 = 2 * 10 / 25 = 0.8.

Since the bolt was in free fall, its acceleration was due to gravity, which is about 9.8 meters per second squared. This means that the rocket must have had an acceleration greater than 9.8 meters per second squared in order to cause the bolt to fall off of it.

Therefore, the rocket's acceleration must have been greater than 0.8 meters per second squared. However, we cannot say exactly what the acceleration was without knowing more information about the rocket and its launch conditions.

The acceleration of the rocket is 197.5 m/s² if the bolt hits the ground 10.0 s later.

A branch of physics called kinematics, which was evolved from classical mechanics, defines how points, bodies, and systems of bodies (groups of objects) move without taking into account the forces that propel them. The discipline of kinematics is sometimes thought of as a subfield of mathematics and is sometimes referred to as the "geometry of motion." Any known values of the location, velocity, and/or acceleration of points inside the system are declared as initial conditions for a kinematics issue, together with the geometry of the system. The location, velocity, and acceleration of any unidentified system components can then be calculated using geometrical considerations. Kinematics, not kinematics, is the study of forces and their effects on physical objects. For further information, visit.

Given,

time of the bolt = 10-5 =5s

acceleration due to gravity =9.8m/s²

The height of the bolt s = ut+1/2at²

s = 0+ 1/2 ×9.8×5²

s = 122.5m

We cannot find the acceleration of the rocket without its final velocity (velocity of the rocket at the time of fall of bolt). Therefore Consider the final velocity of the Rocket is 220m/s

Then,

v² = u² + 2as

220² = 0 +2×a×122.5

48400 = 245 a

a = 197.5 m/s²

To know more about Acceleration :

https://brainly.com/question/12550364

#SPJ2.

A 1500 kg car traveling at an unsafe speed of 100 km/h skids to a halt, leaving 85-m-long skid marks. the coefficient of kinetic friction between the car's tires and the road is 0.46.

given that :

mass , m = 1500 kg

speed = 100 km / h =  27.77 m/s

now, using the below expression as :

v² = u² - 2as

final speed = 0

a = u² / 2as

a = ( 27.77 )² / 2 × 85

a = 4.53 m/s²

the coefficient of kinetic friction :

μ = a / g

μ = 4.53 / 9.8

μ = 0.46

To learn more about kinetic friction here

https://brainly.com/question/29645739

#SPJ4