A system of equations is shown below.
y=4x
y=x-6
what is the x-value in the solution to the system?

Jana, because she has the highest ratio since 8/10 is greater than 9/12.

A ratio is a comparison of two numbers or quantities expressed in relation to each other. It represents the relative size or magnitude of one quantity with respect to another. Ratios are typically written as a fraction, with the first number being the numerator and the second number being the denominator, and can also be expressed as a decimal or percentage.

Batting average is a statistical measure used in baseball to evaluate a player's performance at the plate. It is calculated as the ratio of a player's total number of hits to their total number of at-bats (the number of times they attempt to hit the ball).

In the given question,

A higher batting average indicates a better performance, since it means the player is successfully hitting the ball more often.

In this case, we are given the number of hits and attempts for two players, Jana and Tasha. To compare their batting averages, we need to calculate the ratio of their hits to their attempts.

Jana has hit the ball 8 times out of 10 attempts, so her batting average is 8/10 = 0.8.

Tasha has hit the ball 9 times out of 12 attempts, so her batting average is 9/12 = 0.75.

To determine which player has the better batting average, we compare their ratios. Since 0.8 is greater than 0.75, Jana has the higher ratio and therefore the better batting average.

So, the answer is Jana, because she has the highest ratio (8/10 = 0.8), which means she has the better batting average compared to Tasha (9/12 = 0.75).

To know more about ratios, visit:

https://brainly.com/question/13419413

#SPJ1

Answer:

[tex]\large\boxed{\textsf{x = 7}}[/tex]

Step-by-step explanation:

[tex]\textsf{For this problem, we are asked to find the value of x.}[/tex]

[tex]\textsf{We should simply isolate the x so that it's only on one side.}[/tex]

[tex]\large\underline{\textsf{How?}}[/tex]

[tex]\textsf{Simply use the Distributive Property for the right side of the equation.}[/tex]

[tex]\textsf{Simplify the equation to where x is by itself.}[/tex]

[tex]\large\underline{\textsf{What is the Distributive Property?}}[/tex]

[tex]\textsf{The Distributive Property is a Property that allow us to distribute expressions further.}[/tex]

[tex]\textsf{Commonly, the form is a(b+c); Where b and c are multiplied by a.}[/tex]

[tex]\large\underline{\textsf{Use the Distributive Property;}}[/tex]

[tex]\mathtt{5x-2=3(x+4)}[/tex]

[tex]\mathtt{5x-2=(3 \times x)+(3 \times 4)}[/tex]

[tex]\mathtt{5x-2=3x+12}[/tex]

[tex]\large\underline{\textsf{Add 2 to Both Sides of the Equation;}}[/tex]

[tex]\mathtt{5x-2 \ \underline{+ \ 2}=3x+12 \ \underline{+ \ 2}}[/tex]

[tex]\mathtt{5x=3x+14}[/tex]

[tex]\large\underline{\textsf{Subtract 3x from Both Sides of the Equation;}}[/tex]

[tex]\mathtt{5x-3x=3x-3x+14}[/tex]

[tex]\mathtt{2x=14}[/tex]

[tex]\large\underline{\textsf{Divide the Whole Equation by 2;}}[/tex]

[tex]\mathtt{\frac{2x}{2} = \frac{14}{2} }[/tex]

[tex]\large\boxed{\textsf{x = 7}}[/tex]

Answer:

[tex] \sf \: x = 7[/tex]

Step-by-step explanation:

Now we have to,

→ Find the required value of x.

The equation is,

→ 5x - 2 = 3(x + 4)

Then the value of x will be,

→ 5x - 2 = 3(x + 4)

→ 5x - 2 = 3(x) + 3(4)

→ 5x - 2 = 3x + 12

→ 5x - 3x = 12 + 2

→ 2x = 14

→ x = 14 ÷ 2

→ [ x = 7 ]

Hence, the value of x is 7.

By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).

The possible error in measuring the radius of the sphere is 0.5 in

The formula for the volume of a sphere is given by V(r) = 4/3πr³

The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³

When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:

V(72.5) = 4/3π(72.5)³

The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:

V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³

Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).

To know more about the maximum error: https://brainly.com/question/13370015

#SPJ11

The parking lot has a width of around [tex]0.937[/tex] meters.

This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.

100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.

[tex]3760 cm = 37.6 m[/tex]

Solve for the width,

[tex]area = (1/2) * (base1 + base2) * height[/tex]

where,

base1 [tex]= 73.4 m[/tex]

base2 [tex]= 37.6 m[/tex]

area [tex]= 2,930.4[/tex] square meters

Let's solve for the height first,

[tex]height = 2 * area / (base1 + base2)[/tex]

[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]

[tex]height = 2 * 2,930.4 / 111[/tex]

[tex]height = 56.16 m[/tex]

We nowadays can apply the algorithm to determine the width.

[tex]width = (area * 2) / (base1 + base2) * height[/tex]

[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]

[tex]width = 5856.8 / 111 * 56.16[/tex]

[tex]width = 5856.8 / 6239.76[/tex]

[tex]width = 0.937[/tex]

Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.

To know more about meters visit:

https://brainly.com/question/22552981

#SPJ1

The rate of change of the distance for limousine is less than the rate of change of the convertible.

How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.

In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.

The equation of the distance travelled by the convertible is given as:

y = 35x

The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).

The slope is given as:

slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30

Using the point slope form:

y - 30 = 30(x - 1)

y = 30x

So the equation of the limousine is y = 30x.

Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.

Hence, the rate of change of the limousine is less than the rate of change of the convertible.

Learn more about rate of change here:

https://brainly.com/question/29181502

#SPJ1

The mean number of burps after drinking root beer is between 0.66 and 4.24 burps fewer than after drinking cola.

Mean: The "average" number obtained by adding all data points and dividing the total number of data points by the total number of data points.

Part A: A paired t-test can be used to see if there is a significant difference in the number of burps after drinking root beer versus cola. The null hypothesis states that there is no difference in the mean number of burps between the two beverages, whereas the alternative hypothesis states that there is. Using a two-tailed test with a significance level of = 0.05, we find that the t-value is -3.365 and the p-value is 0.003. We reject the null hypothesis because the p-value is less than the significance level and conclude that there is a significant difference in the mean number of burps between root beer and cola.

Part B: We can use the paired t-test formula to generate a 95% confidence interval for the difference in the mean number of burps between root beer and cola:

(xd - d) / (sd / n) t

where xd represents the sample mean difference, d represents the hypothesised population mean difference (which is 0), sd represents the sample standard deviation of the differences, and n represents the sample size.

We calculate the sample mean difference to be -2.45 and the sample standard deviation of the differences to be 2.69 using the data in the table. We get a t-value of -3.365 with 19 degrees of freedom after plugging in these values. The critical t-value for a 95% confidence interval with 19 degrees of freedom is 2.093, according to a t-distribution table.

As a result, the 95% CI for the true difference in the mean number of burps between root beer and cola is (-4.24, -0.66). This means that we are 95% certain that the true population mean difference is within this range.

To know more about Mean Number Visit:

https://brainly.com/question/21800892

#SPJ1

The following characteristics of racional decimal number abstraction apply: Conmutative property: The order of the remaining rational decimal numbers has no bearing on the operation's outcome,

Proprietary property: The racional decimal numbers may remain in various groups without affecting the operation's ultimate outcome, i.e., (a - b) - c = a - (b - c). Distributive property: Subtracting one racional decimal number from a sum of racional decimal numbers equals the sum of the subtractions of each one of them, or a - (b + c) = a - b - c. Neutral element: If a racional decimal number is left at zero, the outcome is the same number, i.e., a - 0 = a. Estas propiedades son útiles para simplificar y realizar cálculos más complejos con números racionales decimales.

learn more about  numbers here:

https://brainly.com/question/17429689

#SPJ4

Answer:

The solution set is (13,− 32). A quadratic equation of the form x 2= k can be solved by factoring with the following sequence of equivalent equations.

Step-by-step explanation:

The greater number is [tex]$n^3+8$[/tex]

Let x be the greater number and y be the smaller number. We know that x-y=8.

We are also given that the smaller number is n³.

So we can set up the equation:

x = y + 8

x = n³ + 8

Therefore, the greater number is [tex]$n^3+8$[/tex].

The greater number is given as n³ + 8. If the smaller number we get is represented by the n³,  then by adding 8 to that value gives the greater number. The difference between the two numbers is always going to be 8, regardless of the value of n.

Learn more about numbers

https://brainly.com/question/25734188

#SPJ4

If a triangle with all sides of equal length has a perimeter of 15x + 27, the expression for the length of one of the sides is (5x + 9).

The perimeter of a triangle is the sum of the lengths of all three sides. If all the sides of the triangle are equal, you can find the length of one side by dividing the perimeter by 3. Here, the perimeter is given as 15x + 27.

Therefore, the length of one side will be (15x + 27) / 3 = 5x + 9. Hence, an expression for the length of one of the sides is (5x + 9).

Learn more about expression here: brainly.com/question/1859113.

#SPJ11

Answer:

12

Step-by-step explanation:

i think its right

(a) The probability that exactly two cars finish the race is 0.0512.

(b) The probability that at most two cars finish the race is 0.05792.

(c) The probability that at least three cars finish the race is 0.94208.

(a) To determine the probability that exactly two cars finish the race, we have to use binomial distribution. In this case, we have n = 5 trials, and p = 0.8 is the probability that a car finishes the race (1 - 0.2). Using the binomial distribution formula:

P(X = k) = (nCk)(p^k)(1 - p)^(n - k)

Where X is the number of cars that finish the race, we get:

P(X = 2) = (5C2)(0.8²)(0.2)³= (10)(0.64)(0.008)= 0.0512

Therefore, the probability that exactly two cars finish the race is 0.0512.

(b) To determine the probability that at most two cars finish the race, we have to calculate the probabilities of 0, 1, and 2 cars finishing the race and add them up.

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)= (5C0)(0.8⁰)(0.2)⁵ + (5C1)(0.8¹)(0.2)⁴ + (5C2)(0.8²)(0.2)³= 0.00032 + 0.0064 + 0.0512= 0.05792

Therefore, the probability that at most two cars finish the race is 0.05792.

(c) To determine the probability that at least three cars finish the race, we can calculate the probability of 0, 1, and 2 cars finishing the race and subtract it from 1, which gives us the probability of at least three cars finishing the race.

P(X ≥ 3) = 1 - [P(X = 0) + P(X = 1) + P(X = 2)]= 1 - (0.00032 + 0.0064 + 0.0512)= 0.94208

Therefore, the probability that at least three cars finish the race is 0.94208.

Learn more about binomial distribution here: https://brainly.com/question/24756209

#SPJ11

A right square pyramid formed by the junction of the solid would have a square-shaped cross section.

This is thus because a square pyramid has four triangular sides that meet at a shared vertex on its square base. The cross section of a pyramid formed when a plane meets it parallel to the base and perpendicular to one of the triangular sides is a square. Because the pyramid's base is square, the intersecting plane will cut all four of the triangle faces at the same distance from the peak, giving the pyramid a square shape.

Learn more about right angle triangles here:

brainly.com/question/3770177

#SPJ1

Answer:

P= 40 ft

Step-by-step explanation:

Perimeter is the sum of all the lengths

So,

Perimeter= 6+4+15+10ft

= 35ft

Nearest ten can be 40ft or 30ft

If you succeed In understanding then kindly mark my answer the brainliest. Thank you :)

The probability of drawing a club, a red card, and the six of hearts in that order from a standard deck of 52 cards is  [tex]1/13,552.[/tex]

This is because the probability of drawing a club is 1/4, and the probability of drawing a red card is 1/2, and the probability of drawing the six of hearts is 1/52.
Since the cards are drawn with replacement, the total probability is the product of the individual probabilities, which is equal to [tex]1/4 * 1/2 * 1/52 = 1/13,552[/tex].
It is important to note that if the cards were not drawn with replacement, then the probability of drawing the three cards would be slightly different. The total probability would be equal to [tex]1/4 * 1/2 * 1/51 = 1/12,600.[/tex]
It is also important to note that since this is a probability question, the answer can be expressed as a decimal or percentage. In decimal form, the probability of drawing the three cards is 0.000074, and in percentage form, the probability of drawing the three cards is 0.0074%.

for such more questions on probability

https://brainly.com/question/24756209

#SPJ11

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

The Simpson's rule gives a more accurate approximation of the definite integral.

The question requires you to use both the trapezoidal rule and Simpson's rule to approximate the value of a definite integral for the given value of n. Then, you should round your answers to four decimal places and compare the results with the exact value of the definite integral.Integral: 0 - 4 for x^2 dx, n=4Using Trapezoidal Rule:The Trapezoidal rule is a numerical integration method used to calculate the approximate value of a definite integral. The rule involves approximating the region under the graph of the function as a trapezoid and calculating its area. The formula for Trapezoidal Rule is given by:∫baf(x)dx≈h2[f(a)+2f(a+h)+2f(a+2h)+……+f(b)]whereh=b−anUsing n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore,x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/2)[f(x0) + 2f(x1) + 2f(x2) + 2f(x3) + f(x4)](1/2)[0 + 2(1) + 2(4) + 2(9) + 16] = 37

Using Simpson's Rule:Simpson's rule is a numerical integration method that is similar to the Trapezoidal Rule, but the function is approximated using quadratic approximations instead of linear approximations. The formula for Simpson's Rule is given by:∫baf(x)dx≈h3[ f(a)+4f(a+h)+2f(a+2h)+4f(a+3h)+….+f(b)]whereh=b−an, and n is even.Using n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore, x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/3)[f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)](1/3)[0 + 4(1) + 2(4) + 4(9) + 16] = 20Comparing the results with the exact value of the definite integral, we have:Integral 0 - 4 for x^2 dx = ∫4.0x^2 dx = [x^3/3]4.0 - [x^3/3]0 = 64/3 ≈ 21.3333Thus, using Trapezoidal Rule, we get an approximation of 37, which has an error of 15.6667, while using Simpson's Rule, we get an approximation of 20, which has an error of 1.3333. Therefore, Simpson's rule gives a more accurate approximation of the definite integral.

Learn more about Approximation

brainly.com/question/30707441

#SPJ11

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

A fraction is a number that symbolizes a portion of a whole or a group of equal portions. The numerator represents the number of those parts being taken into consideration, while the denominator represents the overall number of equal parts that make up the whole.

given

We must change both fractions so that they have a common denominator in order to compare which can is less than half filled. 10 and 8 have a least common multiple (LCM) of 40.

20/40 is equivalent to 1/2.

So,

4/10 is equal to (4/10) x (4/4) Equals 16/40.

The formula for 5/8 is (5/8) x (5/5) = 25/40.

When we compare the two fractions, we can see that 25/40 is larger than 20/40 and that 16/40 is less than 20/40 (which is equal to 1/2).

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

Answer:

Step-by-step explanation:

kernel composition rules 2 1 point possible (graded) let and be two vectors of the same dimension. use the the definition of kernels and the kernel composition rules from the video above to decide which of the following are kernels. (note that you can use feature vectors that are not polynomial.) (choose all those apply. )

Answer:

5.333 hours

Step-by-step explanation:

We know

4 Pipes fill a tank in 16 hours.

How long will it take to fill the tank if 12 pipes of the same dimensions are used?

We Take

16 x 1/3 = 5.333 hours

So, it takes about 5.333 hours to fill the tank.

Answer:

3x, 4x | 5, 3

Step-by-step explanation:

The result (recurrent value), A = sum j=1 to 89 ln(j), is true for every n. This is the desired result.

As in T(n) = T(n/2) + n, T(0) = T(1) = 1, a recurrence or recurrence relation specifies an infinite sequence by explaining how to calculate the nth element of the sequence given the values of smaller members.

We can start by proving the base case in order to demonstrate the first portion through recurrence. Let n = 1. Next, we have:

Being true, ln(a1) = ln(a1). If n = k, let's suppose the formula is accurate:

Sum j=1 to k ln = ln(prod j=1 to k aj) (aj)

Prod j=1 to k aj * ak+1 = ln(prod j=1 to k+1 aj)

(Using the logarithmic scale) = ln(prod j=1 to k aj) + ln(ak+1)

Using the inductive hypothesis, the property ln(ab) = ln(a) + ln(b)) = sum j=1 to k ln(aj) + ln(ak+1) = sum j=1 to k+1 ln (aj)

(b), we can use the just-proven formula:

A = ln(1, 2,...) + ln + ln (89)

= ln(j=1 to 89) prod

sum j=1 to 89 ln = ln(prod j=1 to 89 j) (j).

To know more about hypothesis visit:-

https://brainly.com/question/29519577

#SPJ1

Three numbers have a product of 115 and a sum of 3(√115), which is the smallest possible sum.

In mathematics, a positive number is any number that is greater than zero. This includes all numbers that are written without a minus sign or are explicitly denoted as positive, such as 1, 2, 3, 4, 5, and so on

To find three positive numbers whose product is 115 and whose sum is as small as possible, we can use the AM-GM inequality. In other words, if we have three positive numbers x, y, and z, then:

(x + y + z)/3 ≥ (xyz)^(1/3)

If we rearrange this inequality, we get:

x + y + z ≥ 3(√(xyz))

Now, let's apply this inequality to the given problem. We want to find three positive numbers x, y, and z whose product is 115 and whose sum is as small as possible. Therefore, we want to minimize x + y + z while still satisfying the condition xyz = 115.

Using the AM-GM inequality, we have:

x + y + z ≥ 3(√(xyz)) = 3(√115) ≈ 16.75

Therefore, the sum of the three numbers is at least 16.75. To find three numbers that achieve this minimum sum, we can use trial and error or solve the system of equations:

xyz = 115

x + y + z = 3(√115)

One solution to this system is:

x = √(115/3)

y = √(115/3)

z = 3(√(115/3)) / 5

These three numbers have a product of 115 and a sum of 3(√115), which is the smallest possible sum.

To know more about positive numbers visit:

https://brainly.com/question/1149428

#SPJ1

The complete question is Find three positive numbers whose product is 115.

I can give you with a general explanation of the functions of muscles, bones, and sensitive organs, as well as how they work together.

Muscles are responsible for movement and give the force needed to move bones. They're attached to bones via tendons and work in dyads or groups to produce coordinated movement. Muscles are also responsible for maintaining posture and generating heat.

Bones give a rigid frame for the body, cover internal organs, and serve as attachment points for muscles. They also store minerals similar as calcium and produce blood cells in the bone gist.

sensitive organs, similar as the eyes, cognizance, nose, and skin, descry and respond to stimulants in the terrain. They transmit information to the brain, which processes the information and generates an applicable response.

All three body corridor work together in the musculoskeletal system to produce movement, maintain posture, and respond to external stimulants. Muscles attach to bones and work together to produce coordinated movement. sensitive organs descry stimulants in the terrain and transmit information to the brain, which coordinates muscle movement and generates a response. Bones give the rigid frame and attachment points for muscles, as well as cover internal organs.

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?

As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.

for such more questions on conclusion

https://brainly.com/question/26093731

#SPJ11

Answer:

(-2,9)

Step-by-step explanation:

when moving it 5 units left on the x axis it would be 5-7

So in turn you would be given (-2,9)

Because the y stays the same you would still have (?,9)

Answer:

We can simplify the expression as follows:

5^(2000) + 5^(1999)

5^(1999) - 5^(1997)

= 5^(1999) * (1 + 1/5)

5^(1997) * (1 - 1/25)

= (5/4) * (25/24) * 5^(1999)

= (125/96) * 5^(1999)

Therefore, the value of the expression is (125/96) * 5^(1999).

Step-by-step explanation:

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the time saved.

An experiment is a controlled study in which a scientist manipulates a variable in order to determine its effects. An experiment must have a testable hypothesis, be replicable, and produce empirical evidence.

Discussing the time difference in an experiment. In an experiment, it takes one hour to memorize all of the words on a list, and two years later, they are relearned in 45 minutes.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is referred to as the time saved.

Time saved is the difference between the total time it takes to finish a process with a particular method and the total time it would take to complete the same process without that method.

Learn more about the Time difference here:

brainly.com/question/30132266

#SPJ11

Vertex: The vertex of the function is at the point (-2, 3).

The domain of a function is the set of all possible input values (often represented as x) for which the function is defined. In other words, it is the set of all values that can be plugged into a function to get a valid output. The domain can be limited by various factors such as the type of function, restrictions on the input values, or limitations of the real-world scenario being modeled.

The range of a function refers to the set of all possible output values (also known as the dependent variable) that the function can produce for each input value (also known as the independent variable) in its domain. In other words, the range is the set of all values that the function can "reach" or "map to" in its output.

In the given question,

Domain: The domain of the function is all real numbers greater than or equal to -2, since the square root of a negative number is not defined in the real number system.

Range: The range of the function is all real numbers less than or equal to 3, since the maximum value of the function occurs at x=-2, where f(x)=3.

Vertex: The vertex of the function is at the point (-2, 3).

Four additional points:When x=-1, f(x)=-(√(-1)+2)+3 = -1, so (-1,-1) is a point on the graph.

When x=0, f(x)=-(√0+2)+3 = 1, so (0,1) is a point on the graph.

When x=1, f(x)=-(√1+2)+3 = 2, so (1,2) is a point on the graph.

When x=4, f(x)=-(√4+2)+3 = -1, so (4,-1) is a point on the graph

To know more about Graphs, visit:

https://brainly.com/question/17267403

#SPJ1