Answer:
pH = -log[H+]
Where [H+] = Hydrogen ion concentration
In this case,
[H+] = 1 × 10^(-2) = 10^(-2)
log{10^(-2)} = -2
-log{10^(-2)} = -(-2) = 2
pH = -log{10^(-2)} = 2
and hi.!!!
Answer:
0.1
Explanation:
Hydrogen ion concentration can be calculated using the formula [H+] = 10^-pH
pH can be concentrated using ph = -log[H+]
let's calculate the initial pH before anything was added: pH = -log(1) = 0
it increased by 1 so the final pH is 1.
Now we'll find the [H+] of a solution with a pH of 1:
concentration = 10^(-1) = 0.1
CH3CH2OH
______ions
in an aqueous solution.
А
forms
B
does not form
Answer:
When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.
Explanation:
Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.
What are nonelectrolytes?Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.
Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.
Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.
Therefore, option B. ethanol does not form ions is the correct blank.
Learn more about nonelectrolytes here:
https://brainly.com/question/14633704
#SPJ2
Determine the total pressure of a mixture that contains 5.25 g of He and 3.25 g of N2 in a 7.75-L flask at a temperature of 27ºC.
Answer:
4.54 atm
Explanation:
Step 1: Calculate the total number of gaseous moles
We will calculate the moles of each gas using its molar mass.
He: 5.25 g × 1 mol/4.00 g = 1.31 mol
N₂: 3.25 g × 1 mol/28.01 g = 0.116 mol
The total number of moles is:
n = 1.31 mol + 0.116 mol = 1.43 mol
Step 2: Convert 27 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 27 + 273.15 = 300 K
Step 3: Calculate the total pressure of the mixture
We will use the ideal gas equation.
P × V = n × R × T
P = n × R × T / V
P = 1.43 mol × (0.0821 atm.L/mol.K) × 300 K / 7.75 L = 4.54 atm
(GIVING BRAINIEST!)
Which of the following compares the rainforest and the tundra environments correctly?
A. A rainforest is hotter than the tundra because it is closer to the equator.
B. A rainforest is less humid than the tundra because of its higher elevation.
C. A tundra has higher temperatures than the rainforest because it receives more
sunshine.
D. A tundra has higher humidity than the rainforest because of its proximity to water bodies.
For Science BTW!
Answer:
A
Explanation:
A rain forest is hotter than the tundra because it is closer to the equator
At what velocity (m/s) must a 20.0g object be moving in order to possess a kinetic energy of 1.00J
Answer:
10 ms-1
Explanation:
Kinetic energy = 1/2 × m × v^2
1 = 1/2× 20 ×10^ -3 × v^2
v ^ 2 = 100
v = 10 ms-1
note : convert grams in to kg before substitution as above
Given:
Kinetic energy,
K.E = 1.00 JMass,
m = 20.0 gWe know the formula,
→ [tex]K.E = \frac{1}{2} mv^2[/tex]
By putting the values, we get
[tex]1 = \frac{1}{2}\times 20\times 10^{-3}\times (v)^2[/tex]
[tex]v^2 = 100[/tex]
[tex]v = \sqrt{100}[/tex]
[tex]v = 10 \ m/s[/tex]
Thus the above response is correct.
Learn more about K.E here:
https://brainly.com/question/24997625
Can steel turn into gas? ( A random question that came to mind. I have no idea if it is or isn't possible.)
Answer:
YES STEEL CAN TURN INTO GAS .
Answer: yes it can!
Explanation:
1. Metallic strontium crystallizes in a face-centered cubic lattice, with one Sr atom per lattice point. If the edge length of the unit cell is found to be 608 pm, what is the metallic radius of Sr in pm?
2. The substance beta manganese is found to crystallize in a cubic lattice, with an edge length of 630.0 pm. If the density of solid beta manganese is 7.297 g/cm3, how many Mn atoms are there per unit cell?
Answer:
[tex]r=215pm[/tex]
[tex]N_{Mn}=20[/tex]
Explanation:
From the question we are told that:
Edge length of the unit cell [tex]l=608pm[/tex]
a)
Generally the equation for The relationship between edge length and radius is mathematically given by
[tex]4r=\sqrt{2a}[/tex]
Therefore
[tex]4r=\sqrt{2*608}[/tex]
[tex]r=\frac{\sqrt{2*608}}{4}[/tex]
[tex]r=215pm[/tex]
b)
From the question we are told that:
Density [tex]\rho=7.297[/tex]
Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]
Therefore Volume is given as
[tex]V=l^3[/tex]
[tex]V=630*10^-{10}^3[/tex]
[tex]V=2.50047*10^{−22}[/tex]
Generally the equation for Mass is mathematically given by
[tex]m=Volume*density[/tex]
[tex]m=V*\rho[/tex]
[tex]m=2.50047*10^{−22}*7.297[/tex]
[tex]m=1.83*10^{-21}g[/tex]
Therefore Molarity is given as
[tex]n=\frac{M}{Molar M}[/tex]
[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]
[tex]n=3.32*10^{-23}[/tex]
Finally The atoms in a unit cell is
[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]
[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]
[tex]N_{Mn}=20[/tex]
name two device that are using spinning
→ Takli
Takli is a small support style spindle. Takli is a perfect tool for spinning cotton, and this are used too to spin fibers, cotton, cashmere, and silk etc. Takli is known as handspindle. And it is the simplest device for spinning.→ Charkha
Charkha is a device for spinning thread or yarn from fibers etc. This are known as spinning wheel.HAVE A NICE DAY!Using the following equation for the combustion of octane calculate the heat associated with the formation of 100.0 g of carbon dioxide. The molar mass of octane is 114.33 g/mole.
2C8H18 + 25O2 → 16 CO2 + 18 H2O
ΔH°rxn = -11018 kJ
Answer:
The right solution is "-602.69 KJ heat".
Explanation:
According to the question,
The 100.0 g of carbon dioxide:
= [tex]\frac{100.0 \ g}{114.33\ g/mole}[/tex]
= [tex]0.8747 \ moles[/tex]
We know that 16 moles of [tex]CO_2[/tex] formation associates with -11018 kJ of heat, then
0.8747 moles [tex]CO_2[/tex] formation associates with,
= [tex]-\frac{0.8747}{16}\times 11018 \ KJ \ of \ heat[/tex]
= [tex]-0.0547\times 11018[/tex]
= [tex]-602.69 \ KJ \ heat[/tex]
The predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be
A. Inability to metabolize fructose.
B. a lowered yield of ATP production per mole of glucose metabolized.
C. a failure to split fructose bisphosphate into triose phosphates.
D. a failure to resynthesize glucose from lactic acid.
The predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.
WHAT IS FRUCTOSE 1,6-BISPHOSPHATASE:
fructose 1,6-bisphosphatase is an important enzyme produced in the liver to catalyze the conversion of fructose-1,6-bisphosphate to fructose-6-phosphate during gluconeogenesis. Gluconeogenesis is the process whereby glucose sugar is produced from noncarbohydrate substances such as lactate, pyruvate etc. Gluconeogenesis is the opposite of glycolysis (breakdown of glucose).CONSEQUENCES OF DEFICIENCY OF FRUCTOSE 1,6-BISPHOSPHATASE:
Since, gluconeogenesis results in the synthesis of glucose from substances like lactic acid, a deficiency in liver fructose 1,6-bisphosphatase enzyme will mean that GLUCOSE WILL NOT BE ABLE TO BE SYNTHESIZED.Therefore, the predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.
Learn more at: https://brainly.com/question/13717824
……….is strong due to the ……………..between positive ions and negative delocalized electrons
Answer:
atom &bond
Explanation:
atom is strong due to the bond
If you dissolve 0.1 mol of formic acid in 1 L of water, ther esulting solution contains 0.004 mol of H₃O+. Based on this information, is formic acid a strong acid, or is it a weak acid?
Please explain!
In an ideal case, the acid would completely protonate. such an acid would be a strong acid. Dissociation of Formic acid looks like:
HCOOH + H₂O → COOH⁻ + H₃O⁺
one mole of formic acid should give one mole of Hydronium(H₃O⁺) ions
similarly, 0.1 moles of formic acid should produce 0.1 moles of hydronium ions. but we know that it is not the case, a much lesser amount is actually formed.
Which means that Formic acid did not completely dissociate into COOH⁻ and H⁺ ions.
Hence, Formic Acid is a weak acid
We know
Any acid
Containing carbon is weak Containing no carbon is strongFormic acid stands for HCOOH
It contains C means dissociation is less .
The dissociation of H+ is less means acidity is less.
Weak acidWhich of the following best describes physical science?
0...
OA.
the study of motion
OB.
the study of matter and energy
O C.
the study of Earth's structure and processes
OD.
the study of reactions
O E.
the study of living things
Reset
Ne
B. The study of matter and energy.
Because physical science is everything that doesn't include organic things.
The study of matter and energy among the following best describes physical science.
What is matter?
Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it possess volume .Matter is composed up of atoms which may or not be of same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states of substances such as solids, liquids and gases depending on the conditions of the temperature and the pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter is always conserved by law of conservation of matter.The law was proposed by Antoine Lavoisier.
Learn more about matter,here:
https://brainly.com/question/9477180
#SPJ7
Which of the following events takes place in the Kreb entry phase (acetyl COA from pyruvate)?
A). Only CO2 output
B). NAD is reduced, CO2 is released
C). NADH is oxidized, CO2 is released
D). Only NADH is oxidized
E). Only NAD is reduceed
Answer:
Alphabet C :NADH is oxidized,CO2 is reduced
What is the concentration of Htions at a pH = 11?
mol/L
What is the concentration of Htions at a pH = 6?
mol/L
How many fewer Htions are there in a solution at a
pH = 11 than in a solution at a pH = 6?
A/An is a type of blood cell that's also called a red blood cell. a) Jeukocyte O b) thrombocyte c) plasma d) erythrocyte
Answer:
option a
Explanation:
pls mark me as brainliest
One of the electron transitions in a hydrogen atom produces infrared light with a wavelength of
8.231 x 10°m. What amount of energy causes this transition?
A transition occurs when an electron absorbs energy and moves from one energy level to another.
Let us recall the formula;
E = hc/λ
h= planks constant = 6.6 * 10^-34 Js
c = speed of light = 3 * 10^8 ms-1
λ = wavelength =
We can see from the question that the exponent in the value for the wavelength was not properly rendered hence we can not be able to substitute values and obtain a numerical answer for the energy of the infrared radiation.
However, if all the values are properly substituted, then the energy of the infrared radiation can conveniently be obtained.
https://brainly.com/question/4177755
Titration of 25.0 mL of an HCl solution of unknown concentration requires 14.8 mL of 0.100 M NaOH. What is the molar concentration of the HCl solution
s-Block compounds give a characteristic flame colour in the flame test. Based on this, can you give one use of s-block compounds?
Answer:
Lithium is used in making electrochemical cells.
Phosphorylation of enzymes:_______.
a. always increases their activity.
b. generally occurs on Ser, Thr, and/or Tyr side chains and to a lesser extent on the His side chain.
c. is irreversible.
d. is one of only five known covalent forms of regulation.
Answer:
generally occurs on Ser, Thr, and/or Tyr side chains and to a lesser extent on the His side chain
Based on the following observations decide the order of reactivity for hydrogen, magnesium, and copper. Hydrochloric acid reacts with magnesium but did not react with copper. magnesium reacted with copper sulfate. Write your answers in the blanks. For magnesium write magnesium for hydrochloric acid write hydrogen and for copper sulfate write copper.
Answer:
Mg> H> Cu
Explanation:
We can see from the question that hydrochloric acid reacted with magnesium as follows;
Mg(s) + 2HCl(aq) ----> MgCl2(aq) + H2(g)
Copper does not react with HCl which means that copper is less reactive than hydrogen hence it can not displace hydrogen from a dilute acid solution.
The order of reactivity of the elements then is ; Mg> H> Cu
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
Could someone please help me out???
Answer:
Time is 2.2 seconds.
Explanation:
Time:
[tex]{ \boxed{ \bf{time = \frac{distance}{speed} }}}[/tex]
Substitute into the formula:
speed = 715 km/h = 198.61 m/s
[tex]{ \tt{time = \frac{435}{198.61} }} \\ { \tt{time = 2.2 \: seconds}}[/tex]
When the equation,
O2 + __C 10H 22 →
CO2 +
H2O is balanced, the coefficient of O2 is?
Please help!
When equal moles of an acid and a base are mixed, after reaction the two are compounds are said to be at the _______________. Select one: Indicator point Stoichiometric point Equilibrium point End point
Answer:
when equal moles of an acid and base are mixed,after reaction the two are compounds are said to be at the Equivalent point.
Explain why
when suger
is heated it
does not boil but rather break down
into carbon and water?
Answer:
When simple sugars such as sucrose (or table sugar) are heated, they melt and break down into glucose and fructose, two other forms of sugar. Continuing to heat the sugar at high temperature causes these sugars to lose water and react with each other producing many different types of compounds.
In practice, the second law of thermodynamics means that:
a. Systems move from ordered behavior to more random behavior.
b. Systems move from random behavior to more ordered behavior.
c. Systems move between ordered and random behavior patterns based on temperature.
d. Systems are constantly striving to reach equilibrium.
Answer:
Systems move from ordered behavior to more random behavior.
Explanation:
Entropy refers to the degree of disorderliness in a system. The second law of thermodynamics can be restated in terms of entropy as follows; “any spontaneous process in any isolated system always results in an increase in the entropy of that system.''(science direct)
According to this law, systems tend towards a more disorderly behaviour (increase in entropy) hence the answer given above.
The element europium exists in nature as two isotopes: has a mass of u and has a mass of u. The average atomic mass of europium is u. Calculate the relative abundance of the two europium isotopes.
Answer:
Problem Details
The element europium exists in nature as two isotopes: 151Eu has a mass of 150.9196 amu, and 153Eu has a mass of 152.9209 amu. The average atomic mass of europium is 151.96 amu. Calculate the relative abundance of the two europium isotopes.
answer:
151Eu = 48%, 153Eu = 52%
A bio catalyst that increases the rate of the reaction without being changed
a) Aluminum oxide. b) Silicon dioxide. c) Enzyme. d) Hydrogen peroxide
43. What is the
than the reaction substrate.
42. A
Explanation:
Enzymes are proteins functioning as catalysts that speed up reactions by lowering the activation energy. A simple and succinct definition of an enzyme is that it is a biological catalyst that accelerates a chemical reaction without altering its equilibrium.
What does this graph show about the acceleration of the moving object?
the acceleration is constant
the object is not accelerating
the acceleration is decreasing
the acceleration is increasing
Answer:
the accleration is decreasing
Explanation:
I hpe so
Answer:
the acceleration is increasing
Explanation:
I took a test with a question that was phrased like this, so I'm assuming (hoping) that it's the same graph
The mass of an empty crucible was 17.556g. The mass of the crucible and a hydrate was 21.018 g. The mass of the crucible and anhydrous salt (after heating) was 19.641g. A. Calculate the mass of water lost due to heating. B. Calculate the mass percentage of water.
Answer:
A. 1.377 g
B. 16.5%
Explanation:
To find the water loss, subtract the salt and crucible mass from the hydrate and crucible mass
21.018 - 19.641 = 1.377
To find the water mass percentage, divide the empty crucible mass by the mass of the hydrate and crucible. Then, subtract that number from 1.
17.556 ÷ 21.018 = 0.835284
1 - 0.835284 = 0.164716
If you want to add an extra step, multiply this number by 100 to get the percentage.
0.164716 x 100 = 16.4716
