A small wave pulse and a large wave pulse approach each other on a string; the large pulse is moving to the right.
Sometime after the pulses have met and passed each other, which of the following statements is correct? (More than one answer may be correct)
- the large pulse continues moving to the right
- the large pulse continues unchanged, moving to the right
- the small pulse is reflected and moves off to the right with a smaller amplitude
- the small pulse is reflected and moves off to the right with its original amplitude
- the two pulses combine into a single pulse moving to the right

Answers

Answer 1

Answer:

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2

Explanation:

The waves fulfill the principle of superposition, which states that the value of the function at a point is the algebraic sum of the waves at a given instant.

The two waves in this exercise travel in the opposite direction, so when they are close, the resulting wave is the sum of the two waves, having a complicated shape. But when the waves follow their movement, they give in the same way as the initial a,

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2


Related Questions

Simple harmonic oscillations can be modeled by the projection of circular motion at constant angular velocity onto the diameter of a circle. When this is done, the analog along the diameter of the acceleration of the particle executing simple harmonic motion is

Answers

Answer:

the analog along the diameter of the acceleration of the particle executing simple harmonic motion is the projection along the diameter of the centripetal acceleration of the particle in the circle

g As observed on earth, a certain type of bacteria is known to double in number every 24 hours. Two cultures of these bacteria are prepared, each consisting initially of one bacterium. One culture is left on earth and the other placed on a rocket that travels at a speed of 0.893c relative to the earth. At a time when the earthbound culture has grown to 256 bacteria, how many bacteria are in the culture on the rocket, according to an earth-based observer

Answers

Answer:

86.4 hrs

Explanation:

The amount of bacteria is initially 1

It doubles every 24 hrs.

After first 24 hrs, the amount = 2

After next 24 hrs = 4

After next 24 hrs = 8

After next 24 hrs = 16

After next 24 hrs = 32

After next 24 hrs = 64

After next 24 hrs = 128

After next 24 hrs = 256

Total time taken to reach 256 = 24 x 8 = 192 hrs

For the bacteria culture on the rocket that travels at a speed of 0.893c relative to the earth, this time is contracted by the relationship

t = t'(1 - ¥^2)^0.5

Where t is the contracted time =?

t' is the time on earth

¥ = v/c

Where v is the speed of the rocket

c is the speed of light

since v = 0.893c

¥ = 0.893

Substituting, we have

t = 192 x (1 - 0.893^2)^0.5

t = 192 x 0.2025^0.5

t = 192 x 0.45 = 86.4 hrs

an ideal gas is confined to a container with adjustable volume. the number of moles, n, and temperature, t, are constant. by what factor will the volume change if pressure increase by a factor of 5.1

Answers

Answer:

The volume will decrease by a factor of 10/51.

Explanation:

Hello,

In this case, since both moles and temperature remain constant, we can use the Boyle's law that relates the volume and pressure as an inversely proportional relationship:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since the pressure increases by a factor of 5.1 (statement), we have:

[tex]P_2=5.1P_1[/tex]

Thus, the final volume is:

[tex]V_2=\frac{P_1V_1}{P_2} =\frac{P_1V_1}{5.1P_1}\\\\V_2=\frac{10}{51}V_1[/tex]

It means that the volume will decrease by a factor of 10/51.

Regards.

A ferry boat sails east across a lake at 10 km/h. A woman is walking east on
the boat at 1.5 km/h. What is her speed relative to the boat?
A. 8.5 km/h west
B. 8.5 km/h east
C. 1.5 km/h east
O D. 1.5 km/h west

Answers

Answer:

B

8.5 km/h east

Explanation:

Relative velocity= Va -Vb

=10-1.5

=8.5 km/h east

The concept relative speed is used when two or more bodies moving with some speed are considered. The relative speed of woman to the boat is 8.5 km/h east. The correct option is B.

What is relative speed?

The relative speed of two bodies is defined as the sum of their speeds if they are moving in the opposite direction and it is the difference of their speeds if they are moving in the same direction.

The speed of the moving body with respect to the stationary body is known as the relative speed. The term relative means in comparison to. The relative speed is a scalar quantity.

Here both the boat and women are travelling in the same direction. So the relative speed is given as:

Relative speed = 10 - 1.5 = 8.5 km / h

Therefore the relative speed is 8.5 km/h east.

Thus the correct option is B.

To know more about relative speed, visit;

https://brainly.com/question/11476119

#SPJ7

What is the radiation pressure 1.5 m away from a 700 W lightbulb? Assume that the surface on which the pressure is exerted faces the bulb and is perfectly absorbing and that the bulb radiates uniformly in all directions.

Answers

Answer:

3.30 x 10^-7 Pascal

Explanation:

distance r = 1.5 m

power P = 700 W

the radiation pressure is given as

Pr = P/A*c

where

area of the surface A = 4πr^2

calculate for A

speed of light is c = 3×10^8  m/s

plugging above values in equation above gives

Pr = 3.30 x 10^-7 Pascal

A metal sample of mass M requires a power input P to just remain molten. When the heater is turned off, the metal solidifies in a time T. The heat of fusion of this metal is

Answers

Answer:

L = Pt/M

Explanation:

Power, P= Q/t = mL/t

we know that, (Q=m×l)

Now ⇒l= Pt/M

Thus l= Pt/M

Show that the entire Paschen series is in the infrared part of the spectrum. To do this, you only need to calculate the shortest wavelength in the series.

Answers

Answer and Explanation:

The computation of the shortest wavelength in the series is shown below:-

[tex]\frac{1}{\lambda} = R(\frac{1}{n_f^2} - \frac{1}{n_i^2} )[/tex]

Where

[tex]\lambda[/tex] represents wavelength

R represents Rydberg's constant

[tex]n_f[/tex] represents Final energy states

and [tex]n_i[/tex] represents initial energy states

Now Substitute is

[tex]1.097\times 10^7\ m^{-1}\ for\ R, \infty for\ n_i,\ 3 for\ n_i,\\\\\ \frac{1}{\lambda} = R(\frac{1}{n_f^2} - \frac{1}{n_i^2} )[/tex]

now we will put the values into the above formula

[tex]= 1.097\times 10^7 m^{-1}(\frac{1}{3^2} - \frac{1}{\infty^2} )\\\\ = 1.097\times10^7\ m^{-1} (\frac{1}{9} )[/tex]

[tex]= 1218888.889 m^{-1}[/tex]

Now we will rewrite the answer in the term of [tex]\lambda[/tex]

[tex]\lambda = \frac{1}{1218888.889} m\\\\ = 0.82\times 10^{-6} m[/tex]

So, the whole Paschen series is in the part of the spectrum.

A long bar slides on two contact points and is in motion with velocity ν. A steady, uniform, magnetic field B is present. The induced current through resistor R is:

Answers

Answer:

The induced current in the resistor is I = BLv/R

Explanation:

The induced emf ε in the long bar of length, L in a magnetic field of strength, B moving with a velocity, v is given by

ε = BLv.

Now, the current I in the resistor is given by

I = ε/R where ε = induced emf in circuit and R = resistance of resistor.

So, the current I = ε/R.

substituting the value of ε the induced emf, we have

I = ε/R

I = BLv/R

So, the induced current through the resistor is given by I = BLv/R

Consider a bus traveling to the west (negative x direction) that begins to slow down as it approaches a traffic light. Which statement concerning its acceleration in the x direction is correct

Answers

Complete question is;

Consider a bus traveling to the west (-x direction) begins to slow down as it approaches a traffic light. Which statement concerning its acceleration in the x direction is correct

a) The bus is decelerating and its acceleration is positive.

b) The bus is decelerating, and its acceleration is negative.

c) The acceleration is zero.

d) A statement cannot be made using the information given.

Answer:

Option A - bus is decelerating and acceleration is positive.

Explanation:

We are told that the bus is travelling in (negative x direction) and begins to slow down. Since the bus is slowing down, it means that the bus is undergoing a negative acceleration which is called deceleration.

Thus, the bus is decelerating.

Since it is moving in the negative x-axis, it means acceleration is now; -(-a) which gives +a.

Thus, bus is decelerating and acceleration is positive.

From a hot air balloon 2 km​ high, a person looks east and sees one town with angle of depression of 16 degrees. He then looks west to see another town with angle of depression of 84 degrees. What is the distance between the two towns?

Answers

Answer:

7km

Explanation:

The angle of depression is congruent to the angle of elevation and can be explained as angle below horizontal in which the person observing an object must view for him/her to view object's that are lower than him/her.

In angle of depression, there is assumption that object is closer to the person observing it, so there is parallel horizontal for both observing and object been observed.

hot air balloon 2 km​ high,

there exist two triangles

From trigonometry

Tanx= opposite/adjacent

Opp= 2km

Adj= X1

first triangle have base length of

Tan(16)=2/X1

X1=2/ tan(16)

X1=6.97

For Second triangle

Tanx= opposite/adjacent

Opp= 2km

Adj= X2

the other with a base length of

X2=2/tan(84)

X2=0.21

Therefore,, the total distance between the two towns is

x1+x2=6.97+0.21=7.18km

A 1000 kg car experiences a net force of 9500 N while slowing down from 30 m/s to 16 m/s. How far does it travel while slowing down?

Answers

Answer:

33.89 m

Explanation:

We must first obtain the acceleration of the car from;

F=ma

Where

F= force= 9500 N

m= mass of the car= 1000kg

a= acceleration

a= F/m= 9500/1000

a= 9.5 m/s^2

From;

V^2=u^2 + 2as

Where;

V= final velocity

u= initial velocity

s= distance covered

a= acceleration

s= v^2 -u^2/2a

s= (30)^2 -(16)^2/2×9.5

s= 900 - 256/19

s= 644/19

s= 33.89 m

The distance is 33.89 m

The first step is to calculate the acceleration

F= ma

force= 9500N

mass= 1000 kg

9500= 1000 × a

a= 9500/1000

= 9.5 m/s

v²= u² + 2as

30²= 16² + 2(9.5)(s)

900= 256 + 19s

900-256= 19s

644= 19s

s= 644/19

s= 33.89 m

Hence the distance traveled by the car is 33.89 m

Please see the link below for more information

https://brainly.com/question/18313681?referrer=searchResults

6. If you wanted to develop a telescope, what kind of lenses would you use for the objective lens (the lens that collects the light) and the eyepiece? Explain your reasoning. Draw a picture with ray tracing of your setup.

Answers

Answer:

objetive: a converging lens for large diameter lenses

eyepiece you must select a lens with a small focal length and the diameter is not important

The selected lenses should decrease chromatic aberration.

Explanation:

A telescope is an instrument that collects light from very distant objects, therefore very weak.

Therefore you should select a converging lens for large diameter lenses, to collect magnanimous light and with a large focal length.

For the eyepiece you must select a lens with a small focal length and the diameter is not important

the telescope magnification is

                 m = f_objective / F_ocular

The selected lenses should decrease chromatic aberration.

In general, these lenses are heavy, so refractory telescopes were imposed, so it uses a concave mirror instead of an objective lens.

Answer: this the real answer try it objetive: a converging lens for large diameter lenseseyepiece you must select a lens with a small focal length and the diameter is not importantThe selected lenses should decrease chromatic aberration.Explanation:A telescope is an instrument that collects light from very distant objects, therefore very weak.Therefore you should select a converging lens for large diameter lenses, to collect magnanimous light and with a large focal length.For the eyepiece you must select a lens with a small focal length and the diameter is not importantthe telescope magnification is                 m = f_objective / F_ocularThe selected lenses should decrease chromatic aberration.In general, these lenses are heavy, so refractory telescopes were imposed, so it uses a concave mirror instead of an objective lens.

Explanation:

________ is a thermodynamic function that increases with the number of energetically equivalent ways to arrange components of a system to achieve a particular state.

Answers

Answer:

entropy

Explanation:

PLEASE HELP Which of the following describes the efficiency of real machines? 1.Efficiency is 100% 2.IMA is always larger than the AMA 3.IMA is always smaller than the AMA 4.IMA is equal to the AMA

Answers

Answer:

IMA is always larger than the AMA

Explanation:

IMA is Ideal Mechanical Advantage and it equals the length of effort that is divided by the length of resistance which is given by the formula

IMA= Fr/Fe

Where Fr is the resistance force

Fe is the effort force.

IM= de/dr

Where de is the distance of the applied effort  

dr is the distance traveled by the load.

In any real machine, the effort is needed to overcome friction and because of this, the ideal mechanical advantage(IMA) is always larger than the actual mechanical advantage (AMA)

Electromagnetic radiation is more common than you think. Radio and TV stations emit radio waves when they broadcast their programs; microwaves cook your food in a microwave oven; dentists use X rays to check your teeth. Even though they have different names and different applications, these types of radiation are really all the same thing: electromagnetic (EM) waves, that is, energy that travels in the form of oscillating electric and magnetic fields. Which of the following statements correctly describe the various applications listed above?
a) All these technologies use radio waves, including low-frequency microwaves.
b) All these technologies use radio waves, including high-frequency microwaves.
c) All these technologies use a combination of infrared waves and high-frequency microwaves.
d) Microwave ovens emit in the same frequency band as some wireless Internet devices.
e) The radiation emitted by wireless Internet devices has the shortest wavelength of all the technologies listed above.
f) All these technologies emit waves with a wavelength in the range 0.10 to 10.0 m.
g) All the technologies emit waves with a wavelength in the range 0.01 to 10.0 km.

Answers

Answer:

d) Microwave ovens emit in the same frequency band as some wireless Internet devices.

Explanation:

Microwave are radio waves of short wavelength, from about 10 centimetres to one millimetre, in the Super High Frequency and the Extremely High Frequency bands. Microwaves can penetrate into materials and deposit their energy below the surface which is why is is used in microwave heating found in microwave oven. Transmission of data sometimes involves the use of microwaves to send and receive information over a long distance. Microwaves are the mainly used in radar, used for satellite communication, and wireless networking technologies such as Wi-Fi.

16. If one body is positively charged and another body is negatively charged, free electrons tend to
O A. move from the negatively charged body to the positively charged body
O B. remain in the positively charged body
OC. move from the positively charged body to the negatively charged body
O D. remain in the negatively charged body

Answers

Answer:

Hey there!

The correct answer would be option A. If one body is positively charged and another body is negatively charged, free electrons tend to move from the negatively charged body to the positively charged body

Let me know if this helps :)

What is the magnitude of the free-fall acceleration at a point that is a distance 2R above the surface of the Earth, where R is the radius of the Earth

Answers

Answer:

g' = g/9 = 1.09 m/s²

Explanation:

The magnitude of free fall acceleration at the surface of earth is given by the following formula:

g = GM/R²   ----- equation 1

where,

g = free fall acceleration

G = Universal Gravitational Constant

M = Mass of Earth

R = Distance between the center of earth and the object

So, in our case,

R = R + 2 R = 3 R

Therefore,

g' = GM/(3R)²

g' = (1/9) GM/R²

using equation 1:

g' = g/9

g' = (9.8 m/s)/9

g' = 1.09 m/s²

Answer:

The magnitude of the free-fall acceleration [tex]g_h = 1.09m/s^2[/tex]

Explanation:

Surface of earth,

[tex]g = \frac{GM}{R^2}\\\\g = 9.8m/s^2[/tex]

free fall acceleration at height h,

[tex]g_h = \frac{GM}{(R+h)^2}[/tex]

where

G = gravitational constant

R = Radius of earth

M = mass of earth

therefore,

[tex]\frac{g_h}{g} = \frac{\frac{GM}{(R+h)^2}}{\frac{GM}{R^2}}\\\\ \frac{g_h}{g} = \frac{R^2}{(R+h)^2}\\\\g_h = g\frac{R^2}{(R+h)^2}[/tex]

Where height h = 2R

[tex]g_h = 9.8\frac{R^2}{(R+2R)^2}\\\\g_h = 9.8\frac{R^2}{(3R)^2}\\\\g_h = 9.8\frac{R^2}{(9R^2}\\\\g_h = 1.09m/s^2[/tex]

For more information, visit

https://brainly.com/question/17162343

A city of Punjab has a 15 percent chance of wet weather on any given day. What is the probability that it will take a week for it three wet weather on 3 separate days?

Answers

Answer: 0.0617

Explanation:

Given: The probability of wet weather on any given day in a city of Punjab : p=15%=0.15

Let X be a binomial variable that represents the number of days having wet weather.

Binomial probability formula : [tex]P(X=x)=^nC_xp^x(1-p)^x[/tex], where n= total outcomes, p = probability of success in each outcomes.

Here, n= 7 ( 1 week = 7 days)

The probability that it will take a week for it three wet weather on 3 separate days:

[tex]P(X=3)^=\ ^7C_3(0.15)^3(1-0.15)^{7-3}\\\\=\dfrac{7!}{3!(7-3)!}(0.15)^3(0.85)^4\\\\=\dfrac{7\times6\times5}{3\times2}\times 0.003375\times0.52200625\approx0.0617[/tex]

Hence, the required probability =0.0617

On the way to school, the bus speeds up from 20 m/s to 36 m/s in 4 seconds. What distance does the bus cover in this time frame

Answers

Answer:

Explanation:

initial velocity u = 20 m /s

final velocity v = 36 m /s

time taken t = 4 s .

acceleration = (v - u) / t

= (36 - 20) / 4

a = 4 m / s ²

from the formula

v² - u² = 2 a s  , s is distance covered .

putting the values

36² - 20² = 2 x 4 x s

1296 - 400 = 8 x s

s = 112 m .

Answer:112

Explanation:

A spherical balloon has a radius of 6.95m and is filled with helium. The density of helium is 0.179 kg/m3, and the density of air is 1.29 kg/m3. The skin and structure of the balloon has a mass of 960kg . Neglect the buoyant force on the cargo volume itself. Determine the largest mass of cargo the balloon can lift.

Answers

Answer:

602.27 kg

Explanation:

The computation of the largest mass of cargo the balloon can lift is shown below:-

Volume of helium inside the ballon= (4 ÷ 3) × π × r^3

= (4 ÷ 3) × 3.14 × 6.953

= 1406.19 m3

Mass the balloon can carry = volume × (density of air-density of helium)

= 1406.19 × (1.29-0.179)

= 1562.27 kg

Mass of cargo it can carry = Mass it can carry - Mass of structure

= 1562.27 - 960

= 602.27 kg

Design a voltage divider to provide the following approximate voltages with respect to ground using a 30 V source: 8.18 V, 14.7 V, and 24.6 V. The current drain on the source must be limited to no more than 1 mA. The number of resistors, their values, and their wattage ratings must be specified. A schematic showing the circuit arrangement and resistor placement must be provided

Answers

Answer:

R₁ = 14.7 10³ Ω , R₂ = 8.18 10³ Ω ,  R₃ = 1.72 10³ Ω ,  R₄ = 5.4 10³ Ω    1/8 W resistor

Explanation:

For this exercise we must use a series circuit since the sum of the voltage on each resin is equal to the source voltage (V = 30 V)

Therefore we build a circuit with 4 resistors in series, in such a way that

   V = i R

let the voltage

1st resistance

         V = i R

         R₁ = V / i

         R₁ = 14.7 / 1 10⁻³

         R₁ = 14.7 10³ Ω

power is

        P = V i

        P = 14.7 1 10⁻³

        P = 14.7 10⁻³ W = 0.0147 W

a resistance of ⅛ W is indicated

2nd resistance

          R₂ = 8.18 / 1 10⁻³

          R₂ = 8.18 10³ Ω

Power

          P = 8.18 1 10⁻³

          P = 0.00818W

a 1/8 W resistor

3rd resistance

this resistance is calculated in such a way that

          V₁ + V₂ + V₃ = 24.6

          V₃ = 24.6 - V₁ -V₂

          V₃ = 24.6 - 14.7 - 8.18

          V₃ = 1.72 V

          R₃ = 1.72 / 1 10⁻³

          R₃ = 1.72 10³ Ω

           

power

          P = Vi

          P = 1.72 10⁻³

          P = 0.00172 W

a resistance of ⅛ W

To obtain the voltage of 24.6 we use this three resistors together

4th resistance

The value of this resistance is calculated so that the sum of all the voltages reaches the source voltage

           30 = V₁ + V₂ + V₃ + V₄

           V₄ = 30 - V₁ -V₂ -V₃

           V₄ = 30 -14.7 - 8.18 - 1.72

           V₄ = 5.4 V

          R₄ = 5.4 / 1 10⁻³

          R₄ = 5.4 10³ Ω

Power

         P = V i

         P = 5.4 10⁻³

         P = 0.0054 W

⅛ W resistance

The values ​​of these resistance are commercially

Let's check the consumption of the circuit

  R_total = R₁ + R₂ + R₃ + R₄

  R_total = (14.7 + 8.18 + 1.72 + 5.4) 10³

   R_total = 30 10³

the current circulating in the circuit is

     i = V / R_total

     i = 30/30 10³

     i = 1 10⁻³ A

therefore it is within the order requirement.

for connections see attached diagram

A concrete slab shown in Figure 5 is being lifted by using three cables connected to the slab at points A, B and C. The slab is in the xy plane. The vertical force required to lift this slab is 60 kN (F 60 kN). Find the tensions in cables DA, DB and DC (show all your workings that you do to find these)

Answers

Answer:

Fad = 28.8 kN

Fbd = 16.4 kN

Fcd = 28.1 kN

Explanation:

First, find the length of each cable.

AD = √((2 m)² + (0.5 m)² + (2.5 m)²)

AD = √10.5 m

AD ≈ 3.24 m

BD = √((1.5 m)² + (1 m)² + (2.5 m)²)

BD = √9.5 m

BD ≈ 3.08 m

CD = √((1 m)² + (1 m)² + (2.5 m)²)

CD = √8.25 m

CD ≈ 2.87 m

Next, use similar triangles to find the x, y, and z components of each tension force.

Fadx = 2/3.24 Fad = 0.617 Fad

Fady = 0.5/3.24 Fad = 0.154 Fad

Fadz = 2.5/3.24 Fad = 0.772 Fad

Fbdx = 1.5/3.08 Fbd = 0.487 Fbd

Fbdy = 1/3.08 Fbd = 0.324 Fbd

Fbdz = 2.5 / 3.08 Fbd = 0.811 Fbd

Fcdx = 1/2.87 Fcd = 0.348 Fcd

Fcdy = 1/2.87 Fcd = 0.348 Fcd

Fcdz = 2.5/2.87 Fcd = 0.870 Fcd

Now sum the forces in the x, y, and z directions:

∑Fx = ma

-0.617 Fad + 0.487 Fbd + 0.348 Fcd = 0

∑Fy = ma

-0.154 Fad − 0.324 Fbd + 0.348 Fcd = 0

∑Fz = ma

60 kN − 0.772 Fad − 0.811 Fbd − 0.870 Fcd = 0

To solve this system of equations algebraically, start by subtracting the first two equations, eliminating Fcd.

-0.463 Fad + 0.811 Fbd = 0

0.811 Fbd = 0.463 Fad

Fbd = 0.571 Fad

Substitute into either of the first two equations:

-0.617 Fad + 0.487 (0.571 Fad) + 0.348 Fcd = 0

-0.617 Fad + 0.278 Fad + 0.348 Fcd = 0

-0.339 Fad + 0.348 Fcd = 0

0.348 Fcd = 0.339 Fad

Fcd = 0.975 Fad

Now substituting into the third equation:

60 kN − 0.772 Fad − 0.811 Fbd − 0.870 Fcd = 0

60 kN − 0.772 Fad − 0.811 (0.571 Fad) − 0.870 (0.975 Fad) = 0

60 kN − 0.772 Fad − 0.463 Fad − 0.849 Fad = 0

60 kN − 2.083 Fad = 0

Fad = 28.8 kN

Solving for the other two tension forces:

Fbd = 0.571 Fad = 16.4 kN

Fcd = 0.975 Fad = 28.1 kN

Answer:

Tensions of:

DA = 28.81 KN

DB = 16.45 KN

DC = 28.07 KN

Explanation:

see attached

You measure the power delivered by a battery to be 4.26 W when it is connected in series with two equal resistors. How much power will the same battery deliver if the resistors are now connected in parallel across it

Answers

Answer:

The power delivered by the battery is 17.04 W

Explanation:

Power through a circuit is given as

P = IV    ....1

where P is the power

I is the current through the circuit

V is the voltage through the circuit

The voltage in a circuit is given as

V = IR    ....2

Let us take the value of each resistor as equal to R

when connected in series, the total resistance will be

[tex]R_{t}[/tex] = R + R = 2R

If we assume constant voltage through the circuit, then from equation 2, the current in this case is

I = V/2R

If the resistors are connected in parallel, then the total resistance will be

[tex]\frac{1}{R_{t} }[/tex] = [tex]\frac{1}{R}[/tex] +

[tex]R_{t}[/tex] = R/2

The current in this case will be increased since the resistance is reduced

I = 2V/R

comparing the two situations, we can see that the current increased when connected in parallel to a ratio of

[tex]\frac{2V}{R}[/tex] ÷  [tex]\frac{V}{2R}[/tex] =  

This means that the current increased 4 times

From equation 1, we can see that electrical power is proportional to the current at a constant voltage, therefore, the power will also increase by four times to

P = 4 x 4.26 = 17.04 W

A vertical spring stretches 3.8 cm when a 13-g object is hung from it. The object is replaced with a block of mass 20 g that oscillates in simple harmonic motion. Calculate the period of motion.

Answers

Answer:

The period of motion is 0.5 second.

Explanation:

Given;

extension of the spring, x = 3.8 cm = 0.038 m

mass of the object, m = 13 g = 0.013 kg

Determine the force constant of the spring, k;

F = kx

k = F / x

k = mg / x

k = (0.013 x 9.8) / 0.038

k = 3.353 N/m

When the object is replaced with a block of mass 20 g, the period of motion is calculated as;

[tex]T = 2\pi\sqrt{\frac{m}{k} } \\\\T = 2\pi\sqrt{\frac{0.02}{3.353} } \\\\T = 0.5 \ second[/tex]

Therefore, the period of motion is 0.5 second.

A simple arrangement by means of which e.m.f,s. are compared is known

Answers

Answer:

A simple arrangement by means of which e.m.f,s. are compared is known as?

(a)Voltmeter

(b)Potentiometer

(c)Ammeter

(d)None of the above

Explanation:

2. The glass core of an optical fiber has an index of refraction 1.60. The index of refraction of the cladding is 1.48. What is the maximum angle a light ray can make with the wall of the core if it is to remain inside the fiber?

Answers

Answer:

We know that the maximum angle that a light ray can wake with the wall of the core is equipment to the minimum angle with the normal of the core that will give rise in total internal reflection. so using Snell's law the angle is subtracted from 90° to get the maximum angle a light ray can make with the wall of the core if it is to remain inside the fiber.

So using

n1sinစ1. = n2sinစ2

1.6sin(x1) = 1.48sin(90),

But sin(90)=1

1.6sin(စ1) = 1.48,

sin(စ1) = 1.48/1.6

စ = 68°

Explanation:

Answer:

i = 67.66⁰

Explanation:

Using the Snell's law formula to solve this question which states that the ratio of the sine of angle of incidence to the sine of angle of refraction is a constant for a given pair of media. This constant is known as the refractive index for the given pair of media. Mathematically,

n = sin(i)/sin(r) where;

i is the angle of incidence

r is the angle of refraction.

n is the refractive index.

Given the refractive index of the optical fibre n₁ = 1.60 and that of cladding n₂ = 1.48

n₂/n₁ = sin(i)/sin(r)

The light ray can make with the wall of the core when its angle of refraction is 90⁰. The angle of incidence at this maximum point is known as the critical angle.

On substitution:

1.48/1.60 = sin(i)/sin90

1.48/1.60  = sin(i)/1

sin(i) = 1.48/1.60

sin(i) = 0.925

i = sin⁻¹0.925

i = 67.66⁰

Hence the maximum angle a light ray can make with the wall of the core if it is to remain inside the fiber is 67.66⁰.

PLEASE HELP ANSWER FAST As the vibration of molecules decreases, the _____ of the substance decreases. 1.temperature 2.internal energy 3.kinetic energy 4.all of the above

Answers

I think 1 and 3 is absolutely right but im not sure about number 2.
I think the answer is 4 all of the above because as the vibration decrease automatically the kinetic energy decrease and the temperature is decrease because when the vibration of molecules decrease thats mean the substances is slightly become a solid and you can get a solid cube of liquid if you freeze them

Determine the next possible thickness of the film (in nm) that will provide the proper destructive interference. The index of refraction of the glass is 1.58 and the index of refraction of the film material is 1.48.

Answers

Answer:

I know the answer

Explanation:

We want to choose the film thickness such that destructive interference occurs between the light reflected from the air-film interface (call it wave 1) and from the film-lens interface (call it wave 2). For destructive interference to occur, the phase difference between the two waves must be an odd multiple of half-wavelengths.

You can think of the phases of the two waves as second hands on a clock; as the light travels, the hands tick-tock around the clock. Consider the clocks on the two waves in question. As both waves travel to the air-film interface, their clocks both tick-tock the same time-no phase difference. When wave 1 is reflected from the air-film boundary, its clock is set forward 30 seconds; i.e., if the hand was pointing toward 12, it's now pointing toward 6. It's set forward because the index of refraction of air is smaller than that of the film.

Now wave 1 pauses while wave two goes into and out of the film. The clock on wave 2 continues to tick as it travels in the film-tick, tock, tick, tock.... Clock 2 is set forward 30 seconds when it hits the film-lens interface because the index of refraction of the film is smaller than that of the lens. Then as it travels back through the film, its clock still continues ticking. When wave 2 gets back to the air-film interface, the two waves continue side by side, both their clocks ticking; there is no change in phase as they continue on their merry way.

So, to recap, since both clocks were shifted forward at the two different interfaces, there was no net phase shift due to reflection. There was also no phase shift as the waves travelled into and out from the air-film interface. The only phase shift occured as clock 2 ticked inside the film.

Call the thickness of the film t. Then the total distance travelled by wave 2 inside the film is 2t, if we assume the light entered pretty much normal to the interface. This total distance should equal to half the wavelength of the light in the film (for the minimum condition; it could also be 3/2, 5/2, etc., but that wouldn't be the minimum thickness) since the hand of the clock makes one revolution for each distance of one wavelength the wave travels (right?).

"When red light in vacuum is incident at the Brewster angle on a certain glass slab, the angle of refraction is"

Answers

Complete Question

When red light in vacuum is incident at the Brewster angle on a certain glass slab,  the angle of refraction is [tex]36.0 ^o[/tex] . What are

(a) the index of refraction of the glass and

(b) the Brewster angle?

Answer:

a

   [tex]n_r = 1.376[/tex]

b

  [tex]i = 54^o[/tex]

Explanation:

From the question we are told that

     The angle of refraction is  [tex]r = 36.0 ^o[/tex]

   

Generally according Brewster law

              [tex]i + r = 90[/tex]

Here [tex]i[/tex] is the angle of incidence which is also the Brewster angle

So

              [tex]i + 36.0 = 90[/tex]

              [tex]i = 54^o[/tex]

Now the refractive index is mathematically represented as

           [tex]n_r = tan (i)[/tex]

substituting values

           [tex]n_r = tan (54)[/tex]

           [tex]n_r = 1.376[/tex]

you check the weather and find that the winds are coming from the west at 15 milers per hour. this information describes the winds

Answers

Answer:

Velocity

Explanation:

We finds that the winds are coming from the west at 15 miles per hour. This information shows the velocity of the wind. Since, velocity is a vector quantity. It has both magnitude and direction. 15 miles per hour shows the speed of wind and west shows the direction of wind motion.

Hence, the given information describes wind velocity.

Other Questions
What rapper paved the way for other rappers to be signed to major labels? Consider the reaction of 2.5 grams of Li (s) reacting with 0.5 grams of N2 (g) to produce Li3N (s). A) How many total grams of Li3 N (s) would be produced? B) Which of the starting elements is the limiting reagent, and how many grams of the non-limiting reagent remain after the reaction has completed? Em um posto de combustvel, o litro da gasolina estava custando R$2,40.Um cliente gastou R$72,00 para encher o tanque de seu carro. O valor do litro da gasolina sofreu 2 aumentos sucessivos,ambos de 10%. Quando o mesmo cliente gastara para encher o tanque do seu carro, aps esees aumentos Gina and Thuy are both research scientists. Gina is interested in the "nature" perspective of human development, and Thuy is interested in the "nurture perspective. Which of the following methods would be more helpful to Gina than to Thuy? a. structured observation b. fMRI c. naturalistic observation d. case study What is the product?8.25 x150.82O 1.650 8.2516.5 The treasurer of Riley Coal Co. is asked to compute the cost of fixed income securities for her corporation. Even before making the calculations, she assumes the aftertax cost of debt is at least 3 percent less than that for preferred stock. Debt can be issued at a yield of 11.0 percent, and the corporate tax rate is 20 percent. Preferred stock will be priced at $60 and pay a dividend of $6.40. The flotation cost on the preferred stock is $6. a. Compute the aftertax cost of debt. (Do not round intermediate calculations. Input your answer as a percent rounded to 2 decimal places.) b. Compute the aftertax cost of preferred stock. (Do not round intermediate calculations. Input your answer as a percent rounded to 2 decimal places.) c. Based on the facts given above, is the treasurer correct? At a furniture shop, every chair came with either 1 or 2 cushions. The ratio ofthe number of chairs to the number of cushions was 7:11, what fraction ofthe chairs came with 2 cushions? To which set or sets below does the number -1/2 belong Why did Congress agree to the Missouri Compromise?O A. To decide what states would join the UnionO B. All of theseO c. To address the conflict over slaveryO D. To get settlers to move into the territory A donor gave $75,000 to a nongovernmental, not-for-profit charity with instructions that the funds be transferred to Sam Smith, an individual who lost his home in a fire. The not-for-profit would: Five wheels are connected as shown in the figure. Find the velocity of the block Q, if it is known that: RA= 5 [m], RB= 10 [m], RD= 6 [m], RE=12 [m]. find the derivative by using product rule and distributionpls help quickly and show work Two students are comparing scientific experiments to investigations. They came up with the following ideas. Student A: Testing plant growth in different types of soils Student B: Comparing the water level in a lake during different times of the year Which student gave an example of a scientific experiment? Student A because it requires experimental and control groups Student B because it requires a hypothesis Student A because it is preferably done in natural settings Student B because it is preferably done across a long period of time Gothic Cathedrals were mostly builtnear the manors of dukes and lordsin the countryside to minister to the illiterate populationat the heart of medieval townson university campuses Find all positive integers less than 100 whose 762nd power ends in the digits "41" Which of the c-values satisfy the following inequality? 2>c/3 Take an electric field sensor and move it in a straight line, crossing the equipotential lines. Describe the relationship between the distance between the equipotential lines and the strength of the electric field. A parallelogram has a base of 9 centimeters and a height of 21 centimeters. What is the area of the parallelogram? Please include all work!! IIInitial KnowledgeThis morning, Leila's car had 19.79 gallons of fuel. Now, 2.8 gallons are left. How much fuel did Leila use? The subscripts in a chemical formula are the number ofof a particular atom in one mole of the molecule.A. reactantsB. atomsC. molesD. molecules