A satellite with mass m orbits a planet in time t. Since a satellite's mass has no bearing on how long it takes to orbit a planet, if the satellite had two times as much mass, the time it would take to do so would be t.
What do satellites do?An object in space known as a satellite orbit or revolves around a larger object. Satellites can be either natural (like the moon circling the Earth) or manmade (such as the International Space Station orbiting the Earth).
What exactly is a man-made satellite?A deliberately built body (with special purposes) that has been launched into orbit using rockets or other propulsion systems is known as an artificial satellite.
To learn more about satellites visit:
brainly.com/question/9266911
#SPJ4
a uniform thin rod of length 0.50 m and mass 4.0 kg can rotate in a horizontal plane about its center. a 3.0 gram bullet hits the end of the rod (initially at rest) at an angle of 60 degrees and imbeds in the rod. if the angular speed of the rod is 10. rad/s after the bullet strikes, what is the speed of the bullet before it strikes the rod?
The speed of the bullet before it strikes the rod is 67 m/s. To determine the speed of the bullet before it strikes the rod, we need to consider the conservation of angular momentum.
The moment of inertia of a thin rod about its center is given by the following formula:
I = (1/3) * m * L^2where I is the moment of inertia, m is the mass of the rod, and L is the length of the rod.
Substituting the values given in the problem, we find that the moment of inertia of the rod is
(1/3) * 4.0 kg * (0.50 m)^2 = 0.67 kg*m^2.In this case, the bullet strikes the rod, transferring some of its linear momentum to the rod in the form of angular momentum. The change in angular momentum of the rod is equal to the angular momentum of the bullet.
We can use the conservation of angular momentum to write the following equation:
I1 * w1 + J = I2 * w2where I1 is the initial moment of inertia of the rod, w1 is the initial angular velocity of the rod, J is the angular momentum of the bullet, I2 is the final moment of inertia of the rod, and w2 is the final angular velocity of the rod.
Since the initial angular velocity of the rod is zero, we can simplify the equation as follows:
J = I2 * w2
Substituting the values given in the problem, we find that the angular momentum of the bullet is
0.67 kgm^2 * 10 rad/s = 6.7 kgm^2/s.To determine the speed of the bullet before it strikes the rod, we need to consider the bullet's mass and the angle at which it strikes the rod. The mass of the bullet is given as 3.0 grams, which is equivalent to 0.003 kg. The angle at which the bullet strikes the rod is given as 60 degrees.
We can use the following formula to calculate the speed of the bullet before it strikes the rod:
v = (J/m) * sin(theta)Substituting the values given in the problem, we find that the speed of the bullet before it strikes the rod is (6.7 kg*m^2/s / 0.003 kg) * sin(60 degrees) = 67 m/s. This is the final answer.
Learn more about Angular Momentum here:
https://brainly.com/question/13822610
#SPJ4
what is the equation describing the motion of a mass on the end of a spring which is stretched 8.8 cm from equilibrium and then released from rest, and whose period is 0.66 s ? assume that the displacement at the start of the motion is positive.
The equation for the motion of a mass on the end of a spring with a period of 0.66 seconds and a stretch of 8.8 cm from equilibrium is
y = (8.8cm)cos(3πt).
What is the mathematical formula for the mass's motion?Newton's second law, which states that the force acting on a body is equal to that force multiplied by the acceleration of the center of mass of that body, or F = ma, is the basic equation of motion in classical mechanics.
As we are aware, the SHM equation is as follows:
y = Acos(ωt)
Here, we are aware of
ω = 2π/T
Here it is
T = 0.66s
now that we
ω = 2π/0.66
ω = 3π
We now have
y = (8.8cm)cos(3πt).
To know more about mass visit:
https://brainly.com/question/14017869
#SPJ4
at what temperature, in kelvins, will atoms of a monatomic gas have an average kinetic energy equal to this needed electrical potential energy?
300 kelvin temperature, in kelvins, will atoms of a monatomic gas have an average kinetic energy equal to this needed electrical potential energy.
How do you define potential energy?Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy.
Our knowledge of the cosmos and how we fit into it depends on potential energy. In fact, potential energy and the labor necessary to move an item are determined by the position of the object in the universe. Everything we do has an impact on something's potential energy.
Briefing:KE=3/2KT
=6.21*10(-21)
=3/2*1.30*10(-23)*T
T=300 kelvin
To know more about Potential energy visit:
https://brainly.com/question/24284560
#SPJ4
An obiect drops from a cliff. If
The final velocity of the object after 5 seconds it was dropped is determined as 50 m/s.
What is the final velocity of the object after 5 seconds?The final velocity of the object after 5 seconds it was dropped is calculated by applying the following kinematic equation as shown below.
v = u + at
where;
u is the initial velocity of the objecta is the acceleration of the objectt is the time of motion of the objectDuring the vertical motion of an object, the vertical velocity of the object decreases as the object moves upwards and eventually becomes zero as the object reaches maximum height.
The vertical velocity of the object starts to increase again when the object start falling downwards and becomes maximum before the object hits the ground.
v = 0 + ( 10 m/s² ) ( 5 s )
v = 50 m/s
Learn more about final velocity here: https://brainly.com/question/25905661
#SPJ1
The complete question is below:
if the object falls from the cliff falls with a constant acceleration of 10 m/s2. Find its speed after 5 seconds it was dropped.
the moment of inertia of an object of mass m(a)m(a) is an intrinsic property of the object, (b) depends on the choice of axis of rotation, (c)(c) is proportional to mm regardless of the choice of axis, (d)(d) both (b)(b) and (c)(c) are correct.
Option (B)is correct
depends on the choice of axis of rotation
What does m in a moment of inertia mean?
Formula for Moment of Inertia
Moment of inertia is defined in general form as I = m r2,
where m is the sum of the product of the mass.
r is the separation from the rotational axis.
What elements affect inertia?
The position and orientation of the rotational axis affect a body's moment of inertia. It also depends on the body's size, shape, and how its mass is distributed around a particular axis. Q.
Learn more about Inertia
Visit
https://brainly.com/question/1358512
#SPJ4
171) a force of 16.88 n is applied tangentially to a wheel of radius 0.340 m and gives rise to an angular 171) acceleration of 1.20 rad/s2. calculate the rotational inertia of the wheel.
The rotational inertia of the wheel which has a radius of 0.34 m is 4.782 kgm²
The force applied tangentially to the wheel = 16.88 N
The radius of the wheel = 0.340 m
The angular acceleration of the well = 1.20 rad /s²
The rotational inertia can be found using the formula,
I = F x r / α
where I is the rotational inertia
F is the force applied
r is the radius of the wheel
α is the angular acceleration
Let us substitute the known values in the above equation, we get
I = 16.88 x 0.34 / 1.20
= 5.7392 / 1.20
= 4.782 kgm²
Therefore, the rotational inertia is 4.782 kgm²
Learn more about the rotational inertia in
https://brainly.com/question/22513079
#SPJ4
suppose the gravitational acceleration at the surface of a certain moon a of jupiter is 2 m/s2. moon b has twice the mass and twice the radius of moon a. what is the gravitational acceleration at its surface? neglect the gravitational acceleration due to jupiter.
Neglecting the gravitational acceleration due to jupiter , the gravitational acceleration at the surface of moon b is 8 m/s².
The gravitational acceleration at the surface of the moon is determined using the equation G*M/r^2, where G is the gravitational constant, M is the mass of the object, and r is the radius of the object.
Calculate the gravitational acceleration at the surface of moon a, using the equation for gravitational acceleration:
g = G * M / r2
where G is the gravitational constant (6.67x10-11 Nm2/kg2), M is the mass of the moon, and r is the radius of the moon.
g = 6.67x10-11 Nm2/kg2 * M / r2
g = 6.67x10-11 Nm2/kg2 * (mass of moon a) / (radius of moon a)2
g = 2 m/s2
Step 2: Calculate the gravitational acceleration at the surface of moon b, using the equation for gravitational acceleration:
g = G * M / r2
where G is the gravitational constant (6.67x10-11 Nm2/kg2), M is the mass of the moon, and r is the radius of the moon.
g = 6.67x10-11 Nm2/kg2 * (2 * (mass of moon a)) / (2 * (radius of moon a))2
g = 8 m/s²
Therefore, the gravitational acceleration at the surface of moon b is 8 m/s².
Learn more about gravitational constant at : https://brainly.com/question/858421
#SPJ4
a simple pendulum is 4.00 m long. (a) what is the period of small oscillations for this pendulum if it is located in an elevator accelerating upward at 6.00 m/s2?
The time period of the small oscillations for the simple pendulum is found to be 3.14 seconds.
The pendulum is located in an elevator that is accelerating upwards with an acceleration of 6m/s² and length of the pendulum is 4m.
Because the elevator is accelerating in the upper direction the net acceleration of the pendulum will be (10 + 6)m/s².
The period of small accelerations for this pendulum will be given by the relation,
T = 2π(l/a)
Where, l is the length of pendulum and a is the net acceleration.
Putting values,
T = 2π(4/16)
T = 2π(1/2)
T = π seconds.
T = 3.14 seconds.
So, the time period of this small oscillations for this pendulum is 3.14 second.
To know more about oscillations, visit,
https://brainly.com/question/12622728
#SPJ4
a vertical spring has a spring constant of 100 n/m. when an object is attached to the bottom of the spring, the spring changes from its unstretched length of 0.50 to a length of 0.65 m. the magnitude of the weight of the object is
Answer: Hookes law states F=kX where F is the force applied, k is the spring constant, and X is the extension of the spring from its resting point.Substituting the values in, we get:F=100*(0.65-0.5)=100*0.15=15N
in an experiment, block is given an initial speed toward block , which is initially at rest. the blocks are on a track that has a motion detector set up, as shown above. when the two blocks collide, there is a completely inelastic collision and the blocks move together with speed . the blocks were both placed on a balance, and it is determined that they have the same mass. the experiment is repeated for four different initial speeds, and the data are shown in the chart below. it appears that the resulting data are not accurate. which measurement most likely produced errors in the data seen in the chart below?
The results that we get from the experiment is accurate within the limits of experimental error. Option E
What is true about the experiment?We know that an experiment is the way by which we can be able to establish a cause and effect relationship. In this case, we can see that there is an inelastic collision that has occurred between the two blocks that have collided in the instance that we can see here.
Looking at the set up of the experiment, it is clear that the block is given an initial speed toward block , which is initially at rest. the blocks are on a track that has a motion detector set up, as shown above.
All of the set up is okay based on the way that such an experiment ought to be arranged to enable us to get a very accurate result out of the work that has been done here.
Learn more about experiment:https://brainly.com/question/11256472
#SPJ1
Please help this is urgent
Consider a planet and an asteroid in the solar system. Both their orbits can be considered as a circle. Their distance to the center of the sun differ by a factor of 4. rB = 4 rA
When r increases by a factor of 4, how do period T, angular velocity ω, and linear speed v change respectively?
1. [tex]T_{B}[/tex] = ___ [tex]T_{A}[/tex]
2. [tex]\omega_{B}[/tex]=___[tex]\omega_{A}[/tex]
3. [tex]v_{B}[/tex] = ___[tex]v_{A}[/tex]
A particle moving in a circle has a linear velocity that is related to its angular velocity by the relationship r/r, where r is the radius, based on our understanding of circular motion.The most significant actions must be taken by the person on the outside.
What angular velocity ω, and linear speed v respectively?While linear speed v increases with radius, angular speed does not. For instance, to maintain line with the rest of the marching band, the individual on the outside must take the biggest steps.
Therefore, Every particle with a rigid body is subject to the relation v/ r = at any given time.
Learn more about angular velocity here:
https://brainly.com/question/29557272
#SPJ1
what would most likely happen if coastal north carolina increased implementation of wind energy?
The option that is more likely to happen if coastal north Carolina increased implementation of wind energy is The production of greenhouse gases would decrease.
A gas that produces the greenhouse effect by both absorbing and emitting radiant radiation in the thermal infrared range is referred to be a greenhouse gas. The five main greenhouse gases in the atmosphere of Earth are ozone, carbon dioxide, methane, and water vapor.
A renewable energy source is wind energy. It is non-polluting, never runs out, and reduces the demand for fossil fuels, which are the source of greenhouse gases that cause global warming.
By increasing the implementation of wind energy,
To read more about energy, visit https://brainly.com/question/1932868
#SPJ4
light travels along the length of a 1500-nm-long nanostructure. when a peak of the wave is at one end of the nanostructure, is there a peak or a valley at the other end if the wavelength is (a) 500 nm and (b) 1000 nm?
If the light travels along the length of a 1500 nm , then
(a) if the wavelength is 500 nm then there will be a peak at other end .
(b) if the wavelength is 1000 nm then there will be a valley .
Wavelength is defined as the distance between two consecutive peaks or valleys .
given the length is = 1500 nm ;
we know that , the formula is L = nλ ;
Part (a) ;
for peak at other end ,
n should be a whole number ;
So , λ = 500 nm
n = 1500/500 = 3 ,
Part(b)
λ = 1000 nm ;
n = 1500/1000
= 1.5
Therefore , (a) There will be a peak at other end .
(b) There will not be a peak at other end .
Learn more about Wavelength here
https://brainly.com/question/19542918
#SPJ4
how many molecules of water are in a collection of snowflakes with a mass of 5.00 mg?
A normal snowflake may contain 1,000,000,000,000,000,000, or one quintillion, water molecules.
How many molecules of water are in a snowflake?The variety of sizes and shapes of snowflakes is endless. A lot of them seem to be two-dimensional works of art. Others resemble a tangled collection of ice strands that are beginning to fall apart. While some may fall as multi-flake clusters, most arrive as single particles. The source of all of them is the same: clouds, which typically float at a height of at least one kilometer (0.6 miles).The air up there can get very chilly throughout the winter and will become more colder as you ascend. Those clouds must be below freezing for snowflakes to form. albeit not freezing. A cloud's moisture causes snowflakes to develop. A cloud cannot store enough water for anything to precipitate out if the air temperature is sufficiently low. A balance is therefore required. For this reason, the majority of flakes form at or just below freezing, or 0o Celsius (32o Fahrenheit). Cooler climates can produce snow, but the less moisture there is to form snowflakes the colder it gets.In reality, for a flake to develop, the air inside a cloud must be super-moisture-dense. Because of this, there is more water in the air than is ordinarily feasible. When a substance is supersaturated, the relative humidity might exceed 101 percent. This indicates that 1% more water than the air should be able to carry is present.A cloud will attempt to expel extra water vapor from the air if there is an excessive amount present. Some of that surplus has the potential to crystallize and flash freeze, after which it will slowly drift to the earth.To Learn more About snowflake refer to:
https://brainly.com/question/27563698
#SPJ1
boat moves north at a velocity of 2.5 m/s while the current moves downstream at 6.0 m/s east. What is the resultant velocity of the boat, relative to an observer on the shore?
A) 4.5 m/s, NE
B ) 4.5 m/s, SE
C ) 6.5 m/s, NE
D ) 6.5 m/s, SE
E) 8.5 m/s, NE
Relative to the observer in on the shore, the velocity of the boat is 6.5 m/s, NE.
What is relative velocity?
The velocity of an object in relation to another observer is known as its relative velocity.
We cay say that the relative velocity is equal to the vector difference between the velocities of two objects. The relative velocity of A with respect to B= velocity of the body A – velocity of the body B.
The diagram below shows the calculation where AC is relative speed, AB is speed of the boat and BC is the speed of stream.
To learn more about relative velocity from the given link
https://brainly.com/question/19260269
#SPJ1
A car travels down a road at a certain velocity, vcar. The driver slows down so that the car is traveling only a third as fast as before. Which of the following is the correct expression for the resulting velocity?
a. 2vcar
b. 1/3vcar
c. -1/2vcar
d. -2vcar
The correct expression for the resulting velocity is -1/2 vcar. The correct option is c.
What is velocity?
The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.
A car travels down a road at a certain velocity, is Vcar.
Let the initial velocity of the car travel downward be -V car
It is also, given, that the driver slows down so that the car is traveling only half as fast as before.
Resulting velocity = -1/2 vcar
Therefore, the correct option is c. -1/2vcar.
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ1
PLEASE HELP I PAY 88 POINTS AND THANK YOU AND BRAINLIEST
Instructions: Answer the following questions in the space provided. Be sure to write your responses in complete sentences.
A father pushes his daughter and son on a sled down a hill.
Part A: Other than the force exerted by the father pushing the sled, identify two additional forces that act on the sled as it travels from the top of the hill to the bottom. (2 pts)
Part B: Explain how each force you identified in Part A will affect the motion of the sled. (2 pts)
Answer: Down below is the answer in complete sentences!
Explanation:
PART A:
Gravity and Acceleration are two additional forces acting upon the sled.
PART B:
Gravity will affect the sled by pulling it down, since the slope of the hill is negative.
Acceleration will affect the sled by gradually increasing it's speed, since the slope is downwards, which in addition to the initial force exerted plus gravity increases the speed, thus the sled accelerates.
based on its surface temperature of 6,000 k, most photons that leave the sun's surface lie in which region of the electromagnetic spectrum?
Most photons that leave the sun's surface have a surface temperature of 6,000 K, which corresponds to the visible light region of the electromagnetic spectrum.
The electromagnetic spectrum is a continuous range of wavelengths and frequencies that includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The wavelengths and frequencies of these different types of electromagnetic radiation are all different and correspond to different regions of the spectrum.
The visible light region of the electromagnetic spectrum is the portion of the spectrum that can be seen by the human eye. It ranges from about 400 nanometers (nm) to about 700 nm in wavelength, and corresponds to frequencies of about 7.5 x 10^14 Hz to about 4.3 x 10^14 Hz. Photons with wavelengths and frequencies in this range have enough energy to excite the photoreceptors in the human eye, allowing us to see them.
Learn more about Electromagnetic Spectrum here:
https://brainly.com/question/13803241
#SPJ4
a child forces a styrofoam ball under the surface of a container of water. if the child must apply 581 n to totally submerge the ball, what is the diameter d of the ball?
The diameter of the ball is 0.4998 m.
Given,
F=581n
Density of water pw= 1.0 x 10³ kg/m³
Density of styrofoam pfoam=95.0 kg/m³
Fb=Buoyancy force
W= Weight of ball
from the Figure
f+w=Fb
Fb-W=f
4/3πR³pwg-4/3πRpfoamg=f
4/3πR³(1000-95) x 9.81=581
R=0.2499m
then the diameter of the ball
d=2R
d=2 x 0.2499
d=0.4998m
the diameter d of the ball = 0.4998m
In physics, force is that power that can change the motion of an item. Pressure also can be described intuitively as a push or a pull.
Force is a push or a pull and it affects our daily lives because, without force, people might not be capable of opening and near stuff or lifting up their arms or legs.
Variety of Forces :
* Frictional Forces
* Tension force.
* Spring force.
* Gravitational pressure.
Learn more about Force here:-brainly.com/question/12785175
#SPJ4
The diameter of the ball is 0.4998 m.
What is diameter?
Any straight line segment that cuts through the centre of a circle and has ends that are on the circle is considered a circle's diameter in geometry. It is also known as the circle's longest chord. The diameter of a sphere can be defined using either of the two methods.
F=581n
Density of water pw= 1.0 x 10³ kg/m³
Density of styrofoam pfoam=95.0 kg/m³
Fb=Buoyancy force
W= Weight of ball
from the Figure
f+w=Fb
Fb-W=f
4/3πR³pwg-4/3π Rpfoamg =f
4/3πR³(1000-95) x 9.81=581
R=0.2499m
then the diameter of the ball
d=2R
d=2 x 0.2499
d=0.4998m
the diameter d of the ball = 0.4998m
In physics, force is that power that can change the motion of an item. Pressure also can be described intuitively as a push or a pull.
Force is a push or a pull and it affects our daily lives because, without force, people might not be capable of opening and near stuff or lifting up their arms or legs.
Variety of Forces :
* Frictional Forces
* Tension force.
* Spring force.
* Gravitational pressure.
to learn more about diameter visit
https://brainly.com/question/13624974
#SPJ4
What is the primary classification trait used to explain how scientists divide rocks into the three classification groups?
a. Composition
b. Formation
c. Location
d. Texture
Composition and texture is the primary classification trait used to explain how scientists divide rocks into the three classification.
How are rocks divided into the three classification groups by scientists?Rocks can be categorized in one of two ways: first, according to the processes by which they form, with rocks being categorized as either sedimentary, igneous, or metamorphic. Grain or crystal size is another common way to categorize rocks.
Two criteria—texture and composition—are used to categorize rocks. The sizes, shapes, and relationships between the various mineral grains and other components that make up a rock are what determine its texture. The process that created the rock controls these elements.
To know more about primary classification of rocks visit:
https://brainly.com/question/13354874
#SPJ4
Which of these does a balanced chemical
equation show?
the speed of a reaction
elements created by a reaction
phase changes taking place during a
reaction
the number of atoms involved in a reaction
A balanced chemical reaction shows the element created by the reaction, phase changes during the reaction, and the number of atom involved in it.
What are balanced chemical equation?
A balanced chemical equation is a chemical equation in which the number of atoms for each element in the reaction are equal on both sides of the equation. This is important in chemistry because it ensures that mass is conserved in a chemical reaction. For example, the combustion of methane (CH4) can be represented by the following balanced chemical equation:
CH4 + 2O2 → CO2 + 2H2O
In this equation, there are 4 atoms of carbon (C) on the left side and 4 atoms of carbon on the right side, indicating that all of the carbon has been accounted for in the reaction. There are also 8 atoms of oxygen (O) on the left side and 8 atoms of oxygen on the right side, 4 atoms of hydrogen (H) on the left side and 4 atoms of hydrogen on the right side, and 4 atoms of oxygen (O) on the left side and 4 atoms of oxygen on the right side, indicating that all of the elements have been accounted for in the reaction.
To learn more about balanced chemical equations
https://brainly.com/question/26694427
#SPJ1
a current of 11 amps at 240 volts flows through an electric range. if it is user an average of 1 hour/day Calculate the kwhr used per week.
The kWh used per week by the electric range whose voltage and current is 240 V and 11 A respectively is 18.48 kWh.
What is electric kilowatt-hour (kWh)?
A kilowatt-hour is a unit of energy: one kilowatt of power for one hour. In terms of SI derived units with special names, it equals 3.6 megajoules (MJ).
To calculate the kWh per week of the electric range, we use the formula below.
Formula:
E = VIt/1000...............Equation 1Where:
E = Electric energy in kWh per week V = VoltageI = Currentt = Total timeFrom the question,
Given:
V = 240 VI = 11 ampst = 1 hour per day = 1×7 = 7 hours per weekSubstitute these values into equation 1
E = 240×11×7/1000E = 18.48 kWhHence, the kWh used per week is 18.48 kWh.
Learn more about electric kilowatt-hour (kWh) here: https://brainly.com/question/13494371
#SPJ1
to meet a u.s. postal service requirement, footwear must have a coefficient of static friction of 0.525 or more on a specified tile surface. a typical athletic shoe has a coefficient of 0.785. in an emergency, what is the minimum time interval in which a person starting from rest can move 2.85 m on a tile surface if she is wearing the following footwear?
A minimal time period is required to accelerate through x=3.00m because maximal static friction produces the force that creates maximum acceleration.
Explain what an acceleration is.acceleration is the rate of change in both direction and speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. Because of direction is always shifting, motion on a circle accelerates even while the speed is constant.
A person moves by the help of frictional force, as a result of gtound reaction. So, the formula for frictional force is:
F = μR
where,
F = frictional force
μ = coefficient of friction
R = Normal Reaction = Weight of Body = W = mg
Therefore,
F = μmg
but, from Newton's 2nd Law of Motion:
F = ma
Comparing both equations, we get:
μmg = ma
a = μg ---------- equation (1)
Now, to calculate the distance moved by a body, we use 2nd equation of motion:
s = (Vi)(t) + (0.5)at²
using equation (1), we get:
s = (Vi)(t) + (0.5)μgt²
where,
s = distance moved by body
Vi = initial velocity of body
t = time taken to cover the distance
g = acceleration due to gravity
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.5
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.5)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.5)(9.8 m/s²)
t = √1.30612 s²
t = 1.14 s
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.5
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.5)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.5)(9.8 m/s²)
t = √1.30612 s²
t = 1.14 s
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.87
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.87)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.87)(9.8 m/s²)
t = √0.75 s²
t = 0.87 s
What are acceleration and speed exactly?The rate of change in displacement is known as velocity. Acceleration is the rate at which speed changes. The fact that velocity contains both magnitude and orientation makes it a vector quantity. Acceleration is also a vector quantity since it is simply the rate during which velocity varies.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
what are the magnitude and location (with respective to point a) of the resultant force on the horizontal gate? the gate width is w. fluid density is r. you can leave your answer in terms of variables (w, r, and g).
The magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.
What is magnitude?Magnitude is a measure of the size or intensity of a physical quantity. It is usually defined as the absolute value of the numerical value of the physical quantity, and is often expressed in terms of a unit of measurement. Magnitude can refer to a variety of different physical quantities, such as size, intensity, brightness, or energy. Magnitude can also refer to the relative size or intensity of two or more physical quantities, when compared to each other.
The resultant force on the horizontal gate is equal to the sum of the hydrostatic forces acting on the gate.
Since the gate is horizontal, the hydrostatic forces acting on the gate will be equal to the pressure difference between the top and bottom of the gate.
This pressure difference is equal to the product of the fluid density, gravitational acceleration, and the gate width.
Therefore, the magnitude of the resultant force on the gate will be:
F = w * r * g
The location of the resultant force on the gate will be at the center of the gate, which is point A.
Therefore, the magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.
To learn more about magnitude
https://brainly.com/question/24468862
#SPJ4
Which one of the following statements concerning electromagnetic waves is false?a. One form of electromagnetic radiation is visible light.b. All electromagnetic waves travel through a vacuum region at the speed of light.c. All electromagnetic waves are transverse waves.d. All electromagnetic waves have the same frequency.e. Electromagnetic waves can travel through solids, liquids, gases, and vacuumregions
Answer:
.Answer: d. All electromagnetic waves have the same frequency.
All living organisms are mainly composed of what elements? * 1 point A. Carbon, Phosphorus, Nitrogen, Oxygen, Potassium B. Calcium, Phosphorus, Nitrogen, Oxygen, Vibranium C. Oxygen, Carbon, Hydrogen, Nitrogen, Phosphorus D. Sodium, Carbon, Nitrogen, Hydrogen, Helium
All living organisms are mainly composed of the elements: Oxygen, Carbon, Hydrogen, Nitrogen, Phosphorus.
The correct answer choice is option c.
What are living organisms?Living organisms are those things that has life. They include plants and animals. Living organisms be it plants or animals are composed of important elements such as carbon, oxygen and others.
However, there are certain characteristic features which living organisms possess. Some of these characteristics of living things are as follows:
Movement: The ability of living organisms to move from one place to another or to move Its body parts. There are two major types of movement known in living organisms. These are: Active movementPassive movementOther characteristics of living organisms are:
RespirationNutritionIrritabilityGrowthExcretionReproduction AdaptationCompetitionIn conclusion, we can now confirm from above the explanation given above that living things are made up of certain elements.
Read more on living organisms:
https://brainly.com/question/17259533
#SPJ1
newton's second law in 1 dimension: what magnitude net force is required to accelerate a 1200-kg car uniformly from 0 m/s to 27.0 m/s in 10.0 s?
The required force is F = 3240 N.
As a result,
1200 kg is the car's mass.
Initial speed of the vehicle, u = 0.
The car's final speed is 27 meters per second.
Thus we have to first calculate the acceleration and then substitutes its value in the force formula
Taking time, t = 10 s
F = m a, where a represents the vehicle's acceleration, is the formula for the required force.
a= v - u / t
thus a = 27 - 0/ 10
a = 27/ 10
F = 1200 X 27 / 10
F = 3240 N.
Therefore, this is the necessary solution.
To know more about force you may visit the link:
https://brainly.com/question/28875770
#SPJ4
197) a submarine in neutral buoyancy is 100 m below the surface of the water. what air pressure must 197) be supplied to remove water from the ballast tanks in order for the submarine to surface?
Air pressure must be supplied to remove water from the ballast tanks is 9.8*105 N/m^2.
Buoyancy is the upward force exerted by a liquid that opposes the weight of a partially or fully submerged object. In a liquid column, the pressure increases with depth due to the weight of the liquid above. Therefore, the pressure at the bottom of the liquid column is higher than the pressure at the top of the column. Similarly, the pressure at the bottom of an object immersed in liquid will be greater than at the top of the object. A pressure differential results in a net upward force on an object. The magnitude of the force is proportional to the pressure difference and corresponds to the weight of the liquid (as explained by Archimedes' principle). This is the displaced liquid that would otherwise occupy the underwater volume of the object.
We know that pressure below the surface of water is P1 = Po +hdg
pressure at the surface of water is P2 = Po
Then pressure difference is P = P1 -P2 = hdg
h = depth = 100 m
d = density of water = 1000 kg/m3
g = 9.8 m/s2
Then P = 100*1000*9.8 = 9.8*105 N/m^2
Learn more about Buoyancy here:
https://brainly.com/question/451053
#SPJ4
a watermelon explodes into three equal masses. one mass moves east at 15.0 m/s. if a second mass moves at a velocity of 10.0 m/s 45.0o s of e, what is the velocity of the third mass? (hint: the total momentum is zero, so how will your vector arrows add up?)
The velocity of third mass of watermelon is 3.12m/sec if it explodes into three equal masses.
We know that we need to conserve the momentum of watermelon in a certain direction.Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.
Now,initial momentum of watermelon=0Kg-m/sec
Alos,we know that momentum =mass× velocity
Now,suppose watermelon has mass m.When it explodes into three equal parts,then the mass of each watermelon pieces is m/3
=>So,final momentum of piece moving to east=(m/3)×15
Similarly final momentum of second and third piece are
(m/3)×10×1/√2 and (m/3) × v × (1/√2)
So,conserving momentum,we get
=>0=(m/3) × 15 +((m/3)×10×1/√2 ) + (m/3)×10×1/√2 )×v
=> - (15 + 10/√2) = (10/√2)×v
=> - (15√2 + 10) = 10v
=>v = (15√2 + 10)/10
=>v= -(21.21+10)/10
=>v= -31.21/10
=>v= -3.12m/sec
Here negative sign shows that mass will move opposite direction to first piece.
Hence, required velocity is 3.12m/sec.
To know more about velocity, visit here:
https://brainly.com/question/18084516
#SPJ4
an airplane flies horizontally at a speed of 351 km/h and drops a crate that falls to the horizontal ground below. neglect air resistance.part (a) if the altitude of the plane was 580 m, then how far, horizontally in meters, did the crate move as it fell to the ground?
Refer to the attached photos. I would appreciate a rate :)
