A sample of oxygen gas has a volume of 89.6 L at STP. How many moles of oxygen gas are present ?

B. The study of matter and energy.

Because physical science is everything that doesn't include organic things.

The  study of matter and energy among the following  best describes physical science.

Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it possess volume .Matter is composed up of atoms which may or not be of same type.

Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states  of substances such as solids, liquids and gases depending on the conditions of  the temperature and  the pressure.

The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter is always conserved by law of conservation of matter.The law was proposed by Antoine Lavoisier.

Learn more about matter,here:

https://brainly.com/question/9477180

#SPJ7

After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

First, we will write the balanced equation for the reaction

H₂SO₄ + BaCl₂  → BaSO₄ + 2HCl

This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl

From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.

For H₂SO₄

mass = 50.0g

Molar mass = 98.079 g/mol

From the formula

Number of moles = Mass / Molar mass

∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol

Number of moles of H₂SO₄ = 0.5098 mol

For BaCl₂

mass = 40.0 g

Molar mass = 208.23 g/mol

∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol

Number of moles of BaCl₂ = 0.1921 mol

Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)

From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂

∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.

Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.

Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles

Now, we will convert this to grams

From the formula

Mass = Number of moles × Molar mass

Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol

Mass of H₂SO₄ that will remain = 31.1597 g

Mass of H₂SO₄ that will remain ≅ 31.16 g

Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

Learn more here: https://brainly.com/question/6857557

The correct answer is C. square planar

According to the Valence Shell Electron Pair Repulsion Theory(VSEPR), The shape of a molecule depends on the number of electron pairs in the molecule.

VSEPR theory was first coined by Gillespie  and Nyhlom in 1957 as an improvement over the Sidgwick - Powell theory.

According to this theory, the shape of a molecule is determined by the number of electron pairs that surround the valence shell of the central atom in the molecule.  The electron pairs are positioned as far apart in space as possible to minimize repulsion of electron pairs.

However, the presence of lone pairs distorts the shape anticipated for the molecule on the basis of VSEPR.

For a molecule having six electron pairs, an octahedral geometry is expected(electron domain geometry). However, the presence of two lone pairs which are positioned at opposite side of the four single bonds leads to an observed square planar molecular geometry.

https://brainly.com/question/13591921

Answer:

square planar

Explanation:

Answer:

Systems move from ordered behavior to more random behavior.

Explanation:

Entropy refers to the degree of disorderliness in a system. The second law of thermodynamics can be restated in terms of entropy as follows; “any spontaneous process in any isolated system always results in an increase in the entropy of that system.''(science direct)

According to this law, systems tend towards a more disorderly behaviour (increase in entropy) hence the answer given above.

Answer:

a)  [tex]V_1=5ul[/tex]

b)  [tex]v=20ul[/tex]

Explanation:

From the question we are told that:

initial Concentration [tex]C_1=50mg/ml[/tex]

Final Concentration [tex]C_2=10mg/ml[/tex]

Final volume needs [tex]V_2 =25ul[/tex]

Generally the equation for Volume is mathematically given by

[tex]C_1V_1=C_2V_2[/tex]

[tex]V_1=\frac{C_1V_1}{C_2}[/tex]

[tex]V_1=\frac{10*25}{50}[/tex]

[tex]V_1=5ul[/tex]

Therefore

The volume of buffer needed is

[tex]v=V_2-V_1\\\\v=25-5[/tex]

[tex]v=20ul[/tex]

Stoichiometry refers to the relationship between the moles of reactants and products.

This question must be solved using both stoichiometry and the gas laws

The reaction equation is;

2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)

Number of moles of Al = 3g/27g/mol = 0.11 moles

According to the reaction equation;

2 moles of Al yields 3 moles of H2

0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles

From the ideal gas equation;

PV=nRT

P = ?

n= 0.165 moles

V = 0.85 L

T = 297 K

R = 0.082 atmLK-1mol-1

P= nRT/V

P = 0.165 * 0.082 * 297/0.85

P= 4.73 atm

P1 = 4.73 atm

T1 = 297 K

V1 = 0.85 L

P2 = 1 atm

T2 =273 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 =  4.73 * 0.85 * 273/1 * 297

V2 = 3.69 L

P1 = 760 mmHg

T1 = 273 K

V1 = 3.69

P2 = 438 mm Hg

T2 = 284.2 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 = 760 * 3.69 * 284.2/438 *273

V2 = 797010.48/119574

V2= 6.67 L

https://brainly.com/question/1190311

Answer:

a. liquid

b. solid

c. gas, (should be at it's boiling point)

Explanation: If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature. Benzene melts at 6°C and boils at 80°C; it is a liquid at room temperature. If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.

if you need an explanation to each lmk

Answer:

25.88 g/mol

Explanation:

Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.

So from Graham's law, we have,

[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]

Using the sample of Kr gas having M = 83.8

[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]

[tex]$M^{0.5}= 5.088$[/tex]

M = 25.88 g/mol

Answer:

"They established the laws of planetary motion"

Explanation:

Mr. Kepler was the astronomer who came up with the "Laws of Planetary Motion."

Answer:

D. Baking bread

Explanation:

In this process, energy is absorbed and in an endothermic process energy is absorbed too.

Baking bread is an example of an endothermic process, therefore option (d) is correct .

Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.

An endothermic reaction is  accompanied by an absorption of heat.

Endothermic  reactions cause a cooling effect by lowering the temperature of the surrounding environment.

A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .

Baking bread is an example of an endothermic process, hence  option (d) is correct .

Learn more about endothermic process ,here:

https://brainly.com/question/23184814

#SPJ5

Answer:

1176 grams

Explanation:

nH2SO4 =2*6=12 mol

mH2SO4=12*98=1176 grams

Answer:

solution given:

molarity of H₂SO₄=6 M

volume=2L

no of mole =6M*2=12mole

we have

mass =mole* actual mass=12*98=1176g

the mass is 1176g.

Answer:

Answer:

The phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

Explanation:

The structure of nucleic acid polymers is built up from monomers of nucleotides.

A nucleotide consists of a sugar backbone which is either a ribose or deoxyribose sugar, a nitogenous base which is either a purine or pyrimidine, and a phosphate group. The nitrogenous base is attached to the carbon number 1 or C-1 of the sugar backbone by a covalent bond. The phosphate group on the other hand is covalently attached to the carbon number 5 or 5' carbon of the sugar backbone.

When polymers of nucleic acids are formed, the phosphate at the 5' carbon of the sugar backbone is covalently linked in a phosphodiester bond to the 3' carbon of the sugar backbone in another nucleotide molecule, thus extending the strands of the nucleic acid molecule.

Nucleases are enzymes that break down the phosphodiseter bonds in nucleic acids resulting in nucleotide monomers. After complete digestion ofmthe nucleic acid polymer by nucleases, the phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

Answer:

1 ethanol is right answer

Explanation:

CH3- CH2-OH

Answer:

10 ms-1

Explanation:

Kinetic energy = 1/2 × m × v^2

1 = 1/2× 20 ×10^ -3 × v^2

v ^ 2 = 100

v = 10 ms-1

note : convert grams in to kg before substitution as above

Given:

Kinetic energy,

Mass,

We know the formula,

→ [tex]K.E = \frac{1}{2} mv^2[/tex]

By putting the values, we get

       [tex]1 = \frac{1}{2}\times 20\times 10^{-3}\times (v)^2[/tex]

     [tex]v^2 = 100[/tex]

       [tex]v = \sqrt{100}[/tex]

       [tex]v = 10 \ m/s[/tex]

Thus the above response is correct.

Learn more about K.E here:

https://brainly.com/question/24997625

Dynamic equilibrium is showed at the point at which solid liquid and gas intersect.

At the point at which solid liquid and gas intersect represents a system that shows dynamic equilibrium. There is equal amount of reactants and products at the point of dynamic equilibrium because the transition of substances occur between the reactants and products at equal rates, means that there is no net change. Reactants and products are formed at the rate that no change occur in their concentration.

https://brainly.com/question/24310467

Answer:

Avogadro's number is 1 mol  = 6.02 * 10^23 elements

It means that 1 mol of atoms is 6.02 * 10^23 atoms

1 mol of atoms = 6.02 * 10^23 atoms

From there, if you divide both sides by 1 mol of atoms, you get

1 = 6.02 * 10^23 atoms / 1 mol of atoms.

That means, that to pass from a number of moles of atoms to number of atoms you have to multipby by the conversion factor

         6.02*10^23  atoms Al/ 1 mol Al

That is the second option of the list.

Explanation:

Answer:

a. True.

Explanation:

Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.

weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C

take an example of ethanol:

[tex]{ \bf{CH _{3} CH_{2}OH \: \: \frac{Ag/O_{2} }{500 \degree C} > \: \:CH _{3} CHO}}[/tex]

[tex]{ \sf{CH _{3} CHO \: \: is \: ethanal}} [/tex]

By ozonolysis:

Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.

take an example of propanol:

if it undergoes ozonolysis, it gives ethanal and methanal.

Answer:

A. True

Explanation:

Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.

weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C

take an example of ethanol:

By ozonolysis:

Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.

take an example of propanol:

if it undergoes ozonolysis, it gives ethanal and methanal.

Answer:

Sorry I don't know what you

According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/13383562

#SPJ2

Answer:

Following are the response to the given question:

Explanation:

In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.

Answer:

Part A

HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)

Part B

ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)

Explanation:

The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;

RCOOH + NaOH ----> RCOONa + H2O

We have to note the fact that the net ionic reaction still remains;

H^+(aq) + OH^-(aq) ---> H2O(l)

In both cases, the reaction can occur and they actually do occur as written.

Answer:

3.89 ×10^-5

Explanation:

Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;

p(H2O) = 0.0900 bar

p(H2) = 0.00100 bar

p(O2) = 0.00350 bar

The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)

Kp= p(H2) . p(O2)/p(H2O)

Kp= 0.00100 × 0.00350/0.0900

Kp= 3.89 ×10^-5

Answer:

ITS ANSWER IS

OPTION B. ATOMIC NUMBER

HI HAVE A NICE DAY

Explanation:

here's the answer to the question

Answer:

0.0347 moles of hydronium ions

Explanation:

The equation of the neutralization reaction between hydroxide and hydronium ions is given below:

H₃O+ (aq) + OH- (aq) ----> 2 H₂O (l)

From the equation above, 1 mole of hydroxide ions will neutralize one mole hydronium ions.

The moles of hydroxide ions present in 1 teaspoon or 5 mL of antacid product is calculated as follows:

Number of moles = mass / molar mass

Molar mass of Magnesium hydroxide, Mg(OH)₂ = 58 g/mol

Molar mass of aluminium hydroxide, Al(OH)₃ = 78 g/mol

Mass of magnesium hydroxide = 450 g = 0.45 g

Mass of aluminium hydroxide = 500 mg = 0.5 g

Moles of magnesium hydroxide = (0.45/58) moles

Moles of aluminium hydroxide = (0.5/78) moles

Equation of the ionization of magnesium hydroxide and aluminium hydroxide is given below:

Mg(OH)₂ (aq) ----> Mg²+ (aq) + 2 OH- (aq)

Al(OH)₃ (aq) ---> Al³+ (aq) + 3 OH- (aq)

Number of moles of hydroxide ions present in (0.45/58) moles of magnesium hydroxide = 2 × (0.45/58) moles = 0.0155 moles

Number of moles of hydroxide ions present in (0.5/78) moles of aluminium hydroxide = 3 × (0.5/78) moles = 0.0192 moles

Total moles of hydroxide ions = 0.0155 + 0.0192 = 0.0347 moles hydroxide ions

Therefore, 0.0347 moles of hydroxide ions will neutralize 0.0347 moles of hydronium ions.

Answer:

-376 kJ

Explanation:

The first step equation:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]    ---- (1)

The second step equation:

[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex]      ---- (2)

To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.

From the above equations; let multiply equation (1) by 1 and equation (2) by 2.

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]     ---- (3)

[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex]      ----- (4)

adding the above two equations, we have:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]

Now, from the recent equation, we have:

2 moles of nitric acid = -752 kJ

∴

1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles

1 mole of nitric acid will be: = -376 kJ

Answer:A) V = 16.892 ml

Explanation:

M1 * V1 = M2 * V2

14.8 M * V1 =0.250 M * 1000 ml

V1 = 16.892 ml

a. The volume of 16.89 milliliters of the stock solution of 14.8 M  should be diluted to make 1000.0 mL of 0.250 M.

b. The concentration of the final solution is 0.296 M.

The concentration or the volume of the concentrated or dilute solution can be calculated by using the equation:

M₁V₁ = M₂V₂

where M₁ and V₁ are the concentration and volume of the concentrated solution respectively and M₂ and V₂ are the concentration and volume of the dilute solution.

A stock solution is a solution that has a high concentration and that will be diluted to a low concentration by the addition of water in it.

Given, a stock solution of concentration, M₁ = 14.8 M

The concentration of the diluted solution, M₂ = 0.250 M

The volume of diluted solution, V₂  = 1000ml

Substitute the value of the molarity and volume in equation (1):

(14.8)× (V₁) = (1000) × (0.250)

V₁ = 16.89 ml

Similarly, for part (b): M₁ = 14.8 M, V₁ = 10 ml and V₂  = 0.5L = 500 ml

(14.8)× (10) = (500) × (M₂)

M₂ = 0.296 M

Learn more about dilution law, here:

https://brainly.com/question/15718488

#SPJ5

Answer:

Transition temperature is the temperature at which a substance changes from one state to another.

Allotropy is the existence of an element in many forms.

Answer:

17

Explanation:

Step 1: Calculate the needed concentrations

[A]i = 1.00 mol/5.00 L = 0.200 M

[B]i = 1.80 mol/5.00 L = 0.360 M

[B]e = 1.00 mol/5.00 L = 0.200 M

Step 2: Make an ICE chart

        A(aq) + 2 B(aq) ⇄ C(aq)

I       0.200    0.360        0

C        -x           -2x         +x

E     0.200-x  0.360-2x   x

Then,

[B]e = 0.360-2x = 0.200

x = 0.0800

The concentrations at equilibrium are:

[A]e = 0.200-0.0800 = 0.120 M

[B]e = 0.200 M

[C]e = 0.0800 M

Step 3: Calculate the concentration equilibrium constant (K)

K = [C] / [A] × [B]²

K = 0.0800 / 0.120 × 0.200² = 16.6 ≈ 17

Answer:

gggggggggg

Explanation:

gggggggg

The tripeptide formed from threonine, glycine and alanine is neutral at the pH of 7.3. The carboxylic end is negative charged by donating its proton to form the NH₃⁺ group.

Peptides are protein units formed from two or more amino acids bonded through peptide bonds. There are essential and non-essential amino acids. Essential amino acids have to be uptake from food and non-essential amino acids are synthesized inside the body.

Threonine is an essential amino acid with a CH₃CHOH side group. Glycine has the simplest side group hydrogen and alanine has  CH₃ side chain. Both glycine and alanine are non-essential amino acids.

Each amino acids are represented with a three letter code or one letter symbol. Thus threonine is T,  G for glycine and A for alanine. At a pH of 7.3 the peptide formed from these amino-acids contains a negatively charged carboxylic end.

A positively charged amino end made by protonation from the acid group make the overall charge zero. The structure of the peptide is given in the uploaded image.

To find more about peptides, refer the link below:

https://brainly.com/question/11843803

#SPJ2