A rock's mass is a:
A. all of the above
B. chemical property
C. physical property
D. constant property

Answer:

B. Similar fossils were found in different continents.

Answer:

B. Similar fossils were found in different continents.

Explanation:

Answer:

it went under the process known as crystalization

Explanation:

am a chemist

The temperature and the strength of the metallic link are the two most crucial variables that can impact how malleable a metal or alloy is.

A metal is a substance that has a shiny look when freshly processed, polished, or shattered, and conducts electricity and heat rather effectively. Generally speaking, metals are malleable and ductile.

The amount of pressure that a metal can sustain without breaking can be used to gauge its malleability. Varied metals have different degrees of malleability because of variations in their crystal structures.

The temperature of the metal and the strength of the metallic connection are the two parameters that define how malleable a metal or metal alloy will be.

Thus,  The kind of the metallic connection can have a significant impact on how easily metal atoms can rearrange themselves.

To learn more about metal, follow the link;

https://brainly.com/question/18153051

#SPJ2

Answer:

See explanation below

Explanation:

First, let's write the reaction:

NH₄SH(s)   <------> H₂S(g) + NH₃(g)

The reaction is already balanced so we don't need to do anything else.

Second, let's take into account the following. The Kc expression for this reaction, only compounds in gaseous state are the only ones that contribute to the equilibrium. Solid and liquid do not contribute to the Kc expression. This is because solid and liquid have a constant concentration near to 1, so, it won't do any difference.

Knowing this, the Kc expression for this reaction is:

Kc = [H₂S] [NH₃]

Now, to calculate Kp from Kc, there's an expression that helps a lot to do this. The expression is the following:

Kp = Kc (RT)ᵃⁿ    (1)

Where:

R: universal constant of gases

T: Temperature in K

ᵃⁿ = difference of the coefficients of the reaction.

This expression comes from the fact that Kp is an expression that instead of working with concentrations, it works with pressure.

If we use the ideal gas equation we have:

PV = nRT

Solving for P:

P = nRT/V        and C = n/V   so

P = CRT

If we now replace this, in the Kp expression of equilibrium we have:

Kp = pH₂S * pNH₃

Kp = ([H₂S]RT)¹ ([NH₃]RT)¹

Kp = (RT)¹⁺¹ ([H₂S] [NH₃])

Kp = (RT)²Kc

So finally the expression for Kp would be:

Hope this helps

Answer:

Mass =  76986  g

Explanation:

Given data:

Dimensions of tank = 126 cm× 47 cm× 13 cm

Mass of water required to filled = ?

Solution:

First of all we will calculate the volume of tank which is equal to the volume of water required to fill it.

Volume = length ×height ×width

Volume = 126 cm × 13 cm× 47 cm

Volume = 76986 cm³

Mass of water:

Mass = density × volume

density of water is 1 g/cm³

Mass = 1 g/cm³× 76986 cm³

Mass =  76986  g

Answer:

1. 0.74mol

2. 0.42mol

3. 2.125mol

4. 0.301mol

5. 4.52 × 10^23 particles

Explanation:

Number of moles (n) in a substance can be found using the formula:

mole (n) = mass/molar mass

Using this formula, the following moles are calculated:

1. Molar of Na = 23g/mol

mole = 17/23

mole = 0.74mol

2. Molar mass of Na2SO4 = 23(2) + 32 + 16(4)

= 46 + 32 + 64

= 142g/mol

Mole = 60/142

mole = 0.42mol

3. Molar mass of CO2 = 12 + 16(2)

= 12 + 32

= 44g/mol

mole = 93.5/44

mole = 2.125mol

4. Molar mass of sodium nitrate (NaNO3) = 23 + 14 + 16(3)

= 23 + 14 + 48

= 85g/mol

mole = 25.6/85

mole = 0.301mol

5. Number of particles in one mole of a substance is 6.022 × 10^23 particles. Hence, in 0.75mol of calcium hydroxide (Ca(OH)2, there will be;

0.75mol × 6.02 × 10^23

= 4.515 × 10^23

= 4.52 × 10^23 particles

Answer:

A) 2

Explanation:

Answer:

2, i got it right thanks to the other user :) <3

Explanation:

Answer:

See explanation

Explanation:

Weathering refers to the breakdown of rocks to form soil. There are several agents of weathering.

In warmer regions, there are more vegetation and microorganisms and they increase the rate of biological weathering.

Since weathering leads to the formation of soil and the rate of weathering is greater in warmer climates, it also follows that as temperature increases and more soil is formed, erosion will happen faster at this higher temperature owing to the presence of more soil compared to colder climates.

There is a huge and direct effect of temperature on the rates of erosion.

The highest rate of weathering occurs in warm and wet climate because in warm and wet climatic regions, more rainfall occurs which increase the rate of weathering. Rainfall and temperature can affect the rate in which rock weathering occurs.

High temperatures and greater rainfall increase the rate of chemical weathering. Rocks in tropical regions exposed to abundant rainfall so we can conclude that hot temperatures weather much faster than similar rocks residing in cold, dry regions.

Learn more: https://brainly.com/question/20929061

Answer:

It replaces Br in MgBr2.

Explanation:

Hello!

In this case, when carrying out double displacement reactions, we need to take into account that cations and anions are switched; thus, when LiCl and MgBr2 react, since Li and Mg are the cations, Br and Cl switch as shown below:

[tex]2LiCl+MgBr_2\rightarrow 2LiBr+MgCl_2[/tex]

Thus, chlorine replace Br in MgBr2 to form MgCl2.

Best regards!

Answer: Equation 1, because Zn being more reactive, replaces Ag from AgNO3

Explanation: I got it right on the quiz and it replaces it

Answer:

i = 2.79

Explanation:

The excersise talks about the colligative property, freezing point depression.

Formula to calculate the freezing point of a solution is:

Freezing point of pure solvent - Freezing point of solution = m . Kf . i

Let's replace data given. (i = Van't Hoff factor, numbers of ions dissolved in solution)

48.1°C - 44°C = 0.15 m . 9.78°C/m . i

4.1°C / (0.15 m . 9.78°C/m) = i

i = 2.79

In this case, numbers of ions dissolved can decrease the freezing point of a solution, which is always lower than pure solvent.

Answer:

1.51×10²³ atoms.

Explanation:

From the question given above, the following data were obtained:

Mass of Calcium (Ca = 10 g

Number of atom of Calcium (Ca) =?

The number of atoms present in 10 g of Ca be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole Ca contains 6.02×10²³ atoms.

1 mole of Ca = 40 g.

Now, if 40 g of Ca contains 6.02×10²³ atoms.

Therefore, 10 g of Ca will contain = (10 × 6.02×10²³) / 40 = 1.51×10²³ atoms.

Thus, 10 g of calcium contains 1.51×10²³ atoms.

Answer:

(a) 1s; has one orbital

(b) 4d; has five orbitals

(c) 3p; has three orbitals

(d) n=3 has nine orbitals

Explanation:

Electrons in an atom are always in constant motion, making it hard to predict there exact position. However, the most probable locations electrons can be be found are described with the terms shells, subshells and orbitals. A shell contains subshells and orbitals are found within subshells. The shells are given names such as K, L, M, N, which correspond to the principal quantum numbers, n = 1, 2, 3, and 4 respectively. There are 4 major types of subshells that can be found in a shell. They are named as s, p, d, f. Each subshell is composed of several orbitals.

a. 1s; the s subshell has only one orbital. Therefore, the 1s subshell has one orbital

b. 4d; the d subshell has five orbitals. Therefore, the 4d subshell has five orbitals

c. 3p; the p subshell has three orbitals. Therefore, the 3d subshell has  three orbitals

d. n = 3; the shell with n = 3 has the following subshells, 3s, 3p, 3d.the number of orbitals will be 1 + 3 + 5 = 9 orbitals. Therefore, the number of orbitals in n = 3 is nine orbitals

Answer:

the change in energy when one substance dissolves in another

Explanation:

The enthalpy changes are the heat changes accompanying physical and chemical changes. Actually, an enthalpy change is the difference between the sum of the heat contents of products (final state) and sum of the heat contents of reactants (initial state).

There are basically two types of heat changes that accompanies are reaction which are:

Therefore, the change in energy when one substance dissolves in another defines the enthalpy of solution.

Enthalpy of solution is the heat liberated or absorbed when one mole of a substance (solute) is dissolved in a specified volume of solvent (water).

Answer:

Partial pressures:

PCl₅ = 0.558 atm

PCl₃ = 0.22 atm

Cl₂ = 0.22 atm

Explanation:

From the given information:

The number of moles of PCl₅ associated with the evaporation is:

[tex]n_{PCl_5}= \dfrac {weight \ of \ PCl_5} {M.Wt. \ of \ PCl_5}[/tex]

[tex]n_{PCl_5}= \dfrac {2.69 \ g} {208.5 \ g/mol}[/tex]

[tex]n_{PCl_5}= 0.013 \ mol[/tex]

Temperature of the gas = 250° C = (250 + 273.15) K

= 523.15 K

Using the Ideal gas equation to determine the pressure exerted by the completely vaporized PCl₅

PV = nRT

[tex]P = \dfrac{nRT}{V}[/tex]

[tex]P = \dfrac{0.0013 \ mol \times 0.082 \ Latm^0 K^{-1} . mol ^{-1} \times 523.15 \ K}{1.0 \ L}[/tex]

P = 0.558 atm

Thus, at  250° C, decomposition of PCl₅ occurs.

In the container, PCl₅  decomposes to PCl₃ and Cl₂.

i.e.

[tex]PCl_{5(g)} \to PCl_{3(g)}+ Cl_{2(g)}[/tex]

Using Dalton's Law:

[tex]P_{total } =P_1 + P_2+P_3 +...[/tex]

[tex]P_1 = P_{Total} \times X_1[/tex]

where;

X = mole fraction

Then, the total no. of moles in the container is:

[tex]n = \dfrac{PV} {RT}[/tex]

[tex]n = \dfrac{1\ atm \times 1.0\ L}{0.0821 \ L \ atm \ K^{-1}.mol \times 523.15\ K}[/tex]

n = 0.023 mol

Now, the container contains a total amount of 0.023 mol where initially 0.013 mol are that of PCl₅ and remaining 0.005 mol of PCl₃ and 0.005 mol of Cl₂.

Thus, the partial pressure of  PCl₃  is:

[tex]P__{PCL_3} }= P_{total} \times \dfrac{no. \ of \ moles \ of PCl_5}{total \ no. \ of \ moles}[/tex]

[tex]P__{PCL_3}} = 1 \ atm \times \dfrac{0.005}{0.023}[/tex]

[tex]P__{PCL_3}} = 0.22 \ atm[/tex]

Thus, since the no of moles of PCl₃ and Cl₂ are the same, then the partial pressure for Cl₂ is = 0.22 atm

Answer:

The Law of Conservation of Mass states that mass is neither created nor destroyed in chemical reactions. Since the number and type of atoms in the reactant side of the chemical equation are the same as on the product side, the Law of Conservation of Mass has been demonstrated.

Explanation:

In the answer.

The two main postulates that was given by Antoine Lavoisier are, oxygen play an important role in combustion and the other is mass of the reactant and product is conserved. Therefore, the given image is a good model for the Law of Conservation of Mass.

According to Law of conservation of mass, mass can neither be created nor be destroyed. Mass can only be transformed from one form to another. The law of conservation of mass was given by Antoine Lavoisier.

Every reaction in nature follow the law given by Antoine Lavoisier that is mass is always conserved. Another postulated that was given by Antoine Lavoisier is the role of oxygen in combustion reaction. Combustion can not happen without presence of oxygen.

The  image is a good model for the Law of Conservation of Mass as number and type of atoms on the reactant side and  product side are the same.

Therefore, the given image is a good model for the Law of Conservation of Mass.

To know more about law of conservation of mass, here:

https://brainly.com/question/28711001

#SPJ2

Answer: Energy of reactants = 30, Energy of products = 10

Exothermic

Activation energy for forward reaction is 10.

Explanation:

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.

Energy of reactants = 30

Energy of products = 10

Thus as energy of the product < energy of the reactant, the reaction is exothermic.

Activation energy [tex](E_a)[/tex] is the extra energy that must be supplied to reactants in order to cross the energy barrier and thus convert to products.

[tex]E_a[/tex] for forward reaction is (40-30) = 10.

Answer: not 100% but maybe Visable Light...sorry if thats wrong

Explanation:

Thermal energy is the another name for infrared energy.

Infrared radiation is a type of radiant energy that is  not visible to human eyes but we can feel as heat energy.

Infrared radiation (IR), also known as thermal radiation. It is that band of energy in the electromagnetic radiation spectrum with wavelengths between 780 nm and 1 mm so we can conclude that thermal energy is the another name for infrared energy.

Learn more about radiation here: https://brainly.com/question/24524460

Answer:

6moles of Mg

Explanation:

The reaction expression is given as:

          BO₃   +    3Mg   →    3MgO    +    B

Given:

Number of moles of B produced  = 2 moles

Unknown:

Number of moles of Mg required  = ?

Solution:

  From the balanced reaction expression:

          1 mole of B is produced from 3 moles of Mg

          2 moles of B will be produced from 2 x 3  = 6moles of Mg

Answer:

Molecules along the surface of a liquid behave differently than those in the bulk liquid.

Cohesive forces attract the molecules of the liquid to one another.

Water forming a droplet as it falls from a faucet is a primary example of surface tension.

Explanation:

Surface tension is the force that stretches the liquid surface. This force acts normal to the surface. It is the downward force that acts on the surface of the liquids which is due to the cohesive forces of the liquids.

The water molecules are bonded by a strong hydrogen bond force which is between hydrogen atom and the electronegative oxygen atom. At the surface the water molecules are attracted strongly by other water molecules which lies below the surface and are stretched at the surface. Thus the water molecules at the surface acts differently than in the bulk liquid.

Mercury have a strong cohesive force than the water and have a higher surface tension force than the water.

Surface water acquires minimum surface area, hence acquiring spherical shape of water.

Answer:

Explanation:

a )

H₂O₂ (aq) + 2 Fe²⁺ (aq) + 2 H⁺  = 2H20 (l) + 2 Fe³⁺(aq)

Here oxidation number  of Fe is increasing from + 2 to + 3 so it is being oxidized . Hence H₂O₂ is acting as oxidizing agent here .

b )

5 H₂O₂ (aq) + 2 MnO₄⁻¹ (aq) + 6 H⁺ (aq) → 8 H20 (l) + 2 Mn⁺² (aq) + 5O₂ (g)

In this reaction,  oxidation number of Mn is reducing from + 7 to + 2 so it is being reduced . Here H₂O₂ is acting as reducing agent .

The question is incomplete, the complete question is;

A student prepared several aqueous sodium chloride (NaCl) solutions to observe boiling point elevation at various molal concentrations, however, several errors were made throughout the procedure. Determine whether these errors would cause the observed boiling point to be increased or decreased relative to the expected boiling point, based on the procedure, or have no effect on the experimental results.

* The flask is washed with water but not thoroughly dried before preparing the solution

* The mass of NaCl used to prepare the solution is 5.400 grams instead of 4.400 grams

* Some of the prepared solution splashes out of the flask prior to observation of the boiling point

* When making the salt solution, 55.0 milliliters of water is added instead of 50.0 milliliters

Answer:

The flask is washed with water but not thoroughly dried before preparing the solution  - decrease

The mass of NaCl used to prepare the solution is 5.400 grams instead of 4.400 grams

-increase

Some of the prepared solution splashes out of the flask prior to observation of the boiling point- have no effect

When making the salt solution, 55.0 milliliters of water is added instead of 50.0 milliliters- decrease

Explanation:

If the flask is washed but not dried, then the solution will be further diluted than expected. As a result of this further dilution, the observed boiling point will be less than the expected boiling point because the boiling point depends on the solution's concentration.

If more solute is added than expected, the concentration of the solution is increased and the boiling point also increases above the expected boiling point due to the increase in amount of solute present.

If some of the solution splashes out of the flask prior to boiling, the boiling point is not affected because the concentration of the solution was not altered. The boiling point only changes when the concentration of the solution is changed.

If 55 ml of water is added instead of 50 ml, the solution is now more dilute than expected thereby reducing the concentration of the solution and the boiling point. Remember that, as the concentration of the solution decreases, the boiling point decreases accordingly.

Answer:

Silver Lake Picnic Area, Or C

Explanation:

Answer:

e. I, At

Explanation:

Hello!

In this case, since the periodic trends of a series of elements belonging to the same group towards physical and chemical properties tend to be the same when closer in period, we notice that Mg and Al, Br and Kr and As and Br are close but in period, not in the same group; therefore e. I, At, iodine and astatine, are going to tend to exhibit the greatest similarity in their physical  and chemical properties.

Best regards!

Answer:

Explanation:

here's the answer hope it helps! :)

Answer:

Fluorine (F)

Explanation:

The poorest conductor of electricity from the given choices is fluorine. This is because fluorine is a non - metal.

Like other non - metals, fluorine does not conduct electricity.

Only metals are known to conduct electricity and heat readily.

Semi - metals like silicon will conduct electricity under specific condition.

The free mobile electrons in metals makes it easy for them propagate electricity

Answer:

0.41 atm

Explanation:

A reaction between liquid reactants takes place at 10.0 °C in a sealed, evacuated vessel with a measured volume of 5.0 L. Measurements show that the reaction produced 13. g of sulfur hexafluoride gas. Calculate the pressure of sulfur hexafluoride gas in the reaction vessel after the reaction. You may ignore the volume of the liquid reactants. Round your answer to 2 significant digits.

Step 1: Given data

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = 10.0 °C + 273.15 = 283.2 K

Step 3: Calculate the moles (n) of SF₆

The molar mass of SF₆ is 146.06 g/mol.

13. g × 1 mol/146.06 g = 0.089 mol

Step 4: Calculate the pressure (P) of SF₆

We will use the ideal gas equation.

P × V = n × R × T

P = n × R × T/V

P = 0.089 mol × (0.0821 atm.L/mol.K) × 283.2 K/5.0 L = 0.41 atm

Mass of sample : 1987.5 g≈1990 g

Given

12% mass of Lithium chlorate

Required

Mass of sample

Solution

%mass = (mass of solute/mass of solution) x 100%

mass of solute = mass of Lithium chlorate = 238.5 g

Input the value :

12/100(0.12) = 238.5 g : mass of solution

mass of solution =238.5 : 0.12

mass of solution = 1987.5≈1990 g

Answer: inside

Explanation:

Answer:

direct and indirect contact

Explanation:

if you touch a doorknob right after an infected person than you make be exposed to the disease.

Answer:

Explanation:

a )

Average reaction rate between 0 and 1500s

Time duration = 1500 s

moles reacted = .184 - .016 = .168 moles

Moles reacted per second = .168 / 1500

= 112 x 10⁻⁶ moles /s

b )

Average reaction rate between 200 and 1200s

Time duration = 1000 s

moles reacted = .129 - .019 = .11 moles

Moles reacted per second = .11 / 1000

= 110 x 10⁻⁶ moles /s

c )

the instantaneous rate of the reaction at t=800s

We shall assume that between 500 s and 1200 s , rate of reaction is uniform

rate between 500 and 1200

Time duration = 700 s

moles consumed = .069 - .019 = .05 moles

Rate of reaction = .05 / 700

= 71 .4 x 10⁻⁶ moles / s

This will also be instantaneous rate of reaction at t = 800 s .