Answer:
(I)W=18×10³ J
(ii) P=720W
Explanation:
30 Bricks = 1brick weight× 30 Bricks
30 Bricks= 12×30
=360N
Distance=50m
Time= 25s
1. Work done= Force× Distance
=360×50
= 18×10³ J
2. Power= Work done/ Time
18×10³/25
Power= 720W.
The boiling point of water is 1000 C at sea level. The boiling point of butane is -1.50C… If we leave liquid butane in a bowl on a table in a room where the temperature is 240C, butane will
A. evaporate.
B. condense.
C. freeze.
D. melt.
Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
Explanation:
A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.
For example, the boiling point of butane is -1.5 degree Celsius.
This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.
Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.
who is a meteorologist
Answer:
A meteorologist is a scientist that studies and examines Earth's atmosphere and its interactions with Earth's oceans, land, and biosphere.
Explanation:
Meteorologists use math and science to understand and predict changes in weather and climate.
PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.
Alkali metals generally become more / less dense going down the group.
The melting and boiling points of alkali metals increase / decrease down the group.
The softness of alkali metals increases / decreases going down the group.
The speed with which alkali metals react with oxygen increases / decreases going
down the group.
Answer:
Densities increase down the group
MP and BP decrease down the group
Softness increased going down the group
Speed of reacting increases going down the group
The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.
What is the S.I Unit of electric flux?
Answer:
Volt metre (Vm)
or Newton/Coulomb x (Metre)^2 (N/C x m^2)
3) Ęplain why muddy water is
Heterogeneous
mixture
Answer:
muddy water is a heterogeneous mixture, which is Suspension.
What observation related to spectral lines from distant galaxies provides
evidence for the big bang theory?
A. They appear just as they do on Earth.
B. They are shifted toward the blue end of the spectrum.
C. They fail to shift into the ultraviolet region.
O 0
D. They are shifted toward the red end of the spectrum.
They are shifted toward the red end of the spectrum.
A basketball is shot by a player at a height of 2.0m. The initial angle was 53° above the horizontal. At the highest point, the ball was travelling 6 m/s. If he scored (the ball went through the rim that is 3.00m above the ground), what was the player's horizontal distance from the basket?
At the ball's highest point, it has no vertical velocity, so the 6 m/s is purely horizontal. A projectile's horizontal velocity does not change, which means the ball was initially thrown with speed v such that
v cos(53°) = 6 m/s ==> v = (6 m/s) sec(53°) ≈ 9.97 m/s
The player shoots the ball from a height of 2.0 m, so that the ball's horizontal and vertical positions, respectively x and y, at time t are
x = (9.97 m/s) cos(53°) t = (6 m/s) t
y = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²
Find the times t for which the ball reaches a height of 3.00 m:
3.00 m = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²
==> t ≈ 0.137 s or t ≈ 1.49 s
The second time is the one we care about, because it's the one for which the ball would be falling into the basket.
Now find the distance x traveled by the ball after this time:
x = (6 m/s) (1.49 s) ≈ 8.93 m
Which unit is equivalent to J/s?
O A. Meters
O B. Watts
O C. Newtons
O D. Calories
B. Watts
Then j/s is the rate of transferring energy or doing work. Its unit is the Watt, equivalent to 1 Joule per second.
A hydraulic jack is used to lift a car by applying a force of 120 N at the pump piston.
If the area of the ram and pump piston are 100 cm2 and 1m2 respectively:
(i)Calculate the force that is applied to the ram.
Answer:
I don't know.. sorry
Explanation:
help u next time
¿Cuánto se demora el sonido en recorrer 3 metros de un cable de cobre, si su rapidez en él es de 3810 m/s
Answer:
1270 segundos
Explanation:
Dada,
Velocidad ( v ) = 3810 m/s
Distancia ( s ) = 3 m
Encontrar : -
Tiempo que tarda el sonido en viajar ( t ) = ?
Fórmula : -
s = d / t
t = d / s
= 3810 / 3
t = 1270 segundos
. Una varilla de cobre de coeficiente de dilatación 1,4*10-5 °C -1 , tiene una longitud de 1.20 metros a una temperatura ambiente de 18 ˚C . ¿Cuál sera su longitud 100 ˚C
Answer:
La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.
Explanation:
Asumiendo que la varilla de cobre experimenta deformaciones muy pequeñas y que las deformaciones no longitudinales son despreciables con respecto a las deformaciones longitudinales, la deformación longitudinal de la varilla se estima mediante la siguiente fórmula:
[tex]l_{f} = l_{o}\cdot [1+\alpha \cdot (T_{f}-T_{o})][/tex] (1)
Donde:
[tex]l_{o}[/tex] - Longitud inicial de la varilla, en metros.
[tex]\alpha[/tex] - Coeficiente de dilatación, en [tex]^{\circ}C^{-1}[/tex].
[tex]T_{o}[/tex] - Temperatura inicial de la varilla, en grados Celsius.
[tex]T_{f}[/tex] - Temperatura final de la varilla, en grados Celsius.
Si sabemos que [tex]l_{o} = 1.20\,m[/tex], [tex]\alpha = 1.4\times 10^{-5}\,^{\circ}C^{-1}[/tex], [tex]T_{o} = 18\,^{\circ}C[/tex] y [tex]T_{f} = 100\,^{\circ}C[/tex], entonces la longitud final de la varilla es:
[tex]l_{f} = (1.20\,m)\cdot \left[1 + \left(1.4\times 10^{-5}\,^{\circ}C^{-1}\right)\cdot (100\,^{\circ}C-18\,^{\circ}C)\right][/tex]
[tex]l_{f} = 1.201\,m[/tex]
La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.
when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2
Answer:
f=ma.......m=f/a......m=20kg
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
Complete Question
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
(a) u = 0 heavier block m/s2 m/s2 lighter block
(b)M = 0.035 heavier block m/s2 m/s2 lighter block
Answer:
a) [tex]A_h=0.297[/tex]
[tex]A_l=-0.59475[/tex]
b) [tex]a=0[/tex]
[tex]a=-0.25175m/s^2[/tex]
Explanation:
From the question we are told that:
Force constant [tex]k=3.05N/m[/tex]
Compression Length [tex]l_c=7.80cm=0.07m[/tex]
Left Mass [tex]M_l=0.400kg[/tex]
Right Mass [tex]M_r=0.800kg[/tex]
Coefficient of kinetic friction [tex]\mu=0, 0.035, and\ 0.397.[/tex]
Therefore
Spring force is given as
[tex]F_s=Kx[/tex]
[tex]F_s=3.05*0.070[/tex]
[tex]F_s=0.238N[/tex]
Generally the equation for Acceleration is mathematically given by
[tex]A=\frac{F}{m}[/tex]
For Heavier block
[tex]A_h=\frac{F_s}{m_r}[/tex]
[tex]A_h=\frac{0.238N}{0.8}[/tex]
[tex]A_h=0.297[/tex]
For Lighter blocks
[tex]A_l=\frac{F_s}{m_r}[/tex]
[tex]A_l=\frac{-0.238N}{0.4}[/tex]
[tex]A_l=-0.59475[/tex]
b)
Generally the equation for Force is mathematically given by
[tex]F_s-F=ma[/tex]
For Heavier block
[tex]F>Fs[/tex]
Therefore
[tex]a=0[/tex]
For Lighter blocks
[tex]F-F_s=ma[/tex]
[tex](0.035)(0.4)(9.8)-(0.2379)=(0.4)a[/tex]
[tex]a=-0.25175m/s^2[/tex]
What is the energy of an electromagnetic wave that has a frequency of
4.0 x 109 Hz? Use the equation E = hf, where h = 6.626 x 10-34 J·s.
Answer:
[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]
Explanation:
Given the following data;
Frequency = 4.0 x 10⁹ Hz
Planck's constant, h = 6.626 x 10-34 J·s.
To find the energy of the electromagnetic wave;
Mathematically, the energy of an electromagnetic wave is given by the formula;
E = hf
Where;
E is the energy possessed by a wave.
h represents Planck's constant.
f is the frequency of a wave.
Substituting the values into the formula, we have;
[tex] Energy, \; E = 4.0 x 10^{9} * 6.626 x 10^{-34} [/tex]
[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]
Question 8 of 16
A book with a mass of 1.8 kg sits on a bookshelf. If it has a gravitational
potential energy of 42 J, how high is the shelf? The acceleration of gravity is
9.8 m/s2
A. 2.1 m
B. 0.9 m
C. 1.6 m
D. 2.4 m
SUBMIT
Answer:
Explanation:
PE = mgh where m is the mass, g is gravity, and h is the height from which the object can potentially fall. We are given enough info here to solve for h. Filling in:
42 = 1.8(9.8)h and
[tex]h=\frac{42}{(1.8)(9.8)}[/tex] and rounding to 2 sig fig's as we need:
h = 2.4 m, choice D
An airplane starts from rest and undergoes a uniform acceleration of 8.1 m/s2 for 19.4 s seconds before leaving the ground. What is its displacement?
Answer:
GIVEN:
v₀=0ms⁻¹
a= 8.1ms⁻²
t= 19.4s
REQUIRE:
d=?
CALCULATUION:
as we know,
d=v₀t+1/2at²
by putting values
d=0ms⁻¹×19.4s+1/2×8.1ms⁻²×(19.4s)²
d=0m+1/2×8.1ms⁻²×376.36s²
d=1/2×3048.516m
d=1524.258m
d≈1524m
Question 1 of 10
Through which process is fertile soil renewed?
A. Reproduction
B. The water cycle
C. Precipitation
D. Nutrient cycling
SUBMIT
Answer:
soil fertility...
Explanation:
none of these answers.. really go with that that question the best choice and real answer to your question is soil fertility
Answer: D.Nutrient cycling
A solution has a pH of 8. Which best describes the solution?
a strong acid
a strong base
a weak acid
a weak base
Answer:
D
Explanation:
a weak base is the answer
Answer:
weak base because its near to 7 (neutral) and above 7 is base
A distressed car is rolling backward, downhill at 3.0 m/s when its driver finally manages to
get the engine started. What velocity will the car have 6.0 s later if it can accelerate at
3.0 m/s??
Answer:
Explanation:
Acceleration is equal to the change in velocity over the change in time, or
[tex]a=\frac{v_f-v_i}{t}[/tex] where the change in velocity is final velocity minus initial velocity. Filling in:
[tex]3.0=\frac{v_f-(-3.0)}{6.0}[/tex] Note that I made the backward velocity negative so the forward velocity in our answer will be positive.
Simplifying that gives us:
[tex]3.0=\frac{v_f+3.0}{6.0}[/tex] and then isolating the final velocity, our unknown:
3.0(6.0) = v + 3.0 and
3.0(6.0) - 3.0 = v and
18 - 3.0 = v so
15 m/s = v and because this answer is positive, that means that the car is no longer rolling backwards (which was negative) but is now moving forward.
. When 2 moles of helium gas expand at constant pressure P = 1.0 × 105 Pascals, the temperature increases from 2℃ to 112℃. If the initial volume of the gas was 45 liters. Cp=20.8J/mol.K, Cv=12.6J/mol.K. Determine i. The work done W by the gas as it expands (4) ii. The total heat applied to the gas (2) iii. The change in internal energy (2
Answer:
i. Work done by the gas as it expands is approximately 1,900 J
ii. The total heat supplied is approximately 4, 576 J
iii. The change in internal energy is approximately 2,772 J
Explanation:
The constant pressure of the helium gas, P = 1.0 × 10⁵ Pa
The initial and final pressure of the gas, T₁, and T₂ = 2°C (275.15 K) and 112°C (385.15 K) respectively
The number of moles of helium in the sample of helium gas, n = 2 moles
The volume occupied by the gas at state 1, V₁ = 45 L
i. By ideal gas law, we have;
P·V = n·R·T
Therefore;
[tex]V = \dfrac{n \cdot R \cdot T}{P}[/tex]
Plugging in the values gives;
[tex]V_2 = \dfrac{n \cdot R \cdot T_2}{P}[/tex]
Where;
V₂ = The volume of the gas at state 2
Therefore;
[tex]V_2 = \dfrac{2 \cdot 8.314 \cdot 385.15}{1.0 \times 10^5} \approx 0.064[/tex]
The volume of the gas at state 2, V₂ ≈ 0.064 m³ = 64 Liters
Work done by the gas as it expands, W = P × (V₂ - V₁)
∴ W ≈ 1.0 × 10⁵ Pa × (64 L - 45 L) = 1,900 J
Work done by the gas as it expands, W ≈ 1,900 J
ii. The total heat supplied, Q = Cp·n·ΔT
∴ Q = 20.8 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 4,576 J
The total heat supplied, Q = 4, 576 J
iii. The change in internal energy, ΔU = Cv·n·ΔT
∴ ΔU = 12.6 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 2,772 J
The change in internal energy, ΔU = 2,772 J
The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)
Answer:
2000g
Explanation:
volume=mass/density
=2000/2.5
=800cm³
mass=density×volume
=800×2.5
=2000g
Which labels are correct for the regions marked? a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium b. X: Faster in gases than liquids Y: Slowest in solids Z: Faster in liquids than gases c. X: Slower in solids than liquids Y: Velocity depends on medium Z: Faster in liquids than gases d. X: Velocity depends on medium Y: Fastest in gases Z: Slower in liquids than solids
Answer:
a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.
Explanation:
Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through. In more rigid medium sounds velocity will be faster.
22) How is it possible to fill medicine in a syringe?explain
I hope this helps you ^-^
please answer quick for brainlist ; )
Answer:
The diagram assigned B
explanation:
Check the direction of the two vectors, their resultant must be in the same direction.
Please help me with this...
And write all steps..
Answer:
[tex]2\frac{m}{s^2} =a[/tex]Explanation:
Use the kinematic equation.
[tex]v_{2} =v_{1} +at[/tex]This equation can be derived from [tex]f=ma[/tex], but we can just memorize, or look them up when needed as it saves us time.
Now we can plug our measurements into each variable to solve for acceleration.
[tex]18\frac{m}{s} =8\frac{m}{s} +a*5s[/tex]Subtract 8m/s from both sides.
[tex]10\frac{m}{s} =a*5s[/tex]Divide by 5 seconds. Left with acceleration in terms of [tex]\frac{m}{s^2}[/tex]
[tex]2\frac{m}{s^2} =a[/tex]A policeman kicks in a door with a force of 4500 N. What force does the door apply to the policeman’s leg?
Answer:
-4500 N
Source: Brainly
The police officer must be angry 0_0
Please help me with the following question:
Calculate the weight of a 68.0 kg person:
a) on the surface of the earth
b) at the top of Everest (8848 m above sea level).
c) has 2 1/2 times the radius of the earth
Thank you in advance :)
Answer: a. 667N
b. 665N
c. 54.5N
Explanation:
a) on the surface of the earth
W = mg
W = 68 × 9.81
= 667N
b) at the top of Everest (8848 m above sea level).
W =mg × R²/(R + H)²
W = 667 × [6378²/(6378 + 8.848)²
W = 665N
c) has 2 1/2 times the radius of the earth
W = mg × R²/(R + H)²
W = 667 × R²/(R + 2.5R)²
W = 54.5N
an image of a statue appears to be 11.5cm behind convex mirror with focal length 13.5cm. Find the distance from the statue to the mirror
Answer:
77.625 cm
Explanation:
The given distance of the image behind the convex mirror, v = 11.5 cm
The focal length of the mirror, f = 13.5 cm
The mirror formula for convex mirror is given as follows;
[tex]\dfrac{1}{u} - \dfrac{1}{v} = -\dfrac{1}{f}[/tex]
Where;
u = The distance from the statue to the mirror
Therefore, we get;
[tex]\dfrac{1}{u} = -\dfrac{1}{f} + \dfrac{1}{v}[/tex]
Plugging in the values gives;
[tex]\dfrac{1}{u} = -\dfrac{1}{13.5} + \dfrac{1}{11.5} = \dfrac{8}{621}[/tex]
∴ The distance from the statue to the mirror, u = 621/8 cm = 77.625 cm.
HELPPPPPPPPPPP PLEASEEEEEEEEEEE
Complete this sentence. The solubility of a sample will ____________ when the size of the sample increases.
stay the same
decrease
increase
be unable to be determined
the answer is not decrease
The solubility of the sample will decrease
