Answer:
Explanation:
A plane mirror is the kind you look into when you look into a "regular" mirror. The image you see is right-side-up. These images are virtual. Real images are always upside down and are made by mirrors that are "parabolic" in shape. Virtual images are always right-side-up.
I NEED HELP ASAP!!!
What is the average speed shown on the graph between point A and point D?
Answer:
5/3 m/s or
6 km/h
Explanation:
really ? the average speed is just the straight connection in the graph from A to D.
that means the travel time was 40-10 seconds = 30 seconds.
and the distance traveled was 60-10 = 50 meters.
so, the average speed was
50 meters / 30 seconds
to bring this to standard m/s
5 m / 3 s = 5/3 m/s
or to standard km/h
an hour has 60 minutes or 120 30-seconds intervals
50 m/ 30 s × 120/120 = 6000 m / h = 6 km/h
A bus travelled 160 km in 4 hours, another bus travelled 175 km in 5 hours, which bus moved faster?
[tex]\boxed{\sf Speed=\dfrac{Distance}{Time}}[/tex]
For 1st bus:-Distance=160kmTime=4h[tex]\\ \sf\longmapsto Speed=\dfrac{160}{4}[/tex]
[tex]\\ \sf\longmapsto Speed=40km/h[/tex]
For 2nd busDistance=175kmTime=5h[tex]\\ \sf\longmapsto Speed=\dfrac{175}{5}[/tex]
[tex]\\ \sf\longmapsto Speed=35km/h[/tex]
Bus 1moved faster
The mass of earth 6*10^24kg and radius is 400kg Now find the value of acceleration due to gravity when a object is 3600km from the earth surface
any correct ans guess for 30 pts and brainlist
Answer:
a) ii
b) i
c)iii
d)iii
e) i
f)iii
Explanation:
i hope this will help
Answer:
the answer of b is N and d is mol
Quien fue el físico platon
Answer:
Platón se cree que nació entre los años 428-427 a.C. en Atenas o Egina. Murió en Atenas sobre el año 347 a.C. Filósofo griego, Platón fue discípulo de Sócrates y maestro de Aristóteles. Fue, además, el fundador de la escuela filosófica La Academia de Atenas.
why audiotape, credit cards and videotape not placed closed to a strong magnet
Answer:
There are many possible causes of magnetic defects in credit cards. But there are two direct causes: 1. Close to a strong magnet 2. Damage from scratches or wear Even if used properly it can cause magnetic defects. But if used incorrectly, it can cause an immediate relapse. If you have never used a credit card due to magnetic defects, check what will cause magnetic defects and for example credit cardMagnetic stripe cards, such as credit cards and cash cards, are more likely to cause magnetic field defects if brought near magnetically generating objects such as magnets. Although exposure to strong magnets does not necessarily lead to failure. However, it should be kept away from objects that may cause magnetic field defects.
Explanation:
Magnetic fields can erase or distort the data stored on these items. The correct option is A.
Magnetic media are used to store information in a magnetic format on audiotapes, credit cards, and videotapes. They may have their magnetic patterns and particle alignment disturbed if they are placed close to a powerful magnet.
The stored data may be lost or damaged as a result. For instance, credit cards' magnetic stripes may become illegible, audiotapes may lose their sound quality or possibly be completely erased, and videotapes may have distorted or scrambled imagery and audio.
To preserve the accuracy and utility of the data they contain, it is crucial to keep these things away from strong magnetic fields.
Thus, the correct option is A.
For more details regarding magnetic field, visit:
https://brainly.com/question/14848188
#SPJ5
Your question seems incomplete, the probable complete question is:
Why audiotape, credit cards and videotape not placed closed to a strong magnet
A. Magnetic fields can erase or distort the data stored on these items.
B. Magnetic fields can cause these items to become permanently demagnetized.
C. Magnetic fields can cause these items to generate excess heat and potentially catch fire.
D. Magnetic fields can cause these items to emit harmful radiation.
(Q008) Magnetic anomalies are a. found only on the seafloor. b. measured with an instrument called an inclinometer. c. defined as the angle between which a compass needle points and the longitude at that point. d. places where the magnetic field strength is either greater or less than the expected strength.
Answer: D. places where the magnetic field strength is either greater or less than the expected strength.
Explanation:
Magnetic anomaly refers to the change in the magnitude of the magnetic field of the Eatth with respect to the location's expected value.
Magnetic anomalies are places where the magnetic field strength is either greater or less than the expected strength. Therefore, the correct option is D.
The direction of applied force has to be .............. to the distance in order to say work is done
Answer:
Parallel
Explanation:
The work done is defined as the force applied on an object and the displacement in the position of the object in the direction of force.
W = F s cos A
where, F is the force, s is the displacement and A is the angle between force and displacement.
When the angle between the force and the displacement is 90 degree, the work done is zero.
To get the maximum work the angle between the force and the displacement is 0 degree.
So, to get the work done by the force the angle between the force and displacement is 0 degree that means the force and displacement is parallel to each other.
10 solve the following humeric problem - S. a What is the lift height of salu? T. object energy required to 25 kg to mass of a 10 m.
[tex]\boxed{\sf E_P=mgh}[/tex]
[tex]\\ \sf\longmapsto E_P=25(10)(10)[/tex]
[tex]\\ \sf\longmapsto E_P=25(100)[/tex]
[tex]\\ \sf\longmapsto E_P=2500J[/tex]
3) All numbers that are divisible by both 3 and 5 are also divisible by 10. Which of the following numbers can be used to show that the statement above is FALSE? (A) 20 (B) 25 (C) 30 (D) 40 (E) 45
Answer:
answer E
Explanation:
cuz its 45 is divisible by 3 and 5 but not 10
What is the relation between the weight of a body and acceleraton due to gravity?
Answer:
All objects on Earth, regardless of their mass, accelerate due to gravity at the same rate - that is, 9.8 m/sec2. The weight of an object can be calculated using the formula for force - F = m * a - where F equals the weight of the object and now the acceleration (a) is the acceleration of gravity (g).
Which of the following is a contact force?
A. applied
B. electromagnetic
C. nuclear
D. gravity
applied force is a contact force
Our Moon a. was a separate small planet before it was captured by the Earth's gravity. b. spun off the fast-spinning Earth during the early formation of the Solar System. c. coalesced from gas and dust in its current place next to the Earth. d. was formed by the collision of the Earth with a Mars-sized protoplanet.
Answer:
d. was formed by the collision of the Earth with a Mars-sized protoplanet.
According to the The giant-impact hypothesis the Moon was formed from the debris of a collision between the Earth and a Mars-sized protoplanet.
How can you distinguish wave motion and particle motion?
Answer:
The particle is defined as the small quantity of matter under the consideration. ... The wave is defined as the propagating dynamic distrubance. The energy of the wave is calculated based on the wavelength and velocity
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY :)Explanation:
In Physics, we distinguish between wave motion and particle motion. Wave motion refers to the movement of a wave-like pattern from one location on the medium to another. ... When you observe the motion of these points, you are observing particle motion - the motion of particles of the rope.
2. A person jogs 4.0 km in 32 minutes, then 2.0 km in 22 minutes, and finally 1.0 km in 16 minutes.
What is the jogger's average speed in km per minute?
Answer:
0.1 km/min
Explanation:
7 / 70 = 0.1km/min
the atomic number of phosphorus is
Answer:
The atomic number of phosphorus is 15.
Explanation:
It’s found after Si(Silicon) and before S(sulphur)
Non-ideal behavior for a gas is most likely to be observed under conditions of a) high pressure and low temperature. b) high temperature and high pressure. c) high temperature and low pressure. d) standard temperature and pressure. e) low temperature and low pressure.
Answer:
high temperature and low pressure
Explanation:
Real gases have intermolecular forces of attraction between them hence they can be liquified. However, gases approach ideal behavior at high temperature and low pressure.
According to the kinetic theory of gases, gases molecules move at incredibly high speeds and exhibit no intermolecular interaction because the gas molecules are isolated from each other.
At high temperature and low pressure, gas molecules are found to possess maximum kinetic energy. They move with a very high velocity and have minimal intermolecular interaction between them in accordance with the proposition of the kinetic theory of gases.
If star A is 20 light years away from earth and star B is 40 light years away from earth,which star appears brighter and by what factor?
Answer:
Because Star A and Star B have identical luminosities, the difference in their apparent brightness is due solely to distance. Star B is twice as far from Earth as Star A.
Explanation:
What is meant by the term wave front?
Explanation:
Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.
a man does 1500 J of work to pull a box of 150 N. what is the displacement of the box?
We know
[tex]\boxed{\sf Work\:Done=Force\times Displacement}[/tex]
[tex]\\ \sf\longmapsto 1500=150\times Displacement[/tex]
[tex]\\ \sf\longmapsto Displacement=\dfrac{1500}{150}[/tex]
[tex]\\ \sf\longmapsto Displacement=10m[/tex]
A ball is thrown vertically upward.It's velocity at the highest point is?
A. 10 ms^-1
B. Zero
C. 10 ms^-2
D. None of these
B
Explanation:
BECAUSE IT WAS GOING UPWORD THEN IT'S VELOCITY WAS DECREASING -10MS¹
Answer:
Explanation:
From physics, which is directly related to math (especially when it comes to parabolic motion!), we learn that at the very top of the parabola the object has to stop for a millisecond so it can turn around and fall back to earth. This translates to a velocity of 0 at its highest point. So B.
why does balloon pop in the sun?
Answer:
The heat gives atoms/ particles in balloon more kinetic energy so they move further apart, increasing size and eventually popping balloon
^ very simple explanation
Explanation:
D=12000 m
T= 30min
V=?
Ayudenme en este ejercicio xfa
En m/min y en Km/h
any person for the job he applied Force moment or torque
Answer:
i think torque is the answer not confirmed
# Astronaut fells weightlessness in a spacecraft why?
Answer:
......... ........ ... .... .... . .. .......
.....
Explanation:
........mmmmmmmmmmm
1. explain the procedure undertaken if you have to measure the density of the contents of a milk carton. 2. two objects have the same mass. How about the density of the two objects?
To calculate the density of a substance, its mass and volume has to be determined. So that:
i. For the milk in the carton, its mass and volume should be known.
ii. For the two objects given in the question, their individual masses and volumes have to be determined.
Density of a substance (ρ) is the rate of the mass (m) of the substance to its volume (V). It is measure in kg/[tex]m^{3}[/tex].
i.e ρ = [tex]\frac{m}{V}[/tex]
The density of a substance can be determined once the mass and its volume have been accurately measured.
1. How to measure the density of the contents of a milk carton.
a. Determine the mass of the milk carton with its content.
b. Determine the mass of the milk carton when empty.
c. Subtract the mass of the milk carton when empty from the mass of the carton with its content. This will give the mass of the milk in the carton.
d. Using a beaker, measure the volume of the milk.
e. Divide the mass of the milk by its volume to determine its density.
2. How to measure the densities of two objects of equal mass.
a. Fill an Eureka's can or a beaker with sprout with water to its brim.
b. Slowly drop the mass into the beaker with water so as to collect the volume of the liquid displaced into another beaker.
c. The volume of the liquid displaced is the volume of the mass.
d. Divide the mass of the object by its volume to determine its density.
NB: These procedures are observed to determine the densities of the two object individually.
For more explanations, visit: https://brainly.com/question/17924956
why does a stone sink and a ship float
Answer:
A stone is more dense than water and the air in draft of the boat is less dense than water.
is there any machine that is 100% efficient? why?why not
Answer:
No, it's not there.
Explanation:
For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.
Is velocity ratio of a machine affected by applying oil on it? Explain with reasons.
Answer:
when it comes to machines being Rusty oil is like the root loosener
differniate between Magnetic force and electrostatic force
Answer:
magnetic force:
i) It is exerted by a magnet.
ii)Magnetic forces are always normal to the direction of the velocity of the charge it acts upon.
Electrostatic force
i) It is exerted by electrically charged body.
ii)Electric force are independent of the direction the charge moves in.
✌✌✌✌
