Answer:
The correct answer is 500 N
Explanation:
This is an exercise in Newton's third law or law of action and reaction
The Earth exerts a force on the person, which we call a weight of 500 N directed downwards, we can call this action and the person exerts a force on the Earth of equal magnitude 500N and in the opposite direction, that is directed upwards.
Which force we call action does not matter, the analysis and conclusions are the same
The correct answer is 500N
A rigid uniform bar of length L and mass m is suspended by a massless wire AC and a rigid massless link BC. Determine the tension in BC immediately after AC breaks.
Answer:
hello the needed diagram is missing attached below is the diagram and the detailed solution
The tension in BC = [tex]\frac{\sqrt{2} }{4} mg[/tex]
Explanation:
ATTACHED BELOW IS THE DETAILED SOLUTION T THE GIVEN PROBLEM
Ma = mg - T/ [tex]\sqrt{2}[/tex] equation 1
Ma = 3T / [tex]\sqrt{2}[/tex] equation 2
equate both equations to determine the tension on BC
An electric device delivers a current of 5.0 A to a circuit. How many electrons flow through this circuit in 5 s?
Answer:
1.6×10²⁰
Explanation:
An ampere is a Coulomb per second.
1 A = 1 C / s
The amount of charge after 5 seconds is:
5.0 A × 5 s = 25 C
The number of electrons is:
25 C × (1 electron / 1.6×10⁻¹⁹ C) = 1.6×10²⁰ electrons
A loop of wire in the shape of a rectangle rotates with a frequency of 143 rotation per minute in an applied magnetic field of magnitude 2 T. Assume the magnetic field is uniform. The area of the loop is A = 2 cm2 and the total resistance in the circuit is 7 Ω.
1. Find the maximum induced emf.
e m fmax =
2. Find the maximum current through the bulb.
Imax
Answer:
1. e m fmax = 0.00598 Volt
2. Imax = 0.000854 Amp
Explanation:
1. Find the maximum induced emf.
e m fmax =
Given that e m fmax = N*A*B*w
N = 1
A = 2 cm^2 = 0.0002 m^2
f = 143 rotation per minute = 143/min
f = (143/min) * (1 min/60 sec) = 2.38/sec
w = 2Πf = 2 * Π * 2.38 = 14.95 rad/sec
B = 2T
e m fmax = N*A*B*w
e m fmax = 1 * 0.0002 * 2 * 14.95
e m fmax = 0.00598 Volt.
2. Find the maximum current through the bulb.
Imax = e m fmax / R
Where R is the total resistance in the circuit is 7 Ω.
Imax = 0.00598/7 = 0.000854 Amp.
Imax = 0.000854 Amp
1) The maximum induced EMF in the loop of wire is; EMF_max = 9.52 × 10^(-4) V
2) The maximum current through the bulb is;
I_max = 1.36 × 10^(-4) A
We are given;
Number of turns; N = 1
Magnitude of magnetic field; B = 2 T
Area; A = 2 cm² = 0.0002 m²
Angular frequency; ω = 143 /min = 2.38 /s
Resistance; R = 7 Ω.
1) Formula for maximum induced EMF is;
EMF_max = NAωB
Plugging in the relevant values gives;
EMF_max = 1 × 0.0002 × 2.38 × 2
EMF_max = 9.52 × 10^(-4) V
2) Formula for maximum current through the bulb is given as;
I_max = EMF_max/R
Plugging in the relevant values;
I_max = (9.52 × 10^(-4))/7
I_max = 1.36 × 10^(-4) A
Read more at; https://brainly.com/question/24487261
A plane monochromatic light wave is incident on a double slit as illustrated in Figure 37.1.
(i) As the viewing screen is moved away from the double slit, what happens to the separation between the interference fringes on the screen?
(a) It increases,
(b) It decreases,
(c) It remains the same,
(d) It may increase or decrease, depending on the wavelength of the light.
(e) More information is required,
(ii) As the slit separation increases, what happens to the separation between the interference fringes on the screen? Select from the same choices.
Explanation:
The separation between the interference fringes on the screen increases because the distance of the screen from the slit is increased. Therefore option (a) is correct.
The separation between the interference fringes on the screen increases because the distance of the screen from the slit is increased, which is contradictory. Therefore option (b) is incorrect.
The separation between the interference fringes on the screen increases because the distance of the screen from the slit is increased, which is contradictory. Therefore option (c) is incorrect.
The separation between the interference fringes on the screen increases because the distance of the screen from the slit is increased, which is contradictory. Therefore option (d) is incorrect.
The separation between the interference fringes on the screen increases because the distance of the screen from the slit is increased, which is contradictory. Therefore option (e) is incorrect.
In a double-slit experiment, light from two monochromatic light sources passes through the same double slit. The light from the first light source has a wavelength of 587 nm. Two different interference patterns are observed. If the 10th order bright fringe from the first light source coincides with the 11th order bright fringe from the second light source, what is the wavelength of the light coming from the second monochromatic light source?
Answer:
The wavelength is [tex]\lambda_2 = 534 *10^{-9} \ m[/tex]
Explanation:
From the question we are told that
The wavelength of the first light is [tex]\lambda _ 1 = 587 \ nm[/tex]
The order of the first light that is being considered is [tex]m_1 = 10[/tex]
The order of the second light that is being considered is [tex]m_2 = 11[/tex]
Generally the distance between the fringes for the first light is mathematically represented as
[tex]y_1 = \frac{ m_1 * \lambda_1 * D}{d}[/tex]
Here D is the distance from the screen
and d is the distance of separation of the slit.
For the second light the distance between the fringes is mathematically represented as
[tex]y_2 = \frac{ m_2 * \lambda_2 * D}{d}[/tex]
Now given that both of the light are passed through the same double slit
[tex]\frac{y_1}{y_2} = \frac{\frac{m_1 * \lambda_1 * D}{d} }{\frac{m_2 * \lambda_2 * D}{d} } = 1[/tex]
=> [tex]\frac{ m_1 * \lambda _1 }{ m_2 * \lambda_2} = 1[/tex]
=> [tex]\lambda_2 = \frac{m_1 * \lambda_1}{m_2}[/tex]
=> [tex]\lambda_2 = \frac{10 * 587 *10^{-9}}{11}[/tex]
=> [tex]\lambda_2 = 534 *10^{-9} \ m[/tex]
A single slit is illuminated by light of wavelengths λa and λb, chosen so that the first diffraction minimum of the λa component coincides with the second minimum of the λb component. (a) If λb = 350 nm, what is λa? For what order number mb (if any) does a minimum of the λb component coincide with the minimum of the λa component in the order number
Answer:
λ_A = 700 nm , m_B = m_a 2
Explanation:
The expression that describes the diffraction phenomenon is
a sin θ = m λ
where a is the width of the slit, lam the wavelength and m an integer that writes the order of diffraction
a) They tell us that now lal_ A m = 1
a sin θ = λ_A
coincidentally_be m = 2
a sin θ = m λ_b
as the two match we can match
λ _A = 2 λ _B
λ_A = 2 350 nm
λ_A = 700 nm
b)
For lam_B
a sin λ_A = m_B λ_B
For lam_A
a sin θ_A = m_ λ_ A
to match they must have the same angle, so we can equal
m_B λ_B = m_A λ_A
m_B = m_A λ_A / λ_B
m_b = m_a 700/350
m_B = m_a 2
A bug on the surface of a pond is observed to move up and down a total vertical distance of 6.5 cm , from the lowest to the highest point, as a wave passes. If the ripples decreaseto 4.7 cm, by what factor does thebug's maximum KE change?
Answer:
factor that bug maximum KE change is 0.52284
Explanation:
given data
vertical distance = 6.5 cm
ripples decrease to = 4.7 cm
solution
We apply here formula for the KE of particle that executes the simple harmonic motion that is express as
KE = (0.5) × m × A² × ω² .................1
and kinetic energy is directly proportional to square of the amplitude.
so
[tex]\frac{KE2}{KE1} = \frac{A2^2}{A1^2}[/tex] .............2
[tex]\frac{KE2}{KE1} = \frac{4.7^2}{6.5^2}[/tex]
[tex]\frac{KE2}{KE1}[/tex] = 0.52284
so factor that bug maximum KE change is 0.52284
The factor does the bug's maximum KE change should be considered as the 0.52284.
Calculation of the factor:Since
vertical distance = 6.5 cm
ripples decrease to = 4.7 cm
So here we apply the given formula
KE = (0.5) × m × A² × ω² .................1
here,
kinetic energy is directly proportional to square of the amplitude.
So,
= 4.7^2/ 6.5^2
= 0.52284
hence, The factor does the bug's maximum KE change should be considered as the 0.52284.
Learn more about distance here: https://brainly.com/question/17802937
which is example of radiation
Answer:
Ultraviolet light from the sun.
Explanation:
This is an example of radiation.
Answer:
X-Ray
Explanation:
x-Ray is an example of radiation.
A parallel-plate capacitor consists of two square plates, size L×L, separated by distance d. The plates are given charge ±Q . What is the ratio Ef/Ei of the final electric field strength Ef to the initial electric field strength Ei if:
a. Q is doubled?
b. L is doubled?
c. d is doubled?
Answer:
Using
A. .E = σ/εo = (q/A)/εo = = q/Aεo so if q = 2q, then
Ef/Ei = 2
B. If L is 2L then Ef = q/4Aεo and
Ef/Ei = 1/4
C. The electric field strength is not effected by d and as long as σ is unchanged, Ef/Ei = 1
If you have a density of 100 kg/L, and a mass of 1000 units, tell me the following: First what are the mass units?
Answer:
The mas unit is the the 'Kilogram' written as 'kg'
Volume is 10 L
Explanation:
The complete question is
If you have a density of 100 kg/L, and a mass of 1000 units, tell me the following: First, what are the mass units?
Second, what is the volume
mass units is the 'Kilogram', written as 'kg'
density = mass/volume = 100 kg/L
the mass = 1000 kg
volume = mass/density = 1000/100 = 10 L
Which type of psychotherapy would seek to eliminate your fear of spiders by exposing you to pictures of spiders?
Answer:
cognitive behavioral therapy
Explanation:
What is the angle between a wire carrying an 8.40 A current and the 1.20 T field it is in, if 50.0 cm of the wire experiences a magnetic force of 2.55 N? ° (b) What is the force (in N) on the wire if it is rotated to make an angle of 90° with the field? N
Answer:
A. 30.38°
B 5.04N
Explanation:
Using
F= ILBsin theta
2 .55N= 8.4Ax 0.5mx 1.2T x sintheta
Theta = 30.38°
B. If theta is 90°
Then
F= 8.4Ax 0.5mx 1.2x sin 90°
F= 5.04N
Two long, parallel conductors, separated by 11.0 cm, carry currents in the same direction. The first wire carries a current I1 = 3.00 A, and the second carries I2 = 8.00 A.
(a) What is the magnetic field created by I1 at the location of I2?
(b) What is the force per unit length exerted by I1 on I2?
(c) What is the magnetic field created by I2 at the location of I1?
Explanation:
Given that,
Separation between two long parallel conductors, r = 11 cm = 0.11 m
Current in first wire, [tex]I_1=3\ A[/tex]
Current in second wire, [tex]I_2=8\ A[/tex]
(a) The magnetic field created by I₁ at the location of I₂ is given by :
[tex]B_{12}=\dfrac{\mu_o I_1}{2\pi r}\\\\B_{12}=\dfrac{4\pi \times 10^{-7}\times 3I_1}{2\pi \times 0.11}\\\\B_{12}=5.45\times 10^{-6}\ T[/tex]
(b) Magnetic force per unit length exerted by [tex]I_1[/tex] on [tex]I_2[/tex] is given by :
[tex]\dfrac{F}{l}=\dfrac{\mu_o I_1I_2}{2\pi r}\\\\\dfrac{F}{l}=\dfrac{4\pi \times 10^{-7}\times 3\times 8}{2\pi \times 0.11}\\\\\dfrac{F}{l}=4.36\times 10^{-5}\ N/m[/tex]
(c) The magnetic field created by I₂ at the location of I₁ is given by :
[tex]B_{21}=\dfrac{\mu_o I_2} {2\pi r}\\\\B_{12}=\dfrac{4\pi \times 10^{-7}\times 8}{2\pi \times 0.11}\\\\B_{12}=1.45\times 10^{-5}\ T[/tex]
Hence, this is the required solution.
Why are the meters squared in the formula to calculate acceleration?
Answer:
During acceleration, you are moving across a distance over a time, but also increasing how fast we are doing it. Therefore, it means by how many meters per second the velocity changes every second
Explanation:
A rock has mass 1.80 kg. When the rock is suspended from the lower end of a string and totally immersed in water, the tension in the string is 10.8 N . What is the smallest density of a liquid in which the rock will float?
Answer:
The density is [tex]\rho_z = 2544 \ kg /m^3[/tex]
Explanation:
From the question we are told that
The mass of the rock is [tex]m_r = 1.80 \ kg[/tex]
The tension on the string is [tex]T = 10.8 \ N[/tex]
Generally the weight of the rock is
[tex]W = m * g[/tex]
=> [tex]W = 1.80 * 9.8[/tex]
=> [tex]W = 17.64 \ N[/tex]
Now the upward force(buoyant force) acting on the rock is mathematically evaluated as
[tex]F_f = W - T[/tex]
substituting values
[tex]F_f = 17.64 - 10.8[/tex]
[tex]F_f = 6.84 \ N[/tex]
This buoyant force is mathematically represented as
[tex]F_f = \rho * g * V[/tex]
Here [tex]\rho[/tex] is the density of water and it value is [tex]\rho = 1000\ kg/m^3[/tex]
So
[tex]V = \frac{F_f}{ \rho * g }[/tex]
[tex]V = \frac{6.84}{ 1000 * 9.8 }[/tex]
[tex]V = 0.000698 \ m^3[/tex]
Now for this rock to flow the upward force (buoyant force) must be equal to the length
[tex]F_f = W[/tex]
[tex]\rho_z * g * V = W[/tex]
Here z is smallest density of a liquid in which the rock will float
=> [tex]\rho_z = \frac{W}{ g * V}[/tex]
=> [tex]\rho_z = \frac{17.64}{ 0.000698 * 9.8}[/tex]
=> [tex]\rho_z = 2544 \ kg /m^3[/tex]
Nuclear plants use radioactive fuel to produce steam which turns a turbine to generate electricity. This is an example of a(n) _____. A) heat pump B) heat mover C) internal combustion engine D) external combustion engine
Answer:
C) internal combustion engineExplanation:
What is the difference between matter and energy
Answer:
Everything in the Universe is made up of matter and energy. Matter is anything that has mass and occupies space. ... Energy is the ability to cause change or do work. Some forms of energy include light, heat, chemical, nuclear, electrical energy and mechanical energy.
Explanation:
How do you measure potential and kinetic energy?
Answer:
potential energy is a stored energy or energy of position (gravitational).
Kinetic energy is a energy of motion.
Explanation:
in the formula K is for the kinetic and the P stand for the potential.
The intensity of the waves from a point source at a distance d from the source is I. What is the intensity at a distance 2d from the source?
Answer:
The intensity at distance 2d from source is [tex]I_1 = \frac{1}{4} * I[/tex]
Explanation:
From the question we are told that
The distance of the wave from point source is d
The intensity is [tex]I[/tex]
The distance we are considering is 2d
Generally the intensity of a wave is mathematically represented as
[tex]I = \frac{ P }{\pi d^2 }[/tex]
Here P is power of point source
Now when d = 2d
[tex]I_1 = \frac{ P }{\pi (2d)^2 }[/tex]
[tex]I_1 = \frac{ 1 }{4 } * \frac{ P }{\pi d^2 }[/tex]
=> [tex]I_1 = \frac{1}{4} * I[/tex]
The intensity at a distance 2d from the source is equal to [tex]I'=\frac{I}{4}[/tex]
Given the following data:
Distance = dIntensity = ITo determine the intensity at a distance 2d from the source:
Mathematically, the intensity of a wave is given by the formula:
[tex]I=\frac{P}{\pi d^2}[/tex]
Where:
I is the intensity of a wave.P is the power.d is the distance.Since the distance is doubled (2d), we have:
Let the new intensity be [tex]I'[/tex][tex]I'=\frac{P}{\pi (2d)^2}\\\\I'=\frac{P}{4\pi (d)^2}\\\\I'=\frac{1}{4} \times \frac{P}{\pi (d)^2}\\\\I'=\frac{1}{4} \times I\\\\I'=\frac{I}{4}[/tex]
Find more information: https://brainly.com/question/23460034
In an experiment to measure the wavelength of light using a double slit, it is found that the fringes are too close together to easily count them. To spread out the fringe pattern, one could
Answer:
halve the slit separation
Explanation:
As we know that
In YDS experiment, the equation of fringe width is as follows
[tex]\beta = \frac{\lambda D}{d}[/tex]
where,
D denotes the separation in the middle of screen and slits
d denotes the distance in the middle of two slits
And to increase the Δx we have to decrease the d i.e, the distance between the two slits
Hence, the first option is correct
A charged particle moving through a magnetic field at right angles to the field with a speed of 25.7 m/s experiences a magnetic force of 2.98 10-4 N. Determine the magnetic force on an identical particle when it travels through the same magnetic field with a speed of 4.64 m/s at an angle of 29.2° relative to the magnetic field.
Answer:
The magnetic force would be:
[tex]F\approx 2.625\,\,10^{-5}\,\,N[/tex]
Explanation:
Recall that the magnetic force on a charged particle (of charge q) moving with velocity (v) in a magnetic field B, is given by the vector product:
F = q v x B
(where the bold represents vectors)
the vector product involves the sine of the angle ([tex]\theta[/tex]) between the vectors, so we can write the relationship between the magnitudes of these quantities as:
[tex]F=q\,v\,B\,sin(\theta)[/tex]
Therefore replacing the known quantities for the first case:
[tex]F=q\,v\,B\,sin(\theta)\\2.98\,\,10^{-4} \,\,N=q\,(25.7\,\,m/s)\,B\,sin(90^o)\\2.98\,\,10^{-4} \,\,N=q\,(25.7\,\,m/s)\,B\\q\,\,B=\frac{2.98\,\,10^{-4} }{25.7} \,\frac{N\,\,s}{m}[/tex]
Now, for the second case, we can find the force by using this expression for the product of the particle's charge times the magnetic field, and the new velocity and angle:
[tex]F=q\,v\,B\,sin(\theta)\\F=q\,(4.64\,\,m/s)\,B\,sin(29.2^o)\\F=q\,B(4.64\,\,m/s)\,\,sin(29.2^o)\\F=\frac{2.98\,\,10^{-4} }{25.7} \,(4.64\,\,m/s)\,\,sin(29.2^o)\\F\approx 2.625\,\,10^{-5}\,\,N[/tex]
A circular coil of wire 8.40 cm in diameter has 17.0 turns and carries a current of 3.20 A . The coil is in a region where the magnetic field is 0.610 T.Required:a. What orientation of the coil gives the maximum torque on the coil ?b. What is this maximum torque in part (A) ?c. For what orientation of the coil is the magnitude of the torque 71.0 % of the maximum found in part (B)?
Answer:
a) for the torque to be maximum, sin should be maximum
i.e (sinФ)maximum = 1
b) therefore the Maximum torque is
Tmax = 0.1838 × 1 = 0.1838 N.m
c) Given the torque is 71.0% of its maximum value; Ф = 45.24⁰ ≈ 45⁰
Explanation:
Given that; Diameter is 8.40 cm,
Radius (R) = D/2 = 8.40/2 = 4.20 cm = 0.042 m
Number of turns (N) = 17
Current in the loop (I) = 3.20 A
Magnetic field (B) = 0.610 T
Let the angle between the loop's area vector A and the magnetic field B be
Now. the area of the loop is;
A = πR²
A = 3.14 ( 0.042 )²
A = 0.005539 m²
Torque on the loop (t) = NIABsinФ
t = 17 × 3.20 ×0.005539 × 0.610 × sinФ
t = 0.1838sinФ N.m
for the torque to be maximum, sin should be maximum
i.e (sinФ)maximum = 1
therefore the Maximum torque is
Tmax = 0.1838 × 1 = 0.1838 N.m
Given the torque is 71.0% of its maximum value
t = 0.71 × tmax
t = 0.71 × 0.1838
t = 0.1305
Now
0.1305 N.m = 0.1838 sinФ N.m
sinФ = 0.1305 / 0.1838
sinФ = 0.71001
Ф = sin⁻¹ 0.71001
Ф = 45.24⁰ ≈ 45⁰
By what factor is the intensity of sound at a rock concert louder than that of a whisper when the two intensity levels are 120 dB and 20 dB respectively
Answer:
The intensity of sound at rock concert is 10¹⁰ greater than that of a whisper.
Explanation:
The intensity of sound is given by;
[tex]I(dB) = 10Log(\frac{I}{I_o} )[/tex]
where;
I is the intensity of the sound
I₀ is the threshold of sound intensity = 1 x 10⁻¹² W/m²
The intensity of sound at a rock concert
[tex]120 = 10Log(\frac{I}{1*10^{-12}} )\\\\12 = Log(\frac{I}{1*10^{-12}} )\\\\\frac{I}{1*10^{-12}} = 10^{12}\\\\I = 1*10^{-12} *10^{12}\\\\I = 1*10^0\\\\I =1 \ W/m^2[/tex]
The intensity of sound of a whisper
[tex]20 = 10Log(\frac{I}{1*10^{-12}} )\\\\2 = Log(\frac{I}{1*10^{-12}} )\\\\\frac{I}{1*10^{-12}} = 10^{2}\\\\I = 1*10^{-12} *10^{2}\\\\I = 1*10^{-10}\\\\I =10^{-10} \ W/m^2[/tex]
Thus, the intensity of sound at rock concert is 10¹⁰ greater than that of a whisper.
When the atmosphere is not quite clear, one may sometimes see colored circles concentric with the Sun or the Moon. These are generally not more than a few diameters of the Sun or Moon and invariably the innermost ring is blue. The explanation for these phenomena involves:_________
A) reflection
B) refraction
C) interference
D) diffraction
E) Doppler effect
Answer:
D) diffraction
Explanation:
Corona is an optical phenomenon produced by the diffraction of sunlight or moonlight, as light moves through water droplets in the atmosphere.
This phenomenon produces one or more diffuse concentric rings of light around the Sun or Moon, usually seen as colored circles.
Therefore, the explanation for these phenomena of colored concentric circles, sometimes seen with the Sun or the Moon involves diffraction.
What is the average value of the magnitude of the Poynting vector (intensity) at 1 meter from a 100-watt light bulb radiating in all directions
Answer:
I = 7.96 W / m²
Explanation:
The light bulb emits a power of P = 100W, this power is distributed over the surface of a sphere, thus the emission is in all directions.
Intensity is defined by power per unit area
I = P / A
The area of a sphere is
A = 4π r²
we substitute
I = P / (4π r²)
in this case it tells us that the distance is r = 1 m
let's calculate
I = 100 / (4π 1²)
I = 7.96 W / m²
A charged particle enters a magnetic field with an angle theta If theta equals 90 degrees what bath it will follow - If theta larger than zero and less than 90 degrees what path will it follow?
Given that,
A charged particle enters a magnetic field with an angle theta .
If [tex]\theta=90^{\circ}[/tex]
We know that,
If the angle is 90° then the charged particle enters perpendicular to the B.
B is magnetic field.
The charged particle will be follow of the circular path.
If the angle is greater than 0 and less than 90° then the charged particle will be show the helical path.
Hence, This is required answer.
13. A sinusoidal wave of frequency f is traveling along a stretched string. The string is brought to rest, and a second traveling wave of frequency 2f is established on the string. What is the wavelength of the second wave?
Answer:
It will be half that if the first wave
Explanation:
Because the wave speed remains the same, the result of doubling the frequency is that the wavelength is half as large as it
A planar electromagnetic wave is propagating in the +x direction. At a certain point P and at a given instant, the electric field of the wave is given by = (0.082 V/m) . What is the magnetic vector of the wave at the point P at that instant? (c = 3.0 × 108 m/s)
Answer:
[tex]B=2.74\times 10^{-10}\ T[/tex]
Explanation:
It is given that,
A planar electromagnetic wave is propagating in the +x direction.The electric field at a certain point is, E = 0.082 V/m
We need to find the magnetic vector of the wave at the point P at that instant.
The relation between electric field and magnetic field is given by :
[tex]c=\dfrac{E}{B}[/tex]
c is speed of light
B is magnetic field
[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.082}{3\times 10^8}\\\\B=2.74\times 10^{-10}\ T[/tex]
So, the magnetic vector at point P at that instant is [tex]2.74\times 10^{-10}\ T[/tex].
The magnetic vector of the wave at the point P at that instant is [tex]2.73 \times 10^{-10}T[/tex]
The formula relating electric field and the magnetic field is given as;
[tex]c=\frac{E}{B}[/tex]
E is the electric field strengthB is the magnetic vector of the wavec is the speed of lightFrom the formula shown:
[tex]B=\frac{E}{c}\\B=\frac{0.082}{3.0\times 10^8}\\B=2.73 \times 10 ^{-10}T[/tex]
Hence the magnetic vector of the wave at the point P at that instant is [tex]2.73 \times 10^{-10}T[/tex]
Learn more on magnetic field here: https://brainly.com/question/21040756
At the pizza party you and two friends decide to go to Mexico City from El Paso, TX where y'all live. You volunteer your car if everyone chips in for gas. Someone asks how much the gas will cost per person on a round trip. Your first step is to call your smarter brother to see if he'll figure it out for you. Naturally he's too busy to bother, but he does tell you that it is 2015 km to Mexico City, there's 11 cents to the peso, and gas costs 5.8 pesos per liter in Mexico. You know your car gets 21 miles to the gallon, but we still don't have a clue as to how much the trip is going to cost (in dollars) each person in gas ($/person).
Answer:
cost_cost = $ 96
Explanation:
In this exercise we have units in the groin system and the SI system, to avoid problems let's reduce everything to the SI system
performance = 21 miles / gallon (1,609 km / 1 mile) (1 gallon / 3,785 l)
perfomance= 8,927 km / l
now let's use a direct rule of proportions (rule of three). If a liter travels 8,927 km, how many liters are needed to travel the 2015 km
#_gasoline = 2015 km (1l / 8.927 km) = 225.72 liters
Now let's find the total cost of fuel. Ns indicates that $ 0.11 = 1 peso and the liter of fuel costs 5.8 pesos
cost_litre = 5.8 peso ($ 0.11 / 1 peso) = $ 0.638
cost_gasoline = #_gasoline cost_litro
cost_gasoline = 225.72 0.638
cost_gasoline = $ 144
This cost is for the one way trip, the total round trip cost is
cost_total = 2 cost_gasoline
cost_total = $ 288
Now let's look for the cost in the vehicle, you and two people will go, for which a total of 3 people will go, so the cost per person is
cost_person = total_cost / #_people
cost_person = 288/3
cost_cost = $ 96
Light passes from a material with index of refraction 1.3 into one with index of refraction 1.2. Compared to the incident ray, what happens to the refracted ray?
Answer:
It bends away from the normal
Explanation:
From Snell's law of Refraction, when a ray passes from a medium of lower Refractive index to a medium with higher Refractive index, the Refractive ray will bend towards the normal. However, when the ray passes from a medium of higher Refractive index to a medium of lower Refractive index, the Refractive ray will bend away from the normal.
Now, from the question we are told that Light passes from a material with index of refraction 1.3 into one with index of refraction 1.2.
This means from a higher Refractive index to a lower one and from Snell's law as earlier said, the refracted ray will bend away from the normal
The refracted ray is seen to bend away from the normal.
Let us recall that an optically denser medium will have a higher refractive index. This means that the medium with a refractive index of 1.3 is the denser medium and the medium with a refractive index of 1.2 is the less dense medium.
From the statement in the question, we can boldly say that light is travelling from a denser to less dense medium given the values of the refractive index given. When light is travelling from a denser to a less dense medium, the refracted ray bends away from the normal.
Learn more: https://brainly.com/question/1445383
