Answer:
but I don't know what the answesorryr
Answer:
the force of attraction between them???
A meterstick is placed on a pivot point of 42.5cm and a 45g mass is hung at the 20cm mark. When released the meterstick remains in static equilibrium. What is the mass of the meterstick
A flywheel in a motor is spinning at 510 rpm when a power failure suddenly occurs. The flywheel has mass 40.0 kg and diameter 75.0 cm . The power is off for 40.0 s , and during this time the flywheel slows down uniformly due to friction in its axle bearings. During the time the power is off, the flywheel makes 210 complete revolutionsAt what rate is the flywheel spinning when the power comes back on(in rpm)
Complete Question
A flywheel in a motor is spinning at 510 rpm when a power failure suddenly occurs. The flywheel has mass 40.0 kg and diameter 75.0 cm . The power is off for 40.0 s , and during this time the flywheel slows down uniformly due to friction in its axle bearings. During the time the power is off, the flywheel makes 210 complete revolutions. At what rate is the flywheel spinning when the power comes back on(in rpm)? How long after the beginning of the power failure would it have taken the flywheel to stop if the power had not come back on, and how many revolutions would the wheel have made during this time?
Answer:
[tex]\theta=274rev[/tex]
Explanation:
From the question we are told that:
Angular velocity [tex]\omega=510rpm[/tex]
Mass [tex]m=40.kg[/tex]
Diameter d [tex]75=>0.75m[/tex]
Off Time [tex]t=40.0s[/tex]
Oscillation at Power off [tex]N=210[/tex]
Generally the equation for Angular displacement is mathematically given by
[tex]\theta_{\infty}=\frac{w+w_0}{t}t[/tex]
[tex]w=\frac{2*\theta_{\infty}}{t}-w_0[/tex]
[tex]w=\frac{28210}{40*(\frac{1}{60})}-510[/tex]
[tex]w=120rpm[/tex]
Generally the equation for Time to come to rest is mathematically given by
[tex]t=(\frac{\omega_0}{\omega_0-\omega})t[/tex]
[tex]t=(\frac{510}{510-120rpm})(40.0)(\frac{1}{60})[/tex]
[tex]t=0.87min[/tex]
Therefore Angular displacement is
[tex]\theta =(\frac{120+510}{2})0.87[/tex]
[tex]\theta=274rev[/tex]
I just... I don't know man I suck at physics :(
A tour guide shouts across a canyon. At a temperature of 20 °C, her echo is heard 2.00 s later. How wide is the canyon?
The answer is 340 m I just don't know how to get that....
Explanation:
Sound travels from the tour guide to the other of the canyon and then back, thus hearing the echo. The time of 2.0 s represents the time it takes the sound to make a round trip, therefore it takes 1.0 s for the tour guide's voice to reach the other side of the canyon. At 20°C, the speed of sound is 343 m/s therefore the width of the canyon is
[tex]x = vt = (343\:m/s)(1.0\:s) = 343\:m[/tex]
The canyon in the given question is 340 m wide.
What is echo?Echo is a reflection of sound that comes to the listener after the direct sound, but with a delay. The delay is inversely proportional to the separation between the source and the listener of the reflecting surface.
To hear the echo, the following conditions must be met:
There must be a minimum of 17 meters between the sound source and the reflecting surface, and there must be at least 0.1 seconds between the original sound and its echo.
Given parameters:
When a tour guide shouts across a canyon, her echo is heard 2.00 s later. That means, in two seconds the sound goes to other wall of canyon and reflected back.
At a temperature of 20 °C, velocity of sound is 340 m/s.
So, the wide is the canyon be = velocity of sound × time/2
= 340 m/s ×2 s/2s = 340 m.
Hence, the wide is the canyon be 340 m.
Learn more about echo here:
https://brainly.com/question/26833784
#SPJ2
name 4 element of weather
Answer:
They are temperature, atmospheric pressure, wind, humidity, precipitation, and cloudiness. Together, these components describe the weather at any given time.
HELP ME ILL MARK U THE BRAINLIEST
Another box of weight 1500 N is raised vertically by 3.0 m
calculate the work done on the box
Answer:
[tex]workdone = force \times distance \\ = 1500 \times 3 \\ = 4500 \: joules[/tex]
Answer:
4,500J
Explanation:
Work done = force × distance
1500N × 3m = 4,500 Joules
If a rod attached to the approaching charge if the rod consists of "stiff" spring-like bonds for which atoms undergo small oscillations. What can we say, about these springlike bonds when the charge is first, furthest away and second, closest to the source charge
Answer: hello options related to your question is missing attached below is the missing part of your question
answer: No charge of the length of the bonds expected because the rod did not touch the charge source ( option A )
Explanation:
When the Charge is first, Furthest away and second and closest to the source charge. The spring like bonds can be said to have No charge of the length of the bonds expected because the rod did not touch the charge source when Furthest away the bond with charge will be less effective
What state of matter did the earth need to be in order for planetary differentiation to occur?
Answer: Gas, liquid, or solid?
8. A 22 g bullet with a speed of 230 m/s is fired in to a tree and comes to rest 23 cm into
the tree
a) Find the work done by the tree to stop the bullet
b) Find the average force exerted by the tree
Answer:
kinetic energy of 16 J. Determine the velocity of the first toy, and the mass of the ... distance of 12 cm into the tree. ... b) the average force exerted on the bullet while slowing down to a stop.
14 pages·317 KB
Why is using the same cutting and knife for both
cooked and uncooked food not a drisable?
Answer:
It spreads diseases.
Explanation:
But when cooked food is kept on the place where uncooked meat or food was kept the germs spread to the cooked food also and as the cooked food cannot be washed it harms us as we directly consume it.
How many stars in the star rating label of an electrical appliance should be used? Explain your answer.
Answer:
5 Stars
Explanation:
Because every Star from 1 to 5 vary energy consumption of the electrical device...So 5 star product uses a very less energy compared to 1 star product...
Hope it is helpful
There are 0 to 5 star are used in the star rating label of electrical appliance.
What is stars label in electrical appliance?The appliance is more energy efficient if it has more stars on the Energy Rating Label. To perform at the same level as comparable models of the same size or capacity, efficient appliances require less electricity. A model will use less energy and cost you less to run if it is more energy efficient.
Example a 3-star refrigerator saves a lot more energy compared to a 2 star.
Number of stars in the star rating label of an electrical appliance should be used is five for most efficient electrical device.
To learn more about electrical appliance refer to the link:
brainly.com/question/22640678
#SPJ2
Which variable is represented by the following symbol? ∑F
a. Normal Force
b. Applied Force
c. Weight
d. Net Force
Answer:
d.Net force
Explanation:
The net force is the force which is the sum of all the forces acting on an object simultaneously.
A 15.0 kg crate, initially at rest, slides down a ramp 2.0 m long and inclined at an angle of 20.0° with the horizontal. Using the work-kinetic energy theorem and disregarding friction, find the
velocity of the crate at the bottom of the ramp. (g = 9.81 m/s?)
The component of the crate's weight that is parallel to the ramp is the only force that acts in the direction of the crate's displacement. This component has a magnitude of
F = mg sin(20.0°) = (15.0 kg) (9.81 m/s^2) sin(20.0°) ≈ 50.3 N
Then the work done by this force on the crate as it slides down the ramp is
W = F d = (50.3 N) (2.0 m) ≈ 101 J
The work-energy theorem says that the total work done on the crate is equal to the change in its kinetic energy. Since it starts at rest, its initial kinetic energy is 0, so
W = K = 1/2 mv ^2
Solve for v :
v = √(2W/m) = √(2 (101 J) / (2.0 m)) ≈ 10.0 m/s
A bungee cord has a spring constant of 82.5 N/m. After jumping, a person oscillates with a period of 7.50 s. What is the mass of the person?
Answer:
Explanation:
T = 2π √ (m/k)
T / 2π = √ (m/k)
T√k = 2π √m
(T√k) / 2π = √m
( (T√k) / 2π)^2 = m
m = ( (7.5√82.5) / 2π)^2
m = 117.66 Kg
1 kg of rice is weighed by
Answer:
beam balance
Explanation:
A beam balance compares the sample mass with a standard reference mass
Liana draws a diagram to show the direction of the electric force acting on a charged particle in a uniform electric field.
Which change would make the diagram correct?
A. Changing the charge to negative
B. Making the field lines point down
C. Changing the force to point right
D. Removing the force arrow
Answer:
changing the force to point right is the correct answer :)
The direction of the force acting on the field should be changed to point towards the right.
What is an electric field?An electric field is referred to as the region where the influence of charge is felt. Thus, the force acts in the direction of the electric field when the field is uniform.
Having said that, it follows that the direction of the force acting on the field should be changed to point towards the right.
Learn more about electric field:https://brainly.com/question/15800304
#SPJ9
Derive the relation between wavelength, frequency and speed of sound.
Explanation:
sorry I need some points foe this
Which of the following describes a mixture?( 2 A combination of two or more substances O A combination of two sources of energy An object made of the same substance A substance that is made up of matter
Answer:
A combination of two or more substances.
A positively charged rod is brought close to a neutral metal sphere. Explain what
happens to the charges in the neutral sphere as the rod comes close, touches the
sphere, and then moves away. Is the metal sphere still neutral at the end of this
encounter?
Answer:
No, the metal sphere becomes positively charged because electrons are transferred from the sphere to the rod.
In the Vector Addition Lab, the following data was collected for determining the displacement from the door of the Physics classroom to another location in the building: 2 m, West; 14.0 m, South; 25.0 m, East; 11.0 m, North; and 2 m, West. The magnitude of the resultant displacement from the physics classroom to the assigned location is closest to ___ meters. (Round to the nearest integer.)
Answer:
21 m
Explanation:
Since the displacement from the door is 2 m West, we have our vector as -2i. The vector representing 14.0 m South is -14.0j. The vector representing 25.0 m East is 25.0i. The vector representing 11.0 m North is 11.0j. And, the vector representing 2.0 m West is -2.0i.
So, to get our position vector at the other location, we add all the vectors together.
So, r = -2i + (-14.0j) + 25.0i + 11.0j - 2i
= -4i + 25.0i - 14.0j + 11.0j
= 21.0i -3j m
Now, if we assume the position vector for the door is at the origin, we have r₀ = 0i + 0j m
So, our displacement from the door is r - r₀ = 21.0i - 3.0j - (0i + 0j) = 21.0i - 3.0j
So, the magnitude of the resultant displacement |r - r₀| = √(21.0² + 3.0²)
= 3.0√(7.0² + 1)
= 3.0√(49 + 1)
= 3.0√50
= 3.0 × 7.0711
= 21.2
≅ 21 m to the nearest integer
Choose the incorrect statement about the proton: Group of answer choices The proton has the atomic mass of 1 amu The proton has the same charge as the neutron. The proton has greater mass than an electron The proton and the neutron have approximately the same atomic mass
Answer:
The proton has the same charge as the neutron.
Explanation:
Because the proton has a positive charge whereas the neutron has no charge at all.
Define time period. Give its formula.
Answer:
Part A
Time period, designated by the symbol, 'T', is defines as the time it takes for a complete cycle of an oscillation or vibration (of a wave) to transit through a given point.
The longer the time period of a wave, the lower the frequency of the wave
The unit of the time period is seconds, 's'
Part B
Mathematically, the formula for the time period is presented as follows;
f = 1/T
∴ T = 1/f
f = v/λ
∴ T = λ/v
Where;
v = The velocity of the wave;
λ = The wavelength of the wave
Explanation:
Calcalculate potential energy given to a potato sack having a mass of 2 kg as I raise it to a height of 450 CM
Answer:
8.829 Joules
Explanation:
The potential energy of an object, is the energy it posses (the energy stored within the object) by virtue of its relative elevation or height, position, state, or arrangement
The potential energy of an object raised to a given height, P.E. = m·g·h
Where;
m = The mass of the object
g = The acceleration due to gravity, a constant ≈ 9.81 m/s²
h = The present height of the object
For the potato sack having a mass, m = 2 kg, and raised to a height, h = 450 cm = 0.45 m, we have;
The potential energy given to the potato sack, by raising its height, P.E. is given as follows;
P.E. = 2 kg × 9.81 m/s² × 0.45 m = 8.829 Joules
The potential energy given to the potato sack, P.E. = 8.829 Joules
A test car and its driver, with a combined mass of 600 kg, are moving along a straight,horizontal track when a malfunction causes the tires to stop rotating. The car skids to a halt with constant acceleration, leaving skid marks on the road during the whole time it skids. Which two of the following measurements, taken together, would allow engineers to find the total mechanical energy dissipated during the skid?
A. The length of the skid marks
B. The contact area of each tire with the track.
C. The coefficent of static frction between the tires and the track.
D. The coefficent of static frction between the tires and the track.
Answer:
The two of the following measurements, when taken together, would allow engineers to find the total mechanical energy dissipated during the skid
B. The contact area of each tire with the track.
C. The co-efficent of static friction between the tires and the track.
D. The co-efficent of static friction between the tires and the track.
Explanation:
What nuclear reaction is shown in the equation below
Answer:
nuclear fission
Explanation:
nuclear fission
Answer: Nuclear fission
Explanation:
A proton is moving toward a stationary charged particle. Which statement correctly describes an energy change that could occur as the particles get closer?
Answer:
Kinetic energy will be converted into electric potential energy if the stationary particle is positive.
Impulse is defined as a change in what?
a. Velocity
b. Direction
c. Inertia
d. Momentum
A 4.04 kg block slides down a smooth, frictionless plane having an inclination of 30◦. The acceleration of gravity is 9.8 m/s^2. The acceleration of the plane is 4.9
What is the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline?
Answer in units of N.
Answer:
Explanation:
What a lot of words to solve such a simple problem! The perpendicular force is the one that is pushing straight down on the plane. There is no side to side movement here or friction acting on this dimension at all. Perpendicular force is the same as the weight of the block. That's it! Perpendicular force is also normal force which is the same thing as weight:
w = mg so
w = (4.04)(9.8) and
w = 4.0 × 10¹ N
The magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N
The given parameter are:
mass M = 4.04 kg
Angle of inclination = 30 degree
Acceleration due to gravity = 9.8 m/s^s
To calculate the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the plane, The force will be the weight of the block which is equal to the normal reaction.
Normal N = mgcosФ
N = 4.04 x 9.8 x cos30
N = 34.28 Newtons
At all point in the plane, the magnitude of the perpendicular force that the block exerts on the surface of the plane will be the same.
Therefore, the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N
Learn more here : https://brainly.com/question/23944424
Let's say you want to start a fire using a mirror to focus sunlight. What would you do A) use a plane mirror. B) use a convex mirror , with the object to be ignited positioned at the center of curvature of the mirror. C) use a concave mirror, with the object to be ignited positioned at the center of curvature of the mirror. D) use a concave mirror, with the object to be ignited positioned halfway between the mirror and its center of curvature.
Answer:
A concave mirror is used.
Explanation:
start a fire using a mirror to focus sunlight.
A concave mirror is used as a light concentrator.
When the object is placed at the infinity, the image is formed at focus.
So, the light is focused at the focus and thus the fire is started.
hhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllllllllllllpppppppppppp
Answer:
I'm pretty sure the answer is broken
Explanation:
Types of energy transformation
Answer:
This is the types of energy transformation
Explanation:
hope it helps
