A hard-working human brain, perhaps one that is grappling with physical chemistry, operates at about 25 W (1 W = 1J s-'). What mass of glucose must be consumed to sustain that power output for an hour?

Answer: The law was applicable only to calcium. It could not include other elements beyond calcium.  With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.

Explanation:

YOUR WELCOME

Answer:

chelated zinc is more easily absorbed than zinc on it's own.

The standard reduction potential of the cathode half-reaction is -0.36V,

The standard reduction potential of the anode half-reaction is +0.34V,

and the standard potential of the cell is -0.02V.

The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):

Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.

The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):

Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:

E°cell = E°cathode - E°anode

= -0.36V - (+0.34V)

= -0.02V.

Learn more about the standard potential of the cell here:

https://brainly.com/question/19036092

#SPJ11

Answer:

a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde

CH3CH2OH + [O] → CH3CHO

b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene

CH3CH2OH + [O] → CH2=CH2 + H2O

c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal

CH3CH2CH2OH + [O] → CH3CH2CHO

d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)

(CH3)2CHOH + [O] → (CH3)2CO

e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal

CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO

f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal

Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O

(please could you kindly mark my answer as brainliest)

The compound that behaves as an acid when dissolved in water is HI (hydrogen iodide). Thus, the correct option will be D.

HI is an Arrhenius acid, meaning it produces hydrogen ions (H⁺) in aqueous solution. The compound that behaves as an acid when dissolved in the water Hydrogen iodide (HI). HI is a diatomic molecule and a colorless gas at room temperature.

Hydrogen iodide is a strong acid when dissolved in water, with a pKa of −10. Hydrogen iodide is also used as a reducing agent in organic chemistry in the production of iodinated compounds.

Learn more about Acids here:

https://brainly.com/question/29796621

#SPJ11

Answer:

Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.

To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.

If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.

To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.

Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.

The tests to distinguish aldehydes and ketones involve the addition of an oxidant. This is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst.

In general, aldehydes and ketones can be differentiated by the use of a wide range of chemical reagents. Tests for detecting these functional groups are usually based on their distinctive properties, such as the capacity to react with oxidizing agents or nucleophiles, which give different functional group products when they interact with aldehydes or ketones. Since these functional groups have differing properties, it is critical to employ distinct methods for their identification.

However, the use of oxidizing reagents to differentiate between aldehydes and ketones is one of the most frequent approaches. This is due to the presence of a hydrogen atom attached to the carbonyl group in aldehydes, which is readily oxidized by reagents such as Tollens' reagent (Ag2O/NH3) or Benedict's reagent (CuSO4 + NaOH). Hence, many tests to distinguish aldehydes and ketones involve the addition of an oxidant, this is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst. Therefore, the third option is the only correct one.

Learn more about ketones at:

https://brainly.com/question/30665943

#SPJ11

D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.

Answer:

This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse

Explanation:

hope its help you

Answer:

To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).

Volume of water = 125 mL = 0.125 L

Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:

Molarity = number of moles / volume of solution

Molarity = 2.00 mol / 0.125 L

Molarity = 16.0 M

Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.

(Please could you kindly mark my answer as brainliest)

In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.

A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.

A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.

Learn more about anode at:

https://brainly.com/question/17109743

#SPJ11

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.

The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:

5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O

To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.

Mass of Na₂C₂O₄ = 0.355 g

Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol

From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.

Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol

The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.

Molarity (M) = moles (n) / volume (V)

n = M × V

V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)

Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Learn more about Titration here: https://brainly.com/question/186765

#SPJ11

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.

in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.

learn more about solute in tank  here:

https://brainly.com/question/9589556

#SPJ4

The breakdown of 6.54 g of potassium chlorate results in the production of 4.81 x [tex]10^{22}[/tex]oxygen molecules.

The balanced chemical equation for the decomposition of potassium chlorate is:

2 KClO3(s) → 2 KCl(s) + 3 O2(g)

This equation tells us that for every 2 moles of potassium chlorate that decompose, 3 moles of oxygen gas are produced.

To determine the number of molecules of oxygen produced by the decomposition of 6.54 g of potassium chlorate, we first need to convert the mass of potassium chlorate to moles using its molar mass. The molar mass of KCLO₃ is:

K: 39.10 g/mol

Cl: 35.45 g/mol

O: 3(16.00 g/mol) = 48.00 g/mol

Total molar mass of KCLO₃: 39.10 + 3(35.45) + 48.00 = 122.55 g/mol

Number of moles of KCLO₃ = 6.54 g / 122.55 g/mol = 0.0533 mol

Now we can use the mole ratio from the balanced equation to calculate the number of moles of oxygen produced:

3 moles O₂ / 2 moles KCLO₃ = x moles O₂ / 0.0533 moles KCLO₃

x = 3/2 x 0.0533 = 0.0799 moles O₂

Finally, we can convert the number of moles of oxygen to the number of molecules using Avogadro's number:

Number of molecules of O2 = 0.0799 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol = 4.81 x [tex]10^{22}[/tex] molecules

Therefore, 4.81 x [tex]10^{22}[/tex] molecules of oxygen are produced by the decomposition of 6.54 g of potassium chlorate.

To learn more about  molecules  refer to:

brainly.com/question/14646440

#SPJ4

When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.

Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.

Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.

Learn more about celiac disease here: https://brainly.com/question/16779711

#SPJ11

The coefficient that goes in front of the ECA in the chemical reaction given above is 2.

It has been indicated that coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. The unbalanced chemical equation for the given reaction is:

[tex]E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} ) ECA[/tex]

The balanced equation of the chemical reaction above is:

[tex]2E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} )_{2} ECA[/tex]

We can see that 2 comes before ECA in the balanced chemical equation above. Therefore, the coefficient that goes in front of the ECA in the chemical reaction given above is 2.

More on chemical reaction coefficient: https://brainly.com/question/31143822

#SPJ11

If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).

This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.

In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.

To know more about equilibrium constant, refer here:

https://brainly.com/question/15118952#

#SPJ11

Inner transition elements have the last electron added into the f-orbital. Thus, the correct option will be C.

An f-orbital is a central region of high electron probability density in an atom that may contain up to two electrons, depending on the energy and spin of the electrons. It has a more complex shape than s, p, and d orbitals.

In atoms, the f-orbital's quantum number is l = 3. It has seven orbitals in total. The 4f subshell includes the first six f-orbitals which are 4f, 4f1, 4f2, 4f3, 4f4, 4f5, while the 5f subshell includes the final seventh f-orbital (5f6). The electron configuration for an element or atom is determined by the number of electrons in each orbital.

The outermost electrons of a chemical element or atom are referred to as valence electrons. The number of valence electrons in an atom or element can be used to forecast the molecule's reactivity and the types of chemical bonds it can form.

Learn more about f-orbital here:

https://brainly.com/question/14944601

#SPJ11

The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.

Let's understand this in detail:

1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.

2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.

3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.

4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.

5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.

5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.

Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825

#SPJ11

The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.

Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.

However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.

To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:

ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]

where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:

ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV

Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.

To know more about quantization click here:

brainly.com/question/17018137

#SPJ4

Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).

The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex]  (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).

learn more about Methanol, or CH3OH here:

https://brainly.com/question/14278895

#SPJ4

We use anhydrous diethyl ether since Grignard reagents react with O2 to form hydroperoxides, vapors from highly volatile diethyl ether solvent prevents O2 from reaching the reaction mixture. Option A is the correct answer.

Anhydrous diethyl ether is commonly used as a solvent in Grignard reactions. The main reason for using anhydrous diethyl ether is to prevent the Grignard reagent from reacting with moisture or oxygen in the air, which would lead to unwanted side reactions or a reduction in the yield of the desired product.

Diethyl ether is highly volatile, and its vapors help to exclude oxygen from the reaction mixture, preventing the formation of hydroperoxides. Additionally, diethyl ether helps to dissolve the reactants and stabilize the Grignard reagent, making it more reactive towards the substrate. Hence option A is correct.

To know more about diethyl ether, here

brainly.com/question/28623053

#SPJ4

the Rf value for your compound is 0.43.

The Rf value of a compound is the ratio of the distance that the compound traveled to the distance that the solvent traveled.

Therefore, in the given situation where you conducted a TLC experiment and found that your compound traveled 4.01 cm and the eluting solvent traveled 9.29 cm

The Rf value for your compound can be calculated as follows:

Rf value = Distance traveled by the compound / Distance traveled by the solvent

Rf value = 4.01 cm / 9.29 cm

Rf value = 0.43 (rounded off to two decimal places)

Therefore, the Rf value for your compound is 0.43.

To know more about Rf value click here:

https://brainly.com/question/17132198

#SPJ11

Answer: -230 N

Explanation:

The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:

F = k * (q1 * q2) / r^2

where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:

F = k * (q * (-q)) / r^2 = -k * q^2 / r^2

Substituting the given values of e and k, we get:

F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N

Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:

-230 N.

A compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

Bases are compounds that dissolve in water to form hydroxide ions (OH-). They are hydroxide ion donors, to be precise. Bases have a pH value greater than 7. The OH- ions are released when bases are dissolved in water. Sodium hydroxide (NaOH) is a good example of a base.

When NaOH is dissolved in water, it produces hydroxide ions (OH-) and sodium ions (Na+). As a result, the solution is more basic, and the pH is greater than 7. The following are some examples of bases:

Bases are commonly utilized in several chemical reactions. They're utilized as pH modifiers, reagents, and buffer solutions, among other things. They are also used in industries like cosmetics, detergents, and food. Furthermore, they are utilized in water treatment plants to control acidity levels and remove impurities.

Therefore, a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

To know more about hydroxide ions click here:

https://brainly.com/question/14619642

#SPJ11

Charged ions such as sodium, potassium, and chloride are called electrolytes.

Ions are atoms or molecules that have a positive or negative charge. They develop an electrical charge when an atom or molecule gains or loses one or more electrons, becoming an ion. Cations are ions with a positive charge, whereas anions are ions with a negative charge. The conductivity of fluids is due to charged ions like electrolytes.

Sodium, potassium, chloride, bicarbonate, calcium, and phosphate are examples of electrolytes that are vital for the body's daily function. Electrolytes play a significant role in maintaining the correct water balance and assisting in the transmission of electric impulses across cells.

For more such questions on electrolytes, click on:

https://brainly.com/question/17089766

#SPJ11