A chimpanzee sitting against his favorite tree gets up and walks 51 m due east and 39 m due south to reach a termite mound, where he eats lunch. (a) What is the shortest distance between the tree and the termite mound

Light energy is part of a larger form of energy known as electromagnetic energy. Details about electromagnetic energy can be found below.

Electromagnetic spectrum is the entire range of wavelengths of all known electromagnetic radiations extending from gamma rays through visible light, infrared, and radio waves, to X-rays.

Visible light is the part of the electromagnetic spectrum, between infrared and ultraviolet, that is visible to the human eye.

Therefore, Light energy is part of a larger form of energy known as electromagnetic energy.

Learn more about electromagnetic spectrum at: https://brainly.com/question/23727978

#SPJ1

Answer:

Upthrust on boat becomes lesser than Weight of boat

Explanation:

When there are more people than the capacity, The weight of the boat acting downwards increases. However, the upthrust acting on the submerged part of the boat is constant. Since Weight > Upthrust, there is a net force downwards, leading to sinking.

Answer:

a)     a = 27.44 m / s²,  b) a = 5.39 m / s², c)  a = 156.8 m / s², cabinet maximum acceleration does not change

Explanation:

a) In this exercise the wheels of the truck rotate to provide acceleration, but the contact point between the ground and the 2 wheels remains fixed, therefore the coefficient of friction for this point is static.

Let's apply Newton's second law

we set a regency hiss where the x axis is in the direction of movement of the truck

Y axis y

        N- W = 0

        N = W = m g

X axis

       2fr = m a

the expression for the friction force is

      fr = μ N

      fr = μ m g

we substitute

      2 μ m g = m /2   a

     a = 4 μ g

      a = 4 0.7 9.8

      a = 27.44 m / s²

b) let's look for the maximum acceleration that can be applied to the cabinet

       fr = m a

       μ N = ma

       μ m g = m a

       a = μ g

       a = 0.55  9.8

       a = 5.39 m / s²

as the acceleration of the platform is greater than this acceleration the cabinet must slip

c) the friction force is in the four wheels as well

With when the truck had two-wheel Thracian the weight of distributed evenly between the wheels, in this case with 4-wheel Thracian the weight must be distributed among all

applying Newton's second law

         4 fr = (m/4) a

         16 mg = (m) a

         a = 16 g

         a = 16 9.8

         a = 156.8 m / s²

cabinet maximum acceleration does not change

Answer: masses

Explanation:

Trust me

Answer:

5N

Explanation:

We have a simple problem of momentum here.

ΔMomentum= mΔv= FΔt

Solve for F

mΔv/Δt=F

Plug in givens

1*(2-1.5)/0.1=F

F=5N

The amount of force that the wall imparts on the ball is 5.0N

According to Newton's second law, the formula for calculating the force applied is expressed as:

[tex]F=ma[/tex]

m is the mass of the object

a is the acceleration of the object

Since acceleration is the change in velocity of an object, hence [tex]a=\frac{\triangle v}{t}[/tex]

The applied force formula becomes [tex]F=\frac{m\triangle v}{t}[/tex]

Given the following parameters

m = 1.0kg

[tex]\triangle v=2.0-1.5\\\triangle v=0.5m/s[/tex]

t = 0.1sec

Substitute the given parameter into the formula

[tex]F=\frac{1.0\times 0.5}{0.1}\\F=\frac{0.5}{0.1}\\F=5N[/tex]

Hence the amount of force that the wall imparts on the ball is 5.0N

Learn more here: https://brainly.com/question/17811936

Answer:

F = m g sin theta      force accelerating block

m a = m g sin theta

a = 9.8 sin 24 = 3.99 m/sec^2

The acceleration will increase by 61.3%.

Explanation:

The centripetal acceleration [tex]a_c[/tex] is given by

[tex]a_c = \dfrac{v^2}{r}[/tex]

If the velocity of the object increases by 27.0%, then its new velocity v' becomes

[tex]v' = 1.270v[/tex]

The new centripetal acceleration [tex]a'_c[/tex] becomes

[tex]a'_c = \dfrac{(1.270v)^2}{r} = 1.613 \left(\dfrac{v^2}{r} \right)[/tex]

[tex]\:\:\:\:\:\:\:\:\:= 1.613a_c[/tex]

Answer:

[tex]\frac{r_1}{r_2}=6.9[/tex]

Explanation:

According to Pascal's Law, the pressure transmitted from input pedal to the output plunger must be same:

[tex]P_1 = P_2\\\\\frac{F_1}{A_1}=\frac{F_2}{A_2}\\\\\frac{F_1}{F_2}=\frac{A_1}{A_2}\\\\\frac{F_1}{F_2}=\frac{\pi r_1^2}{\pi r_2^2}\\\\\frac{F_1}{F_2}=\frac{r_1^2}{r_2^2}[/tex]

where,

F₁ = Load lifted by output plunger = 2100 N

F₂ = Force applied on input piston = 44 N

r₁ = radius of output plunger

r₂ = radius of input piston

Therefore,

[tex]\frac{r_1^2}{r_2^2}=\frac{2100\ N}{44\ N}\\\\\frac{r_1}{r_2}=\sqrt{\frac{2100\ N}{44\ N}} \\\\\frac{r_1}{r_2}=6.9[/tex]

Answer:

1.66 N

Explanation:

The force of gravity of the moon on the body is given by

F = GMm/R² where G = universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of moon = 7.2 × 10²² kg, m = mass of body = 1 kg and R = radius of moon = 1.7 × 10⁶ m

Substituting the values of the variables into the equation, we have

F = GMm/R²

F = 6.67 × 10⁻¹¹ Nm²/kg² × 7.2 × 10²² kg × 1 kg/(1.7 × 10⁶ m)²

F = 48.024 × 10¹¹ Nm²/2.89 × 10¹² m²

F = 16.62 × 10⁻¹ N

F = 1.662 N

F ≅ 1.66 N

So, the gravity on the moon is 1.66 N

Answer: -5×10-3

Explanation:

E=kq/r

Answer:

Look at work

Explanation:

Θ= 4t^3+10t-40

a) In order to find ω, we need to find displacement so plug in t=2 to find Θ.

Θ= 4*8+20-40=12

use ω=Θ/t

Plug in values

ω=6 rad/s

b) In order to find α we use ω/t.

Plug in values

α=6/2= 3 rad/s^2

Answer: a rippling fountain

Explanation: diffuse reflection happens on rough surfaces, so using the process of elimination, that leaves us with b, a rippling fountain (I also just took this test I'm pretty sure I'm right)

Answer:

 B = 1.1413 10⁻² T

Explanation:

We use energy concepts to calculate the proton velocity

starting point. When entering the electric field

        Em₀ = U = q V

final point. Right out of the electric field

        em_f = K = ½ m v²

energy is conserved

       Em₀ = Em_f

       q V = ½ m v²

       v = [tex]\sqrt{2qV/m}[/tex]

we calculate

       v = [tex]\sqrt{\frac{ 2 \ 1.6 \ 10^{-19} \ 300}{1.67 \ 0^{-27}} }[/tex]

       v = [tex]\sqrt{632.3353 \ 10^8}[/tex]

       v = 25.15 10⁴ m / s

now enters the region with magnetic field, so it is subjected to a magnetic force

        F = m a

the force is

       F = q v x B

as the velocity is perpendicular to the magnetic field

       F = q v B

acceleration is centripetal

       a = v² / r

we substitute

       qvB =1/2  m v² / r

       B =  v[tex]\frac{m v}{2 q r}[/tex]

we calculate

       B = [tex]\frac{1.67 \ 10^{-27} 25.15 \ 10^4 }{1.6 \ 10^{-19} 0.23}[/tex]

       B = 1.1413 10⁻² T

Explanation:

The period T of a simple pendulum is given by

[tex]T = 2 \pi \sqrt{\dfrac{l}{g}}[/tex]

Doubling the length of the pendulum gives us a new period T'

[tex]T' = 2 \pi \sqrt{\dfrac{l'}{g}} = 2 \pi \sqrt{\dfrac{2l}{g}}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2} \left(2 \pi \sqrt{\dfrac{l}{g}} \right)[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2}\:T = \sqrt{2}(3.5\:\text{s})= 4.95\:\text{s}[/tex]

Answer:

The answer is "151.25 J and -547.64 J".

Explanation:

[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]

Using formula:

[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]

   [tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]

[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]

Calculating the Work by net force

[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]

The above work is converted into thermal energy.

Now,

[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]

Answer:

The work done is 13680.8 J.

Explanation:

The work done can be calculated as follows:

[tex] W = F*d [/tex]              

Where:            

F: is the force                                                        

d: is the displacement = 40 m                                    

The force acting on the boulder is given by:

[tex] F = mgsin(\theta) [/tex]

Where:

m: is the mass = 100 kg

g: is the acceleration due to gravity = 10 m/s²

θ: is the angle = 20°      

Then, the work is:

[tex] W = mgsin(\theta)d = 100 kg*10 m/s^{2}*sin(20)*40 m = 13680.8 J [/tex]

Therefore, the work done is 13680.8 J.  

I hope it helps you!  

Answer:

d

Explanation:

The minimum energy configuration in electrostatics states that Charges always reside on the surface of a conductor. If anyhow they were inside, an electric field would exist inside and would act to move them to the surface,  

Therefore, the drawing that shows where the charges reside when they are in equilibrium is a hollowed-out "hole" in the interior of the circle, with positive signs surrounding the exterior edge. This means that the d part is the correct answer.

Answer:

Centripetal Acceleration 18.75 m/s^2, Rotational Kinetic Energy 843.75 J

Explanation:

a Linear acceleration (we cant find tangential acceleration with the givens so we will find centripetal)

a= ω^2*r

ω= 300rev/min

convert into rev/s

300/60= 5rev/s

a= 18.75m/s^2

b) use Krot= 1/2 Iω^2

plug in gives

1/2(30*2.25)(25)= 843.75 J

Answer:

They established the laws of planetary motion. They explained how the Sun rises and sets. They made astronomy accessible to people who spoke Italian.

Explanation:

Answer:

The correct answer is "[tex]4.49\times 10^{10} \ joules[/tex]".

Explanation:

According to the question,

The work will be:

⇒ [tex]Work=-\frac{kQq}{R}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (18-30)\times 3\times 0.2}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (-12)\times 3\times 0.2}[/tex]

              [tex]=\frac{0.3978}{\varepsilon }[/tex]

              [tex]=4.49\times 10^{10} \ joules[/tex]

Thus the above is the correct answer.    

We have that the workdone  is mathematically given as

W=4.49*10e10 J

From the question we are told

Generally the equation for the workdone   is mathematically given as

W=-kQq/R

Therefore

0.3978/ε0 =-1/(4πε0*(18-30)*3*0.2

Hence

For more information on Charge visit

https://brainly.com/question/9383604

Answer:

7.5 kg

Explanation:

We are given that

[tex]m_1=10 kg[/tex]

Length of plank, l=3 m

Distance of fulcrum from one end of the plank=1 m

[tex]m_2=20 kg[/tex]

We have to find the mass must be on the other end if the plank remains balanced.

Let m be the mass must be on the other end if the plank remains balanced.

In balance condition

[tex]20\times 1=10\times (1.5-1)+m\times (1.5+0.5)[/tex]

[tex]20=10(0.5)+2m[/tex]

[tex]20=5+2m[/tex]

[tex]2m=20-5=15[/tex]

[tex]\implies m=\frac{15}{2}[/tex]

[tex]m=7.5 kg[/tex]

Hence, mass 7.5 kg   must be on the other end if the plank remains balanced.

Answer:

The mass at the other end is 7.5 kg.

Explanation:

Let the mass is m.

Take the moments about the fulcrum.

20 x 1 = 10 x 0.5 + m x 2

20 = 5 + 2 m

2 m = 15

m = 7.5 kg

Answer:

3

Explanation:

You must first make sure the equation is balanced. This one is. Then, you simply add up the coefficients of each compound on the products side of the equation. When the coefficient is not specified, you can assume it is 1 mole. So, in this equation, there is 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole of H₂O = 3 moles.

The reactant side of the equation also has three moles:

1 mole of CaCO₃ and 2 moles of HCl.

Answer:

Given, Apparent weight(W₂)=4.2N

          Weight of liquid displaced (u)=2.5N

          Let weight of body in air = W₁

Solution,

             U=W₁-W₂

              W₁=4.2=2.5=6.7N

∴Weight of body in air is 6.7N

Answer:

The work done on the block by the spring as it accelerates the block is 4kx².

Explanation:

Let initial distance is x.

It was compressed three times farther and then the block is released, new distance is 3x.

The work done in compressing the spring is given by :

[tex]W=\dfrac{1}{2}k(x_2^2-x_1^2)[/tex]

[tex]W=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\W=\dfrac{1}{2}k((3x)^2-x^2)\\\\W=\dfrac{1}{2}k((9x^2-x^2)\\\\W=\dfrac{1}{2}k\times 8x^2\\\\W=4kx^2[/tex]

So, the work done on the block by the spring as it accelerates the block is 4kx².

Answer:

P = 0.14 hp

Explanation:

The power required by the ship is given as:

[tex]P = \frac{Work}{Time} = \frac{Potential\ Eenrgy}{t}\\\\P = \frac{mgh}{t}[/tex]

where,

P = Power = ?

m = mass to pump = (12 lb)(1 kg/2.20 lb) = 5.44 kg

g = acceleration due to gravity = 9.81 m/s²

h = height = 2 m

t = time = 1 s

Therefore,

[tex]P = \frac{(5.44\ kg)(9.81\ m/s^2)(2\ m)}{1\ s}\\\\P = 106.8\ W[/tex]

Converting to horsepower (hp):

[tex]P = (106.8\ W)(\frac{1\ hp}{746\ W})[/tex]

P = 0.14 hp

Answer: hello tables and data related to your question is missing attached below are the missing data

answer:

a) I = I₁ = I₂ = I₃ = 0.484 mA

b) I₁ =  0.016 amps

   I₂ =  0.0016 amps

   I₃ = 7.27 * 10^-4 amps

c)  I₁ = 1.43 * 10^-3 amp

    I₂ =  0.65 * 10^-3 amps

Explanation:

A) magnitude of current for Part 1

Resistors are connected in series

Req = r1 + r2 + r3

       = 3300 Ω  ( value gotten from table 1 ) ,

          V = 1.6 V ( value gotten from table )

hence I ( current ) = V / Req = 1.6 / 3300 = 0.484 mA

The magnitude of current is the same in the circuit

Vi = I * Ri

B) magnitude of current for part 2

Resistors are connected in parallel

V = 1.6 volts

Req = [ ( R1 * R2 / R1 + R2 ) * R3 / ( R1 * R2 / R1 + R2 ) +  R3 ]

      = [ ( 100 * 1000 / 100 + 1000) * 2200 / ( 100 * 1000 / 100 + 1000 ) + 2200]

      = 87.30 Ω

For a parallel circuit the current flow through each resistor is different

hence the magnitude of the currents are

I₁ = V / R1 = 1.6 / 100 = 0.016 amps

I₂ = V / R2 = 1.6 / 1000 = 0.0016 amps

I₃ = V / R3 = 1.6 / 2200 = 7.27 * 10^-4 amps

C) magnitude of current for part 3

Resistors are connected in combination

V = 1.6 volts

Req = R1 + ( R2 * R3 / R2 + R3 )

       = 766.66 Ω

Total current ( I ) = V / Req = 1.6 / 766.66 = 2.08 * 10^-3 amps

magnitude of currents

I₁ = ( I * R3 ) / ( R2 + R3 ) = 1.43 * 10^-3 amps

I₂ = ( I * R2 ) / ( R2 + R3 ) = 0.65 * 10^-3 amps

Answer:

Answer in explanation

Explanation:

The force of attraction between two bodies is governed by Newton's Law of Gravitation:

[tex]F = \frac{Gm_1m_2}{r^2}[/tex]

where,

G = Universal Gravitational Constant

m₁ = mass of the first body

m₂ = mass of the second body

r = distance between the two bodies

F = Force

Hence, it is clear from the formula that the magnitude of the force is directly proportional to the product of the masses of the objects. So in the case of the earth and ourselves, the mass of the earth is very large in order of 10²⁴ kg. Due to this huge mass, the attraction between the earth and ourselves is so huge as compared to the attraction between two apples. Because the masses of the apple are very small in grams.

Answer:

W =  343.2 J

Explanation:

Given that,

Mass of bale of hay = 26 kg

Horizontal force exerted = 88 N

Distance moved, d = 3.9 m

Work done, W = Fd

Put all the values,

W = 88 N × 3.9 m

= 343.2 J

So, the work done is 343.2 J.