A ball with a mass of 0.5 kg is attached to one end of a light rod that is 0.5 m long. The other end of the rod is loosely pinned at a frictionless pivot. The rod is raised until it is vertical, with the ball above the pivot. The rod is released and the ball moves in a vertical circle. The tension in the rod as the ball moves through the bottom of the circle is closest to:

Answer:

I do not agree with the answer.

Because in reality, the atom has 2 main parts and 3 subatomic particles.

Explanation:

The parts of an atom are:

- The crust: It is the outer part of the atom and is the place where the electrons are.

- The nucleus: It is the central part of the atom and is the place that contains the protons and neutrons.

The subatomic particles of the atom are:

- Electrons: They are negatively charged particles that go in the atom's crust and are divided into specific sections.

- Protons: They are particles with a positive electric charge, the number of protons in the nucleus of an atom is what determines the atomic number of an element.

- Neutrons: They are atoms with no electric charge.

Answer:

find the sum of the inital and final velocitys and divide by 2 to find the average

Answer:

1 Watt

Explanation:

Power (P) = w / Δt

w = work done

Δt = change in time

Power (P) = 60kg / 60 seconds

Power (P) = 1 Watt

Answer:

266. 4

Explanation:

acceleration due to vravity on earth is 10m/s.

One third of it is (1/3)*10

=3.333m/s.

Weight is mass × acceleration

weight= 80kg÷ 3.333m/s

W= 266.4 Newton.

Answer:

because it has no balance

Explanation:

We hammer the broader side of a nail instead of its sharp end to put it in wood. It is a concept based on the pressure exerted.

The force acting per unit area of an object is called pressure exerted. It means that pressure is inversely proportional to the area of cross section i.e. area increases, pressure decreases and vice versa.

The broader side of a nail has more area as compared to the sharp end. It means that the broader side will exert less pressure on them which make it easier for us to fix it into the wood.

Answer:

Hay diversas leyes que podemos usar acá.

Acá sabemos que la vejiga aumenta su tamaño al reducir la presión, esto tiene sentido, pues al haber menos presión, hay menos fuerza que comprime la vejiga, lo que le permite aumentar su volumen.

Acá tenemos una relación inversa de la forma: V = K/P

Una relación inversa donde la presión esta en el denominador y K es un termino que no depende ni del volumen ni de la presión.

Entonces, a medida que aumenta P, el denominador aumenta, por lo que el valor del volumen decrece.

Un ejemplo de una ecuación similar es la del gas ideal, por ejemplo, para un gas ideal dentro de un globo de volumen V para una dada presión P:

V = nRT/P

donde n es el numero de moles, R es la constante termodinámica y T es la temperatura, acá podemos ver que esta ecuación tiene la misma forma fundamental que la escrita arriba.

Answer:

The comic microwave background

Explanation:

The cosmic microwave background is said to be part of the remnant of the Big Bang that happened which resulted in the formation of the universe. This is because the universe was thought to be a very hot place which resulted in the expansion of it.

The heat was said to have resulted in the cooling of gases present and the remnant of the heat is what formed the radiation called the cosmic wave background.

Answer:

The dust present in the clouds.

Explanation:

The complicated composition molecules that can be found in space are generally associated with clouds of dust. The significant amount of dust in these clouds provides protection not only for these molecules, but for any body that makes up or is associated with dust clouds.

It is exactly this dust that protects the molecules against the action of ultraviolet rays.

Answer:

Mass and distance

Explanation:

The force of gravity the masses exert on each other. If one of the masses is doubled, the force of gravity between the objects is doubled. increases, the force of gravity decreases. Hence, answer is mass and distance

Answer: C

Explanation: It's a lot of math.

The option that gives the correct value for the angle theta above the horizontal axis of the velocity of the body, v is option C.

C. 53.1°

The given parameters are;

The velocity of the body relative to the horizontal axis, vₓ = 6 m/s

The velocity of the body relative to the vertical axis, [tex]v_y[/tex] = 8 m/s

Required;

The measure of the angle theta above above the horizontal axis of the velocity of the body, v

Solution:

The velocity of the body can be represented vectorially as follows;

v = 6·i + 8·j

The vectoral form gives the legs of the right triangle that has the magnitude and direction as the hypotenuse side

Therefore;

[tex]\theta = arctan \left(\dfrac{8}{6} \right) \approx \underline{53.1^{\circ}}[/tex]

Learn more about the vectors here:

https://brainly.com/question/16854117

https://brainly.com/question/16958684

https://brainly.com/question/17097378

Answer:

Explanation:

Load ( L ) = 800 N

Effort ( E ) = 200 N

Load distance ( LD ) = 10 cm

Effort distance ( ED ) = ?

now, Let's find the effort distance:

[tex] \mathsf{L \times LD = E \times ED}[/tex]

Plug the values

[tex] \mathsf{800 \times 10 = 200 \times ED}[/tex]

Multiply the numbers

[tex] \mathsf{8000 = 200 \: ED}[/tex]

Swipe the sides of the equation

[tex] \mathsf{200 \: ED = 8000}[/tex]

Divide both sides of the equation by 200

[tex] \mathsf{ \frac{200 \: ED }{200} = \frac{8000}{200} }[/tex]

Calculate

[tex] \mathsf{ED \: = \: 40 \: cm}[/tex]

Hope I helped!

Best regards!

Answer:

The correct answer is

Explanation:

Character 1: Why are these comic books so hard to read? Can u read them?

Character 2: No it's easy to read Tigger. It's because you are an animal an I am a human being. U don't know how to read.

Hope this helps....

Have a nice day!!!!

Answer:

Dialogue 1:

Hey buddy! Can you tell me what is written in this book? Its really hard to read:(

Dialogue 2:

Yeah! Its a story about a friendly tiger! And it is hard for you to read cause you don't know how to read.

Tip:

Try to make it more engaging  :)

Answer:

114m

Explanation:

s=ut + 1/2 at^2

s=23 m/s ×3s + 1/2×3×3s^2×10m/s^2

= (69+45)m

= 114m

Explanation:

Hi, there!!

Energy is defined as the capacity or ability to do work. It's SI unit is Joule.

here,

Joule = (kg×m×m)/(s×s)

= kg×m^2/s^2.

Therefore, the derived unit is kg.m^2 by s^2.

Hope it helps...

Answer:

Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.

Explanation:

Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.

Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.

Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:-  flood parts and air vents

flood parts:- at the bottom position and allow water to enter or leave that tank.

air vents:- air vents at the top of the pressure hall,and that they submarine dive.

this time submarine is most modern system is depth is 300 to 450 meters,high pressure  air is 15 bar is tank air valve.

submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.

Answer:

The velocity and direction after 1 second is 8.1 m/s downwards

Explanation:

The equation of motion for an object in free fall can be written as follows;

v = u + g×t

Where;

v = The final velocity of the object

u = The initial velocity of the object = 0 m/s

g = The acceleration due to gravity = 9.81 m/s²

The velocity after one second is given by the velocity equation as follows;

v = 0 + 9.81 m/s² * 1 s = 9.81 m/s

The direction of the is downwards due to the attraction by the Earth's gravitational field which acts towards the Earth's center

Therefore, the velocity and direction after 1 second is 8.1 m/s downwards.

Answer:

The answers to your questions are given below

Explanation:

A. Definition of momentum.

Momentum of an object can be defined as the product of the mass of the object and its velocity. Mathematically, it expreessed as:

Momentum = mass x Velocity

From the above equation, we can derive the SI unit of momentum as follow:

Mass is measured in Kilogram (Kg)

Velocity is measured in meter per second (ms¯¹).

Momentum = mass x Velocity

Momentum = Kg x ms¯¹

Momentum = Kg•ms¯¹

Therefore, the SI unit of momentum is Kg•ms¯¹.

Bi. Determination of the force of the body from O to A.

Mass (m) = 5 kg

Velocity (v) = 40 ms¯¹

Time (t) = 2 secs.

Force (F) =?

Next, we shall determine the acceleration of the body.

Acceleration (a) = Velocity (v) /Time (t)

a = v /t

Velocity (v) = 40 ms¯¹

Time (t) = 2 secs.

Acceleration (a) =.?

a = v/t

a = 40/2

a = 20 ms¯²

Now, we can obtain the force as follow:

Mass (m) = 5 kg

Acceleration (a) = 20 ms¯²

Force (F) =?

Force (F) = mass (m) x Acceleration (a)

F = ma

F = 5 x 20

F = 100 N

Therefore, the force of the body from O to A is 100 N.

Bii. Determination of the force of the body from B to C.

Mass (m) = 5 kg

Velocity (v) = 40 ms¯¹

Time (t) = 10 – 6 = 4 secs.

Force (F) =?

Next, we shall determine the acceleration of the body.

Acceleration (a) = Velocity (v) /Time (t)

a = v /t

Velocity (v) = 40 ms¯¹

Time (t) = 4 secs.

Acceleration (a) =.?

a = v/t

a = 40/4

a = 10 ms¯²

Now, we can obtain the force as follow:

Mass (m) = 5 kg

Acceleration (a) = 10 ms¯²

Force (F) =?

Force (F) = mass (m) x Acceleration (a)

F = ma

F = 5 x 10

F = 50 N

Therefore, the force of the body from B to C is 50 N.

Answer:

B. 0.2 J/g/°C

Explanation:

The solid phase is the first segment (from 0°C to 50°C).

q = mCΔT

200 J = (20 g) C (50°C)

C = 0.2 J/g/°C

Explanation:

nitrogen fixation is the process by which nitrogen gas form the atmosphere is converted into different compound that can be used by plants and animal. there are three major ways in which this happens: first, by lightning, second by industrial methods and finally by bacteria living in the soil.

In a food web, the removal of any trophic level upsets the balance within the web and can cause its eventual collapse. Because producers capture solar energy and convert it to food energy, their loss would affect every other level of the food web.

The removal of the producers would cause the collapse of the entire food web. Primary consumers or herbivores, which feed on producers directly, would die off. The next to be affected would be the secondary consumers or carnivores that eat the primary consumers. Higher level consumers would suffer as organisms from lower trophic levels start to die off. Decomposers would break down the bodies of dead organisms, returning their basic elements and compounds to the environment. However, even these dead organisms would run out and the entire food web would collapse.

Hope you like the answer.

Answer:

0 m/s

Explanation:

Average velocity is displacement over time.

v_avg = Δx / Δt

Displacement is the distance between the start and the finish.

The circumference of the track is:

C = 2πr

C = 2π (7 m)

C ≈ 44 m

The distance covered by the object is:

d = vt

d = (11 m/s) (8 s)

d = 88 m

So the object travels 2 circumferences, meaning it ends back where it started.  Therefore, the displacement is 0 m, and the average velocity is 0 m/s.

Answer:

The correct answers are 2, 4

Explanation:

The dispersion of light occurs due to the interaction of electromagnetic radiation with matter, let's analyze the phenomenon, when a ray of light reaches a particle is absorbed and subsequently re-emitted in all directions, for radiation of lower wavelength (higher frequency ) the highest absorptions and therefore the missionary also the highest; An example of this is the blue light from the atmosphere, which is the absorption of blue light and its subsequent re-emission

Based on this explanation, the dispersion in gas particles or molecules is proportional to the frequency of the light (inversely proportional to the wavelength) and is also proportional to the number of dispersing particles in the air, that is, to the total volume of the particles. dispersers.

The correct answers are 2 and 4

Answer:

[tex]1.5 * 10^6[/tex]

Explanation:

Given

Digit: 1,500,000

Required

Represent using scientific notation

We start by expressing the given digit as a product of 1.5 and a multiple of 10

[tex]Digit = 1.5 * 1,000,000[/tex]

1,000,000 can be represented as 10⁶

So; the digit becomes

[tex]Digit = 1.5 * 10^6[/tex]

Hence, the scientific notation of 1,500,000 is 1.5 * 10⁶

Answer:

i) 60 W

ii) 100 W

Explanation:

In each case, the bulb that dissipates the most power is the bulb that glows brighter.  Power is voltage times current (P = VI).  Using Ohm's law, we can rewrite this as P = I²R or P = V²/R.

Bulbs are rated at a certain power for a certain voltage.  P = V²/R, so the bulb with the lower resistance will have the higher power rating.  Therefore, the 100 W bulb has a lower resistance than the 60 W bulb.

i) They are in series, so they have the same current.  P = I²R, so the bulb with the higher resistance will glow brighter.  That's the 60 W bulb.

ii) They are in parallel, so they have the same voltage.  P = V²/R, so the bulb with the lower resistance will glow brighter.  That's the 100 W bulb.

Answer:

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Explanation:

In this exercise they give us the force exerted by a magnet on an iron bar and ask us the force that the iron bar exerts on the magnet. We can see that these are action and reaction forces, which by Newton's third law must be of equal magnitude and opposite direction, each applied to one of the bodies.

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Answer:

Parallel processing

Explanation:

It is a parallel processing because it involves the brain processing many part of problem simultaneously.

The brain natural mode of information involves performing many task .

It is also ability of the brain to simultaneously process incoming stimuli or signals of different quality. It is a part of brain's vision and divide what is seen into four major parts which are color, motion, shape, and depth.

Answer: B)  Parallel processing

Answer:

True

Explanation:

This is in fact what the Archimedes principle states, and what he used in the famous anecdote about finding if  the crown of the King was really made of gold.

Explanation:

Given that,

Mass of a man, m = 75 kg

(1) We need to find the reading of the weighing machine when the lift is moving upwards with an acceleration of 2 m/s². When the lift is moving upward, reading of the weighing machine is given by :

R = m(g+a)

R = 75 (9.8+2)

R = 885 N

(2) When the lift is moving downwards with a constant velocity of 1.5m/s. It means that the lift is at rest. So, the reading is :

R = mg

R = 75 (9.8)

R = 735 N

(3) When the lift is moving downwards with an acceleration of 2.5 m/s². In this case,

R = m(g-a)

R = 75 (9.8-2.5)

R = 547.5 N

Hence, this is the required solution.