A ball has a mass of 4.65kg and approximates a ping pong ball of mass 0.060kg that is at rest by striking it in an elastic collision. The initial velocity of the bowling ball is 5.00m/s, determine the final velocities of both masses after the collision.

Answers

Answer 1

Answer:

Look at work

Explanation:

Elastic Collision: Ki=Kf

M1=4.65kg

M2: 0.060kg

v1=5m/s

v2=0m/s

4.65*5+0.060*0=4.65*v1'+0.060*v2'

23.25+0=4.65v1'+0.060v2'

Also since it is an elastic collision we can use

v1+v1'=v2+v2'

4.65+v1'=v2'

4.65+v1'=v2'

Substitute into the earlier equation

23.25=4.65v1'+0.060(4.65+v1')

Expand

23.25=4.65v1'+0.279+0.06v1'

Solve for v1'

22.971=4.71v1'

v1'=4.88m/s

v2'=4.65+4.88=9.53m/s


Related Questions

You want to swim from one side of a river to another side. Assume your speed is three miles per hour in the west direction, with negligible water velocity. When you reach a certain point, you will encounter water flow with a velocity of 6.2 miles per hour in the north direction. What is your resultant speed and direction

Answers

Answer:

speed = 6.71 mph and angle is 71.2 degree.

Explanation:

speed of person, u = 3 miles per hour

speed of water, v = 6 miles per hour

Resultant speed

[tex]V =\sqrt{v^2 + u^2}\\\\V = \sqrt{3^2 + 6^2}\\\\V = 6.71 mph[/tex]

The angle from the west is

tan A = 6/2 = 3

A = 71.6 degree

When you have a straight horizontal line on a velocity time graph, what does this tell you about the object’s motion in terms of velocity and acceleration?

Answers

Answer:

It tell you that the velocity is constant, what means that there's no acceleration

Earth’s Moon has a diameter of 3,474 km and orbits at an average distance of 384,000 km. At that distance it subtends and angle just slightly larger than half a degree in Earth’s sky. Pluto’s moon Charon has a diameter of 1,186 km and orbits at a distance of 19,600 km from the dwarf planet. Compare the appearance of Charon in Pluto’s skies with the Moon in Earth’s skies. Describe where in the sky Charon would appear as seen from various locations on Pluto.

Answers

The result of the comparison of the appearance of Charon on Pluto and   times the Moon from Earth is that; Charon as seen from Pluto appears approximately 7 times larger than the Moon

Charon is directly overhead from the side of Pluto locked to the side of Charon

Charon appears at the horizon from the poles of the axis of rotation of Jupiter around Charon

The reason for arriving at the above solutions is as follows:

The given dimensions and distance from the Earth of the Moon are;

The diameter of the Moon, d = 3,474 km

The average distance of the Moon from the Earth, R = 384,000 km

Required:

The comparison between Charon's appearance in Pluto and the Moon's appearance on Earth Earth

Solution:

The distance of the Moon's travels in an orbit, C = 2·π·R

∴ C = 2 × π × 384,000 km

The angle subtended by the Moon, θ = d/C × 360°

∴ θ = 3,474/(2 × π × 384,000) × 360° ≈ 0.518°

Pluto's moon Charon, has the following parameters;

The diameter of the Charon, d₂ = 1,186 km

The average distance of the Charon from Pluto, R₂ = 19,600 km

Therefore, the distance of the Moon's travels in an orbit, C₂ = 2·π·R₂

∴ C₂ = 2 × π × 19,600 km

The angle subtended by the Moon, θ₂ = d₂/C₂ × 360°

∴ θ₂ = 1,186/(2 × π × 19,900) × 360° ≈ 3.415°

The angle subtended by Charon in Pluto's sky ≈ 3.415°

Charon therefore, appears 7 times larger in Pluto's skies than the Moon's appearance in Earth's skies

Required:

The appearance of Charon as seen from different locations on Pluto

Solution:  

Charon is gravitationally locked to Pluto, therefore, the same side of Pluto is faced with the same side of Charon

Therefore;

Charon appears constantly overhead from the side of Pluto locked to CharonCharon appears constantly at the horizon from the poles on either side of the axis of rotation of Pluto and Charon

Learn more about Pluto's moon Charon here:

https://brainly.com/question/3920772

https://brainly.com/question/21590852

https://brainly.com/question/17177801

A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 2.40 s. Determine the x-component and the y-component of the rabbit's acceleration.

Answers

Answer:

the answer is nearly 5.655 [tex]ms^{-2}[/tex]

Explanation:

Given,

[tex]v_{x}=2.7 ms^{-1}[/tex]

[tex]v_{y}=13.3 ms^{-1}[/tex]

[tex]t=2.4 s[/tex]

[tex]a_{x}=\frac{2.7}{2.4}=1.125 ms^{-2}[/tex] (as  [tex]a=\frac{v-u}{t}[/tex])

[tex]a_{y}=\frac{13.3}{2.4}=5.542 ms^{-2}[/tex]

[tex]a=\sqrt{a_{x}^{2}+a_{y}^{2} }[/tex]

[tex]=\sqrt{1.125^{2}+5.542^{2} }[/tex]

[tex]=5.655 ms^{-2}[/tex]

hope you have understood this...

pls mark my answer as the brainliest

a standard bathroom scale is placed on an elevator. A 34 kg boy enters the elevator on the first floor and steps on the scale. What will the scale read (in newtons) when the elevator begins to accelerate upward at 0.4 m/s2

Answers

Answer:F = 255 N

Explanation:

It is given that,

Mass of the boy, m = 25 kg

Acceleration of the elevator,  

The elevator is accelerating in upward direction. The net force acting on the boy is given by :

g is the acceleration due to gravity

F = 255 N

The scale reading is 255 N as it begins to accelerate upward. hence, this is the required solution.

Question 3 of 10
What has the same value no matter where it is located in the universe?
A. Volume
B. Weight
C. Mass
D. Density
Reset Selection

Answers

Answer:

C. Mass

Explanation:

In order to test an intentionally weak adhesive, the bottom of the small 0.15-lb block is coated with adhesive and then the block is pressed onto the turntable with a known force. The turntable starts from rest at t = 0 and uniformly accelerates with a = 2 rad/s^2. If the adhesive fails at exactly t = 3 s, then determine:

a. the magnitude of the ultimate shear force that the adhesive supports
b. the angular displacement of the turntable at the time of failure

Answers

Answer:

answer

Explanation:

it is the answer which was presented in the year

What is the order of magnitude of the distance of Sun to nearest star in meters?

Answers

Answer:

Approximating the Milky Way as a disk and using the density in the solar neighborhood, there are about 100 billion stars in the Milky Way.

Explanation:

Since we are making an order of magnitude estimate, we will make a series of simplifying assumptions to get an answer that is roughly right.

Let's model the Milky Way galaxy as a disk.

The volume of a disk is:

V

=

π

r

2

h

Plugging in our numbers (and assuming that

π

3

)

V

=

π

(

10

21

m

)

2

(

10

19

m

)

V

=

3

×

10

61

m

3

Is the approximate volume of the Milky Way.

Now, all we need to do is find how many stars per cubic meter (

ρ

) are in the Milky Way and we can find the total number of stars.

Let's look at the neighborhood around the Sun. We know that in a sphere with a radius of

4

×

10

16

m there is exactly one star (the Sun), after that you hit other stars. We can use that to estimate a rough density for the Milky Way.

ρ

=

n

V

Using the volume of a sphere

V

=

4

3

π

r

3

ρ

=

1

4

3

π

(

4

×

10

16

m

)

3

ρ

=

1

256

10

48

stars /

m

3

Going back to the density equation:

ρ

=

n

V

n

=

ρ

V

Plugging in the density of the solar neighborhood and the volume of the Milky Way:

n

=

(

1

256

10

48

m

3

)

(

3

×

10

61

m

3

)

n

=

3

256

10

13

n

=

1

×

10

11

stars (or 100 billion stars)

Is this reasonable? Other estimates say that there are are 100-400 billion stars in the Milky Way. This is exactly what we found.

Answer:

Mercury, 46,001,272 km from the sun at the nearest point.

Explanation:

elastic wire extend by 1.ocm when a load on 20g range from It, what additional load will it be required Cause the futher extension of 2.0cm​

Answers

Answer:

40g

Explanation:

20g range > 1.0cm

Therefore,

40g range > 2.0cm

Do you believe in ghost​

Answers

Answer:

well its about our thinking but i do believe in ghost a little

A 1.50 kg book is sliding along a rough horizontal surface. At point A it is moving at 3.21 m/s , and at point B it has slowed to 1.25 m/s .
Part A
How much work was done on the book between A and B ?
Part B
If -0.750J of work is done on the book from B to C , how fast is it moving at point C ?
Part C
How fast would it be moving at C if 0.750J of work were done on it from B to C ?

Answers

I assume friction is the only force acting on the book as it slides.

(A) By the work-energy theorem, the total work performed on the book as it slides is equal to the change in its kinetic energy:

W = ∆K

W = 1/2 (1.50 kg) (1.25 m/s)² - 1/2 (1.50 kg) (3.21 m/s)²

W-6.56 J

(B) Using the work-energy theorem again, the speed v of the book at point C is such that

-0.750 J = 1/2 (1.50 kg) v ² - 1/2 (1.50 kg) (1.25 m/s)²

==>   v = 0.750 m/s

(C) Take the left side to be positive, then solve again for v.

0.750 J = 1/2 (1.50 kg) v ² - 1/2 (1.50 kg) (1.25 m/s)²

==>   v1.60 m/s

Two divers, G and H, are at depths 20 m and 40 m respectively
below the water surface in lake. The pressure on G is P, while
the pressure on H is P2 if the atmospheric pressure is equivalent
to 10 m of water, then the value of P2/P1 is.
A. 1.67.
B. 2.00.
C. 0.50.
D. 0.60.

Answers

Answer:

B

Explanation:

P1/P1 = 40/20

=2

A 150g copper bowl contains 220g of water, both at 20.0oC, A very hot 300 g copper cylinder is dropped into the water, causing the water to boil, with 5.00 g being converted to steam. The final temperature of the system is 100oC, Neglect energy transfers with the environment.
a) How much energy (in calories) is transfered to the water as heat?
b) How much to the bowl?
c) What is the original temperature of the cylinder?

Answers

We have that the  energy (in calories) is transferred to the water as heat,to the bowl and  the original temperature of the cylinder  is mathematically given as

Qw=20.3 kcal Q= 1.11 kcal Ti=873°C

Energy

Generally the equation for the   is mathematically given as

(a)

The heat transferred to the H20

Qw= CwMwdT+Lvms

Qw=((220g)(100°C-20.0T)+(539 caVg)(5.00 g)

Qw=20.3 kcal .

(b)

The heat transferred to the bowl is

Qb= CbmbdT

Q= (0.0923 cal/gC)(150g)(100°C-20.0°C)

Q= 1.11 kcal

(c)  

original temperature of the cylinder

-Qw- Qb = CcMc(T2-T1)

[tex]T1=\frac{Qw+Qm}{CcMc}+T2[/tex]

T1=873C

For more information on energy visit

https://brainly.com/question/21222010

Monochromatic light is incident on a metal surface and electrons are ejected. If the intensity of the light is increased, what will happen to the ejection rate and maximum energy of the electrons

Answers

Answer:

Increase the rate and the same maximum energy of the electrons

Explanation:

According to the photoelectric effect we can say:

The number of electrons, or the electric current, has a linear behaviour with the intensity of the light and a constant behaviour whit the frequency. Therefore, the rate of electrons increases.

The kinetic energy of the ejected electrons has a linear dependence on the frequency of the light and has a constant behaviour with the intensity. So, we can say there is the same maximum energy.

I hope it helps you!

A cylindrical wire made of an unknown alloy hangs from a support in the ceiling. You measure the relaxed length of the wire to be 16 m long; and the radius of the wire to be 3.5 m. When hang a 5 kg mass from the wire, you measure that it stretches a distance of 4 x 10 m The average bond length between atoms is 2.3 x 10^0 m for th alloy.

Required:
What is the stiffness of a typical interatomic bond in the alloy

Answers

Answer: hello  some of your values are wrongly written hence I will resolve your question using the right values

answer:

stiffness =  1.09 * 10^-6 N/m

Explanation:

Given data:

Length ( l ) = 16 m

radius of wire ( r ) = 3.5 m

mass ( m ) = 5kg

Distance stretched (  Δl ) = 4 * 10^-3 m ( right value )

average bond length ( between atoms ) = 2.3 * 10^-10 m ( right value)

first step : calculate the area

area ( A ) = πr^2 = π * ( 3.5)^2 = 38.48 m^2

        γ          = MgL / A Δl

                    = [ (5 * 9.81 * 16 ) / ( 38.48 * (4.3*10^-3) ) ]

                    = 784.8 / 0.165 = 4756.36 N/m^2

hence : stiffness =   γ  * bond length

                           =  4756.36 * 2.3 * 10^-10  = 1.09 * 10^-6 N/m

g Light that is incident upon the eye is refracted several times before it reaches the retina. As light passes through the eye, at which boundary does most of the overall refraction occur?

Answers

Answer

Explanation

:giác mạc

potential diffetence​

Answers

Answer:

6v

Explanation:

V=IR

V= 2* 3

V= 6 volts

Two masses of 3 kg and 5 kg are connected by a light string that passes over a smooth polley as shown in the Figure.
QL
Determine:
i. the tension in the string,
ii. the acceleration of each mass, and
iii. the distance each mass moves in the first second of motion if they start from rest​

Answers

i. [tex]T = 36.8\:\text{N}[/tex]

ii. [tex]a = 2.45\:\text{m/s}^2[/tex]

iii. [tex]x = 1.23\:\text{m}[/tex]

Explanation:

Let's write Newton's 2nd law for each object. We will use the sign convention assigned for each as indicated in the figure. Let T be the tension on the string and assume that the string is inextensible so that the two tensions on the strings are equal. Also, let a be the acceleration of the two masses. And [tex]m_1 = 3\:\text{kg}[/tex] and [tex]m_2 = 5\:\text{kg}[/tex]

Forces acting on m1:

[tex]T - m_1g = m_1a\:\:\:\:\:\:\:(1)[/tex]

Forces acting on m2:

[tex]m_2g - T = m_2a\:\:\:\:\:\:\:(2)[/tex]

Combining Eqn(1) and Eqn(2) together, the tensions will cancel out, giving us

[tex]m_2g - m_1g = m_2a + m_1a[/tex]

or

[tex](m_2 - m_1)g = (m2 + m_1)a[/tex]

Solving for a,

[tex]a = \left(\dfrac{m_2 - m_1}{m_2 + m_1}\right)g[/tex]

[tex]\:\:\:\:= \left(\dfrac{5\:\text{kg} - 3\:\text{kg}}{5\:\text{kg} + 3\:\text{kg}}\right)(9.8\:\text{m/s}^2)[/tex]

[tex]\:\:\:\:= 2.45\:\text{m/s}^2[/tex]

We can solve for the tension by using this value of acceleration on either Eqn(1) or Eqn(2). Let's use Eqn(1).

[tex]T - (3\:\text{kg})(9.8\:\text{m/s}^2) = (3\:\text{kg})(2.45\:\text{m/s}^2)[/tex]

[tex]T = (3\:\text{kg})(9.8\:\text{m/s}^2) + (3\:\text{kg})(2.45\:\text{m/s}^2)[/tex]

[tex]\:\:\:\:= 29.4\:\text{m/s}^2 + 7.35\:\text{m/s}^2 = 36.8\:\text{N}[/tex]

Assuming that the two objects start from rest, the distance that they travel after one second is given by

[tex]x = \frac{1}{2}at^2 = \frac{1}{2}(2.45\:\text{m/s}^2)(1\:\text{s})^2 = 1.23\:\text{m}[/tex]

RATIO of longest wavelengths corresponding to Lyman and Balmer series in hydrogen spectrum is:
1) 7/29
2) 9/31
3) 5/27
4) 5/23​

Answers

Answer:

[tex]5/27[/tex]

Explanation:

wavelengths for Lyman series

[tex]\lambda=\frac{1}{R(1-\frac{1}{4} })=\frac{4}{3R}[/tex]

wavelengths for Balmer series

[tex]\lambda_B=\frac{1}{R(\frac{1}{4}-\frac{1}{9}) } =\frac{1}{R(\frac{5}{36}) } =\frac{36}{5R}[/tex]

[tex]\frac{ \lambda_L}{ \lambda_B} =\frac{4}{3R} \times\frac{5R}{36} =5/27[/tex]

OAmalOHopeO

The ratio of longest wavelengths corresponding to the Lyman and Balmer series in the hydrogen spectrum is 5/27. The correct option is 3.

What is Lyman and Balmer series?

Lyman and Balmer series are sets of spectral lines in the emission spectrum of hydrogen, which result from the transitions of the electron from higher energy levels to lower energy levels.

The Lyman series consists of spectral lines that are produced by transitions of the electron from higher energy levels to the n=1 energy level. These transitions release energy in the form of ultraviolet photons. The lowest energy level in hydrogen is the n=1 energy level, which is also called the ground state. Therefore, the Lyman series includes the transition of the electron from any energy level greater than or equal to n=2 to the ground state.

The Balmer series consists of spectral lines that are produced by transitions of the electron from higher energy levels to the n=2 energy level. These transitions release energy in the form of visible photons. The lowest energy level in the Balmer series is the n=2 energy level. Therefore, the Balmer series includes the transition of the electron from any energy level greater than or equal to n=3 to the n=2 energy level.

Lyman and Balmer's series are named after the scientists who discovered them. The Lyman series is named after Theodore Lyman, an American physicist who discovered the series in 1906. The Balmer series is named after Johann Balmer, a Swiss mathematician who discovered the series in 1885.

Here in the Question,

The longest wavelength in the Lyman series of the hydrogen spectrum corresponds to the transition from the n = 2 energy level to the n = 1 energy level, while the longest wavelength in the Balmer series corresponds to the transition from the n = 3 energy level to the n = 2 energy level.

The wavelengths of these transitions can be calculated using the Rydberg formula:

1/λ = R(1/n1^2 - 1/n2^2)

where λ is the wavelength of the photon emitted, R is the Rydberg constant (1.097 × 10^7 m^-1), and n1 and n2 are the initial and final energy levels of the electron.

For the longest wavelength in the Lyman series, we have n1 = 2 and n2 = 1, so:

1/λ_lyman = R(1/2^2 - 1/1^2) = 3R/4

For the longest wavelength in the Balmer series, we have n1 = 3 and n2 = 2, so:

1/λ_balmer = R(1/3^2 - 1/2^2) = 5R/36

Therefore, the ratio of the longest wavelengths in the Lyman and Balmer series is:

λ_lyman/λ_balmer = (3R/4)/(5R/36) = 27/20

Simplifying this ratio gives:

λ_lyman/λ_balmer = 27/20

Multiplying both the numerator and denominator by 1/3R, we get:

λ_lyman/λ_balmer = (1/2)/(1/3) = 3/2

Therefore, the ratio of the longest wavelengths in the Lyman and Balmer series is 3:2, or 3/5 in fractional form. Simplifying this ratio gives:

λ_lyman/λ_balmer = 5/3

Taking the reciprocal of both sides, we get:

λ_balmer/λ_lyman = 3/5

Therefore, the correct answer is (3) 5/27.

To learn about the ratio of the minimum wavelength of Lyman and Balmer series click:

https://brainly.com/question/12725892

#SPJ2

which watch is more preferable for the measurement of time among pendulum, quartz and atomic watch

Answers

Answer:

pendulum, quartz

Explanation:

Which of the following measures is equal to 700 km?

Answers

Answer:

1km=1000m

700km=

700×1000=700000

=700000metres

hope this helps

What is hydroelectric power ?

Answer quickly..!

Answers

Answer:

It's electricity produced from hydropower. It's also a form of energy that controls the power of water motion.

Explanation:

One pro about hydroelectric power is that it's renewable energy. But one con about hydroelectric power is that it can impact the environment in a negative way.

A 69.0-kg astronaut is floating in space, luckily he has his trusty 28.0-kg physics book. He throws his physics book and accelerates at 0.0130 m/s2 in the opposite direction. What is the magnitude of the acceleration of the physics book?

Answers

Answer:

0.032 [tex]m/s^2[/tex]

Explanation:

Given :

Weight of the astronaut = 69 kg

Weight of the physics book = 28 kg

Acceleration of the astronaut = 0.0130 [tex]m/s^2[/tex]

The force that is applied on the astronaut :

[tex]F=ma[/tex]

   [tex]$=69 \times 0.013$[/tex]

   = 0.897 N

Therefore, by Newton's 3rd law, we know that the force applied on the physics book is also F = 0.897 N

Therefore, the acceleration of the physics book is given by :

[tex]$a = \frac{\text{Force on physics book}}{\text{mass of physics book}}$[/tex]

[tex]$a = \frac{0.897}{28}$[/tex]

a = 0.032 [tex]m/s^2[/tex]

Hence, the acceleration of the physics book is  0.032 [tex]m/s^2[/tex].

Answer:

The acceleration of astronaut is 5.27 x 10^-3 m/s^2.

Explanation:

mass of astronaut, M = 69 kg

Mass of book, m = 28 kg

acceleration of book, a = 0.013 m/s^2

Let the acceleration of astronaut is A.

According to the Newton's third law, for every action there is an equal and opposite reaction.

So, the force acting on the book is same as the force acting on the astronaut but the direction is opposite to each other.

M A = m a

69 x A = 28 x 0.013

A = 5.27 x 10^-3 m/s^2

The car has a mass of 0·50 kg. The boy
now increases the speed of the car to 6·0
ms-1 . The total radial friction between
the car and the track has a maximum
value of 7.0 N. Show by calculation that
the car cannot continue to travel in the circular path.

Answers

Answer:

A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.

The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.

What is meant by centripetal force ?

Centripetal force is described as the force applied to a body that is travelling in a circular motion and is pointed in the direction towards the center of the circular path.

Here,

Mass of the car, m = 0.5 kg

Velocity of the car, v = 6 m/s

Radial friction between the car and the track, f = 7 N

The necessary centripetal force for the car to execute the circular motion is provided by the maximum radial frictional force between the car and the track.

So, the condition that the car cannot continue to travel in the circular path is that the centripetal force required is greater than the maximum radial friction.

So,

mv²/r > f

0.5 x 6²/r > 7

Therefore, the radius of the circular track,

r < 18/7

r < 2.57 m

Hence,

The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.

To learn more about centripetal force, click:

https://brainly.com/question/14249440

#SPJ3

Two circular coils are concentric and lie in the same plane.The inner coil contains 120 turns of wire, has a radius of 0.012m,and carries a current of 6.0A. The outer coil contains 150turns and has a radius of 0.017 m. What must be the magnitudeand direction (relative to the current in the inner coil) ofthe current in the outer coil, such that the net magnetic field atthe common center of the two coils is zero?

Answers

Answer:

[tex]I_2=6.8A[/tex]

Explanation:

From the question we are told that:

Turns of inner coil [tex]N_1=120[/tex]

Radius of inner coil [tex]r_1=0.012m[/tex]

Current of  inner coil [tex]I_1=6.0A[/tex]

Turns of Outer coil [tex]N_2=150[/tex]

Radius of Outer coil [tex]r_2=0.017m[/tex]

Generally the equation for Magnetic Field is mathematically given by

[tex]B =\frac{ \mu N I}{2R}[/tex]

Therefore

Condition for the net Magnetic field to be zero

[tex]\frac{N_1* I_1}{( 2 * r_1 )}=\frac{N_2 * I_2}{2 * r_2}[/tex]

[tex]I_2=\frac{(N_1* I_1)*(( 2 * r_2)}{( 2 * r_1)*N_2}[/tex]

[tex]I_2=\frac{(120*6.0)*(( 2 * 0.017)}{( 2 * 0.012)*150}[/tex]

[tex]I_2=6.8A[/tex]

A race car goes from a complete stop at the start line to 150 miles per hour in 5 seconds. What is its acceleration? Show your work.

Answers

Answer:

Explanation:

150/5  = 30

30mph per 1 second

explain why our sweat is salty?​

Answers

Answer:

Sweat also contains ammonia and urea, which are produced by the body when it breaks down proteins from the foods you eat.

Hope this helps..

krichoffs law of current questions​

Answers

Answer:

Explanation:

       Kirchhoff's Current Law, often shortened to KCL, states that “The algebraic sum of all currents entering and exiting a node must equal zero.

           #I AM ILLITERATE

Which of the following describes an electric conductor

Answers

The following describes an electric conductor : A material that has low resistance and allows the charges to move freely. The correct option is D.

What is conductor?

A conductor is a material or metal which allows the electrons to flow through it. In other words, a conductor allows the current to pass through them.

A battery also called as the voltage source, provides sufficient voltage or energy to excite electrons in the conductor.

Opposition offered to the flow of current is called as the resistance. The electrical element used in the circuit is the resistor.

So, an electric conductor is a material that has low resistance and allows the charges to move freely.

Thus, the correct option is D.

Learn more about conductor.

https://brainly.com/question/18084972

#SPJ5

Light of a given wavelength is used to illuminate the surface of a metal, however, no photoelectrons are emitted. In order to cause electrons to be ejected from the surface of this metal you should: ___________

a. use light of the same wavelength but increase its intensity.
b. use light of a shorter wavelength.
c. use light of the same wavelength but decrease its intensity.
d. use light of a longer wavelength.

Answers

Answer:

use light of the same wavelength but decrease it's intensity

Other Questions
Com base nos conhecimentos construdos ao longo de sua formao, redija um texto dissertativo-argumentativo em norma padro da lngua portuguesa sobre o tema "Filosofia". Selecione, organize e relacione, de forma coerente e coesa, argumentos e fatos para defesa de seu ponto de vista. (faz sobre tica, de preferncia) Why is Senator Margaret Chase Smith addressing the U.S. Senate? To whom are the remarks delivered? Cite textual evidence to support youranswer Find the lateral surface area of thiscylinder. Round to the nearest tenth.r = 5 cm5 cmLSA = [ ? ] cm2Enter Which safety feature works to slow down nuclear-fission chain reactions?A. ProliferationB. Control rodsC. Cooling rodsD. Fuel rods Select the statement that correctly describes an endothermic process. a. The enthalpy change for the process is negative. b. Heat is lost by the system, but work is done on the system. c. The enthalpy of the products is higher than that of the reactants. d. The temperature change of the products is greater than that of the reactants. e. Heat is released by the system, to the surroundings. exponential function in the form y=ab^xy=ab x that goes through points (0, 13)(0,13) and (5, 416)(5,416). Terra Corp. is incorporated in Florida with its principal office in Destin. Phyllis is the president of Terra Corp. and owns 51% of its shares. A potential buyer approached Phyllis with an offer to purchase her shares. The buyer offered Phyllis an additional bonus if Phyllis would step down from her office as president. Phyllis approached her attorney to determine whether the agreement to sell her shares is valid. The attorney should advise Phyllis that: Question 5 can I have as much as you can do please Write the equation of the graph y= Can someone please help me with this? How does the Appalachian Mountains important to the US development Read the two excerpts from Governor George Wallace's inaugural address.As Thomas Jefferson said, "The God who gave us life, gave us liberty at the same time; no King holds the right of liberty in his hands."***The great writer, Rudyard Kipling, wrote of them, that: "There in the Southland of the United States of America, lives the greatest fighting breed of man . . . in all the world!"What technique makes both excerpts effective?A. They both quote historical figures.B. They both have a counterclaim that disproves facts.C. They both make an appeal to emotion.D. They both include the use of repetition. g ) If it is raining, a home security system detects an intruder with probability 0.70. If it is NOT raining, the probability becomes 0.92. The probability of rain on any 2 given day is 0.25. To test the system on a randomly chosen day, the system technician pretends to be an intruder. Given that the technician will NOT be detected, what is the probability that it is NOT raining Will mark brainlest helpppp pleaseeeee I muttered, knocking my knuckles through the glass, and stretchingan arm out to seize the importunate branch; instead of which, myfingers closed on the fingers of a little, ice-cold hand!Which figurative language is used in the sentence given? Can someone help me with this math homework please! Mycoplasmas which belong to Firmicutes are pleomorphic because: (2 pts) they have no cell walls they are low G C content Gram-positive bacteria they exhibit snapping division they reproduce asexually they produce endospores What is an iambic pentameter When the motion of one or both of the particles is at an angle to the line of impact, the impact is said to be ________ ..............is a piece of hardware used to provide data and instructions to a computer used for interaction and control. *Output device.Processing.input device.All of above.