A 18.0 L gas cylinder is filled with 6.20 moles of gas. The tank is stored at 33 ∘C . What is the pressure in the tank?
Express your answer to three significant figures and include the appropriate units.

Solution :

Spontaneous Process

A spontaneous process is defined as the process that occurs without the help of any external aid or inputs. A spontaneous process is a natural process which occurs naturally in the environment.

Non Spontaneous process

A non spontaneous process is a process which does not occur naturally. Some inputs are provided for the process to occur. Energy from external source is applied into the process to start the process.

The following processes are :

1. Melling of ice   ---- Spontaneous

2 Rusting of iron  --- Spontaneous

3. Marble going down the spiral.   --- spontaneous

4. Going up the hill  ---- Non spontaneous

5. Keeping the food fresh from spoilage​  --- Non spontaneous

Answer:

[tex]K=1.7x10^{-3}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly setting up the equilibrium expression for the given reaction, in agreement to the law of mass action:

[tex]K=\frac{[NO]^2}{[N_2][O_2]}[/tex]

Next, we plug in the given concentrations on the data table to obtain:

[tex]K=\frac{(0.034)^2}{(0.69)(0.98)}\\\\K=1.7x10^{-3}[/tex]

Regards!

Answer:

[tex]\boxed {\boxed {\sf 8.10 \ L}}[/tex]

Explanation:

This question asks us find the volume of a gas sample given a change in temperature. Since the pressure remains constant, we only are concerned with the variables of temperature and volume.

We will use Charles's Law. This states the volume of a gas is directly proportional to the temperature of a gas. The formula is:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

The gas starts at a volume of 2.70 liters and a temperature of 25.0 degrees Celsius.

[tex]\frac {2.70 \ L}{25.0 \textdegree C}=\frac{V_2}{T_2}[/tex]

The temperature is increased to 75.0 degrees Celsius, but the volume is unknown.

[tex]\frac {2.70 \ L}{25.0 \textdegree C}=\frac{V_2}{75.0 \textdegree C}[/tex]

We are solving for the volume at 75 degrees Celsius, so we must isolate the variable V₂.

It is being divided by 75.0 °C. The inverse operation of division is multiplication, so we multiply both sides of the equation by 75.0 °C.

[tex]75.0 \textdegree C *\frac {2.70 \ L}{25.0 \textdegree C}=\frac{V_2}{75.0 \textdegree C} * 75.0 \textdegree C[/tex]

[tex]75.0 \textdegree C *\frac {2.70 \ L}{25.0 \textdegree C}= V_2[/tex]

The units of degrees Celsius (° C) cancel.

[tex]75.0 *\frac {2.70 \ L}{25.0}= V_2[/tex]

[tex]75.0 *0.108 \ L = V_2[/tex]

[tex]8.1 \ L = V_2[/tex]

The original measurements have 3 significant figures, so our answer must have the same. Currently, the answer has 2. If we add another 0, the value of the answer does not change, but the number of sig figs does.

[tex]8.10 \ L = V_2[/tex]

The volume of this gas sample at 75.0 degrees Celsius is 8.10 Liters.

Answer:

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

Explanation:

The balanced reaction is:

2 KMnO₄ + 5 H₂C₂O₄ + 3 H₂SO₄ → K₂SO₄ + 2 MnSO₄ + 8 H₂O + 10 CO₂

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex]

In this case, 50 mL (0.05 L) of 0.1 M H₂C₂O₄ react. So, replacing the data in the definition of molarity:

[tex]0.1 M=\frac{number of moles of solute}{0.05 L}[/tex]

Solving:

number of moles of solute= 0.1 M*0.05 L

number of moles of solute= 0.005 moles

So, 0.005 moles of H₂C₂O₄ react.  Then you can apply the following rule of three: if by stoichiometry 5 moles of H₂C₂O₄ react with 2 moles of KMnO₄, 0.005 moles of H₂C₂O₄ react with how many moles of KMnO₄?

[tex]moles of KMnO_{4} =\frac{0.005moles of H_{2} C_{2} O_{4}* 2moles of KMnO_{4} }{5moles of H_{2} C_{2} O_{4} }[/tex]

moles of KMnO₄= 0.002 moles

Knowing that the molarity of KMnO₄ is 0.032 M, replacing in its definition and solving:

[tex]0.032 M=\frac{0.002 moles}{volume}[/tex]

[tex]volume=\frac{0.002 moles}{0.032 M}[/tex]

volume= 0.0625 L= 62.5 mL

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

Explanation:

Add water, Na2CO3 dissolves, filter, PbCO3 stays in the paper and dissolved Na2CO3 goes through as the solution. Dry the PbCO3 and you have the dry solid.

OR

Add water to dissolve then filter to obtain PbCo3 as you're residue and Na2Co3 as the filtrate. Dry the insoluble PbCo3 between filter papers and you obtain solid PbCo3

Stalactites and stalagmites form as ________ precipitates out of the water evaporating in underground caves.

Group of answer choices

hydrochloric acid

sodium bicarbonate

calcium carbonate

sodium chloride

sodium hydroxide

Answer:

calcium carbonate

Explanation:

A stalactite is an icicle-looking mould that is formed by the precipitation of natural minerals as a result of water dripping from the ceiling, hanging from a cave.

A stalagmites in the other hand, grows upwards and is also a mound that is formed by the deposits of minerals gotten by the water dripping on the floor of a cave.

Therefore, stalactites and stalagmites form as calcium carbonate precipitates out of the water evaporating in underground caves.

Explanation:

here's the answer to your question

b) (√)

c)(✓)

hsjdhfjdkskkshd

Answer:

There is no difference between the two.

Explanation:

They both show the same volume. But, adding decimal places shows the least count of the instrument used and is more acceptable when recording values in scientific experiments

Answer:

0.0063 mol

Explanation:

Step 1: Write the balanced combustion equation

C₈H₁₈(l) + 12.5 O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(g)

Step 2: Establish the appropriate molar ratio

According to the balanced equation, the molar ratio of C₈H₁₈ to CO₂ is 1:8.

Step 3: Calculate the number of moles of C₈H₁₈ needed to produce 0.050 moles of CO₂

0.050 mol CO₂ × 1 mol C₈H₁₈/8 mol CO₂ = 0.0063 mol C₈H₁₈

Answer:

c. C3H9N2O2

Explanation:

The empirical formula of a compound is defined as the simplest whole number ratio of atoms present in a molecule. To solve this question we need to convert the mass of each atom to moles. With the moles we can find the ratio as follows:

Moles N -Molar mass: 14.01g/mol-

0.420g N * (1mol/14.01g) = 0.0300 moles N

Moles O -Molar mass: 16g/mol-

0.480g O * (1mol/16g) = 0.0300 moles O

Moles C -Molar mass: 12.01g/mol-

0.540g C * (1mol/12.01g) = 0.0450 moles C

Moles H -Molar mass: 1.0g/mol-

0.135g H * (1mol/1g) = 0.135moles H

Dividing in the moles of N (Lower number of moles) the ratio of atoms is:

N = 0.0300 moles N / 0.0300 moles N = 1

O = 0.0300 moles O / 0.0300 moles N = 1

C = 0.0450 moles C / 0.0300 moles N = 1.5

H = 0.135 moles H / 0.0300 moles N = 4.5

As the empirical formula requires whole numbers, multiplying each ratio twice:

N = 2, O = 2, C = 3 and H = 9

And the empirical formula is:

Answer:

11.9g remains after 48.2 days

Explanation:

All isotope decay follows the equation:

ln [A] = -kt + ln [A]₀

Where [A] is actual amount of the isotope after time t, k is decay constant and [A]₀ the initial amount of the isotope

We can find k from half-life as follows:

k = ln 2 / Half-Life

k = ln2 / 27.7 days

k = 0.025 days⁻¹

t = 48.2 days

[A]  = ?

[A]₀ = 39.7mg

ln [A] = -0.025 days⁻¹*48.2 days + ln [39.7mg]

ln[A] = 2.476

[A] = 11.9g remains after 48.2 days

Answer:

4.858 g

Explanation:

Start with the formula

density = [tex]\frac{mass}{volume}[/tex]

density = 1.98 g/mL

volume = 2.45 mL

mass = ??

rearrange the formula to solve for mass

(density) x (volume) = mass

Add in the substitutes and solve for mass

1.98 g/mL x 2.45 mL = 4.858 g

Answer :

volume of a gas = weight * 22.4 l / gram molecular weight

volume of o2 = ?

weight given = 20.5 g

gram molecular weight of oxygen = 32 (because of 2 oxygen atoms )

volume of oxygen = 20.5 * 22.4 / 32

volume of oxygen = 14.35 liters  

Explanation:

hope this helps you

if wrong just correct me

Answer:

(B). it's metallic bonding

Answer:

Answer:

a) [tex]K_{2} S[/tex] and [tex]NH_{4} Cl[/tex] :

There are no insoluble precipitate forms.

b) [tex]Ca Cl_{2}[/tex] and [tex](NH_{4} )_{2} Co_{3}[/tex] :

There are the insoluble precipitates of [tex]CaCo_{3}[/tex]  forms.

c) [tex]Li_{2}S[/tex] and [tex]MnBr_{2}[/tex] :

There are the insoluble precipitates of [tex]MnS[/tex]  forms.

d) [tex]Ba(No_{3} )_{2}[/tex] and [tex]Ag_{2} So_{4}[/tex] :                        

As [tex]Ag_{2} So_{4}[/tex] is insoluble, therefore no precipitate forms.

e) [tex]Rb_{2}Co_{3}[/tex] and [tex]NaCl[/tex]:

There are no insoluble precipitates forms.

Explanation:

a)

Solubility rule suggests:- [tex]K_{2} S[/tex] ⇒ soluble, [tex]NH_{4} Cl[/tex] ⇒ soluble.

                                          KCl ⇒ soluble, [tex](NH_{4})_{2} S[/tex]  ⇒ soluble.

There are no insoluble precipitate forms.

b)

Solubility rule suggests:- [tex]Ca Cl_{2}[/tex] ⇒ soluble, [tex](NH_{4} )_{2} Co_{3}[/tex] ⇒ soluble.

                                        [tex]CaCo_{3}[/tex] ⇒ insoluble, [tex]NH_{4} Cl[/tex]  ⇒ soluble.

There are the insoluble precipitates of [tex]CaCo_{3}[/tex]  forms.

c)

Solubility rule suggests:- [tex]Li_{2}S[/tex] ⇒ soluble, [tex]MnBr_{2}[/tex] ⇒ soluble.

                                        [tex]LiBr[/tex] ⇒ soluble, [tex]MnS[/tex]  ⇒ insoluble.

There are the insoluble precipitates of [tex]MnS[/tex]  forms.

d)

Solubility rule suggests:- [tex]Ba(No_{3} )_{2}[/tex] ⇒ soluble, [tex]Ag_{2} So_{4}[/tex] ⇒insoluble.

As [tex]Ag_{2} So_{4}[/tex] is insoluble, therefore no precipitate forms.

e)

Solubility rule suggests:- [tex]Rb_{2}Co_{3}[/tex] ⇒ soluble, [tex]NaCl[/tex] ⇒ soluble.

                                        [tex]RbCl[/tex] ⇒ soluble, [tex]Na_{2} Co_{3}[/tex]  ⇒ soluble.

There are no insoluble precipitates forms.

Answer:

3

Explanation:

The electron shells are labelled as K,L,M,N,O,P, and Q or 1,2,3,4,5,6, and 7.

As we go from innermost shell outwards, this number denotes the number of subshell in the shell. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells.

Hence, M shell contains s,p and d subshells.

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Answer:

The correct equation is "[tex]\frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]".

Explanation:

According to the question,

Throughout an aqueous solution, [tex]Ni^{2+}[/tex] exist as [tex][Ni(H_2O)_4]^{2+}[/tex]

So,

⇒ [tex][Ni(H_2O)_4]^{2+} + 4NH_3 \rightleftharpoons [Ni(NH_3)_4]^{2+} + H_2O[/tex]

⇒ [tex]K_f = \frac{[Ni(NH_3)_4]^{2+}}{[Ni(H_2O)_4^{2+}] [NH_3]^4}[/tex]

Here, we have excluded [tex][H_2O][/tex] as concentration of water will be const.

Now,

This formation of [tex][Ni(NH_3)_4]^{2+}[/tex] proceeds via several steps,

Step 1:

⇒ [tex][Ni(H_2O)_4]^{2+}+NH_3 \rightleftharpoons [Ni(H_2O)_3 (NH_3)]^{2+} + H_2O[/tex]

⇒ [tex]K_1 = \frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

Answer:

Every atom of a given element has the same number of protons

The protons in the nucleus of the helium atom are held together by a force called the strong nuclear force.

Explanation:

Atoms are composed of electrons, protons and neutrons. The electron is negatively charged, protons are positively charged and the neutrons have no charge.

Electrons are found in shells while protons are found inside the atomic nucleus. Similar to electrostatic forces between electron and proton, protons of helium are held together by a strong nuclear blinding force.

Note that, all isotopes must have the same atomic number. This shows that they are all the same atom changed by differences in number of neutrons.

Explanation:

1. boiling and melting point

2. electrical conductivity

3. Bond strength

4. bond length

A covalent bond consists of negative electrons that are shared in between atoms. Because of this bond, they possess and manifest physical abilities, including electrical pressure/conductivity and lower melting points compared to ionic compounds.

Answer:

0.696 m

Explanation:

We'll begin by calculating the number of mole in 16.7 g of C₆H₁₂O₆. This can be obtained as follow:

Mass of C₆H₁₂O₆ = 16.7 g

Molar mass of C₆H₁₂O₆ = (6×12) + (12×1) + (6×16)

= 72 + 12 + 96

= 180 g/mol

Mole of C₆H₁₂O₆ =?

Mole = mass / molar mass

Mole of C₆H₁₂O₆ = 16.7 / 180

Mole of C₆H₁₂O₆ = 0.093 mole

Next, we shall convert 133.6 g of water to Kg. This can be obtained as follow:

1000 g = 1 Kg

Therefore,

133.6 g = 133.6 g × 1 Kg / 1000 g

133.6 g = 0.1336 Kg

Thus, 133.6 g is equivalent to 0.1336 Kg.

Finally, we shall determine the molality of the solution. This can be obtained as illustrated below:

Mole of C₆H₁₂O₆ = 0.093 mole

Mass of water = 0.1336 Kg

Molality =?

Molality = mole / mass of water (in Kg)

Molality = 0.093 / 0.1336

Molality = 0.696 m

Therefore, the molality of the solution is 0.696 m

Answer:  inference because she drew a conclusion based on evidence.

why?:

Because the evidence was that she heard the crashing sound, and then when she came into her room saw the broken window and baseball.

It was not an observation because she did not directly see the baseball going through the window

Answer:

MoO2

Explanation:

The empirical formula is defined as the simplest whole number ratio of atoms present in a molecule.

To solve this question we need to find the moles of Mo2O3. Twice these moles = Moles of Mo. With the moles of Mo we can find its mass.

The difference in masses between mass of new oxide and mass of Mo = Mass of oxygen. With the mass of oxygen we can find its moles and the empirical formula as follows:

Moles Mo2O3 -Molar mass: 239.9g/mol-

12.37g * (1mol / 239.9g) = 0.05156 moles Mo2O3 * (2mol Mo / 1mol Mo2O3) = 0.1031 moles of Mo

Mass Mo -95.95g/mol-:

0.1031 moles of Mo * (95.95g/mol) = 9.895g of Mo

Mass oxygen in the oxide:

13.197 - 9.895g = 3.302g Oxygen

Moles oxygen -Molar mass: 16g/mol-:

3.302g Oxygen * (1mol / 16g) = 0.206 moles O

Now, the ratio of moles O / moles Mo is:

0.206 moles O / 0.1031 moles Mo = 2

That means there are 2 moles of O per mole of Mo and the empirical formula of the new oxide is:

Answer:

1. Nitrate ions, NaNO3 - Sodium nitrate.

2. Sulphide ions, K2S - Potassium sulphide.

3. Sulphate ions, CaSO4 - Calcium sulphate.

4. Hydrogensulphite ions, NaHSO3 - Sodium hydrogensulphite.

5. Carbonate ions, CaCO3 - Calcium carbonate.

6. Hydrogencarbonate ions, KHCO3 - Potassium hydrogencarbonate.

7. Phosphite ions, PH3 - Hydrogen phosphite.

8. Nitride ions, NH3 - Hydrogen nitride ( ammonia ).

9. Ethanoate ions, CH3COONa - Sodium ethanoate.

10. Methanoate ions, HCOONa - Sodium methanoate.

11. Fluoride ions, HF - Hydrogen fluoride.

12. Chloride ions, KCl - Potassium chloride.

13. Bromide ions, HBr - Hydrogen bromide.

14. Iodide ions, NaI - Sodium iodide.

15. Phosphate ions, K3PO3 - potassium phosphate.

Ribose is a reducing sugar. A reducing sugar is a carbohydrate that can undergo a redox reaction, in which it donates electrons to another chemical species.

This is usually observed when the sugar opens its ring structure to form an aldehyde or ketone functional group.

Ribose, a five-carbon sugar, can form an open-chain structure with an aldehyde functional group. In this form, it can donate electrons and act as a reducing agent in certain chemical reactions, such as the reduction of other compounds like Benedict's reagent during laboratory tests for reducing sugars.

Learn more about Ribose, here:

https://brainly.com/question/34709209

#SPJ6

Answer:

See explanation

Explanation:

The relationship between the activation energy and rate of reaction is best captured by the Arrhenius equation;

k= Ae^-Ea/RT

Where;

k= rate constant

A= pre-exponential factor

Ea=activation energy

R= gas constant

T= temperature

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have a very high activation energy are markedly slow.

Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

The study of chemistry and bonds is called chemistry. There are two types of elements metal and nonmetals.

The correct answer is mentioned below.

The equation is as follows:-

[tex]k= Ae^{-Ea/RT[/tex] Where;

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have very high activation energy are markedly slow. Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

Hence, the correct answer is mentioned above.

For more information about the equation, refer to the link:-

https://brainly.com/question/1388366